forked from Imagelibrary/rtems
2008-09-14 Joel Sherrill <joel.sherrill@oarcorp.com>
* Makefile.am, configure.ac, startup/bspstart.c: Create bsp_get_work_area() into its own file and use BSP Framework to perform more initialization. * startup/bspgetworkarea.c: New file.
This commit is contained in:
Joel Sherrill
@@ -1,3 +1,10 @@
|
||||
2008-09-14 Joel Sherrill <joel.sherrill@oarcorp.com>
|
||||
|
||||
* Makefile.am, configure.ac, startup/bspstart.c: Create
|
||||
bsp_get_work_area() into its own file and use BSP Framework to
|
||||
perform more initialization.
|
||||
* startup/bspgetworkarea.c: New file.
|
||||
|
||||
2008-09-06 Ralf Corsépius <ralf.corsepius@rtems.org>
|
||||
|
||||
* startup/bspstart.c: Convert to "bool".
|
||||
|
||||
@@ -30,7 +30,8 @@ dist_project_lib_DATA += startup/linkcmds
|
||||
|
||||
startup_SOURCES = startup/bspclean.c ../../shared/bsplibc.c \
|
||||
../../shared/bsppost.c startup/bspstart.c ../../shared/bootcard.c \
|
||||
../../shared/sbrk.c \
|
||||
../../shared/bsppredriverhook.c startup/bspgetworkarea.c \
|
||||
../../shared/bsppretaskinghook.c ../../shared/sbrk.c \
|
||||
../../shared/gnatinstallhandler.c
|
||||
|
||||
dlentry_SOURCES = dlentry/dlentry.S
|
||||
|
||||
@@ -31,6 +31,7 @@ RTEMS_BSPOPTS_HELP([PPC_VECTOR_FILE_BASE],
|
||||
[This defines the base address of the exception table.
|
||||
NOTE: Vectors are actually at 0xFFF00000 but file starts at offset.])
|
||||
|
||||
RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
|
||||
|
||||
# Explicitly list all Makefiles here
|
||||
AC_CONFIG_FILES([Makefile])
|
||||
|
||||
37
c/src/lib/libbsp/powerpc/haleakala/startup/bspgetworkarea.c
Normal file
37
c/src/lib/libbsp/powerpc/haleakala/startup/bspgetworkarea.c
Normal file
@@ -0,0 +1,37 @@
|
||||
/*
|
||||
* The license and distribution terms for this file may be
|
||||
* found in the file LICENSE in this distribution or at
|
||||
* http://www.rtems.com/license/LICENSE.
|
||||
*
|
||||
* $Id$
|
||||
*/
|
||||
|
||||
#include <bsp.h>
|
||||
#include <bsp/bootcard.h>
|
||||
#include <stdint.h>
|
||||
|
||||
extern void *_WorkspaceStart;
|
||||
extern void *_RAMEnd;
|
||||
|
||||
/*
|
||||
* This method returns the base address and size of the area which
|
||||
* is to be allocated between the RTEMS Workspace and the C Program
|
||||
* Heap.
|
||||
*/
|
||||
void bsp_get_work_area(
|
||||
void **work_area_start,
|
||||
size_t *work_area_size,
|
||||
void **heap_start,
|
||||
size_t *heap_size
|
||||
)
|
||||
{
|
||||
uintptr_t size;
|
||||
|
||||
size = (uintptr_t)&_RAMEnd - (uintptr_t)&_WorkspaceStart;
|
||||
|
||||
*work_area_start = (void *)&_WorkspaceStart;
|
||||
*work_area_size = size;
|
||||
*heap_start = BSP_BOOTCARD_HEAP_USES_WORK_AREA;
|
||||
*heap_size = BSP_BOOTCARD_HEAP_SIZE_DEFAULT;
|
||||
}
|
||||
|
||||
@@ -9,7 +9,7 @@
|
||||
*
|
||||
* OUTPUT: NONE
|
||||
*
|
||||
* Author: Thomas Doerfler <td@imd.m.isar.de>
|
||||
* Author: Thomas Doerfler <td@imd.m.isar.de>
|
||||
* IMD Ingenieurbuero fuer Microcomputertechnik
|
||||
*
|
||||
* COPYRIGHT (c) 1998 by IMD
|
||||
@@ -17,7 +17,7 @@
|
||||
* Changes from IMD are covered by the original distributions terms.
|
||||
* This file has been derived from the papyrus BSP:
|
||||
*
|
||||
* Author: Andrew Bray <andy@i-cubed.co.uk>
|
||||
* Author: Andrew Bray <andy@i-cubed.co.uk>
|
||||
*
|
||||
* COPYRIGHT (c) 1995 by i-cubed ltd.
|
||||
*
|
||||
@@ -63,8 +63,6 @@
|
||||
|
||||
#include <bsp.h>
|
||||
#include <bsp/uart.h>
|
||||
#include <rtems/libio.h>
|
||||
#include <rtems/libcsupport.h>
|
||||
#include <bsp/irq.h>
|
||||
#include <rtems/bspIo.h>
|
||||
#include <libcpu/cpuIdent.h>
|
||||
@@ -80,125 +78,72 @@
|
||||
*/
|
||||
|
||||
/* Expected by clock.c */
|
||||
uint32_t bsp_clicks_per_usec;
|
||||
bool bsp_timer_internal_clock; /* true, when timer runs with CPU clk */
|
||||
uint32_t bsp_timer_least_valid;
|
||||
uint32_t bsp_timer_average_overhead;
|
||||
|
||||
|
||||
/* Initialize whatever libc we are using
|
||||
* called from postdriver hook
|
||||
*/
|
||||
|
||||
void bsp_postdriver_hook(void);
|
||||
void bsp_libc_init( void *, uint32_t, int );
|
||||
|
||||
/*
|
||||
*
|
||||
* bsp_predriver_hook
|
||||
*
|
||||
* Before drivers are setup.
|
||||
*/
|
||||
|
||||
void bsp_predriver_hook(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
/*
|
||||
* Function: bsp_pretasking_hook
|
||||
* Created: 95/03/10
|
||||
*
|
||||
* Description:
|
||||
* BSP pretasking hook. Called just before drivers are initialized.
|
||||
* Used to setup libc and install any BSP extensions.
|
||||
*
|
||||
* NOTES:
|
||||
* Must not use libc (to do io) from here, since drivers are
|
||||
* not yet initialized.
|
||||
*
|
||||
*/
|
||||
|
||||
|
||||
extern uint8_t _RAMEnd; /* Defined in linkcmds */
|
||||
|
||||
void bsp_pretasking_hook(void)
|
||||
/* Initialise libc with the address and size of the heap, which runs
|
||||
from the end of the RTEMS workspace to the top of RAM */
|
||||
{
|
||||
uint32_t heap_start;
|
||||
|
||||
heap_start = ( (uint32_t)Configuration.work_space_start +
|
||||
rtems_configuration_get_work_space_size() );
|
||||
|
||||
bsp_libc_init((void *)heap_start, (uint32_t)(&_RAMEnd) - heap_start, 0);
|
||||
|
||||
#ifdef RTEMS_DEBUG
|
||||
rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
|
||||
#endif
|
||||
}
|
||||
uint32_t bsp_clicks_per_usec;
|
||||
bool bsp_timer_internal_clock; /* true, when timer runs with CPU clk */
|
||||
uint32_t bsp_timer_least_valid;
|
||||
uint32_t bsp_timer_average_overhead;
|
||||
|
||||
/*-------------------- Haleakala-specific UART setup -------------------------*/
|
||||
|
||||
static void
|
||||
EarlyUARTInit(int baudRate)
|
||||
{
|
||||
uint8_t* up = (uint8_t*)(BSP_UART_IOBASE_COM1);
|
||||
int divider = BSP_UART_BAUD_BASE / baudRate;
|
||||
up[LCR] = DLAB; /* Access DLM/DLL */
|
||||
up[DLL] = divider & 0x0FF;
|
||||
up[DLM] = divider >> 8;
|
||||
up[LCR] = CHR_8_BITS;
|
||||
up[MCR] = DTR | RTS;
|
||||
up[FCR] = FIFO_EN | XMIT_RESET | RCV_RESET;
|
||||
up[THR] = '+';
|
||||
uint8_t* up = (uint8_t*)(BSP_UART_IOBASE_COM1);
|
||||
int divider = BSP_UART_BAUD_BASE / baudRate;
|
||||
up[LCR] = DLAB; /* Access DLM/DLL */
|
||||
up[DLL] = divider & 0x0FF;
|
||||
up[DLM] = divider >> 8;
|
||||
up[LCR] = CHR_8_BITS;
|
||||
up[MCR] = DTR | RTS;
|
||||
up[FCR] = FIFO_EN | XMIT_RESET | RCV_RESET;
|
||||
up[THR] = '+';
|
||||
}
|
||||
|
||||
|
||||
static void
|
||||
InitUARTClock(void)
|
||||
{
|
||||
uint32_t reg;
|
||||
mfsdr(SDR0_UART0,reg);
|
||||
reg &= ~0x008000FF;
|
||||
reg |= 0x00800001; /* Ext clock, div 1 */
|
||||
mtsdr(SDR0_UART0,reg);
|
||||
uint32_t reg;
|
||||
mfsdr(SDR0_UART0,reg);
|
||||
reg &= ~0x008000FF;
|
||||
reg |= 0x00800001; /* Ext clock, div 1 */
|
||||
mtsdr(SDR0_UART0,reg);
|
||||
}
|
||||
|
||||
void GPIO_AlternateSelect(int bitnum, int source)
|
||||
/* PPC405EX: select a GPIO function for the specified pin */
|
||||
{
|
||||
int shift;
|
||||
unsigned long value, mask;
|
||||
GPIORegisters* gpioPtr = (GPIORegisters*)(GPIOAddress);
|
||||
int shift;
|
||||
unsigned long value, mask;
|
||||
GPIORegisters* gpioPtr = (GPIORegisters*)(GPIOAddress);
|
||||
|
||||
shift = (31 - bitnum) & 0xF;
|
||||
value = (source & 3) << (shift*2);
|
||||
mask = 3 << (shift*2);
|
||||
if (bitnum <= 15) {
|
||||
gpioPtr->OSRL = (gpioPtr->OSRL & ~mask) | value;
|
||||
gpioPtr->TSRL = (gpioPtr->TSRL & ~mask) | value;
|
||||
} else {
|
||||
gpioPtr->OSRH = (gpioPtr->OSRH & ~mask) | value;
|
||||
gpioPtr->TSRH = (gpioPtr->TSRH & ~mask) | value;
|
||||
}
|
||||
shift = (31 - bitnum) & 0xF;
|
||||
value = (source & 3) << (shift*2);
|
||||
mask = 3 << (shift*2);
|
||||
if (bitnum <= 15) {
|
||||
gpioPtr->OSRL = (gpioPtr->OSRL & ~mask) | value;
|
||||
gpioPtr->TSRL = (gpioPtr->TSRL & ~mask) | value;
|
||||
} else {
|
||||
gpioPtr->OSRH = (gpioPtr->OSRH & ~mask) | value;
|
||||
gpioPtr->TSRH = (gpioPtr->TSRH & ~mask) | value;
|
||||
}
|
||||
}
|
||||
|
||||
void Init_FPGA(void)
|
||||
{
|
||||
/* Have to write to the FPGA to enable the UART drivers */
|
||||
/* Have to enable CS2 as an output in GPIO to get the FPGA working */
|
||||
mtebc(EBC0_B2CR,0xF0018000); /* Set up CS2 at 0xF0000000 */
|
||||
mtebc(EBC0_B2AP,0x9400C800);
|
||||
GPIO_AlternateSelect(9,1); /* GPIO9 = PerCS2 */
|
||||
{
|
||||
unsigned long *fpgaPtr = (unsigned long*)(0xF0000000);
|
||||
unsigned long n;
|
||||
n = *(fpgaPtr);
|
||||
n &= ~0x00100; /* User LEDs on */
|
||||
n |= 0x30000; /* UART 0 and 1 transcievers on! */
|
||||
*fpgaPtr = n;
|
||||
}
|
||||
/* Have to write to the FPGA to enable the UART drivers */
|
||||
/* Have to enable CS2 as an output in GPIO to get the FPGA working */
|
||||
mtebc(EBC0_B2CR,0xF0018000); /* Set up CS2 at 0xF0000000 */
|
||||
mtebc(EBC0_B2AP,0x9400C800);
|
||||
GPIO_AlternateSelect(9,1); /* GPIO9 = PerCS2 */
|
||||
{
|
||||
unsigned long *fpgaPtr = (unsigned long*)(0xF0000000);
|
||||
unsigned long n;
|
||||
n = *(fpgaPtr);
|
||||
n &= ~0x00100; /* User LEDs on */
|
||||
n |= 0x30000; /* UART 0 and 1 transcievers on! */
|
||||
*fpgaPtr = n;
|
||||
}
|
||||
}
|
||||
|
||||
/*===================================================================*/
|
||||
@@ -206,17 +151,16 @@ void Init_FPGA(void)
|
||||
static void
|
||||
DirectUARTWrite(const char c)
|
||||
{
|
||||
uint8_t* up = (uint8_t*)(BSP_UART_IOBASE_COM1);
|
||||
while ((up[LSR] & THRE) == 0) { ; }
|
||||
up[THR] = c;
|
||||
if (c=='\n')
|
||||
DirectUARTWrite('\r');
|
||||
uint8_t* up = (uint8_t*)(BSP_UART_IOBASE_COM1);
|
||||
while ((up[LSR] & THRE) == 0) { ; }
|
||||
up[THR] = c;
|
||||
if (c=='\n')
|
||||
DirectUARTWrite('\r');
|
||||
}
|
||||
|
||||
/* We will provide our own printk output function as it may get used early */
|
||||
BSP_output_char_function_type BSP_output_char = DirectUARTWrite;
|
||||
|
||||
|
||||
/*===================================================================*/
|
||||
|
||||
|
||||
@@ -225,66 +169,51 @@ BSP_output_char_function_type BSP_output_char = DirectUARTWrite;
|
||||
*
|
||||
* This routine does the bulk of the system initialization.
|
||||
*/
|
||||
|
||||
|
||||
void bsp_start( void )
|
||||
{
|
||||
LINKER_SYMBOL(intrStack_start);
|
||||
LINKER_SYMBOL(intrStack_size);
|
||||
ppc_cpu_id_t myCpu;
|
||||
ppc_cpu_revision_t myCpuRevision;
|
||||
LINKER_SYMBOL(intrStack_start);
|
||||
LINKER_SYMBOL(intrStack_size);
|
||||
ppc_cpu_id_t myCpu;
|
||||
ppc_cpu_revision_t myCpuRevision;
|
||||
|
||||
/* Get the UART clock initialized first in case we call printk */
|
||||
/* Get the UART clock initialized first in case we call printk */
|
||||
|
||||
InitUARTClock();
|
||||
Init_FPGA();
|
||||
EarlyUARTInit(115200);
|
||||
InitUARTClock();
|
||||
Init_FPGA();
|
||||
EarlyUARTInit(115200);
|
||||
|
||||
/*
|
||||
* Get CPU identification dynamically. Note that the get_ppc_cpu_type()
|
||||
* function store the result in global variables
|
||||
* so that it can be used later...
|
||||
*/
|
||||
myCpu = get_ppc_cpu_type();
|
||||
myCpuRevision = get_ppc_cpu_revision();
|
||||
/*
|
||||
* Get CPU identification dynamically. Note that the get_ppc_cpu_type()
|
||||
* function store the result in global variables
|
||||
* so that it can be used later...
|
||||
*/
|
||||
myCpu = get_ppc_cpu_type();
|
||||
myCpuRevision = get_ppc_cpu_revision();
|
||||
|
||||
/*
|
||||
* initialize the device driver parameters
|
||||
*/
|
||||
/*
|
||||
* initialize the device driver parameters
|
||||
*/
|
||||
|
||||
/* Set globals visible to clock.c */
|
||||
bsp_clicks_per_usec = 400; /* timebase register ticks/microsecond = CPU Clk in MHz */
|
||||
bsp_timer_internal_clock = TRUE;
|
||||
bsp_timer_average_overhead = 2;
|
||||
bsp_timer_least_valid = 3;
|
||||
/* Set globals visible to clock.c */
|
||||
/* timebase register ticks/microsecond = CPU Clk in MHz */
|
||||
bsp_clicks_per_usec = 400;
|
||||
|
||||
/*
|
||||
* Initialize default raw exception handlers.
|
||||
*/
|
||||
ppc_exc_initialize(
|
||||
PPC_INTERRUPT_DISABLE_MASK_DEFAULT,
|
||||
(uint32_t) intrStack_start,
|
||||
(uint32_t) intrStack_size);
|
||||
bsp_timer_internal_clock = TRUE;
|
||||
bsp_timer_average_overhead = 2;
|
||||
bsp_timer_least_valid = 3;
|
||||
|
||||
/*
|
||||
* Install our own set of exception vectors
|
||||
*/
|
||||
BSP_rtems_irq_mng_init(0);
|
||||
|
||||
/*
|
||||
* Allocate the memory for the RTEMS Work Space. This can come from
|
||||
* a variety of places: hard coded address, malloc'ed from outside
|
||||
* RTEMS world (e.g. simulator or primitive memory manager), or (as
|
||||
* typically done by stock BSPs) by subtracting the required amount
|
||||
* of work space from the last physical address on the CPU board.
|
||||
*/
|
||||
/* In this case we allocate space at an address defined in linkcmds
|
||||
which points to a block above the stack and below the heap */
|
||||
{
|
||||
extern uint8_t _WorkspaceStart;
|
||||
Configuration.work_space_start = &_WorkspaceStart;
|
||||
}
|
||||
/*
|
||||
* Initialize default raw exception handlers.
|
||||
*/
|
||||
ppc_exc_initialize(
|
||||
PPC_INTERRUPT_DISABLE_MASK_DEFAULT,
|
||||
(uint32_t) intrStack_start,
|
||||
(uint32_t) intrStack_size);
|
||||
|
||||
/*
|
||||
* Install our own set of exception vectors
|
||||
*/
|
||||
BSP_rtems_irq_mng_init(0);
|
||||
}
|
||||
|
||||
void BSP_ask_for_reset(void)
|
||||
@@ -304,5 +233,3 @@ void _BSP_Fatal_error(unsigned int v)
|
||||
printk("%s PANIC ERROR %x\n",_RTEMS_version, v);
|
||||
BSP_ask_for_reset();
|
||||
}
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user