forked from Imagelibrary/rtems
mvme3100/startup/bspstart.c: Remove myCpu variables and clean up
This commit is contained in:
Joel Sherrill
@@ -47,14 +47,14 @@
|
||||
#endif
|
||||
|
||||
extern unsigned long __rtems_end[];
|
||||
extern void BSP_vme_config(void);
|
||||
extern void BSP_vme_config(void);
|
||||
extern void BSP_pciConfigDump_early( void );
|
||||
extern unsigned ppc_exc_lock_std, ppc_exc_gpr3_std;
|
||||
|
||||
/*
|
||||
* Copy Additional boot param passed by boot loader
|
||||
*/
|
||||
#define CMDLINE_BUF_SIZE 2048
|
||||
#define CMDLINE_BUF_SIZE 2048
|
||||
|
||||
static char cmdline_buf[CMDLINE_BUF_SIZE] = {0};
|
||||
char *BSP_commandline_string = cmdline_buf;
|
||||
@@ -97,13 +97,12 @@ static void
|
||||
prether(char *b, int idx)
|
||||
{
|
||||
int i;
|
||||
printk("Ethernet %i %02X", idx, *b++);
|
||||
for ( i=0; i<5; i++ )
|
||||
printk(":%02X",*b++);
|
||||
printk("\n");
|
||||
printk("Ethernet %i %02X", idx, *b++);
|
||||
for ( i=0; i<5; i++ )
|
||||
printk(":%02X",*b++);
|
||||
printk("\n");
|
||||
}
|
||||
|
||||
|
||||
BSP_output_char_function_type BSP_output_char = BSP_output_char_via_serial;
|
||||
BSP_polling_getchar_function_type BSP_poll_char = NULL;
|
||||
|
||||
@@ -124,8 +123,11 @@ char *rtems_progname;
|
||||
/*
|
||||
* Use the shared implementations of the following routines
|
||||
*/
|
||||
|
||||
char * save_boot_params(void* r3, void *r4, void* r5, char *additional_boot_options)
|
||||
char * save_boot_params(
|
||||
void* r3,
|
||||
void *r4,
|
||||
void* r5,
|
||||
char *additional_boot_options)
|
||||
{
|
||||
|
||||
strncpy(cmdline_buf, additional_boot_options, CMDLINE_BUF_SIZE);
|
||||
@@ -134,76 +136,76 @@ char * save_boot_params(void* r3, void *r4, void* r5, char *additional_boot_opti
|
||||
}
|
||||
|
||||
#define CS_CONFIG_CS_EN (1<<31)
|
||||
#define CS_BNDS_SA(x) ((((uint32_t)(x))>>(31-15)) & 0xff)
|
||||
#define CS_BNDS_EA(x) ((((uint32_t)(x))>>(31-31)) & 0xff)
|
||||
#define CS_BNDS_SA(x) ((((uint32_t)(x))>>(31-15)) & 0xff)
|
||||
#define CS_BNDS_EA(x) ((((uint32_t)(x))>>(31-31)) & 0xff)
|
||||
|
||||
static inline uint32_t
|
||||
_ccsr_rd32(uint32_t off)
|
||||
{
|
||||
return in_be32( (volatile unsigned *)(BSP_8540_CCSR_BASE + off) );
|
||||
return in_be32( (volatile unsigned *)(BSP_8540_CCSR_BASE + off) );
|
||||
}
|
||||
|
||||
static inline void
|
||||
_ccsr_wr32(uint32_t off, uint32_t val)
|
||||
{
|
||||
out_be32( (volatile unsigned *)(BSP_8540_CCSR_BASE + off), val );
|
||||
out_be32( (volatile unsigned *)(BSP_8540_CCSR_BASE + off), val );
|
||||
}
|
||||
|
||||
|
||||
STATIC uint32_t
|
||||
BSP_get_mem_size( void )
|
||||
{
|
||||
int i;
|
||||
uint32_t cs_bnds, cs_config;
|
||||
uint32_t memsz=0;
|
||||
uint32_t v;
|
||||
int i;
|
||||
uint32_t cs_bnds, cs_config;
|
||||
uint32_t memsz=0;
|
||||
uint32_t v;
|
||||
|
||||
for ( cs_bnds = 0x2000, cs_config=0x2080, i=0; i<4; i++, cs_bnds+=8, cs_config+=4 ) {
|
||||
if ( CS_CONFIG_CS_EN & _ccsr_rd32( cs_config ) ) {
|
||||
v = _ccsr_rd32( cs_bnds );
|
||||
for ( cs_bnds = 0x2000, cs_config=0x2080, i=0; i<4; i++, cs_bnds+=8, cs_config+=4 ) {
|
||||
if ( CS_CONFIG_CS_EN & _ccsr_rd32( cs_config ) ) {
|
||||
v = _ccsr_rd32( cs_bnds );
|
||||
|
||||
memsz += CS_BNDS_EA(v) - CS_BNDS_SA(v) + 1;
|
||||
}
|
||||
}
|
||||
return memsz << 24;
|
||||
memsz += CS_BNDS_EA(v) - CS_BNDS_SA(v) + 1;
|
||||
}
|
||||
}
|
||||
return memsz << 24;
|
||||
}
|
||||
|
||||
STATIC void
|
||||
BSP_calc_freqs( void )
|
||||
{
|
||||
uint32_t porpllsr = _ccsr_rd32( 0xe0000 );
|
||||
unsigned plat_ratio = (porpllsr >> (31-30)) & 0x1f;
|
||||
unsigned e500_ratio = (porpllsr >> (31-15)) & 0x3f;
|
||||
uint32_t porpllsr = _ccsr_rd32( 0xe0000 );
|
||||
unsigned plat_ratio = (porpllsr >> (31-30)) & 0x1f;
|
||||
unsigned e500_ratio = (porpllsr >> (31-15)) & 0x3f;
|
||||
|
||||
switch ( plat_ratio ) {
|
||||
case 2: case 3: case 4: case 5: case 6:
|
||||
case 8: case 9: case 10: case 12: case 16:
|
||||
/* supported ratios */
|
||||
BSP_bus_frequency = BSP_pci_bus_frequency * plat_ratio;
|
||||
break;
|
||||
switch ( plat_ratio ) {
|
||||
case 2: case 3: case 4: case 5: case 6:
|
||||
case 8: case 9: case 10: case 12: case 16:
|
||||
/* supported ratios */
|
||||
BSP_bus_frequency = BSP_pci_bus_frequency * plat_ratio;
|
||||
break;
|
||||
|
||||
default:
|
||||
BSP_panic("Unknown PLL sys-clock ratio; something's wrong here");
|
||||
}
|
||||
default:
|
||||
BSP_panic("Unknown PLL sys-clock ratio; something's wrong here");
|
||||
}
|
||||
|
||||
switch ( e500_ratio ) {
|
||||
case 4: case 5: case 6: case 7:
|
||||
BSP_processor_frequency = (BSP_pci_bus_frequency * e500_ratio) >> 1;
|
||||
break;
|
||||
switch ( e500_ratio ) {
|
||||
case 4: case 5: case 6: case 7:
|
||||
BSP_processor_frequency = (BSP_pci_bus_frequency * e500_ratio) >> 1;
|
||||
break;
|
||||
|
||||
default:
|
||||
BSP_panic("Unknown PLL e500-clock ratio; something's wrong here");
|
||||
}
|
||||
default:
|
||||
BSP_panic("Unknown PLL e500-clock ratio; something's wrong here");
|
||||
}
|
||||
|
||||
printk("Core Complex Bus (CCB) Clock Freq: %10u Hz\n", BSP_bus_frequency);
|
||||
printk("CPU Clock Freq: %10u Hz\n", BSP_processor_frequency);
|
||||
printk("Core Complex Bus (CCB) Clock Freq: %10u Hz\n", BSP_bus_frequency);
|
||||
printk("CPU Clock Freq: %10u Hz\n", BSP_processor_frequency);
|
||||
}
|
||||
|
||||
void
|
||||
bsp_predriver_hook(void)
|
||||
{
|
||||
/* Some drivers (RTC) may need i2c */
|
||||
BSP_i2c_initialize();
|
||||
/* Some drivers (RTC) may need i2c */
|
||||
BSP_i2c_initialize();
|
||||
}
|
||||
|
||||
/*
|
||||
@@ -218,221 +220,220 @@ SPR_RW(HID1)
|
||||
|
||||
void bsp_start( void )
|
||||
{
|
||||
unsigned char *stack;
|
||||
uintptr_t intrStackStart;
|
||||
uintptr_t intrStackSize;
|
||||
char *chpt;
|
||||
ppc_cpu_id_t myCpu;
|
||||
ppc_cpu_revision_t myCpuRevision;
|
||||
int i;
|
||||
E500_tlb_va_cache_t *tlb;
|
||||
unsigned char *stack;
|
||||
uintptr_t intrStackStart;
|
||||
uintptr_t intrStackSize;
|
||||
char *chpt;
|
||||
int i;
|
||||
ppc_cpu_id_t myCpu;
|
||||
ppc_cpu_revision_t myCpuRevision;
|
||||
E500_tlb_va_cache_t *tlb;
|
||||
|
||||
VpdBufRec vpdData [] = {
|
||||
{ key: ProductIdent, instance: 0, buf: BSP_productIdent, buflen: sizeof(BSP_productIdent) - 1 },
|
||||
{ key: SerialNumber, instance: 0, buf: BSP_serialNumber, buflen: sizeof(BSP_serialNumber) - 1 },
|
||||
{ key: BusClockHz, instance: 0, buf: &BSP_pci_bus_frequency, buflen: sizeof(BSP_pci_bus_frequency) },
|
||||
{ key: EthernetAddr, instance: 0, buf: BSP_enetAddr0, buflen: sizeof(BSP_enetAddr0) },
|
||||
{ key: EthernetAddr, instance: 1, buf: BSP_enetAddr1, buflen: sizeof(BSP_enetAddr1) },
|
||||
{ key: EthernetAddr, instance: 2, buf: BSP_enetAddr2, buflen: sizeof(BSP_enetAddr2) },
|
||||
VPD_END
|
||||
{ key: ProductIdent, instance: 0, buf: BSP_productIdent, buflen: sizeof(BSP_productIdent) - 1 },
|
||||
{ key: SerialNumber, instance: 0, buf: BSP_serialNumber, buflen: sizeof(BSP_serialNumber) - 1 },
|
||||
{ key: BusClockHz, instance: 0, buf: &BSP_pci_bus_frequency, buflen: sizeof(BSP_pci_bus_frequency) },
|
||||
{ key: EthernetAddr, instance: 0, buf: BSP_enetAddr0, buflen: sizeof(BSP_enetAddr0) },
|
||||
{ key: EthernetAddr, instance: 1, buf: BSP_enetAddr1, buflen: sizeof(BSP_enetAddr1) },
|
||||
{ key: EthernetAddr, instance: 2, buf: BSP_enetAddr2, buflen: sizeof(BSP_enetAddr2) },
|
||||
VPD_END
|
||||
};
|
||||
|
||||
/* Intersperse messages with actions to help locate problems */
|
||||
printk("-----------------------------------------\n");
|
||||
/* Intersperse messages with actions to help locate problems */
|
||||
printk("-----------------------------------------\n");
|
||||
|
||||
/*
|
||||
* Get CPU identification dynamically. Note that the get_ppc_cpu_type()
|
||||
* function store the result in global variables so that it can be used
|
||||
* later...
|
||||
*/
|
||||
myCpu = get_ppc_cpu_type();
|
||||
myCpuRevision = get_ppc_cpu_revision();
|
||||
/*
|
||||
* Get CPU identification dynamically. Note that the get_ppc_cpu_type()
|
||||
* function store the result in global variables so that it can be used
|
||||
* later...
|
||||
*/
|
||||
myCpu = get_ppc_cpu_type();
|
||||
myCpuRevision = get_ppc_cpu_revision();
|
||||
|
||||
printk("Welcome to %s\n", _RTEMS_version);
|
||||
printk("BSP: %s, CVS Release ($Name$)\n", "mvme3100");
|
||||
printk("Welcome to %s\n", _RTEMS_version);
|
||||
printk("BSP: %s, CVS Release ($Name$)\n", "mvme3100");
|
||||
|
||||
/*
|
||||
* the initial stack has aready been set to this value in start.S
|
||||
* so there is no need to set it in r1 again... It is just for info
|
||||
* so that It can be printed without accessing R1.
|
||||
*/
|
||||
asm volatile("mr %0, 1":"=r"(stack));
|
||||
/*
|
||||
* the initial stack has aready been set to this value in start.S
|
||||
* so there is no need to set it in r1 again... It is just for info
|
||||
* so that It can be printed without accessing R1.
|
||||
*/
|
||||
asm volatile("mr %0, 1":"=r"(stack));
|
||||
|
||||
/* tag the bottom */
|
||||
*((uint32_t*)stack) = 0;
|
||||
/* tag the bottom */
|
||||
*((uint32_t*)stack) = 0;
|
||||
|
||||
/*
|
||||
* Initialize the interrupt related settings.
|
||||
*/
|
||||
intrStackStart = (uintptr_t) __rtems_end;
|
||||
intrStackSize = rtems_configuration_get_interrupt_stack_size();
|
||||
/*
|
||||
* Initialize the interrupt related settings.
|
||||
*/
|
||||
intrStackStart = (uintptr_t) __rtems_end;
|
||||
intrStackSize = rtems_configuration_get_interrupt_stack_size();
|
||||
|
||||
/*
|
||||
* Initialize default raw exception handlers.
|
||||
*/
|
||||
ppc_exc_initialize(intrStackStart, intrStackSize);
|
||||
/*
|
||||
* Initialize default raw exception handlers.
|
||||
*/
|
||||
ppc_exc_initialize(intrStackStart, intrStackSize);
|
||||
|
||||
printk("CPU 0x%x - rev 0x%x\n", myCpu, myCpuRevision);
|
||||
printk("CPU 0x%x - rev 0x%x\n", myCpu, myCpuRevision);
|
||||
|
||||
#ifdef SHOW_MORE_INIT_SETTINGS
|
||||
printk("Additionnal boot options are %s\n", BSP_commandline_string);
|
||||
printk("Initial system stack at %x\n", stack);
|
||||
printk("Software IRQ stack starts at %x with size %u\n", intrStackStart, intrStackSize);
|
||||
printk("Additionnal boot options are %s\n", BSP_commandline_string);
|
||||
printk("Initial system stack at %x\n", stack);
|
||||
printk("Software IRQ stack starts at %x with size %u\n", intrStackStart, intrStackSize);
|
||||
#endif
|
||||
|
||||
#ifdef SHOW_MORE_INIT_SETTINGS
|
||||
printk("Going to start PCI buses scanning and initialization\n");
|
||||
printk("Going to start PCI buses scanning and initialization\n");
|
||||
#endif
|
||||
|
||||
BSP_mem_size = BSP_get_mem_size();
|
||||
BSP_mem_size = BSP_get_mem_size();
|
||||
|
||||
{
|
||||
/* memory-select errors were disabled in 'start.S';
|
||||
* motload has all TLBs mapping a possible larger area as
|
||||
* memory (not-guarded, caching-enabled) than actual physical
|
||||
* memory is available.
|
||||
* In case of speculative loads this may cause 'memory-select' errors
|
||||
* which seem to raise 'core_fault_in' (found no description in
|
||||
* the manual but I experienced this problem).
|
||||
* Such errors (if HID1[RFXE] is clear) may *stall* execution
|
||||
* leading to mysterious 'hangs'.
|
||||
*
|
||||
* Here we remove all mappings, re-enable memory-select
|
||||
* errors and make sure we enable HID1[RFXE] to avoid
|
||||
* stalls (since we don't implement handling individual
|
||||
* error-handling interrupts).
|
||||
*/
|
||||
{
|
||||
/* memory-select errors were disabled in 'start.S';
|
||||
* motload has all TLBs mapping a possible larger area as
|
||||
* memory (not-guarded, caching-enabled) than actual physical
|
||||
* memory is available.
|
||||
* In case of speculative loads this may cause 'memory-select' errors
|
||||
* which seem to raise 'core_fault_in' (found no description in
|
||||
* the manual but I experienced this problem).
|
||||
* Such errors (if HID1[RFXE] is clear) may *stall* execution
|
||||
* leading to mysterious 'hangs'.
|
||||
*
|
||||
* Here we remove all mappings, re-enable memory-select
|
||||
* errors and make sure we enable HID1[RFXE] to avoid
|
||||
* stalls (since we don't implement handling individual
|
||||
* error-handling interrupts).
|
||||
*/
|
||||
|
||||
/* enable machine check for bad bus errors */
|
||||
_write_HID1( _read_HID1() | 0x20000 );
|
||||
/* enable machine check for bad bus errors */
|
||||
_write_HID1( _read_HID1() | 0x20000 );
|
||||
|
||||
rtems_e500_initlb();
|
||||
rtems_e500_initlb();
|
||||
|
||||
for ( i=0, tlb=rtems_e500_tlb_va_cache; i<NumberOf(rtems_e500_tlb_va_cache); i++, tlb++ ) {
|
||||
/* disable TLBs for caching-enabled, non-guarded areas
|
||||
* beyond physical memory
|
||||
*/
|
||||
if ( tlb->att.v
|
||||
&& 0xa != (tlb->att.wimge & 0xa)
|
||||
&& (tlb->va.va_epn<<12) >= BSP_mem_size ) {
|
||||
rtems_e500_clrtlb( E500_SELTLB_1 | i );
|
||||
}
|
||||
}
|
||||
for ( i=0, tlb=rtems_e500_tlb_va_cache; i<NumberOf(rtems_e500_tlb_va_cache); i++, tlb++ ) {
|
||||
/* disable TLBs for caching-enabled, non-guarded areas
|
||||
* beyond physical memory
|
||||
*/
|
||||
if ( tlb->att.v
|
||||
&& 0xa != (tlb->att.wimge & 0xa)
|
||||
&& (tlb->va.va_epn<<12) >= BSP_mem_size ) {
|
||||
rtems_e500_clrtlb( E500_SELTLB_1 | i );
|
||||
}
|
||||
}
|
||||
|
||||
/* clear all pending memory errors */
|
||||
_ccsr_wr32(0x2e40, 0xffffffff);
|
||||
/* enable checking for memory-select errors */
|
||||
_ccsr_wr32(0x2e44, _ccsr_rd32(0x2e44) & ~1 );
|
||||
}
|
||||
/* clear all pending memory errors */
|
||||
_ccsr_wr32(0x2e40, 0xffffffff);
|
||||
/* enable checking for memory-select errors */
|
||||
_ccsr_wr32(0x2e44, _ccsr_rd32(0x2e44) & ~1 );
|
||||
}
|
||||
|
||||
BSP_vpdRetrieveFields( vpdData );
|
||||
BSP_vpdRetrieveFields( vpdData );
|
||||
|
||||
printk("Board Type: %s (S/N %s)\n",
|
||||
BSP_productIdent[0] ? BSP_productIdent : "n/a",
|
||||
BSP_serialNumber[0] ? BSP_serialNumber : "n/a");
|
||||
printk("Board Type: %s (S/N %s)\n",
|
||||
BSP_productIdent[0] ? BSP_productIdent : "n/a",
|
||||
BSP_serialNumber[0] ? BSP_serialNumber : "n/a");
|
||||
|
||||
printk("External (=PCI Bus) Clock Freq ");
|
||||
if ( 0xdeadbeef == BSP_pci_bus_frequency ) {
|
||||
BSP_pci_bus_frequency = 66666666;
|
||||
printk(" NOT FOUND in VPD; using %10u Hz\n",
|
||||
BSP_pci_bus_frequency);
|
||||
} else {
|
||||
printk(": %10u Hz\n",
|
||||
BSP_pci_bus_frequency);
|
||||
}
|
||||
printk("External (=PCI Bus) Clock Freq ");
|
||||
if ( 0xdeadbeef == BSP_pci_bus_frequency ) {
|
||||
BSP_pci_bus_frequency = 66666666;
|
||||
printk(" NOT FOUND in VPD; using %10u Hz\n",
|
||||
BSP_pci_bus_frequency);
|
||||
} else {
|
||||
printk(": %10u Hz\n",
|
||||
BSP_pci_bus_frequency);
|
||||
}
|
||||
|
||||
/* Calculate CPU and CCB bus freqs */
|
||||
BSP_calc_freqs();
|
||||
/* Calculate CPU and CCB bus freqs */
|
||||
BSP_calc_freqs();
|
||||
|
||||
pci_initialize();
|
||||
pci_initialize();
|
||||
|
||||
prether(BSP_enetAddr0, 0);
|
||||
prether(BSP_enetAddr1, 1);
|
||||
prether(BSP_enetAddr2, 2);
|
||||
prether(BSP_enetAddr0, 0);
|
||||
prether(BSP_enetAddr1, 1);
|
||||
prether(BSP_enetAddr2, 2);
|
||||
|
||||
/* need to tweak the motload setup */
|
||||
BSP_motload_pci_fixup();
|
||||
/* need to tweak the motload setup */
|
||||
BSP_motload_pci_fixup();
|
||||
|
||||
#ifdef SHOW_MORE_INIT_SETTINGS
|
||||
printk("Number of PCI buses found is : %d\n", pci_bus_count());
|
||||
{
|
||||
BSP_pciConfigDump_early();
|
||||
}
|
||||
printk("Number of PCI buses found is : %d\n", pci_bus_count());
|
||||
{
|
||||
BSP_pciConfigDump_early();
|
||||
}
|
||||
#endif
|
||||
|
||||
if ( (chpt = strstr(BSP_commandline_string,"MEMSZ=")) ) {
|
||||
char *endp;
|
||||
uint32_t sz;
|
||||
chpt+=6 /* strlen("MEMSZ=") */;
|
||||
sz = strtoul(chpt, &endp, 0);
|
||||
if ( endp != chpt )
|
||||
BSP_mem_size = sz;
|
||||
}
|
||||
if ( (chpt = strstr(BSP_commandline_string,"MEMSZ=")) ) {
|
||||
char *endp;
|
||||
uint32_t sz;
|
||||
chpt+=6 /* strlen("MEMSZ=") */;
|
||||
sz = strtoul(chpt, &endp, 0);
|
||||
if ( endp != chpt )
|
||||
BSP_mem_size = sz;
|
||||
}
|
||||
|
||||
printk("Memory: %10u bytes\n", BSP_mem_size);
|
||||
printk("Memory: %10u bytes\n", BSP_mem_size);
|
||||
|
||||
BSP_bus_frequency = 333333333;
|
||||
BSP_processor_frequency = 833333333;
|
||||
BSP_time_base_divisor = 8000; /* if external RTC clock unused (HID0) */
|
||||
BSP_bus_frequency = 333333333;
|
||||
BSP_processor_frequency = 833333333;
|
||||
BSP_time_base_divisor = 8000; /* if external RTC clock unused (HID0) */
|
||||
|
||||
/* clear hostbridge errors but leave MCP disabled -
|
||||
* PCI config space scanning code will trip otherwise :-(
|
||||
*/
|
||||
_BSP_clear_hostbridge_errors(0 /* enableMCP */, 0/*quiet*/);
|
||||
/* clear hostbridge errors but leave MCP disabled -
|
||||
* PCI config space scanning code will trip otherwise :-(
|
||||
*/
|
||||
_BSP_clear_hostbridge_errors(0 /* enableMCP */, 0/*quiet*/);
|
||||
|
||||
bsp_clicks_per_usec = BSP_bus_frequency/(BSP_time_base_divisor * 1000);
|
||||
rtems_counter_initialize_converter(
|
||||
BSP_bus_frequency / (BSP_time_base_divisor / 1000)
|
||||
);
|
||||
bsp_clicks_per_usec = BSP_bus_frequency/(BSP_time_base_divisor * 1000);
|
||||
rtems_counter_initialize_converter(
|
||||
BSP_bus_frequency / (BSP_time_base_divisor / 1000)
|
||||
);
|
||||
|
||||
/*
|
||||
* Initalize RTEMS IRQ system
|
||||
*/
|
||||
BSP_rtems_irq_mng_init(0);
|
||||
/*
|
||||
* Initalize RTEMS IRQ system
|
||||
*/
|
||||
BSP_rtems_irq_mng_init(0);
|
||||
|
||||
if (1) {
|
||||
int i;
|
||||
unsigned msr,tcr;
|
||||
asm volatile("mfmsr %0":"=r"(msr));
|
||||
asm volatile("mftcr %0":"=r"(tcr));
|
||||
printk("MSR is 0x%08x, TCR 0x%08x\n",msr,tcr);
|
||||
asm volatile("mttcr %0"::"r"(0));
|
||||
if (0) {
|
||||
asm volatile("mtmsr %0"::"r"(msr|0x8000));
|
||||
for (i=0; i<12; i++)
|
||||
BSP_enable_irq_at_pic(i);
|
||||
printk("IRQS enabled\n");
|
||||
}
|
||||
}
|
||||
if (1) {
|
||||
int i;
|
||||
unsigned msr,tcr;
|
||||
asm volatile("mfmsr %0":"=r"(msr));
|
||||
asm volatile("mftcr %0":"=r"(tcr));
|
||||
printk("MSR is 0x%08x, TCR 0x%08x\n",msr,tcr);
|
||||
asm volatile("mttcr %0"::"r"(0));
|
||||
if (0) {
|
||||
asm volatile("mtmsr %0"::"r"(msr|0x8000));
|
||||
for (i=0; i<12; i++)
|
||||
BSP_enable_irq_at_pic(i);
|
||||
printk("IRQS enabled\n");
|
||||
}
|
||||
}
|
||||
|
||||
if (0) {
|
||||
unsigned x;
|
||||
asm volatile("mfivpr %0":"=r"(x));
|
||||
printk("IVPR: 0x%08x\n",x);
|
||||
asm volatile("mfivor8 %0":"=r"(x));
|
||||
printk("IVOR8: 0x%08x\n",x);
|
||||
printk("0x%08x\n",*(unsigned *)0xc00);
|
||||
printk("0x%08x\n",*(unsigned *)0xc04);
|
||||
printk("0x%08x\n",*(unsigned *)0xc08);
|
||||
printk("0x%08x\n\n\n",*(unsigned *)0xc0c);
|
||||
if (0) {
|
||||
*(unsigned *)0xc08 = 0x4c000064;
|
||||
asm volatile("dcbf 0, %0; icbi 0, %0; sync; isync"::"r"(0xc00));
|
||||
}
|
||||
if (0) {
|
||||
unsigned x;
|
||||
asm volatile("mfivpr %0":"=r"(x));
|
||||
printk("IVPR: 0x%08x\n",x);
|
||||
asm volatile("mfivor8 %0":"=r"(x));
|
||||
printk("IVOR8: 0x%08x\n",x);
|
||||
printk("0x%08x\n",*(unsigned *)0xc00);
|
||||
printk("0x%08x\n",*(unsigned *)0xc04);
|
||||
printk("0x%08x\n",*(unsigned *)0xc08);
|
||||
printk("0x%08x\n\n\n",*(unsigned *)0xc0c);
|
||||
if (0) {
|
||||
*(unsigned *)0xc08 = 0x4c000064;
|
||||
asm volatile("dcbf 0, %0; icbi 0, %0; sync; isync"::"r"(0xc00));
|
||||
}
|
||||
|
||||
printk("0x%08x\n", ppc_exc_lock_std);
|
||||
printk("0x%08x\n", ppc_exc_gpr3_std);
|
||||
printk("0x%08x\n", ppc_exc_lock_std);
|
||||
printk("0x%08x\n", ppc_exc_gpr3_std);
|
||||
|
||||
asm volatile("sc");
|
||||
asm volatile("sc");
|
||||
|
||||
printk("0x%08x\n", ppc_exc_lock_std);
|
||||
printk("0x%08x\n", ppc_exc_gpr3_std);
|
||||
}
|
||||
printk("0x%08x\n", ppc_exc_lock_std);
|
||||
printk("0x%08x\n", ppc_exc_gpr3_std);
|
||||
}
|
||||
|
||||
printk("-----------------------------------------\n");
|
||||
printk("-----------------------------------------\n");
|
||||
|
||||
#ifdef SHOW_MORE_INIT_SETTINGS
|
||||
printk("Exit from bspstart\n");
|
||||
printk("Exit from bspstart\n");
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user