riscv: add freedom E310 Arty A7 bsp

Added support for Sifive Freedom FE310 soc on Arty A7 FPGA board.
Update #3785.

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>

bsps/include/bsp/fatal.h

@@ -152,7 +152,8 @@ typedef enum {
   RISCV_FATAL_INVALID_PLIC_NDEV_IN_DEVICE_TREE,
   RISCV_FATAL_TOO_LARGE_PLIC_NDEV_IN_DEVICE_TREE,
   RISCV_FATAL_INVALID_INTERRUPT_AFFINITY,
-  RISCV_FATAL_NO_NS16550_INTERRUPTS_IN_DEVICE_TREE
+  RISCV_FATAL_NO_NS16550_INTERRUPTS_IN_DEVICE_TREE,
+  RISCV_FATAL_NO_TLCLOCK_FREQUENCY_IN_DEVICE_TREE
 } bsp_fatal_code;
 
 RTEMS_NO_RETURN static inline void

bsps/riscv/riscv/clock/clockdrv.c

@@ -130,15 +130,21 @@ static uint32_t riscv_clock_get_timecount(struct timecounter *base)
 static uint32_t riscv_clock_get_timebase_frequency(const void *fdt)
 {
   int node;
-  const uint32_t *val;
-  int len;
+  const fdt32_t *val;
+  int len=0;
 
   node = fdt_path_offset(fdt, "/cpus");
-  val = fdt_getprop(fdt, node, "timebase-frequency", &len);
-  if (val == NULL || len < 4) {
-    bsp_fatal(RISCV_FATAL_NO_TIMEBASE_FREQUENCY_IN_DEVICE_TREE);
-  }
 
+  val = (fdt32_t *) fdt_getprop(fdt, node, "timebase-frequency", &len);
+
+  if (val == NULL || len < 4) {
+    int cpu0 = fdt_subnode_offset(fdt, node, "cpu@0");
+    val = (fdt32_t *) fdt_getprop(fdt, cpu0, "timebase-frequency", &len);
+
+    if (val == NULL || len < 4) {
+      bsp_fatal(RISCV_FATAL_NO_TIMEBASE_FREQUENCY_IN_DEVICE_TREE);
+    }
+  }
   return fdt32_to_cpu(*val);
 }
 

bsps/riscv/riscv/config/frdme310arty.cfg

@@ -0,0 +1,9 @@
+include $(RTEMS_ROOT)/make/custom/default.cfg
+
+RTEMS_CPU = riscv
+
+CPU_CFLAGS = -march=rv32imac -mabi=ilp32
+
+LDFLAGS = -Wl,--gc-sections
+
+CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections

bsps/riscv/riscv/console/console-config.c

@@ -28,6 +28,11 @@
 #include <libfdt.h>
 #include <string.h>
 
+#if RISCV_ENABLE_FRDME310ARTY_SUPPORT != 0
+#include <bsp/fe310-uart.h>
+fe310_uart_context driver_context;
+#endif
+
 #if RISCV_ENABLE_HTIF_SUPPORT != 0
 static htif_console_context htif_console_instance;
 #endif
@@ -59,7 +64,18 @@ static int riscv_get_console_node(const void *fdt)
     stdout_path = "";
   }
 
+#if RISCV_ENABLE_FRDME310ARTY_SUPPORT != 0
+  int root;
+  int soc;
+  root = fdt_path_offset(fdt, "/");
+  soc = fdt_subnode_offset(fdt, root, "soc");
+
+  int offset=fdt_subnode_offset(fdt, soc,stdout_path);
+
+  return offset;
+#else
   return fdt_path_offset(fdt, stdout_path);
+#endif
 }
 
 #if RISCV_CONSOLE_MAX_NS16550_DEVICES > 0
@@ -193,6 +209,27 @@ static void riscv_console_probe(void)
     }
 #endif
 
+#if RISCV_ENABLE_FRDME310ARTY_SUPPORT != 0
+    if (RISCV_CONSOLE_IS_COMPATIBLE(compat, compat_len, "sifive,uart0")) {
+      fe310_uart_context *ctx ;
+
+      ctx=&driver_context;
+      ctx->regs = (uintptr_t) riscv_fdt_get_address(fdt, node);
+      if (ctx->regs == 0)
+      {
+        bsp_fatal(RISCV_FATAL_NO_NS16550_REG_IN_DEVICE_TREE);
+      }
+
+      if (node == console_node) {
+        riscv_console.context = &ctx->base;
+        riscv_console.putchar = fe310_console_putchar;
+        riscv_console.getchar = fe310_uart_read;
+      }
+
+      rtems_termios_device_context_initialize(&ctx->base, "FE310UART");
+    }
+#endif
+
     node = fdt_next_node(fdt, node, NULL);
   }
 
@@ -224,6 +261,10 @@ rtems_status_code console_initialize(
   size_t i;
 #endif
 
+#if RISCV_ENABLE_FRDME310ARTY_SUPPORT != 0
+  char path[] = "/dev/ttyS0";
+#endif
+
   rtems_termios_initialize();
 
 #if RISCV_ENABLE_HTIF_SUPPORT != 0
@@ -255,6 +296,22 @@ rtems_status_code console_initialize(
   }
 #endif
 
+#if RISCV_ENABLE_FRDME310ARTY_SUPPORT != 0
+  fe310_uart_context * ctx = &driver_context;
+
+  rtems_termios_device_install(
+    path,
+    &fe310_uart_handler,
+    NULL,
+    &ctx->base
+  );
+
+  if (&ctx->base == riscv_console.context) {
+    link(path, CONSOLE_DEVICE_NAME);
+  }
+
+#endif
+
   return RTEMS_SUCCESSFUL;
 }
 

bsps/riscv/riscv/console/fe310-uart.c

@@ -0,0 +1,118 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (c) 2019 Pragnesh Patel <pragnesh.patel@sifive.com>
+ * Copyright (c) 2019 Sachin Ghadi <sachin.ghadi@sifive.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <bsp/riscv.h>
+#include <bsp/fe310-uart.h>
+
+#include <assert.h>
+
+static void irq_handler(void *arg)
+{
+	/*TODO*/
+}
+
+int fe310_uart_read(rtems_termios_device_context *base)
+{
+	fe310_uart_context * ctx = (fe310_uart_context*) base;
+	  size_t i;
+
+	  if (((ctx->regs->rxdata) & TXRXREADY) != 0) {
+	    return -1;
+	  } else {
+	    return ctx->regs->rxdata;
+	}
+}
+
+static ssize_t fe310_uart_write (
+  rtems_termios_device_context  *base,
+  const char                    *buf,
+  size_t                        n
+)
+{
+  fe310_uart_context * ctx = (fe310_uart_context*) base;
+  size_t i;
+
+  rtems_status_code sc;
+
+  (ctx->regs)->div = riscv_get_core_frequency()/ 115200 - 1;
+  (ctx->regs)->txctrl |= 1;
+  (ctx->regs)->rxctrl |= 1;
+
+  for (i = 0; i < n; ++i) {
+    while (((ctx->regs->txdata) & TXRXREADY) != 0) {
+        ;
+    }
+    ctx->regs->txdata = buf[i];
+  }
+  return n;
+}
+
+void fe310_console_putchar(rtems_termios_device_context * context,char c)
+{
+	fe310_uart_write ( context, &c,1);
+}
+
+void console_context_init(
+  rtems_termios_device_context *base,
+  int device_tree_node
+)
+{
+	/*TODO*/
+}
+
+static bool fe310_uart_first_open (
+  rtems_termios_tty             *tty,
+  rtems_termios_device_context  *base,
+  struct termios                *term,
+  rtems_libio_open_close_args_t *args
+)
+{
+  fe310_uart_context * ctx;
+  rtems_status_code sc;
+
+  /* Configure GPIO to be UART */
+
+  sc = rtems_termios_set_initial_baud (tty, B115200);
+  if ( sc != RTEMS_SUCCESSFUL ) {
+    return false;
+  }
+
+  /* Set up a baud rate and enable tx and rx */
+  ctx = (fe310_uart_context *) base;
+  (ctx->regs)->div = riscv_get_core_frequency()/ 115200 - 1;
+  (ctx->regs)->txctrl |= 1;
+  (ctx->regs)->rxctrl |= 1;
+  return true;
+};
+
+const rtems_termios_device_handler fe310_uart_handler = {
+  .first_open = fe310_uart_first_open,
+  .write = fe310_uart_write,
+  .poll_read = fe310_uart_read,
+  .mode = TERMIOS_POLLED
+};

bsps/riscv/riscv/include/bsp/fe310-uart.h

@@ -0,0 +1,61 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (C) 2019 Pragnesh Patel <pragnesh.patel@sifive.com>
+ * Copyright (c) 2019 Sachin Ghadi <sachin.ghadi@sifive.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef FE310_UART_H
+#define FE310_UART_H
+
+#define TXRXREADY (1 << 31)
+
+#include <rtems/termiostypes.h>
+#include <rtems/irq.h>
+
+typedef struct {
+  uint32_t txdata;
+  uint32_t rxdata;
+  uint32_t txctrl;
+  uint32_t rxctrl;
+  uint32_t ie;
+  uint32_t ip;
+  uint32_t div;
+} fe310_uart_t;
+
+/* Low-level driver specific data structure */
+typedef struct {
+  rtems_termios_device_context base;
+  const char *device_name;
+  volatile fe310_uart_t *regs;
+} fe310_uart_context;
+
+int fe310_uart_read(rtems_termios_device_context *base);
+void fe310_console_putchar(rtems_termios_device_context * context,char c);
+
+extern const rtems_termios_device_handler fe310_uart_handler;
+
+extern fe310_uart_context driver_context;
+
+#endif /* FE310_UART_H */

bsps/riscv/riscv/include/bsp/riscv.h

@@ -38,6 +38,10 @@ extern volatile RISCV_CLINT_regs *riscv_clint;
 
 void *riscv_fdt_get_address(const void *fdt, int node);
 
+#if RISCV_ENABLE_FRDME310ARTY_SUPPORT != 0
+uint32_t riscv_get_core_frequency(void);
+#endif
+
 #ifdef RTEMS_SMP
 extern uint32_t riscv_hart_count;
 #else

bsps/riscv/riscv/start/bspstart.c

@@ -30,6 +30,11 @@
 #include <bsp/riscv.h>
 
 #include <libfdt.h>
+#include <string.h>
+
+#if RISCV_ENABLE_FRDME310ARTY_SUPPORT != 0
+unsigned int riscv_core_freq;
+#endif
 
 void *riscv_fdt_get_address(const void *fdt, int node)
 {
@@ -161,8 +166,55 @@ uint32_t riscv_get_hart_index_by_phandle(uint32_t phandle)
   return UINT32_MAX;
 }
 
+#if RISCV_ENABLE_FRDME310ARTY_SUPPORT != 0
+static uint32_t get_core_frequency(void)
+{
+	uint32_t node;
+	const char *fdt=bsp_fdt_get();
+
+  char *tlclk;
+	uint32_t len;
+
+  do
+  {
+    node=fdt_node_offset_by_compatible(fdt, -1,"fixed-clock");
+    uint32_t *val=NULL;
+    if (node>0)
+    {
+      tlclk = fdt_getprop(fdt, node, "clock-output-names", &len);
+
+      if (strcmp(tlclk,"tlclk") == 0)
+      {
+        val = fdt_getprop(fdt, node, "clock-frequency", &len);
+		    if(val !=NULL)
+		    {
+			    riscv_core_freq=fdt32_to_cpu(*val);
+          break;
+		    }
+      }
+	  }else
+    {
+      bsp_fatal(RISCV_FATAL_NO_TLCLOCK_FREQUENCY_IN_DEVICE_TREE);
+    }
+
+  } while (node > 0);
+
+	return riscv_core_freq;
+}
+
+inline uint32_t riscv_get_core_frequency(void)
+{
+	return riscv_core_freq;
+}
+#endif
+
 void bsp_start(void)
 {
   riscv_find_harts();
   bsp_interrupt_initialize();
+
+#if RISCV_ENABLE_FRDME310ARTY_SUPPORT != 0
+	riscv_core_freq=get_core_frequency();
+#endif
+
 }

c/src/lib/libbsp/riscv/riscv/Makefile.am

@@ -46,7 +46,11 @@ librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/start/bspgetworkarea-defa
 librtemsbsp_a_SOURCES +=../../../../../../bsps/riscv/riscv/clock/clockdrv.c
 
 # Timer
+#if RISCV_ENABLE_FRDME310ARTY_SUPPORT != 0
+librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/btimer/btimer-cpucounter.c
+#else
 librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/btimer/btimer-stub.c
+#endif
 
 # IRQ
 librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/irq/irq-default-handler.c
@@ -60,6 +64,10 @@ librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/serial/console-termio
 librtemsbsp_a_SOURCES += ../../../../../../bsps/riscv/riscv/console/console-config.c
 librtemsbsp_a_SOURCES += ../../../../../../bsps/riscv/riscv/console/htif.c
 
+#if RISCV_ENABLE_FRDME310ARTY_SUPPORT != 0
+librtemsbsp_a_SOURCES += ../../../../../../bsps/riscv/riscv/console/fe310-uart.c
+#endif
+
 if HAS_SMP
 librtemsbsp_a_SOURCES += ../../../../../../bsps/riscv/riscv/start/bspsmp.c
 endif

c/src/lib/libbsp/riscv/riscv/configure.ac

@@ -36,9 +36,14 @@ RTEMS_BSPOPTS_HELP([RISCV_MAXIMUM_EXTERNAL_INTERRUPTS],[maximum number of extern
 RTEMS_BSPOPTS_SET([RISCV_ENABLE_HTIF_SUPPORT],[*],[])
 RTEMS_BSPOPTS_HELP([RISCV_ENABLE_HTIF_SUPPORT],[enables the HTIF support if defined to a non-zero value, otherwise it is disabled (disabled by default)])
 
+RTEMS_BSPOPTS_SET([RISCV_CONSOLE_MAX_NS16550_DEVICES],[frdme310arty*],[])
 RTEMS_BSPOPTS_SET([RISCV_CONSOLE_MAX_NS16550_DEVICES],[*],[2])
 RTEMS_BSPOPTS_HELP([RISCV_CONSOLE_MAX_NS16550_DEVICES],[maximum number of NS16550 devices supported by the console driver (2 by default)])
 
+RTEMS_BSPOPTS_SET([RISCV_ENABLE_FRDME310ARTY_SUPPORT],[frdme310arty*],[1])
+RTEMS_BSPOPTS_SET([RISCV_ENABLE_FRDME310ARTY_SUPPORT],[*],[])
+RTEMS_BSPOPTS_HELP([RISCV_ENABLE_FRDME310ARTY_SUPPORT],[enables support sifive Freedom E310 Arty board if defined to a non-zero value,otherwise it is disabled (disabled by default)])
+
 RTEMS_BSP_CLEANUP_OPTIONS
 
 case "${RTEMS_BSP}" in
@@ -53,13 +58,22 @@ case "${RTEMS_BSP}" in
     ;;
 esac
 
+case "${RTEMS_BSP}" in
+  frdm*310arty)
+    RISCV_RAM_REGION_SIZE_DEFAULT=0x10000000
+    ;;
+  *)
+    RISCV_RAM_REGION_SIZE_DEFAULT=0x04000000
+    ;;
+esac
+
 AC_DEFUN([RISCV_LINKCMD],[
 AC_ARG_VAR([$1],[$2])dnl
 [$1]=[$]{[$1]:-[$3]}
 ])
 
 RISCV_LINKCMD([RISCV_RAM_REGION_BEGIN],[begin of the RAM region for linker command file (default is 0x70000000 for 64-bit with -mcmodel=medlow and 0x80000000 for all other)],[${RISCV_RAM_REGION_BEGIN_DEFAULT}])
-RISCV_LINKCMD([RISCV_RAM_REGION_SIZE],[size of the RAM region for linker command file (default 64MiB)],[0x04000000])
+RISCV_LINKCMD([RISCV_RAM_REGION_SIZE],[size of the RAM region for linker command file (default is 256 MiB for frdme310arty and 64 MiB for all other)],[${RISCV_RAM_REGION_SIZE_DEFAULT}])
 
 AC_CONFIG_FILES([
 Makefile