2008-02-20 Joel Sherrill <joel.sherrill@oarcorp.com>

* Makefile.am, configure.ac, index.html.in: Add initial version of
	RTEMS Shell Manual. This is largely a starting point but has most of
	the required structure.
	* shell/.cvsignore, shell/Makefile.am, shell/file.t, shell/general.t,
	shell/memory.t, shell/network.t, shell/preface.texi, shell/rtems.t,
	shell/shell.texi: New files.

doc/shell/network.t

@@ -0,0 +1,210 @@
+@c
+@c  COPYRIGHT (c) 1988-2008.
+@c  On-Line Applications Research Corporation (OAR).
+@c  All rights reserved.
+@c
+@c  $
+@c
+
+@chapter Network Commands
+
+@section Introduction
+
+The RTEMS shell has the following network commands:
+
+@itemize @bullet
+
+
+@item @code{netstats} - obtain network statistics
+
+@item @code{ifconfig} - configure a network interface
+
+@item @code{route} - show or manipulate the IP routing table
+
+@end itemize
+
+@section Commands
+
+@c
+@c
+@c
+@page
+@subsection netstats - obtain network statistics
+
+@pgindex netstats
+
+@subheading SYNOPSYS:
+
+netstats [-Aimfpcutv]
+
+@subheading DESCRIPTION:
+
+This command XXX
+
+@subheading NOTES:
+
+NONE
+
+@subheading EXAMPLES:
+
+The following is an example of how to use netstats:
+
+@example
+EXAMPLE_TBD
+@end example
+
+@subheading CONFIGURATION:
+
+@findex CONFIGURE_SHELL_NO_COMMAND_NETSTATS
+@findex CONFIGURE_SHELL_COMMAND_NETSTATS
+
+In order to disable this command out if you are configuring all commands,
+define @code{CONFIGURE_SHELL_NO_COMMAND_NETSTATS}.
+
+In order to enable this command if you are building a custom command set
+define @code{CONFIGURE_SHELL_COMMAND_NETSTATS}.
+
+
+@subheading PROGRAMMING INFORMATION:
+
+@findex rtems_shell_rtems_main_netstats
+
+The @code{COMMAND} is implemented by a C language function
+which has the following prototype:
+
+@example
+int rtems_shell_rtems_main_netstats(
+  int    argc,
+  char **argv
+);
+@end example
+
+The configuration structure for the @code{COMMAND} has the
+following prototype:
+
+@example
+extern rtems_shell_cmd_t rtems_shell_NETSTATS_Command;
+@end example
+
+@c
+@c
+@c
+@page
+@subsection ifconfig - configure a network interface
+
+@pgindex ifconfig
+
+@subheading SYNOPSYS:
+
+ifconfig
+
+@subheading DESCRIPTION:
+
+This command XXX
+
+@subheading NOTES:
+
+NONE
+
+@subheading EXAMPLES:
+
+The following is an example of how to use ifconfig:
+
+@example
+EXAMPLE_TBD
+@end example
+
+@subheading CONFIGURATION:
+
+@findex CONFIGURE_SHELL_NO_COMMAND_IFCONFIG
+@findex CONFIGURE_SHELL_COMMAND_IFCONFIG
+
+In order to disable this command out if you are configuring all commands,
+define @code{CONFIGURE_SHELL_NO_COMMAND_IFCONFIG}.
+
+In order to enable this command if you are building a custom command set
+define @code{CONFIGURE_SHELL_COMMAND_IFCONFIG}.
+
+
+@subheading PROGRAMMING INFORMATION:
+
+@findex rtems_shell_rtems_main_ifconfig
+
+The @code{COMMAND} is implemented by a C language function
+which has the following prototype:
+
+@example
+int rtems_shell_rtems_main_ifconfig(
+  int    argc,
+  char **argv
+);
+@end example
+
+The configuration structure for the @code{COMMAND} has the
+following prototype:
+
+@example
+extern rtems_shell_cmd_t rtems_shell_IFCONFIG_Command;
+@end example
+
+@c
+@c
+@c
+@page
+@subsection route - show or manipulate the ip routing table
+
+@pgindex route
+
+@subheading SYNOPSYS:
+
+route [subcommand]
+
+@subheading DESCRIPTION:
+
+This command XXX
+
+@subheading NOTES:
+
+NONE
+
+@subheading EXAMPLES:
+
+The following is an example of how to use route:
+
+@example
+EXAMPLE_TBD
+@end example
+
+@subheading CONFIGURATION:
+
+@findex CONFIGURE_SHELL_NO_COMMAND_ROUTE
+@findex CONFIGURE_SHELL_COMMAND_ROUTE
+
+In order to disable this command out if you are configuring all commands,
+define @code{CONFIGURE_SHELL_NO_COMMAND_ROUTE}.
+
+In order to enable this command if you are building a custom command set
+define @code{CONFIGURE_SHELL_COMMAND_ROUTE}.
+
+
+@subheading PROGRAMMING INFORMATION:
+
+@findex rtems_shell_rtems_main_route
+
+The @code{COMMAND} is implemented by a C language function
+which has the following prototype:
+
+@example
+int rtems_shell_rtems_main_route(
+  int    argc,
+  char **argv
+);
+@end example
+
+The configuration structure for the @code{COMMAND} has the
+following prototype:
+
+@example
+extern rtems_shell_cmd_t rtems_shell_ROUTE_Command;
+@end example
+