2009-08-26 Joel Sherrill <joel.sherrill@oarcorp.com>

* Makefile.am, startup/bspstart.c: Rename BSP specific idle thread to
	bsp_idle_thread and split into its own file.
	* startup/bspidle.c: New file.

c/src/lib/libbsp/powerpc/gen5200/ChangeLog

@@ -1,3 +1,9 @@
+2009-08-26	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* Makefile.am, startup/bspstart.c: Rename BSP specific idle thread to
+	bsp_idle_thread and split into its own file.
+	* startup/bspidle.c: New file.
+
 2009-08-24	Joel Sherrill <joel.sherrill@oarcorp.com>
 
 	* include/bsp.h, startup/bspstart.c: Rename _Thread_Idle_body to

c/src/lib/libbsp/powerpc/gen5200/Makefile.am

@@ -116,6 +116,7 @@ libbsp_a_SOURCES += ../../shared/bootcard.c \
 	../../shared/bspclean.c \
 	startup/bspreset.c \
 	../../shared/bspgetworkarea.c \
+	startup/bspidle.c \
 	startup/bspstart.c \
 	startup/cpuinit.c  \
 	startup/uboot_support.c

c/src/lib/libbsp/powerpc/gen5200/startup/bspidle.c

@@ -0,0 +1,38 @@
+/*===============================================================*\
+| Project: RTEMS generic MPC5200 BSP                              |
++-----------------------------------------------------------------+
+| Partially based on the code references which are named below.   |
+| Adaptions, modifications, enhancements and any recent parts of  |
+| the code are:                                                   |
+|                    Copyright (c) 2005                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
++-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
++-----------------------------------------------------------------+
+| this file contains the BSP initialization code                  |
+\*===============================================================*/
+
+#include <rtems.h>
+/*
+ *  bsp_idle_thread
+ *
+ *  The MSR[POW] bit is set to put the CPU into the low power mode
+ *  defined in HID0.  HID0 is set during starup in start.S.
+ */
+void *bsp_idle_thread( uintptr_t ignored )
+{
+  for(;;) {
+    asm volatile(
+      "mfmsr 3; oris 3,3,4; sync; mtmsr 3; isync; ori 3,3,0; ori 3,3,0"
+     );
+  }
+  return 0;
+}

c/src/lib/libbsp/powerpc/gen5200/startup/bspstart.c

@@ -193,22 +193,3 @@ void bsp_start(void)
     printk("Exit from bspstart\n");
   #endif
 }
-
-/*
- *
- *  bsp_idle_thread
- *
- *  Replaces the one in c/src/exec/score/src/threadidlebody.c
- *  The MSR[POW] bit is set to put the CPU into the low power mode
- *  defined in HID0.  HID0 is set during starup in start.S.
- *
- */
-void *bsp_idle_thread( uintptr_t ignored )
-{
-  for(;;) {
-    asm volatile(
-      "mfmsr 3; oris 3,3,4; sync; mtmsr 3; isync; ori 3,3,0; ori 3,3,0"
-     );
-  }
-  return 0;
-}

c/src/lib/libbsp/powerpc/gen83xx/ChangeLog

@@ -1,3 +1,9 @@
+2009-08-26	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* Makefile.am, startup/bspstart.c: Rename BSP specific idle thread to
+	bsp_idle_thread and split into its own file.
+	* startup/bspidle.c: New file.
+
 2009-07-16	Joel Sherrill <joel.sherrill@oarcorp.com>
 
 	* configure.ac: Rename BSP_BOOTCARD_OPTIONS to

c/src/lib/libbsp/powerpc/gen83xx/Makefile.am

@@ -52,6 +52,7 @@ libbsp_a_SOURCES += ../../shared/bsplibc.c \
 	../../shared/gnatinstallhandler.c \
 	../shared/src/tictac.c \
 	startup/cpuinit.c \
+	startup/bspidle.c \
 	startup/bspstart.c \
 	../../shared/bspclean.c \
 	startup/bspreset.c \

c/src/lib/libbsp/powerpc/gen83xx/startup/bspidle.c

@@ -0,0 +1,48 @@
+/**
+ * @file
+ *
+ * @ingroup mpc83xx
+ *
+ * @brief Source for BSP Idle Thread
+ */
+
+/*
+ * Copyright (c) 2008
+ * Embedded Brains GmbH
+ * Obere Lagerstr. 30
+ * D-82178 Puchheim
+ * Germany
+ * rtems@embedded-brains.de
+ *
+ * The license and distribution terms for this file may be found in the file
+ * LICENSE in this distribution or at http://www.rtems.com/license/LICENSE.
+ *
+ * $Id$
+ */
+
+#include <bsp.h>
+
+/**
+ * @brief Idle thread body.
+ *
+ * Replaces the one in c/src/exec/score/src/threadidlebody.c
+ * The MSR[POW] bit is set to put the CPU into the low power mode
+ * defined in HID0.  HID0 is set during starup in start.S.
+ */
+void *bsp_idle_thread( uintptr_t ignored )
+{
+
+  while (1) {
+    asm volatile (
+      "mfmsr 3;"
+      "oris 3, 3, 4;"
+      "sync;"
+      "mtmsr 3;"
+      "isync;"
+      "ori 3, 3, 0;"
+      "ori 3, 3, 0"
+    );
+  }
+
+  return NULL;
+}

c/src/lib/libbsp/powerpc/gen83xx/startup/bspstart.c

@@ -152,28 +152,3 @@ void bsp_start( void)
   printk("Exit from bspstart\n");
 #endif
 }
-
-/**
- * @brief Idle thread body.
- *
- * Replaces the one in c/src/exec/score/src/threadidlebody.c
- * The MSR[POW] bit is set to put the CPU into the low power mode
- * defined in HID0.  HID0 is set during starup in start.S.
- */
-void *_Thread_Idle_body( uintptr_t ignored )
-{
-
-  while (1) {
-    asm volatile (
-      "mfmsr 3;"
-      "oris 3, 3, 4;"
-      "sync;"
-      "mtmsr 3;"
-      "isync;"
-      "ori 3, 3, 0;"
-      "ori 3, 3, 0"
-    );
-  }
-
-  return NULL;
-}

c/src/lib/libbsp/powerpc/mpc55xxevb/ChangeLog

@@ -1,3 +1,9 @@
+2009-08-26	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* Makefile.am, startup/bspstart.c: Rename BSP specific idle thread to
+	bsp_idle_thread and split into its own file.
+	* startup/bspidle.c: New file.
+
 2009-07-20	Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* clock/clock-config.c, include/smsc9218i.h, network/smsc9218i.c: New

c/src/lib/libbsp/powerpc/mpc55xxevb/Makefile.am

@@ -45,7 +45,8 @@ include_bsp_HEADERS = include/mpc55xxevb.h \
 # startup
 libbsp_a_SOURCES += ../../shared/bsplibc.c ../../shared/bsppost.c \
     ../../shared/bootcard.c ../shared/src/tictac.c ../../shared/bspclean.c \
-    startup/bspstart.c startup/bspgetworkarea.c ../../shared/bsppretaskinghook.c
+    startup/bspidle.c startup/bspstart.c startup/bspgetworkarea.c \
+    ../../shared/bsppretaskinghook.c
 
 # clock
 libbsp_a_SOURCES += clock/clock-config.c

c/src/lib/libbsp/powerpc/mpc55xxevb/startup/bspidle.c

@@ -0,0 +1,41 @@
+/**
+ * @file
+ *
+ * @ingroup mpc55xx
+ *
+ * @brief BSP Idle Thread Code
+ */
+
+/*
+ * Copyright (c) 2008
+ * Embedded Brains GmbH
+ * Obere Lagerstr. 30
+ * D-82178 Puchheim
+ * Germany
+ * rtems@embedded-brains.de
+ *
+ * The license and distribution terms for this file may be found in the file
+ * LICENSE in this distribution or at http://www.rtems.com/license/LICENSE.
+ */
+
+#include <bsp.h>
+
+/**
+ * @brief Idle thread body.
+ */
+void *bsp_idle_thread( uintptr_t ignored )
+{
+
+  while (1) {
+    asm volatile(
+      "mfmsr 3;"
+      "oris 3,3,4;"
+      "sync;"
+      "mtmsr 3;"
+      "isync;"
+      "ori 3,3,0;"
+      "ori 3,3,0"
+    );
+  }
+  return 0;
+}

c/src/lib/libbsp/powerpc/mpc55xxevb/startup/bspstart.c

@@ -255,23 +255,3 @@ void bsp_start(void)
 	rtems_cache_enable_data();
 #endif
 }
-
-/**
- * @brief Idle thread body.
- */
-void *_Thread_Idle_body( uintptr_t ignored )
-{
-
-	while (1) {
-		asm volatile(
-			"mfmsr 3;"
-			"oris 3,3,4;"
-			"sync;"
-			"mtmsr 3;"
-			"isync;"
-			"ori 3,3,0;"
-			"ori 3,3,0"
-		);
-	}
-	return 0;
-}

c/src/lib/libbsp/powerpc/mpc8260ads/ChangeLog

@@ -1,3 +1,9 @@
+2009-08-26	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* Makefile.am, startup/bspstart.c: Rename BSP specific idle thread to
+	bsp_idle_thread and split into its own file.
+	* startup/bspidle.c: New file.
+
 2009-08-10	Joel Sherrill <joel.sherrill@oarcorp.com>
 
 	* network/network.c: Disable use of simple vectored interrupt install

c/src/lib/libbsp/powerpc/mpc8260ads/Makefile.am

@@ -43,8 +43,8 @@ include_bsp_HEADERS += vectors/vectors.h
 # startup
 libbsp_a_SOURCES += ../../shared/bspclean.c ../../shared/bsplibc.c \
     ../../shared/bsppredriverhook.c ../../shared/bsppost.c \
-    startup/bspstart.c ../../shared/bootcard.c ../../shared/sbrk.c \
+    startup/bspidle.c startup/bspstart.c ../../shared/bootcard.c \
-    ../../shared/gnatinstallhandler.c startup/cpuinit.c \
+    ../../shared/sbrk.c ../../shared/gnatinstallhandler.c startup/cpuinit.c \
     ../../shared/bspgetworkarea.c ../../shared/bsppretaskinghook.c
 
 # vectors

c/src/lib/libbsp/powerpc/mpc8260ads/startup/bspidle.c

@@ -0,0 +1,35 @@
+/*
+ *  The MPC860 specific stuff was written by Jay Monkman (jmonkman@frasca.com)
+ *
+ *  Modified for the MPC8260ADS board by Andy Dachs <a.dachs@sstl.co.uk>
+ *  Surrey Satellite Technology Limited, 2001
+ *
+ *  COPYRIGHT (c) 1989-2007.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  $Id$
+ */
+
+#include <bsp.h>
+
+/*
+ *  bsp_idle_thread
+ *
+ *  The MSR[POW] bit is set to put the CPU into the low power mode
+ *  defined in HID0.  HID0 is set during starup in start.S.
+ *
+ */
+void *bsp_idle_thread( uintptr_t ignored )
+{
+  for( ; ; ) {
+    asm volatile(
+      "mfmsr 3; oris 3,3,4; sync; mtmsr 3; isync; ori 3,3,0; ori 3,3,0"
+    );
+  }
+
+  return 0; /* to remove warning */
+}

c/src/lib/libbsp/powerpc/mpc8260ads/startup/bspstart.c

@@ -237,25 +237,3 @@ void bsp_start(void)
 #endif
 
 }
-
-/*
- *
- *  _Thread_Idle_body
- *
- *  Replaces the one in c/src/exec/score/src/threadidlebody.c
- *  The MSR[POW] bit is set to put the CPU into the low power mode
- *  defined in HID0.  HID0 is set during starup in start.S.
- *
- */
-void *_Thread_Idle_body( uintptr_t ignored )
-{
-
-  for( ; ; )
-  {
-    asm volatile(
-      "mfmsr 3; oris 3,3,4; sync; mtmsr 3; isync; ori 3,3,0; ori 3,3,0"
-    );
-  }
-
-  return 0; /* to remove warning */
-}

c/src/lib/libbsp/powerpc/tqm8xx/ChangeLog

@@ -1,3 +1,9 @@
+2009-08-26	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* Makefile.am, startup/bspstart.c: Rename BSP specific idle thread to
+	bsp_idle_thread and split into its own file.
+	* startup/bspidle.c: New file.
+
 2009-08-07	Joel Sherrill <joel.sherrill@oarcorp.com>
 
 	* console/console.c: Disable call to rtems_interrupt_catch until it is

c/src/lib/libbsp/powerpc/tqm8xx/Makefile.am

@@ -58,7 +58,7 @@ libbsp_a_SOURCES += timer/timer.c
 # startup
 libbsp_a_SOURCES += ../../shared/bspclean.c ../../shared/bsplibc.c \
     ../../shared/bsppost.c ../../shared/bsppredriverhook.c \
-    ../../shared/bsppretaskinghook.c startup/bspstart.c \
+    ../../shared/bsppretaskinghook.c startup/bspidle.c startup/bspstart.c \
     startup/bspgetworkarea.c ../../shared/bootcard.c startup/mmutlbtab.c \
     startup/cpuinit.c ../../shared/sbrk.c ../../shared/gnatinstallhandler.c
 

c/src/lib/libbsp/powerpc/tqm8xx/startup/bspidle.c

@@ -0,0 +1,51 @@
+/**
+ * @file
+ *
+ * @ingroup tqm8xx
+ *
+ * @brief Source for BSP Idle Thread
+ */
+
+/*
+ * Copyright (c) 2008
+ * Embedded Brains GmbH
+ * Obere Lagerstr. 30
+ * D-82178 Puchheim
+ * Germany
+ * rtems@embedded-brains.de
+ *
+ * The license and distribution terms for this file may be found in the file
+ * LICENSE in this distribution or at http://www.rtems.com/license/LICENSE.
+ *
+ * $Id$
+ */
+
+#include <rtems.h>
+#include <libcpu/powerpc-utility.h>
+
+#include <bsp.h>
+
+/**
+ * @brief BSP Idle thread body.
+ *
+ * Replaces the one in c/src/exec/score/src/threadidlebody.c
+ * The MSR[POW] bit is set to put the CPU into the low power mode
+ * defined in HID0.  HID0 is set during starup in start.S.
+ */
+void *bsp_idle_thread( uintptr_t ignored )
+{
+
+  while (1) {
+    asm volatile (
+		  "mfmsr 3;"
+		  "oris 3, 3, 4;"
+		  "sync;"
+		  "mtmsr 3;"
+		  "isync;"
+		  "ori 3, 3, 0;"
+		  "ori 3, 3, 0"
+		  );
+  }
+
+  return NULL;
+}

c/src/lib/libbsp/powerpc/tqm8xx/startup/bspstart.c

@@ -193,28 +193,3 @@ void bsp_start( void)
   printk("Exit from bspstart\n");
 #endif
 }
-
-/**
- * @brief Idle thread body.
- *
- * Replaces the one in c/src/exec/score/src/threadidlebody.c
- * The MSR[POW] bit is set to put the CPU into the low power mode
- * defined in HID0.  HID0 is set during starup in start.S.
- */
-void *_Thread_Idle_body( uintptr_t ignored )
-{
-
-  while (1) {
-    asm volatile (
-		  "mfmsr 3;"
-		  "oris 3, 3, 4;"
-		  "sync;"
-		  "mtmsr 3;"
-		  "isync;"
-		  "ori 3, 3, 0;"
-		  "ori 3, 3, 0"
-		  );
-  }
-
-  return NULL;
-}