forked from Imagelibrary/rtems
Remove everything.
This commit is contained in:
Ralf Corsepius
@@ -1,39 +0,0 @@
|
||||
dnl
|
||||
dnl $Id$
|
||||
dnl
|
||||
|
||||
dnl _RTEMS_BSP_ALIAS(BSP_ALIAS,RTEMS_BSP_FAMILY)
|
||||
dnl Internal subroutine to RTEMS_BSP_ALIAS
|
||||
AC_DEFUN(_RTEMS_BSP_ALIAS,
|
||||
[# account for "aliased" bsps which share source code
|
||||
case $1 in
|
||||
simcpu32) $2=sim68000 ;; # BSVC CPU32 variant
|
||||
c3xsim) $2=c4xsim ;; # TI C3x Simulator in gdb
|
||||
mcp750) $2=motorola_powerpc ;; # Motorola PPC board variant
|
||||
mvme2307) $2=motorola_powerpc ;; # Motorola PPC board variant
|
||||
mvme162lx) $2=mvme162 ;; # m68k - mvme162 board variant
|
||||
gen68360_040) $2=gen68360 ;; # m68k - 68360 in companion mode
|
||||
p4600) $2=p4000 ;; # mips64orion - p4000 board w/IDT 4600
|
||||
p4650) $2=p4000 ;; # mips64orion - p4000 board w/IDT 4650
|
||||
mbx8*) $2=mbx8xx ;; # MBX821/MBX860 board
|
||||
pc386dx) $2=pc386 ;; # i386 - PC w/o FPU
|
||||
pc486) $2=pc386 ;; # i386 - PC with i486DX
|
||||
pc586) $2=pc386 ;; # i386 - PC with Pentium
|
||||
pc686) $2=pc386 ;; # i386 - PC with PentiumPro
|
||||
pck6) $2=pc386 ;; # i386 - PC with K6
|
||||
bare*) $2=bare ;; # EXP: bare-aliases
|
||||
erc32nfp) $2=erc32 ;; # erc32 without fpu
|
||||
leon1) $2=leon ;; # leon without fpu
|
||||
leon2) $2=leon ;; # leon with fpu
|
||||
simsh7032) $2=shsim ;; # SH7032 simulator
|
||||
simsh7045) $2=shsim ;; # SH7045 simulator
|
||||
*) $2=$1;;
|
||||
esac]
|
||||
)
|
||||
|
||||
dnl RTEMS_BSP_ALIAS(BSP_ALIAS,RTEMS_BSP_FAMILY)
|
||||
dnl convert a bsp alias $1 into its bsp directory RTEMS_BSP_FAMILY
|
||||
AC_DEFUN(RTEMS_BSP_ALIAS,
|
||||
[_RTEMS_BSP_ALIAS(m4_if([$1],,[$RTEMS_BSP],[$1]),
|
||||
m4_if([$2],,[RTEMS_BSP_FAMILY],[$2]))]
|
||||
)
|
||||
@@ -1,25 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
AC_DEFUN(RTEMS_CANONICAL_HOST,
|
||||
[dnl
|
||||
AC_REQUIRE([AC_CANONICAL_HOST])
|
||||
RTEMS_HOST=$host_os
|
||||
case "${target}" in
|
||||
# hpux unix port should go here
|
||||
i[[34567]]86-*linux*) # unix "simulator" port
|
||||
RTEMS_HOST=Linux
|
||||
;;
|
||||
i[[34567]]86-*freebsd*) # unix "simulator" port
|
||||
RTEMS_HOST=FreeBSD
|
||||
;;
|
||||
i[[34567]]86-pc-cygwin*) # Cygwin is just enough unix like :)
|
||||
RTEMS_HOST=Cygwin
|
||||
;;
|
||||
sparc-sun-solaris*) # unix "simulator" port
|
||||
RTEMS_HOST=Solaris
|
||||
;;
|
||||
*)
|
||||
;;
|
||||
esac
|
||||
AC_SUBST(RTEMS_HOST)
|
||||
])dnl
|
||||
@@ -1,38 +0,0 @@
|
||||
dnl
|
||||
dnl $Id$
|
||||
dnl
|
||||
|
||||
dnl canonicalize target cpu
|
||||
dnl NOTE: Most rtems targets do not fullfil autoconf's
|
||||
dnl target naming conventions "processor-vendor-os"
|
||||
dnl Therefore autoconf's AC_CANONICAL_TARGET will fail for them
|
||||
dnl and we have to fix it for rtems ourselves
|
||||
|
||||
AC_DEFUN(RTEMS_CANONICAL_TARGET_CPU,
|
||||
[
|
||||
AC_CANONICAL_TARGET
|
||||
AC_MSG_CHECKING(rtems target cpu)
|
||||
case "${target}" in
|
||||
# hpux unix port should go here
|
||||
i[[34567]]86-*linux*) # unix "simulator" port
|
||||
RTEMS_CPU=unix
|
||||
;;
|
||||
i[[34567]]86-*freebsd*) # unix "simulator" port
|
||||
RTEMS_CPU=unix
|
||||
;;
|
||||
i[[34567]]86-pc-cygwin*) # Cygwin is just enough unix like :)
|
||||
RTEMS_CPU=unix
|
||||
;;
|
||||
no_cpu-*rtems*)
|
||||
RTEMS_CPU=no_cpu
|
||||
;;
|
||||
sparc-sun-solaris*) # unix "simulator" port
|
||||
RTEMS_CPU=unix
|
||||
;;
|
||||
*)
|
||||
RTEMS_CPU=`echo $target | sed 's%^\([[^-]]*\)-\(.*\)$%\1%'`
|
||||
;;
|
||||
esac
|
||||
AC_SUBST(RTEMS_CPU)
|
||||
AC_MSG_RESULT($RTEMS_CPU)
|
||||
])
|
||||
@@ -1,16 +0,0 @@
|
||||
dnl
|
||||
dnl $Id$
|
||||
dnl
|
||||
dnl Set target tools
|
||||
dnl
|
||||
|
||||
AC_DEFUN(RTEMS_CANONICALIZE_TOOLS,
|
||||
[AC_REQUIRE([RTEMS_PROG_CC])dnl
|
||||
|
||||
dnl FIXME: What shall be done if these tools are not available?
|
||||
RTEMS_CHECK_TOOL(AR,ar,no)
|
||||
RTEMS_CHECK_TOOL(LD,ld,no)
|
||||
|
||||
dnl special treatment of ranlib
|
||||
RTEMS_CHECK_TOOL(RANLIB,ranlib,:)
|
||||
])
|
||||
@@ -1,13 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
dnl RTEMS_CHECK_BSP_CACHE(RTEMS_BSP)
|
||||
AC_DEFUN(RTEMS_CHECK_BSP_CACHE,
|
||||
[
|
||||
AC_REQUIRE([RTEMS_CHECK_CPU])dnl sets RTEMS_CPU, target
|
||||
AC_REQUIRE([RTEMS_ENV_RTEMSBSP])dnl set RTEMS_BSP
|
||||
AC_REQUIRE([RTEMS_TOP])dnl sets RTEMS_TOPdir
|
||||
AC_CACHE_CHECK([for RTEMS_CPU_MODEL], rtems_cv_RTEMS_CPU_MODEL,
|
||||
. $RTEMS_TOPdir/c/[$]$1/make/[$]$1.cache)
|
||||
RTEMS_CPU_MODEL=$rtems_cv_RTEMS_CPU_MODEL
|
||||
AC_SUBST(RTEMS_CPU_MODEL)
|
||||
])dnl
|
||||
@@ -1,13 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
AC_DEFUN(RTEMS_CHECK_CUSTOM_BSP,
|
||||
[dnl
|
||||
AC_REQUIRE([RTEMS_TOP])
|
||||
|
||||
AC_MSG_CHECKING([for make/custom/[$]$1.cfg])
|
||||
if test -r "$srcdir/$RTEMS_TOPdir/../../make/custom/[$]$1.cfg"; then
|
||||
AC_MSG_RESULT([yes])
|
||||
else
|
||||
AC_MSG_ERROR([no])
|
||||
fi
|
||||
])dnl
|
||||
@@ -1,17 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
dnl check if RTEMS support a cpu
|
||||
AC_DEFUN(RTEMS_CHECK_CPU,
|
||||
[dnl
|
||||
AC_REQUIRE([RTEMS_TOP])
|
||||
AC_REQUIRE([RTEMS_CANONICAL_TARGET_CPU])
|
||||
|
||||
# Is this a supported CPU?
|
||||
AC_MSG_CHECKING([if cpu $RTEMS_CPU is supported])
|
||||
if test -d "$srcdir/$RTEMS_TOPdir/exec/score/cpu/$RTEMS_CPU"; then
|
||||
AC_MSG_RESULT(yes)
|
||||
else
|
||||
AC_MSG_ERROR(no)
|
||||
fi
|
||||
])dnl
|
||||
|
||||
@@ -1,37 +0,0 @@
|
||||
dnl $Id$
|
||||
dnl
|
||||
AC_DEFUN(RTEMS_CHECK_ITRON_API,
|
||||
[dnl
|
||||
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
|
||||
AC_REQUIRE([RTEMS_ENABLE_ITRON])dnl
|
||||
|
||||
AC_CACHE_CHECK([whether CPU supports libitron],
|
||||
rtems_cv_HAS_ITRON_API,
|
||||
[dnl
|
||||
case "$RTEMS_CPU" in
|
||||
unix*)
|
||||
rtems_cv_HAS_ITRON_API="no"
|
||||
;;
|
||||
*)
|
||||
if test "${RTEMS_HAS_ITRON_API}" = "yes"; then
|
||||
rtems_cv_HAS_ITRON_API="yes";
|
||||
else
|
||||
rtems_cv_HAS_ITRON_API="disabled";
|
||||
fi
|
||||
;;
|
||||
esac])
|
||||
if test "$rtems_cv_HAS_ITRON_API" = "yes"; then
|
||||
HAS_ITRON_API="yes";
|
||||
else
|
||||
HAS_ITRON_API="no";
|
||||
fi
|
||||
AC_SUBST(HAS_ITRON_API)dnl
|
||||
])
|
||||
|
||||
AC_DEFUN(RTEMS_DEFINE_ITRON_API,
|
||||
[AC_REQUIRE([RTEMS_CHECK_ITRON_API])dnl
|
||||
if test x"${HAS_ITRON_API}" = x"yes";
|
||||
then
|
||||
AC_DEFINE_UNQUOTED(RTEMS_ITRON_API,1,[if itron api is supported])
|
||||
fi
|
||||
])
|
||||
@@ -1,22 +0,0 @@
|
||||
dnl
|
||||
dnl $Id$
|
||||
dnl
|
||||
|
||||
AC_DEFUN(RTEMS_CHECK_MULTIPROCESSING,
|
||||
[dnl
|
||||
AC_REQUIRE([RTEMS_ENV_RTEMSCPU])dnl
|
||||
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
|
||||
AC_REQUIRE([RTEMS_ENABLE_MULTIPROCESSING])dnl
|
||||
|
||||
AS_IF([test "$enable_multiprocessing" = "yes"],
|
||||
[HAS_MP="yes"],
|
||||
[HAS_MP="no"])
|
||||
])
|
||||
|
||||
AC_DEFUN(RTEMS_DEFINE_MULTIPROCESSING,
|
||||
[AC_REQUIRE([RTEMS_CHECK_MULTIPROCESSING])dnl
|
||||
if test x"${HAS_MP}" = x"yes";
|
||||
then
|
||||
AC_DEFINE_UNQUOTED(RTEMS_MULTIPROCESSING,1,[if multiprocessing is enabled])
|
||||
fi
|
||||
])
|
||||
@@ -1,29 +0,0 @@
|
||||
dnl $Id$
|
||||
dnl
|
||||
AC_DEFUN(RTEMS_CHECK_NETWORKING,
|
||||
[dnl
|
||||
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
|
||||
AC_REQUIRE([RTEMS_ENABLE_NETWORKING])dnl
|
||||
|
||||
AC_CACHE_CHECK([whether BSP supports networking],
|
||||
rtems_cv_HAS_NETWORKING,
|
||||
[dnl
|
||||
case "$RTEMS_CPU" in
|
||||
unix*)
|
||||
rtems_cv_HAS_NETWORKING="no"
|
||||
;;
|
||||
*)
|
||||
if test "${RTEMS_HAS_NETWORKING}" = "yes"; then
|
||||
rtems_cv_HAS_NETWORKING="yes";
|
||||
else
|
||||
rtems_cv_HAS_NETWORKING="disabled";
|
||||
fi
|
||||
;;
|
||||
esac])
|
||||
if test "$rtems_cv_HAS_NETWORKING" = "yes"; then
|
||||
HAS_NETWORKING="yes";
|
||||
else
|
||||
HAS_NETWORKING="no";
|
||||
fi
|
||||
AC_SUBST(HAS_NETWORKING)dnl
|
||||
])
|
||||
@@ -1,31 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
AC_DEFUN(RTEMS_CHECK_NEWLIB,
|
||||
[dnl
|
||||
AC_REQUIRE([RTEMS_PROG_CC_FOR_TARGET])dnl
|
||||
AC_REQUIRE([RTEMS_CANONICALIZE_TOOLS])dnl
|
||||
AC_CACHE_CHECK([for RTEMS newlib],
|
||||
rtems_cv_use_newlib,
|
||||
[
|
||||
dnl some versions of newlib provide not_required_by_rtems
|
||||
AC_TRY_LINK(
|
||||
[extern void not_required_by_rtems() ;],
|
||||
[not_required_by_rtems()],
|
||||
rtems_cv_use_newlib="yes")
|
||||
|
||||
dnl some versions of newlib provide rtems_provides_crt0()
|
||||
AS_IF([test -z "$rtems_cv_use_newlib"],
|
||||
[AC_TRY_LINK(
|
||||
[extern void rtems_provides_crt0() ;],
|
||||
[rtems_provides_crt0()],
|
||||
rtems_cv_use_newlib="yes",
|
||||
rtems_cv_use_newlib="no")]
|
||||
)
|
||||
])
|
||||
RTEMS_USE_NEWLIB="$rtems_cv_use_newlib"
|
||||
AC_SUBST(RTEMS_USE_NEWLIB)
|
||||
|
||||
AS_IF([test x"${RTEMS_USE_NEWLIB}" = x"yes"],
|
||||
[ AC_DEFINE_UNQUOTED(RTEMS_NEWLIB,1,[if using newlib])]
|
||||
)
|
||||
])
|
||||
@@ -1,36 +0,0 @@
|
||||
dnl $Id$
|
||||
dnl
|
||||
AC_DEFUN(RTEMS_CHECK_POSIX_API,
|
||||
[dnl
|
||||
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
|
||||
AC_REQUIRE([RTEMS_ENABLE_POSIX])dnl
|
||||
|
||||
AC_CACHE_CHECK([whether CPU supports libposix],
|
||||
rtems_cv_HAS_POSIX_API,
|
||||
[dnl
|
||||
case "$RTEMS_CPU" in
|
||||
unix*)
|
||||
rtems_cv_HAS_POSIX_API="no"
|
||||
;;
|
||||
*)
|
||||
if test "${RTEMS_HAS_POSIX_API}" = "yes"; then
|
||||
rtems_cv_HAS_POSIX_API="yes";
|
||||
else
|
||||
rtems_cv_HAS_POSIX_API="disabled";
|
||||
fi
|
||||
;;
|
||||
esac])
|
||||
if test "$rtems_cv_HAS_POSIX_API" = "yes"; then
|
||||
HAS_POSIX_API="yes";
|
||||
else
|
||||
HAS_POSIX_API="no";
|
||||
fi
|
||||
AC_SUBST(HAS_POSIX_API)dnl
|
||||
])
|
||||
|
||||
AC_DEFUN(RTEMS_DEFINE_POSIX_API,
|
||||
[AC_REQUIRE([RTEMS_CHECK_POSIX_API])dnl
|
||||
AS_IF(
|
||||
[test x"${HAS_POSIX_API}" = x"yes"],
|
||||
[AC_DEFINE_UNQUOTED(RTEMS_POSIX_API,1,[if posix api is supported])])
|
||||
])
|
||||
@@ -1,11 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
## Check for a cross tool, similar to AC_CHECK_TOOL, but do not fall back to
|
||||
## the un-prefixed version of PROG-TO-CHECK-FOR.
|
||||
dnl RTEMS_CHECK_TOOL(VARIABLE, PROG-TO-CHECK-FOR[, VALUE-IF-NOT-FOUND [, PATH]])
|
||||
AC_DEFUN(RTEMS_CHECK_TOOL,
|
||||
[
|
||||
AS_IF([test "x$build_alias" != "x$host_alias"],
|
||||
[rtems_tool_prefix=${ac_tool_prefix}])
|
||||
AC_CHECK_PROG($1, ${rtems_tool_prefix}$2, ${rtems_tool_prefix}$2, $3, $4)
|
||||
])
|
||||
@@ -1,19 +0,0 @@
|
||||
AC_DEFUN(RTEMS_ENABLE_BARE,
|
||||
[
|
||||
AC_ARG_ENABLE(bare-cpu-cflags,
|
||||
AC_HELP_STRING([--enable-bare-cpu-cflags],[specify a particular cpu cflag (bare bsp specific)]),
|
||||
[case "${enableval}" in
|
||||
no) BARE_CPU_CFLAGS="" ;;
|
||||
*) BARE_CPU_CFLAGS="${enableval}" ;;
|
||||
esac],
|
||||
[BARE_CPU_CFLAGS=""])
|
||||
|
||||
AC_ARG_ENABLE(bare-cpu-model,
|
||||
AC_HELP_STRING([--enable-bare-cpu-model],[specify a particular cpu model (bare bsp specific)]),
|
||||
[case "${enableval}" in
|
||||
no) BARE_CPU_MODEL="" ;;
|
||||
*) BARE_CPU_MODEL="${enableval}" ;;
|
||||
esac],
|
||||
[BARE_CPU_MODEL=""])
|
||||
])
|
||||
|
||||
@@ -1,21 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
AC_DEFUN(RTEMS_ENABLE_INLINES,
|
||||
[AC_ARG_ENABLE(rtems-inlines,
|
||||
AC_HELP_STRING([--enable-rtems-inlines],[enable RTEMS inline functions (default:enabled, disable to use macros)]),
|
||||
[case "${enableval}" in
|
||||
yes) RTEMS_USE_MACROS=no ;;
|
||||
no) RTEMS_USE_MACROS=yes ;;
|
||||
*) AC_MSG_ERROR(bad value ${enableval} for disable-rtems-inlines option) ;;
|
||||
esac],[RTEMS_USE_MACROS=no])
|
||||
AC_SUBST(RTEMS_USE_MACROS)dnl
|
||||
|
||||
if test x"${RTEMS_USE_MACROS}" = x"yes";
|
||||
then
|
||||
AC_DEFINE_UNQUOTED(USE_MACROS,1,[if using macros])
|
||||
else
|
||||
AC_DEFINE_UNQUOTED(USE_INLINES,1,[if using inlines])
|
||||
fi
|
||||
|
||||
|
||||
])
|
||||
@@ -1,33 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
AC_DEFUN(RTEMS_ENABLE_ITRON,
|
||||
[
|
||||
## AC_BEFORE([$0], [RTEMS_CHECK_ITRON_API])dnl
|
||||
|
||||
AC_ARG_ENABLE(itron,
|
||||
AC_HELP_STRING([--enable-itron],[enable itron interface]),
|
||||
[case "${enableval}" in
|
||||
yes) RTEMS_HAS_ITRON_API=yes ;;
|
||||
no) RTEMS_HAS_ITRON_API=no ;;
|
||||
*) AC_MSG_ERROR(bad value ${enableval} for enable-itron option) ;;
|
||||
esac],[RTEMS_HAS_ITRON_API=yes])
|
||||
|
||||
case "${host}" in
|
||||
# hpux unix port should go here
|
||||
i[[34567]]86-pc-linux*) # unix "simulator" port
|
||||
RTEMS_HAS_ITRON_API=no
|
||||
;;
|
||||
i[[34567]]86-*freebsd*) # unix "simulator" port
|
||||
RTEMS_HAS_ITRON_API=no
|
||||
;;
|
||||
no_cpu-*rtems*)
|
||||
RTEMS_HAS_ITRON_API=no
|
||||
;;
|
||||
sparc-sun-solaris*) # unix "simulator" port
|
||||
RTEMS_HAS_ITRON_API=no
|
||||
;;
|
||||
*)
|
||||
;;
|
||||
esac
|
||||
AC_SUBST(RTEMS_HAS_ITRON_API)
|
||||
])
|
||||
@@ -1,12 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
AC_DEFUN(RTEMS_ENABLE_MULTIPROCESSING,
|
||||
[
|
||||
AC_ARG_ENABLE(multiprocessing,
|
||||
AC_HELP_STRING([--enable-multiprocessing],[enable multiprocessing interface]),
|
||||
[case "${enable_multiprocessing}" in
|
||||
yes) ;;
|
||||
no) ;;
|
||||
*) AC_MSG_ERROR(bad value ${enableval} for enable-multiprocessing option) ;;
|
||||
esac],[enable_multiprocessing=no])
|
||||
])
|
||||
@@ -1,15 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
AC_DEFUN(RTEMS_ENABLE_NETWORKING,
|
||||
[
|
||||
## AC_BEFORE([$0], [RTEMS_CHECK_NETWORKING])dnl
|
||||
|
||||
AC_ARG_ENABLE(networking,
|
||||
AC_HELP_STRING([--enable-networking],[enable TCP/IP stack]),
|
||||
[case "${enableval}" in
|
||||
yes) RTEMS_HAS_NETWORKING=yes ;;
|
||||
no) RTEMS_HAS_NETWORKING=no ;;
|
||||
*) AC_MSG_ERROR(bad value ${enableval} for enable-networking option) ;;
|
||||
esac],[RTEMS_HAS_NETWORKING=yes])
|
||||
AC_SUBST(RTEMS_HAS_NETWORKING)dnl
|
||||
])
|
||||
@@ -1,33 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
AC_DEFUN(RTEMS_ENABLE_POSIX,
|
||||
[
|
||||
## AC_BEFORE([$0], [RTEMS_CHECK_POSIX_API])dnl
|
||||
|
||||
AC_ARG_ENABLE(posix,
|
||||
AC_HELP_STRING([--enable-posix],[enable posix interface]),
|
||||
[case "${enableval}" in
|
||||
yes) RTEMS_HAS_POSIX_API=yes ;;
|
||||
no) RTEMS_HAS_POSIX_API=no ;;
|
||||
*) AC_MSG_ERROR(bad value ${enableval} for enable-posix option) ;;
|
||||
esac],[RTEMS_HAS_POSIX_API=yes])
|
||||
|
||||
case "${host}" in
|
||||
# hpux unix port should go here
|
||||
i[[34567]]86-pc-linux*) # unix "simulator" port
|
||||
RTEMS_HAS_POSIX_API=no
|
||||
;;
|
||||
i[[34567]]86-*freebsd*) # unix "simulator" port
|
||||
RTEMS_HAS_POSIX_API=no
|
||||
;;
|
||||
no_cpu-*rtems*)
|
||||
RTEMS_HAS_POSIX_API=no
|
||||
;;
|
||||
sparc-sun-solaris*) # unix "simulator" port
|
||||
RTEMS_HAS_POSIX_API=no
|
||||
;;
|
||||
*)
|
||||
;;
|
||||
esac
|
||||
AC_SUBST(RTEMS_HAS_POSIX_API)
|
||||
])
|
||||
@@ -1,16 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
dnl Override the set of BSPs to be built.
|
||||
dnl used by the toplevel configure script
|
||||
dnl RTEMS_ENABLE_RTEMSBSP(rtems_bsp_list)
|
||||
AC_DEFUN(RTEMS_ENABLE_RTEMSBSP,
|
||||
[
|
||||
AC_BEFORE([$0], [RTEMS_ENV_RTEMSBSP])dnl
|
||||
AC_ARG_ENABLE(rtemsbsp,
|
||||
AC_HELP_STRING([--enable-rtemsbsp="bsp1 bsp2 .."],
|
||||
[BSPs to include in build]),
|
||||
[case "${enableval}" in
|
||||
yes|no) AC_MSG_ERROR([missing argument to --enable-rtemsbsp=\"bsp1 bsp2\"]);;
|
||||
*) $1=$enableval;;
|
||||
esac],[$1=""])
|
||||
])
|
||||
@@ -1,47 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
dnl Pass a single BSP via an environment variable
|
||||
dnl used by per BSP configure scripts
|
||||
AC_DEFUN(RTEMS_ENV_RTEMSBSP,
|
||||
[dnl
|
||||
AC_BEFORE([$0], [RTEMS_ENABLE_RTEMSBSP])dnl
|
||||
AC_BEFORE([$0], [RTEMS_PROJECT_ROOT])dnl
|
||||
AC_BEFORE([$0], [RTEMS_CHECK_CUSTOM_BSP])dnl
|
||||
|
||||
AC_ARG_VAR([RTEMS_BSP],[RTEMS_BSP to build])
|
||||
AC_MSG_CHECKING([for RTEMS_BSP])
|
||||
AC_CACHE_VAL(rtems_cv_RTEMS_BSP,
|
||||
[dnl
|
||||
test -n "${RTEMS_BSP}" && rtems_cv_RTEMS_BSP="$RTEMS_BSP";
|
||||
])dnl
|
||||
if test -z "$rtems_cv_RTEMS_BSP"; then
|
||||
AC_MSG_ERROR([Missing RTEMS_BSP])
|
||||
fi
|
||||
RTEMS_BSP="$rtems_cv_RTEMS_BSP"
|
||||
AC_MSG_RESULT(${RTEMS_BSP})
|
||||
AC_SUBST(RTEMS_BSP)
|
||||
|
||||
RTEMS_BSP_SPECS="-specs bsp_specs -qrtems"
|
||||
AC_SUBST(RTEMS_BSP_SPECS)
|
||||
|
||||
GCC_SPECS="-B\$(PROJECT_ROOT)/lib/ -B\$(PROJECT_ROOT)/$RTEMS_BSP/lib/"
|
||||
AC_SUBST(GCC_SPECS)
|
||||
|
||||
PROJECT_INCLUDE="\$(PROJECT_ROOT)/$RTEMS_BSP/lib/include"
|
||||
AC_SUBST(PROJECT_INCLUDE)
|
||||
|
||||
PROJECT_RELEASE="\$(PROJECT_ROOT)/$RTEMS_BSP"
|
||||
AC_SUBST(PROJECT_RELEASE)
|
||||
|
||||
RTEMS_ROOT=$PROJECT_ROOT/c/$RTEMS_BSP
|
||||
AC_SUBST(RTEMS_ROOT)
|
||||
|
||||
RTEMS_ENABLE_BARE
|
||||
AC_SUBST(BARE_CPU_MODEL)
|
||||
AC_SUBST(BARE_CPU_CFLAGS)
|
||||
|
||||
AM_CONDITIONAL([RTEMS_CONFIG_PER_BSP],[true])
|
||||
AM_CONDITIONAL([MULTILIB],[false])
|
||||
|
||||
includedir="\${exec_prefix}/${RTEMS_BSP}/lib/include"
|
||||
])
|
||||
@@ -1,41 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
AC_DEFUN(RTEMS_ENV_RTEMSCPU,
|
||||
[AC_REQUIRE([RTEMS_ENABLE_MULTILIB])
|
||||
|
||||
if test x"$multilib" = x"yes"; then
|
||||
## FIXME: There is no multilib BSP
|
||||
RTEMS_BSP_SPECS=""
|
||||
AC_SUBST(RTEMS_BSP_SPECS)
|
||||
|
||||
if test -n "$with_multisubdir"; then
|
||||
MULTIBUILDTOP=`echo "/$with_multisubdir" | sed 's,/[[^\\/]]*,../,g'`
|
||||
fi
|
||||
AC_SUBST(MULTIBUILDTOP)
|
||||
|
||||
if test -n "$with_multisubdir"; then
|
||||
MULTISUBDIR="/$with_multisubdir"
|
||||
fi
|
||||
AC_SUBST(MULTISUBDIR)
|
||||
|
||||
PROJECT_ROOT="../../${RTEMS_TOPdir}/\$(MULTIBUILDTOP)\$(top_builddir)"
|
||||
GCC_SPECS="-isystem \$(PROJECT_ROOT)/lib/include"
|
||||
AC_SUBST(GCC_SPECS)
|
||||
|
||||
PROJECT_INCLUDE="\$(PROJECT_ROOT)/lib/include"
|
||||
AC_SUBST(PROJECT_INCLUDE)
|
||||
|
||||
PROJECT_RELEASE="\$(PROJECT_ROOT)"
|
||||
AC_SUBST(PROJECT_RELEASE)
|
||||
|
||||
RTEMS_ROOT=${PROJECT_ROOT}
|
||||
AC_SUBST(RTEMS_ROOT)
|
||||
|
||||
includedir="\${exec_prefix}/lib/include"
|
||||
libdir="${libdir}\$(MULTISUBDIR)"
|
||||
AM_CONDITIONAL([RTEMS_CONFIG_PER_BSP],[false])
|
||||
else
|
||||
RTEMS_ENV_RTEMSBSP
|
||||
RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP)
|
||||
fi
|
||||
])
|
||||
@@ -1,21 +0,0 @@
|
||||
dnl
|
||||
dnl $Id$
|
||||
dnl
|
||||
dnl Check whether the target compiler accepts -pipe
|
||||
dnl
|
||||
|
||||
AC_DEFUN(RTEMS_GCC_PIPE,
|
||||
[AC_REQUIRE([RTEMS_PROG_CC])
|
||||
AC_REQUIRE([AC_CANONICAL_HOST])
|
||||
AC_CACHE_CHECK(whether $CC accepts --pipe,rtems_cv_gcc_pipe,
|
||||
[
|
||||
rtems_cv_gcc_pipe=no
|
||||
if test x"$GCC" = x"yes"; then
|
||||
echo 'void f(){}' >conftest.c
|
||||
if test -z "`${CC} --pipe -c conftest.c 2>&1`";then
|
||||
rtems_cv_gcc_pipe=yes
|
||||
fi
|
||||
rm -f conftest*
|
||||
fi
|
||||
])
|
||||
])
|
||||
@@ -1,20 +0,0 @@
|
||||
dnl
|
||||
dnl $Id$
|
||||
dnl
|
||||
dnl Check whether the target compiler accepts -specs
|
||||
dnl
|
||||
|
||||
AC_DEFUN(RTEMS_GCC_SPECS,
|
||||
[AC_REQUIRE([RTEMS_PROG_CC])
|
||||
AC_CACHE_CHECK(whether $CC accepts -specs,rtems_cv_gcc_specs,
|
||||
[
|
||||
rtems_cv_gcc_specs=no
|
||||
if test x"$GCC" = x"yes"; then
|
||||
touch confspec
|
||||
echo 'void f(){}' >conftest.c
|
||||
if test -z "`${CC} -specs confspec -c conftest.c 2>&1`";then
|
||||
rtems_cv_gcc_specs=yes
|
||||
fi
|
||||
fi
|
||||
rm -f confspec conftest*
|
||||
])])
|
||||
@@ -1,53 +0,0 @@
|
||||
#serial 99
|
||||
|
||||
AC_DEFUN(AC_ENABLE_MULTILIB,
|
||||
[
|
||||
AC_ARG_ENABLE(multilib,
|
||||
AC_HELP_STRING([--enable-multilib],
|
||||
[build many library versions (default=no)]),
|
||||
[case "${enableval}" in
|
||||
yes) multilib=yes ;;
|
||||
no) multilib=no ;;
|
||||
*) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
|
||||
esac], [multilib=no])dnl
|
||||
|
||||
AM_CONDITIONAL(MULTILIB,test x"${multilib}" = x"yes")
|
||||
|
||||
dnl We may get other options which we don't document:
|
||||
dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
|
||||
|
||||
if test "[$]{srcdir}" = "."; then
|
||||
if test "[$]{with_target_subdir}" != "."; then
|
||||
multilib_basedir="[$]{srcdir}/[$]{with_multisrctop}../ifelse([$2],,,[$2])"
|
||||
else
|
||||
multilib_basedir="[$]{srcdir}/[$]{with_multisrctop}ifelse([$2],,,[$2])"
|
||||
fi
|
||||
else
|
||||
multilib_basedir="[$]{srcdir}/ifelse([$2],,,[$2])"
|
||||
fi
|
||||
AC_SUBST(multilib_basedir)
|
||||
|
||||
if test "${multilib}" = "yes"; then
|
||||
multilib_arg="--enable-multilib"
|
||||
else
|
||||
multilib_arg=
|
||||
fi
|
||||
|
||||
AC_OUTPUT_COMMANDS(
|
||||
[case " $CONFIG_FILES " in
|
||||
*" ]m4_if([$1],,Makefile,[$1])[ "*)
|
||||
ac_file=]m4_if([$1],,Makefile,[$1])[ . ${multilib_basedir}/config-ml.in
|
||||
esac],
|
||||
[
|
||||
srcdir=${srcdir}
|
||||
host=${host}
|
||||
target=${target}
|
||||
with_multisrctop="${with_multisrctop}"
|
||||
with_target_subdir="${with_target_subdir}"
|
||||
with_multisubdir="${with_multisubdir}"
|
||||
ac_configure_args="${multilib_arg} ${ac_configure_args}"
|
||||
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
|
||||
multilib_basedir=${multilib_basedir}
|
||||
CC="${CC}"]
|
||||
)
|
||||
])
|
||||
@@ -1,59 +0,0 @@
|
||||
dnl This provides configure definitions used for multilib support
|
||||
|
||||
dnl parts of these macros are derived from newlib-1.8.2's multilib support
|
||||
|
||||
AC_DEFUN(RTEMS_ENABLE_MULTILIB,
|
||||
[
|
||||
AC_ARG_ENABLE(multilib,
|
||||
AC_HELP_STRING([--enable-multilib],
|
||||
[build many library versions (default=no)]),
|
||||
[case "${enableval}" in
|
||||
yes) multilib=yes ;;
|
||||
no) multilib=no ;;
|
||||
*) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
|
||||
esac], [multilib=no])dnl
|
||||
|
||||
AM_CONDITIONAL(MULTILIB,test x"${multilib}" = x"yes")
|
||||
])
|
||||
|
||||
AC_DEFUN([RTEMS_ENABLE_MULTILIB_MASTER],
|
||||
[
|
||||
AC_REQUIRE([RTEMS_ENABLE_MULTILIB])
|
||||
|
||||
dnl We may get other options which we don't document:
|
||||
dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
|
||||
|
||||
if test "[$]{srcdir}" = "."; then
|
||||
if test "[$]{with_target_subdir}" != "."; then
|
||||
multilib_basedir="[$]{srcdir}/[$]{with_multisrctop}../ifelse([$2],,,[$2])"
|
||||
else
|
||||
multilib_basedir="[$]{srcdir}/[$]{with_multisrctop}ifelse([$2],,,[$2])"
|
||||
fi
|
||||
else
|
||||
multilib_basedir="[$]{srcdir}/ifelse([$2],,,[$2])"
|
||||
fi
|
||||
AC_SUBST(multilib_basedir)
|
||||
|
||||
if test "${multilib}" = "yes"; then
|
||||
multilib_arg="--enable-multilib"
|
||||
else
|
||||
multilib_arg=
|
||||
fi
|
||||
|
||||
AC_OUTPUT_COMMANDS(
|
||||
[case " $CONFIG_FILES " in
|
||||
*" ]m4_if([$1],,Makefile,[$1])[ "*)
|
||||
ac_file=]m4_if([$1],,Makefile,[$1])[ . ${multilib_basedir}/config-ml.in
|
||||
esac],
|
||||
[
|
||||
srcdir=${srcdir}
|
||||
host=${host}
|
||||
target=${target}
|
||||
with_multisrctop="${with_multisrctop}"
|
||||
with_target_subdir="${with_target_subdir}"
|
||||
with_multisubdir="${with_multisubdir}"
|
||||
ac_configure_args="${multilib_arg} ${ac_configure_args}"
|
||||
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
|
||||
multilib_basedir=${multilib_basedir}
|
||||
CC="${CC}"])
|
||||
])
|
||||
@@ -1,45 +0,0 @@
|
||||
dnl
|
||||
dnl $Id$
|
||||
dnl
|
||||
dnl Check for target gcc
|
||||
dnl
|
||||
|
||||
AC_DEFUN(RTEMS_PROG_CC,
|
||||
[
|
||||
AC_BEFORE([$0], [AC_PROG_CPP])dnl
|
||||
AC_BEFORE([$0], [AC_PROG_CC])dnl
|
||||
AC_BEFORE([$0], [RTEMS_CANONICALIZE_TOOLS])dnl
|
||||
|
||||
RTEMS_CHECK_TOOL(CC,gcc)
|
||||
test -z "$CC" && \
|
||||
AC_MSG_ERROR([no acceptable cc found in \$PATH])
|
||||
AC_PROG_CC
|
||||
AC_PROG_CPP
|
||||
|
||||
AM_CONDITIONAL(RTEMS_USE_GCC,test x"$GCC" = x"yes")
|
||||
])
|
||||
|
||||
AC_DEFUN(RTEMS_PROG_CC_FOR_TARGET,
|
||||
[
|
||||
dnl check target cc
|
||||
RTEMS_PROG_CC
|
||||
dnl check if the compiler supports --specs
|
||||
RTEMS_GCC_SPECS
|
||||
dnl check if the target compiler may use --pipe
|
||||
RTEMS_GCC_PIPE
|
||||
test "$rtems_cv_gcc_pipe" = "yes" && CC="$CC --pipe"
|
||||
|
||||
if test "$GCC" = yes; then
|
||||
]
|
||||
m4_if([$1],,[],[CPPFLAGS="$CPPFLAGS $1"])
|
||||
[
|
||||
CFLAGS="-g -Wall"
|
||||
fi
|
||||
|
||||
dnl FIXME: HACK for egcs/cygwin mixing '\\' and '/' in gcc -print-*
|
||||
#case $build_os in
|
||||
#*cygwin*) GCCSED="| sed 's%\\\\%/%g'" ;;
|
||||
#*) ;;
|
||||
#esac
|
||||
AC_SUBST(GCCSED)
|
||||
])
|
||||
@@ -1,8 +0,0 @@
|
||||
## $Id$
|
||||
|
||||
AC_DEFUN([RTEMS_PROG_CCAS],
|
||||
[
|
||||
AC_REQUIRE([RTEMS_PROG_CC])
|
||||
AC_SUBST(CCAS,["$CC \$(GCCSPECS)"])
|
||||
AC_SUBST(CCASFLAGS,["-DASM \$(CFLAGS) \$(INCLUDES)"])
|
||||
])
|
||||
@@ -1,32 +0,0 @@
|
||||
AC_DEFUN([_RTEMS_CPU_SUBDIR],
|
||||
[
|
||||
$1 ) if test -d ${srcdir}/ifelse([$2],,[$1],[$2/$1]) ; then
|
||||
AC_CONFIG_SUBDIRS(ifelse([$2],,[$1],[$2/$1]))
|
||||
fi
|
||||
])
|
||||
|
||||
## RTEMS_CPU_SUBDIRS([PREFIX])
|
||||
AC_DEFUN([RTEMS_CPU_SUBDIRS],
|
||||
[
|
||||
## EDIT: If adding a new cpu to RTEMS, add it to the case block below.
|
||||
case $RTEMS_CPU in
|
||||
_RTEMS_CPU_SUBDIR([a29k],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([arm],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([c4x],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([h8300],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([hppa1.1],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([i386],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([i960],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([m68k],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([mips],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([mips64orion],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([no_cpu],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([or16],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([or32],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([powerpc],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([sh],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([sparc],[$1]);;
|
||||
_RTEMS_CPU_SUBDIR([unix],[$1]);;
|
||||
*) AC_MSG_ERROR([Invalid RTEMS_CPU])
|
||||
esac
|
||||
])
|
||||
@@ -1,19 +0,0 @@
|
||||
## $Id$
|
||||
|
||||
AC_DEFUN(RTEMS_ENABLE_RTEMS_DEBUG,
|
||||
[
|
||||
AC_ARG_ENABLE(rtems-debug,
|
||||
AC_HELP_STRING([--enable-rtems-debug],[enable RTEMS_DEBUG]),
|
||||
[case "${enable_rtems_debug}" in
|
||||
yes) enable_rtems_debug=yes ;;
|
||||
no) enable_rtems_debug=no ;;
|
||||
*) AC_MSG_ERROR([bad value ${enable_rtems_debug} for RTEMS_DEBUG]) ;;
|
||||
esac],[enable_rtems_debug=no])
|
||||
])
|
||||
|
||||
AC_DEFUN(RTEMS_CHECK_RTEMS_DEBUG,
|
||||
[AC_REQUIRE([RTEMS_ENABLE_RTEMS_DEBUG])
|
||||
AS_IF([test x"${enable_rtems_debug}" = x"yes"]
|
||||
[AC_DEFINE_UNQUOTED(RTEMS_DEBUG,1,[if RTEMS_DEBUG is enabled])])
|
||||
])
|
||||
|
||||
@@ -1,48 +0,0 @@
|
||||
dnl $Id$
|
||||
|
||||
dnl
|
||||
dnl RTEMS_TOP($1)
|
||||
dnl
|
||||
dnl $1 .. relative path from this configure.in to the toplevel configure.in
|
||||
dnl
|
||||
AC_DEFUN(RTEMS_TOP,
|
||||
[dnl
|
||||
AC_REQUIRE([RTEMS_VERSIONING])
|
||||
AC_CHECK_PROGS(MAKE, gmake make)
|
||||
AC_BEFORE([$0], [AC_CONFIG_AUX_DIR])dnl
|
||||
AC_BEFORE([$0], [AM_INIT_AUTOMAKE])dnl
|
||||
|
||||
AC_PREFIX_DEFAULT([/opt/rtems])
|
||||
|
||||
## HACK to allow gnu-make conditionals in automake-Makefiles.
|
||||
ENDIF=endif
|
||||
AC_SUBST(ENDIF)
|
||||
|
||||
RTEMS_TOPdir="$1";
|
||||
AC_SUBST(RTEMS_TOPdir)
|
||||
|
||||
## with_target_subdirs is handled implicitly by autoconf
|
||||
test -n "$with_target_subdir" || with_target_subdir="."
|
||||
|
||||
if test "$with_target_subdir" = "." ; then
|
||||
# Native
|
||||
PROJECT_TOPdir=${RTEMS_TOPdir}/'$(top_builddir)'
|
||||
else
|
||||
# Cross
|
||||
dots=`echo $with_target_subdir|\
|
||||
sed -e 's%^\./%%' -e 's%[[^/]]$%&/%' -e 's%[[^/]]*/%../%g'`
|
||||
PROJECT_TOPdir=${dots}${RTEMS_TOPdir}/'$(top_builddir)'
|
||||
fi
|
||||
AC_SUBST(PROJECT_TOPdir)
|
||||
|
||||
AS_IF([test "${with_project_root+set}" = set],
|
||||
[PROJECT_ROOT="${with_project_root}${RTEMS_TOPdir}/\$(top_builddir)"],
|
||||
[PROJECT_ROOT="../../${RTEMS_TOPdir}/\$(top_builddir)"])
|
||||
AC_SUBST(PROJECT_ROOT)
|
||||
|
||||
AC_MSG_CHECKING([for RTEMS Version])
|
||||
AS_IF([test -r "${srcdir}/${RTEMS_TOPdir}/exec/aclocal/version.m4"],
|
||||
[],
|
||||
[AC_MSG_ERROR([Unable to find ${RTEMS_TOPdir}/exec/aclocal/version.m4])])
|
||||
AC_MSG_RESULT([_RTEMS_VERSION])
|
||||
])dnl
|
||||
@@ -1,133 +0,0 @@
|
||||
dnl
|
||||
dnl $Id$
|
||||
dnl
|
||||
dnl Check for System V IPC calls used by Unix simulators
|
||||
dnl
|
||||
dnl 98/07/17 Dario Alcocer alcocer@netcom.com
|
||||
dnl Ralf Corsepius corsepiu@faw.uni-ulm.de
|
||||
dnl
|
||||
dnl Note: $host_os should probably *not* ever be used here to
|
||||
dnl determine if host supports System V IPC calls, since some
|
||||
dnl (e.g. FreeBSD 2.x) are configured by default to include only
|
||||
dnl a subset of the System V IPC calls. Therefore, to make sure
|
||||
dnl all of the required calls are found, test for each call explicitly.
|
||||
dnl
|
||||
dnl All of the calls use IPC_PRIVATE, so tests will not unintentionally
|
||||
dnl modify any existing key sets. See the man pages for semget, shmget,
|
||||
dnl msgget, semctl, shmctl and msgctl for details.
|
||||
|
||||
AC_DEFUN(RTEMS_UNION_SEMUN,
|
||||
[
|
||||
AC_CACHE_CHECK([whether $host defines union semun],
|
||||
rtems_cv_HAS_UNION_SEMUN,
|
||||
[AC_TRY_COMPILE([
|
||||
#include <sys/types.h>
|
||||
#include <sys/ipc.h>
|
||||
#include <sys/sem.h>],
|
||||
[union semun arg ;],
|
||||
[rtems_cv_HAS_UNION_SEMUN="yes"],
|
||||
[rtems_cv_HAS_UNION_SEMUN="no"])
|
||||
])
|
||||
if test "$rtems_cv_HAS_UNION_SEMUN" = "yes"; then
|
||||
AC_DEFINE(HAS_UNION_SEMUN,[1],[if having union semum])
|
||||
fi
|
||||
])
|
||||
|
||||
AC_DEFUN(RTEMS_SYSV_SEM,
|
||||
[AC_REQUIRE([AC_PROG_CC])
|
||||
# AC_REQUIRE([RTEMS_CANONICAL_HOST])
|
||||
AC_CACHE_CHECK(whether $host supports System V semaphores,
|
||||
rtems_cv_sysv_sem,
|
||||
[
|
||||
AC_TRY_RUN(
|
||||
[
|
||||
#include <sys/types.h>
|
||||
#include <sys/ipc.h>
|
||||
#include <sys/sem.h>
|
||||
#if !HAS_UNION_SEMUN
|
||||
union semun {
|
||||
int val;
|
||||
struct semid_ds *buf;
|
||||
ushort *array;
|
||||
} ;
|
||||
#endif
|
||||
int main () {
|
||||
union semun arg ;
|
||||
|
||||
int id=semget(IPC_PRIVATE,1,IPC_CREAT|0400);
|
||||
if (id == -1)
|
||||
exit(1);
|
||||
arg.val = 0; /* avoid implicit type cast to union */
|
||||
if (semctl(id, 0, IPC_RMID, arg) == -1)
|
||||
exit(1);
|
||||
exit(0);
|
||||
}
|
||||
],
|
||||
rtems_cv_sysv_sem="yes", rtems_cv_sysv_sem="no", :)
|
||||
])
|
||||
])
|
||||
|
||||
AC_DEFUN(RTEMS_SYSV_SHM,
|
||||
[AC_REQUIRE([AC_PROG_CC])
|
||||
# AC_REQUIRE([RTEMS_CANONICAL_HOST])
|
||||
AC_CACHE_CHECK(whether $host supports System V shared memory,
|
||||
rtems_cv_sysv_shm,
|
||||
[
|
||||
AC_TRY_RUN([
|
||||
#include <sys/types.h>
|
||||
#include <sys/ipc.h>
|
||||
#include <sys/shm.h>
|
||||
int main () {
|
||||
int id=shmget(IPC_PRIVATE,1,IPC_CREAT|0400);
|
||||
if (id == -1)
|
||||
exit(1);
|
||||
if (shmctl(id, IPC_RMID, 0) == -1)
|
||||
exit(1);
|
||||
exit(0);
|
||||
}
|
||||
],
|
||||
rtems_cv_sysv_shm="yes", rtems_cv_sysv_shm="no", :)
|
||||
])
|
||||
])
|
||||
|
||||
AC_DEFUN(RTEMS_SYSV_MSG,
|
||||
[AC_REQUIRE([AC_PROG_CC])
|
||||
# AC_REQUIRE([RTEMS_CANONICAL_HOST])
|
||||
AC_CACHE_CHECK(whether $host supports System V messages,
|
||||
rtems_cv_sysv_msg,
|
||||
[
|
||||
AC_TRY_RUN([
|
||||
#include <sys/types.h>
|
||||
#include <sys/ipc.h>
|
||||
#include <sys/msg.h>
|
||||
int main () {
|
||||
int id=msgget(IPC_PRIVATE,IPC_CREAT|0400);
|
||||
if (id == -1)
|
||||
exit(1);
|
||||
if (msgctl(id, IPC_RMID, 0) == -1)
|
||||
exit(1);
|
||||
exit(0);
|
||||
}
|
||||
],
|
||||
rtems_cv_sysv_msg="yes", rtems_cv_sysv_msg="no", :)
|
||||
])
|
||||
])
|
||||
|
||||
AC_DEFUN(RTEMS_CHECK_SYSV_UNIX,
|
||||
[# AC_REQUIRE([RTEMS_CANONICAL_HOST])
|
||||
if test "$RTEMS_CPU" = "unix" ; then
|
||||
RTEMS_UNION_SEMUN
|
||||
RTEMS_SYSV_SEM
|
||||
if test "$rtems_cv_sysv_sem" != "yes" ; then
|
||||
AC_MSG_ERROR([System V semaphores don't work, required by simulator])
|
||||
fi
|
||||
RTEMS_SYSV_SHM
|
||||
if test "$rtems_cv_sysv_shm" != "yes" ; then
|
||||
AC_MSG_ERROR([System V shared memory doesn't work, required by simulator])
|
||||
fi
|
||||
RTEMS_SYSV_MSG
|
||||
if test "$rtems_cv_sysv_msg" != "yes" ; then
|
||||
AC_MSG_ERROR([System V messages don't work, required by simulator])
|
||||
fi
|
||||
fi
|
||||
])
|
||||
@@ -1,23 +0,0 @@
|
||||
AC_DEFUN(RTEMS_TOOLPATHS,
|
||||
[
|
||||
# tooldir='$(exec_prefix)/'$target_alias
|
||||
# Temporary work-around until building in source tree is supported
|
||||
AC_REQUIRE([RTEMS_PROJECT_ROOT])
|
||||
|
||||
tooldir='$(PROJECT_ROOT)'
|
||||
AC_SUBST(tooldir)
|
||||
|
||||
project_includedir='$(tooldir)'/include
|
||||
AC_SUBST(project_includedir)
|
||||
|
||||
project_libdir='$(tooldir)/lib$(MULTISUBDIR)'
|
||||
AC_SUBST(project_libdir)
|
||||
|
||||
project_bindir='$(tooldir)/bin'
|
||||
AC_SUBST(project_bindir)
|
||||
|
||||
rtems_bspdir='$(prefix)/${RTEMS_BSP}'
|
||||
AC_SUBST(rtems_bspdir)
|
||||
rtems_makedir='$(prefix)/make'
|
||||
AC_SUBST(rtems_makedir)
|
||||
])
|
||||
@@ -1,2 +0,0 @@
|
||||
AC_DEFUN([RTEMS_VERSIONING],
|
||||
m4_define([_RTEMS_VERSION],[ss-20020528]))
|
||||
@@ -1,209 +0,0 @@
|
||||
##
|
||||
## $Id$
|
||||
##
|
||||
|
||||
## -------------------------------------------------------------------------
|
||||
## NOTE: This file is rather immature and has to be considered to be
|
||||
## almost experimental.
|
||||
##
|
||||
## Expect frequent changes -- It deserves to be cleaned up :(
|
||||
## -------------------------------------------------------------------------
|
||||
|
||||
## The section below is based on make/compilers/gcc-target-default.cfg
|
||||
## used in former versions of RTEMS.
|
||||
|
||||
##
|
||||
## Set up the flags for the toolchains:
|
||||
##
|
||||
## We are considering 3 different building schemes here:
|
||||
## * Using gcc's being able to accept -specs (aka gcc-2.8 building scheme)
|
||||
## * Using gcc's not being able to accept -specs (aka gcc-2.7.2 building
|
||||
## scheme)
|
||||
## * Using third party toolchains (aka non-gcc building scheme)
|
||||
##
|
||||
## Automake conditionals in use:
|
||||
## RTEMS_USE_GCC .. if we are using GCC
|
||||
|
||||
## NOTES:
|
||||
## * The gcc-2.8 building scheme is the nominal building scheme and
|
||||
## is actively supported.
|
||||
## * The non-gcc building scheme requires manually setting up environment
|
||||
## variables and is hardly tested at all
|
||||
|
||||
## CFLAGS_OPTIMIZE_V, CFLAGS_DEBUG_V, CFLAGS_PROFILE_V are the values we
|
||||
## would want the corresponding macros to be set to.
|
||||
##
|
||||
## CFLAGS_OPTIMIZE, CFLAGS_DEBUG, CFLAGS_PROFILE are set by the
|
||||
## 'VARIANT=<OPTIMIZE|DEBUG|PROFILE>' targets to their _V values.
|
||||
|
||||
## XCPPFLAGS, XCFLAGS, XASFLAGS
|
||||
## are used to add flags from the shell
|
||||
## cf. make.info ("Implicit rules/variables" for details)
|
||||
|
||||
if RTEMS_USE_GCC
|
||||
## All the stuff below is specific to gcc
|
||||
|
||||
CFLAGS_DEFAULT=-g -Wall
|
||||
## gcc >= 2.8.x
|
||||
GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
|
||||
else
|
||||
## fall back to the old style compilers/*.cfg
|
||||
## CONFIG.CC is supposed to be provided by <BSP>.cfg
|
||||
include $(CONFIG.CC)
|
||||
endif # RTEMS_USE_GCC
|
||||
|
||||
DEFS = @DEFS@
|
||||
|
||||
CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) \
|
||||
$(DEFINES) $(XCPPFLAGS) $(CPPFLAGS_GCC)
|
||||
CFLAGS = $(CFLAGS_DEFAULT) $(CPU_CFLAGS) $(XCFLAGS)
|
||||
ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
|
||||
|
||||
## FIXME: This doesn't seem to be correct
|
||||
# when debugging, optimize flag: typically empty
|
||||
# some compilers do allow optimization with their "-g"
|
||||
CFLAGS_DEBUG_OPTIMIZE_V=-g
|
||||
LDFLAGS_DEBUG_V =
|
||||
|
||||
# profile flag; use gprof(1)
|
||||
CFLAGS_PROFILE_V=-pg
|
||||
LDFLAGS_PROFILE_V =
|
||||
|
||||
# List of library paths without -L
|
||||
LD_PATHS= $(PROJECT_RELEASE)/lib
|
||||
|
||||
# ld flag for incomplete link
|
||||
LDFLAGS_INCOMPLETE = -r
|
||||
|
||||
# ld flags for profiling, debugging
|
||||
LDFLAGS=$(LDFLAGS_PROFILE) $(LDFLAGS_DEBUG) $(LD_PATHS:%=-L %)
|
||||
|
||||
#
|
||||
# How to compile stuff into ${ARCH} subdirectory
|
||||
#
|
||||
|
||||
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
|
||||
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
CCLD = $(CC)
|
||||
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
|
||||
$(AM_LDFLAGS) $(LDFLAGS) -o $@
|
||||
|
||||
CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
|
||||
|
||||
${ARCH}/%.o: %.c
|
||||
${COMPILE} -o $@ -c $<
|
||||
|
||||
${ARCH}/%.o: %.S
|
||||
${CCASCOMPILE} -o $@ -c $<
|
||||
|
||||
# Make foo.rel from foo.o
|
||||
${ARCH}/%.rel: ${ARCH}/%.o
|
||||
${make-rel}
|
||||
|
||||
# Dependency files for use by gmake
|
||||
# NOTE: we don't put them into $(ARCH)
|
||||
# so that 'make clean' doesn't blow it away
|
||||
|
||||
DEPEND=Depends-${ARCH}
|
||||
|
||||
CLEAN_DEPEND=$(DEPEND).tmp
|
||||
CLOBBER_DEPEND=$(DEPEND)
|
||||
|
||||
# We deliberately don't have anything depend on the
|
||||
# $(DEPEND) file; otherwise it will get rebuilt even
|
||||
# on 'make clean'
|
||||
#
|
||||
|
||||
## HACK: Specific to gcc
|
||||
## FIXME: The approach below is known to be conceptionally broken.
|
||||
depend-am: $(C_FILES) $(CC_FILES) $(S_FILES)
|
||||
## Use gcc -M to generate dependencies
|
||||
## Replace foo.o with $(ARCH)/foo.o
|
||||
## Replace $(ARCH) value with string $(ARCH)
|
||||
## so that it will for debug and profile cases
|
||||
$(COMPILE) -M $^ | \
|
||||
sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
|
||||
-e 's?$(ARCH)/?$$(ARCH)/?' >$(DEPEND).tmp
|
||||
mv $(DEPEND).tmp $(DEPEND)
|
||||
depend: depend-am
|
||||
|
||||
# pull in dependencies if they exist
|
||||
ifeq (${DEPEND},$(wildcard ${DEPEND}))
|
||||
include ${DEPEND}
|
||||
@ENDIF@
|
||||
|
||||
if RTEMS_USE_GCC
|
||||
## gcc >= 2.8
|
||||
define make-rel
|
||||
$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
|
||||
endef
|
||||
else
|
||||
## non-gcc
|
||||
define make-rel
|
||||
$(LINK) $(XLDFLAGS) $^
|
||||
endef
|
||||
endif
|
||||
|
||||
## -------------------------------------------------------------------------
|
||||
|
||||
## translate VARIANT into VARIANT_V
|
||||
VARIANT = OPTIMIZE
|
||||
|
||||
VARIANT_OPTIMIZE_V = OPTIMIZE
|
||||
VARIANT_DEBUG_V = DEBUG
|
||||
VARIANT_PROFILE_V = PROFILE
|
||||
VARIANT_optimize_V = OPTIMIZE
|
||||
VARIANT_debug_V = DEBUG
|
||||
VARIANT_profile_V = PROFILE
|
||||
|
||||
VARIANT_V = $(VARIANT_$(VARIANT)_V)
|
||||
|
||||
## Setup the variant build subdirectory
|
||||
ARCH_OPTIMIZE_V = o-optimize
|
||||
ARCH_DEBUG_V = o-debug
|
||||
ARCH_PROFILE_V = o-profile
|
||||
|
||||
ARCH__V = $(ARCH_OPTIMIZE_V)
|
||||
ARCH = $(ARCH_$(VARIANT_V)_V)
|
||||
|
||||
## Setup the library suffix
|
||||
LIBSUFFIX_OPTIMIZE_V =
|
||||
LIBSUFFIX_DEBUG_V = _g
|
||||
LIBSUFFIX_PROFILE_V = _p
|
||||
LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
|
||||
|
||||
LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
|
||||
LIBSUFFIX_VA = $(LIB_VARIANT).a
|
||||
|
||||
## These are supposed to be set in make/custom/<bsp>.cfg
|
||||
## CFLAGS_OPTIMIZE_V =
|
||||
## CFLAGS_DEBUG_V =
|
||||
## CFLAGS_PROFILE_V =
|
||||
CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
|
||||
|
||||
## ------------------------------------------------------------------------
|
||||
## Setup hard-coded flags
|
||||
if RTEMS_USE_GCC
|
||||
## gcc >= gcc-2.8
|
||||
RTEMS_CFLAGS_OPTIMIZE_V =
|
||||
RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
|
||||
RTEMS_CFLAGS_PROFILE_V =
|
||||
|
||||
## non-gcc
|
||||
## We can't guess what flags might be required here.
|
||||
## Pass the values from the environment if you want to apply them.
|
||||
endif
|
||||
RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
|
||||
|
||||
## -------------------------------------------------------------------------
|
||||
|
||||
CC = @CC@ $(GCCSPECS)
|
||||
CPP = @CPP@ $(GCCSPECS)
|
||||
|
||||
##
|
||||
AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
|
||||
|
||||
AM_CFLAGS = $(RTEMS_CFLAGS_$(VARIANT_V)_V) $(CFLAGS_$(VARIANT_V)_V)
|
||||
|
||||
# AM_CFLAGS = $(RTEMS_BSP_CFLAGS) $(RTEMS_CFLAGS)
|
||||
AM_CCASFLAGS = $(RTEMS_BSP_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_ASFLAGS)
|
||||
@@ -1,22 +0,0 @@
|
||||
##
|
||||
## $Id$
|
||||
##
|
||||
|
||||
## LD = @LD@
|
||||
AR = @AR@
|
||||
RANLIB = @RANLIB@
|
||||
|
||||
ARFLAGS = ruv
|
||||
|
||||
define make-library
|
||||
$(RM) $@
|
||||
$(AR) $(ARFLAGS) $@ $^
|
||||
$(RANLIB) $@
|
||||
endef
|
||||
|
||||
$(PROJECT_RELEASE)/lib$(MULTISUBDIR):
|
||||
@$(mkinstalldirs) $@
|
||||
|
||||
TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib$(MULTISUBDIR)
|
||||
|
||||
.PRECIOUS: $(LIB)
|
||||
@@ -1,38 +0,0 @@
|
||||
## $Id$
|
||||
|
||||
debug:
|
||||
@echo
|
||||
@echo "\"make debug\" is obsolete, instead use:"
|
||||
@echo " make VARIANT=DEBUG"
|
||||
@echo
|
||||
|
||||
.PHONY: debug
|
||||
|
||||
profile:
|
||||
@echo
|
||||
@echo "\"make profile\" is obsolete, instead use:"
|
||||
@echo " make VARIANT=PROFILE"
|
||||
@echo
|
||||
|
||||
.PHONY: profile
|
||||
|
||||
preinstall-am: $(PREINSTALL_FILES)
|
||||
preinstall: preinstall-am
|
||||
.PHONY: preinstall preinstall-am
|
||||
|
||||
depend-am:
|
||||
depend: depend-am
|
||||
.PHONY: depend depend-am
|
||||
|
||||
${ARCH}:
|
||||
mkdir ${ARCH}
|
||||
|
||||
clean-local:
|
||||
$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
|
||||
$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
|
||||
|
||||
distclean-local:
|
||||
$(RM) Depends-o-optimize Depends-o-debug Depends-o-profile
|
||||
|
||||
PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
|
||||
|
||||
@@ -1,38 +0,0 @@
|
||||
## $Id$
|
||||
|
||||
if MULTILIB
|
||||
MULTISRCTOP =
|
||||
MULTIDIRS =
|
||||
MULTIDO = true
|
||||
MULTICLEAN = true
|
||||
endif
|
||||
|
||||
# Multilib support rules
|
||||
.PHONY: all-multi install-multi mostlyclean-multi clean-multi distclean-multi \
|
||||
maintainer-clean-multi
|
||||
|
||||
if MULTILIB
|
||||
all-recursive: all-multi
|
||||
install-recursive: install-multi
|
||||
|
||||
mostlyclean-recursive: mostlyclean-multi
|
||||
clean-recursive: clean-multi
|
||||
distclean-recursive: distclean-multi
|
||||
maintainer-clean-recursive: maintainer-clean-multi
|
||||
|
||||
all-multi:
|
||||
$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do
|
||||
install-multi:
|
||||
$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do
|
||||
|
||||
mostlyclean-multi:
|
||||
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean
|
||||
clean-multi:
|
||||
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean
|
||||
distclean-multi:
|
||||
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean
|
||||
maintainer-clean-multi:
|
||||
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean
|
||||
else
|
||||
include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
|
||||
endif
|
||||
@@ -1,36 +0,0 @@
|
||||
## $Id$
|
||||
|
||||
## Borrowed from automake-1.4 and adapted to RTEMS
|
||||
|
||||
## NOTE: This is a temporary work-around to keep
|
||||
## RTEMS's non automake standard make targets working.
|
||||
## Once automake is fully integrated these make targets
|
||||
## and this file will probably be removed
|
||||
|
||||
depend-recursive \
|
||||
preinstall-recursive:
|
||||
@set fnord $(MAKEFLAGS); amf=$$2; \
|
||||
dot_seen=no; \
|
||||
target=`echo $@ | sed s/-recursive//`; \
|
||||
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
echo "Making $$target in $$subdir"; \
|
||||
if test "$$subdir" = "."; then \
|
||||
dot_seen=yes; \
|
||||
local_target="$$target-am"; \
|
||||
else \
|
||||
local_target="$$target"; \
|
||||
fi; \
|
||||
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
||||
## This trick allows "-k" to keep its natural meaning when running a
|
||||
## recursive rule.
|
||||
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
|
||||
done; \
|
||||
if test "$$dot_seen" = "no"; then \
|
||||
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
|
||||
fi; test -z "$$fail"
|
||||
|
||||
preinstall: preinstall-recursive
|
||||
.PHONY: preinstall-recursive
|
||||
|
||||
depend: depend-recursive
|
||||
.PHONY: depend-recursive
|
||||
Reference in New Issue
Block a user