Restrict the affinity set to the set of online processors. Make sure
the affinity set for an interrupt vector contains at least one online
processor.
Update #3269.
Quite some files in the bsps/m68k/genmcf548x mention a
Freescale_license.txt file. The file has been accidentally removed
during the source reorganization in 2018. This commit restores it and
moves it to the right location for licenses.
Update #4625.
There is not really anything left from the referenced cpuinit.c file
from MPC8260ads CPU initialization. So ignore that part of the header
during rework.
Update #4625.
This is required for ISA 2.0 support, see chapter
"Zicsr", Control and Status Register (CSR) Instructions, Version 2.0
in
RISC-V Instruction Set Manual, Volume I: RISC-V User-Level ISA
Exception handling should be enabled at all times during execution to
ensure that exceptions are not ignored which would cause further
problems. This separates use of the exception enable bit from use of the
interrupt enable bit in the machine status register so that they can be
manipulated independently.
A device tree binary has to be 8 byte aligned in memory. This is checked
since RTEMS commit 34052ef78c "libfdt: Add
FDT alignment check to fdt_check_header()".
Put the next character into the send buffer if the buffer is empty and
not when the last character has been sent out to the line. This improves
the performance slightly.
Before that patch, the receive path was faster than the transmit path.
Therefore a simple echo could drop characters on a busy connection.
With this patch sending and receiving has about the same performance so
that no characters are lost.
Fixes#4610
The driver didn't return with an error on (for example) a NACK on the
bus. This adds the expected error return. Due to the new case that a
transfer can be interrupted on an error, there were some new edge cases.
This patch therefore also fixes these edge cases by removing the
transfer_state that more or less duplicated the interrupt states.
Fixes#4592
Do some clean ups. Remove superfluous variables. Eliminate some overly
complex logic (information about transfer and remaining bytes has been
tracked redundantly in multiple variables).
This patch doesn't change the behavior of the driver.
Update #4592
