bsps: Move console drivers to bsps

This patch is a part of the BSP source reorganization.

Update #3285.

bsps/lm32/shared/console/uart.c

@@ -0,0 +1,73 @@
+/*
+ *  Uart driver for Lattice Mico32 (lm32) UART
+ */
+
+/*
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.org/license/LICENSE.
+ *
+ *  Jukka Pietarinen <jukka.pietarinen@mrf.fi>, 2008,
+ *  Micro-Research Finland Oy
+ */
+
+#include "../include/system_conf.h"
+#include "uart.h"
+#include <bsp.h>
+#include <rtems/libio.h>
+
+static inline int uartread(unsigned int reg)
+{
+  return *((int*)(UART_BASE_ADDRESS + reg));
+}
+
+static inline void uartwrite(unsigned int reg, int value)
+{
+  *((int*)(UART_BASE_ADDRESS + reg)) = value;
+}
+
+void BSP_uart_init(int baud)
+{
+  /* Disable UART interrupts */
+  uartwrite(LM32_UART_IER, 0);
+
+  /* Line control 8 bit, 1 stop, no parity */
+  uartwrite(LM32_UART_LCR, LM32_UART_LCR_8BIT);
+
+  /* Modem control, DTR = 1, RTS = 1 */
+  uartwrite(LM32_UART_MCR, LM32_UART_MCR_DTR | LM32_UART_MCR_RTS);
+
+  /* Set baud rate */
+  uartwrite(LM32_UART_DIV, CPU_FREQUENCY/baud);
+}
+
+void BSP_uart_polled_write(char ch)
+{
+  /* Insert CR before LF */
+  if (ch == '\n')
+    BSP_uart_polled_write('\r');
+  /* Wait until THR is empty. */
+  while (!(uartread(LM32_UART_LSR) & LM32_UART_LSR_THRE));
+  uartwrite(LM32_UART_RBR, ch);
+}
+
+int BSP_uart_polled_read( void )
+{
+  /* Wait until there is a byte in RBR */
+  while (!(uartread(LM32_UART_LSR) & LM32_UART_LSR_DR));
+  return (int) uartread(LM32_UART_RBR);
+}
+
+char BSP_uart_is_character_ready(char *ch)
+{
+  if (uartread(LM32_UART_LSR) & LM32_UART_LSR_DR)
+    {
+      *ch = (char) uartread(LM32_UART_RBR);
+      return true;
+    }
+  *ch = '0';
+  return false;
+}