2003-09-26 Till Straumann <strauman@slac.stanford.edu>

PR 497/bsps
	* BOOTING: Document letting the bootloader shut down the
	network interface since it continues to run after loading
	RTEMS application and has to be dealt with.

c/src/lib/libbsp/powerpc/motorola_powerpc/BOOTING

@@ -6,6 +6,24 @@ This file documents the on board monitor (PPCBUG) configuration used
 to be able to boot the archives located in powerpc-rtems/c/mcp750/bin.
 This information was provided by Eric Valette <valette@crf.canon.fr>
 
+NOTE (by Till Straumann <strauman@slac.stanford.edu>, 2003):
+Apparently, PPCBug fails to shut down the network interface after
+loading an image. This means that the ethernet chip is still able
+to write into its descriptors and network buffer memory which
+can result in the loaded system to be corrupted if that system
+relocates itself!. The proper place to shut down the interface
+would be PPCBug itself or a 'PPCBug startup script' - unfortunately,
+PPCBug doesn't offer such a feature. Therefore, the bootloader
+is by default compiled with the
+#ifdef USE_PPCBUG
+compile-time option ENABLED. It will then use a PPCBug system
+call to shut down the ethernet chip during an early stage of
+the boot process.
+NOTE: THIS (i.e. the system call) WILL FAIL IF YOU USE SOFTWARE
+OTHER THAN PPCBUG TO BOOT THE BSP. In such a case, you must
+recompile with #undef USE_PPCBUG and make sure the ethernet
+interface is quiet by other means.
+
 ----------------------- ENV command--------------
 PPC1-Bug>env
 Bug or System environment [B/S] = B? 

c/src/lib/libbsp/powerpc/motorola_powerpc/ChangeLog

@@ -1,3 +1,10 @@
+2003-09-26  Till Straumann <strauman@slac.stanford.edu>
+
+	PR 497/bsps
+	* BOOTING: Document letting the bootloader shut down the
+	network interface since it continues to run after loading
+	RTEMS application and has to be dealt with.
+  
 2003-09-19	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
 
 	* bsp_specs: Remove *lib:.