bsps: Move benchmark timer to bsps

This patch is a part of the BSP source reorganization.

Update #3285.

bsps/epiphany/epiphany_sim/btimer/btimer.c

@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2015 University of York.
+ * Hesham ALMatary <hmka501@york.ac.uk>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <rtems.h>
+#include <bsp.h>
+#include <rtems/btimer.h>
+#include <rtems/score/epiphany-utility.h>
+
+extern char bsp_start_vector_table_begin[];
+
+bool benchmark_timer_find_average_overhead;
+
+static void benchmark_timer1_interrupt_handler(void)
+{
+  unsigned int val = 0xFFFFFFFF;
+  unsigned int event_type = 0x1;
+
+  /* Embed assembly code for setting timer1 */
+  __asm__ __volatile__ ("movts ctimer1, %[val] \t \n" :: [val] "r" (val));
+
+  __asm__ __volatile__ ("movfs r16, config; \t \n"
+                "mov   r17, %%low(0xfffff0ff);\t \n"
+                "movt  r17, %%high(0xffff0ff);\t \n"
+                "lsl   r18, %[event_type], 0x8; \t \n"
+                "and   r16, r16, r17; \t \n"
+                "orr   r16, r16, r18; \t \n"
+                "movts config, r16; \t \n"
+                :: [event_type] "r" (event_type));
+}
+
+/* Start eCore tiemr 1 usef for profiling and timing analysis */
+void benchmark_timer_initialize( void )
+{
+  /* Install interrupt handler for timer 1 */
+
+  proc_ptr *table =
+    (proc_ptr *) bsp_start_vector_table_begin;
+
+  table[TIMER1] = benchmark_timer1_interrupt_handler;
+
+  benchmark_timer1_interrupt_handler();
+}
+
+/*
+ *  The following controls the behavior of benchmark_timer_read().
+ *
+ *  AVG_OVEREHAD is the overhead for starting and stopping the timer.  It
+ *  is usually deducted from the number returned.
+ *
+ *  LEAST_VALID is the lowest number this routine should trust.  Numbers
+ *  below this are "noise" and zero is returned.
+ */
+
+#define AVG_OVERHEAD      0  /* It typically takes X.X microseconds */
+                             /* (Y countdowns) to start/stop the timer. */
+                             /* This value is in microseconds. */
+#define LEAST_VALID       1  /* Don't trust a clicks value lower than this */
+
+benchmark_timer_t benchmark_timer_read( void )
+{
+  uint32_t timer_val = 0;
+  uint32_t total;
+
+  __asm__ __volatile__ ("movfs %[timer_val], ctimer1 \t \n"
+    :[timer_val] "=r" (timer_val):);
+
+  total = (0xFFFFFFFF - timer_val);
+
+  if ( benchmark_timer_find_average_overhead == true )
+    return total;
+  else {
+    if ( total < LEAST_VALID )
+      return 0;            /* below timer resolution */
+  /*
+   *  Somehow convert total into microseconds
+   */
+      return (total - AVG_OVERHEAD);
+    }
+}
+
+void benchmark_timer_disable_subtracting_average_overhead(
+  bool find_flag
+)
+{
+  benchmark_timer_find_average_overhead = find_flag;
+}