* bsp_specs: added crtend.o back to the endfiles. Otherwise,
C++ static constructors are not executed because the
call to __do_global_ctors_aux() is emitted into the .init
section by this endfile (yes, the endfile contributes to .init).
* gdb-init: Make the first hb temporary.
* network/network.c: Add support for reading the MAC address from
the FEC if set by the boot monitor. dBug does not do this unless
the network is used which is a shame.
* Makefile.am, irq/irq.c (removed), irq/irq_init.c:
Use shared exception/interrupt support from
libcpu/new-exceptions/bspsupport. NOTE: CHANGES MUST BE
TESTED ON REAL HARDWARE.
* Makefile.am, irq/irq.c, irq/irq.h, irq/irq_init.c:
use new exception/irq support from
libcpu/powerpc/new-exceptions/bspsupport
rather than borrowing from ../shared/vectors ../shared/irq
* Makefile.am, new-exceptions/bspsupport/README:
provide new irq_bspsupport.rel which was
split out of exc_bspsupport.rel to provide finer-grained
control over what BSPs want to use.
* include/bsp.h, startup/bspstart.c: Eliminate copies of the
Configuration Table. Use the RTEMS provided accessor macros to obtain
configuration fields.
* clock/clockdrv.c, include/bsp.h, startup/bspstart.c: Eliminate copies
of the Configuration Table. Use the RTEMS provided accessor macros to
obtain configuration fields.
* clock/clock.c, include/bsp.h, startup/bspstart.c: Eliminate copies of
the Configuration Table. Use the RTEMS provided accessor macros to
obtain configuration fields.
* clock/ckinit.c, include/bsp.h, startup/bspstart.c: Eliminate copies
of the Configuration Table. Use the RTEMS provided accessor macros to
obtain configuration fields.
* README, clock/ckinit.c, include/bsp.h, startup/bspstart.c: Eliminate
copies of the Configuration Table. Use the RTEMS provided accessor
macros to obtain configuration fields.
* shared/startup/bspstart.c, shared/startup/pretaskinghook.c: Eliminate
copies of the Configuration Table. Use the RTEMS provided accessor
macros to obtain configuration fields.
* README, include/bsp.h, startup/bspstart.c: Eliminate copies of the
Configuration Table. Use the RTEMS provided accessor macros to obtain
configuration fields.
* bsp_specs, include/bsp.h, startup/bspstart.c: Eliminate copies of the
Configuration Table. Use the RTEMS provided accessor macros to obtain
configuration fields.
* include/bsp.h, startup/bspstart.c, startup/bspstart.c.nocache:
Eliminate copies of the Configuration Table. Use the RTEMS provided
accessor macros to obtain configuration fields.
* bsp_specs, clock/clock.c, include/bsp.h, irq/irq.c,
startup/bspclean.c, startup/bspstart.c: Eliminate copies of the
Configuration Table. Use the RTEMS provided accessor macros to obtain
configuration fields.
* clock/clock.c, include/bsp.h, startup/bspstart.c,
startup/rtems-ctor.cc: Eliminate copies of the Configuration Table.
Use the RTEMS provided accessor macros to obtain configuration
fields.
* at91rm9200/clock/clock.c, lpc22xx/clock/clockdrv.c,
mc9328mxl/clock/clockdrv.c, s3c2400/clock/clockdrv.c: Eliminate
copies of the Configuration Table. Use the RTEMS provided accessor
macros to obtain configuration fields.
* mcf5206/clock/ckinit.c, mcf5272/clock/ckinit.c: Eliminate copies of
the Configuration Table. Use the RTEMS provided accessor macros to
obtain configuration fields.
* new-exceptions/e500_raw_exc_init.c: map DEC
exception to ASM_BOOKE_DEC_VECTOR instead of ASM_DEC_VECTOR.
Fixed wrong mapping of ASM_BOOKE_FIT_VECTOR
(was ASM_BOOKE_PIT_VECTOR).
