This patch changes the license to BSD-2 for all source files where the
copyright is held by Aeroflex Gaisler, Cobham Gaisler, or Gaisler Research.
Some files also includes copyright right statements from OAR and/or
embedded Brains in addition to Gaisler.
Updates #3053.
In SMP configurations, there may be no software interrupt handler
installed when the software interrupt is processed. Add the new
interrupt handler dispatch variant
bsp_interrupt_handler_dispatch_unlikely() for this special case.
This adds a BSP variant for the ZynqMP BSP family to support the
Innoflight CFC-400X platform. To properly support the CFC-400X, device
trees were added to the ZynqMP platform due to both the optional
management interface as well as alternate physical configuration of the
ethernet interfaces.
- see ARM DUI 0646C Arm Cortex-M7 Devices Generic User Guide
"The RELOAD value is calculated according to its use.
For example, to generate a multi-shot timer with a period
of N processor clock cycles, use a RELOAD value of N-1.
If the SysTick interrupt is required every 100 clock pulses,
set RELOAD to 99."
- see routines used in CMSIS project for reference
Close#4746.
This fixes a problem with parsing the FDT compatible property by
replacing the RISCV_CONSOLE_IS_COMPATIBLE macro with calls to
the fdt_stringlist_contains function. The macro only works when
the compatible FDT entry is a single string and not a list of
strings. The new call will compare each item in the string list.
Close#4728.
This patch adds new Raspberry pi 4B AArch64 BSP to the RTEMS Family. Currently
only LP64 ABI is supported. ILP32 is not supported. RAM starts from 0x80000 in
64Bit kernel mode and MMU from 0x0. All Raspberrypi Pi 4B models and Raspberry
Pi 400 are supported. All the IRQs are similiar to the older Raspberry pi 2 ARM
BSP.
Raspberry Pi 4B has 2 types of UARTs. Only PL011 serial is supported currently.
Mini-UART is not supported. Mini-UART is default UART on the board so it needs
to be disabled by adding "dtoverlay=disable-bt" to the config.txt. No support
for additional 4 PL011-UARTs on the board.
The raspberrypi.h includes many of the address required for the future
development of the RPi 4B BSP. This includes peripherals, ARM Timer, VideoCore
Timer, Watchdog, Mailbox, AUX, FIQs and IRQs.
If the bsp is integrated and supported a device tree
blob(dtb) then use dtb instead of using it from
the U-Boot (BSP_START_COPY_FDT_FROM_U_BOOT=False).
The Microchip PolarFire SoC support is implemented as a
riscv BSP variant to boot with any individual hart(cpu core)
or SMP based on the boot HARTID configurable and support
components are 4 CPU Cores (U54), Interrupt controller (PLIC),
Timer (CLINT), UART.
Add the basic Microchip PolarFire SoC device tree source and blob
The mpfs-dtb.h is generated by the bin2hex
https://github.com/padmaraob/bin2hex
1.Compile and build the bin2hex.c
$ gcc -o bin2hex bin2hex.c
2.Generate the mpfs.dtb from the mpfs.dts
$ dtc -O dtb -o mpfs.dtb mpfs.dts
3.Generate the mpfs-dtb.h Header file from the mpfs.dtb.
$ ./bin2hex mpfs.dtb
Note: Resending after learning how to use git send-email, please disregard previous message.
This fixes the riscv fe310 console driver fe310_uart_read function. The function
reads the RX status/data register to check if data is available, but discards
the data and reads it a seconds time.
Also cleared the interrupt enable bit in the first_open function.
Close#4719
The VRSAVE feature of the Altivec unit can be used to reduce the amount of
Altivec registers which need to be saved/restored during interrupt processing
and context switches.
In order to use the VRSAVE optimization a corresponding multilib (-mvrsave) is
required, see GCC configuration. The -mvrsave option must be added to the
ABI_FLAGS of the BSP.
Currently only the -mcpu=e6500 based QorIQ BSP support this optimization.
Update #4712.
Added support for Cobham Gaisler NOEL-V systems. The NOEL-V support
is implemented as a riscv BSP. Both 32-bit and 64-bit processor
systems are supported. Cobham Gaisler's NOEL-V RISC-V processor IP
is described here:
https://www.gaisler.com/NOELV
Compatible with the following NOEL-V FPGA example design ranges
available from Cobham Gaisler. Follow the links for free
bit-streams, DTS/DTB, user's manuals and quick-start guides:
- NOEL-ARTYA7-EX (https://www.gaisler.com/NOEL-ARTYA7)
- NOEL-PF-EX (https://www.gaisler.com/NOEL-PF)
- NOEL-XCKU-EX (https://www.gaisler.com/NOEL-XCKU)
Uses the shared GRLIB APBUART console driver "apbuart_termios.c".
APBUART devices are probed using device tree.
Closes#4225.
The ABI flags for the amd64 BSP contain the -Werror=return-type flag. There is no reason for this to be there so it has been removed. The same option has also been removed amd64.cfg file.
- Support DDRMC0 region 0 up to 2G in size
- Support DDRMC0 region 1 with DDR memory greater than 2G
up to the DDRMC0 max amount
- Extend the heap with region 1's memory
Closes#4684
This alters the AArch64 page table generation and mapping code and MMU
configuration to use page table level 0 in addition to levels 1, 2, and
3. This allows the mapping of up to 48 bits of memory space and is the
maximum that can be mapped without relying on additional processor
extensions. Mappings are restricted based on the number of physical
address bits that the CPU supports.
