forked from Imagelibrary/rtems
Copied over from the automake/
This commit is contained in:
Ralf Corsepius
256
c/src/exec/automake/compile.am
Normal file
256
c/src/exec/automake/compile.am
Normal file
@@ -0,0 +1,256 @@
|
|||||||
|
##
|
||||||
|
## $Id$
|
||||||
|
##
|
||||||
|
|
||||||
|
## -------------------------------------------------------------------------
|
||||||
|
## NOTE: This file is rather immature and has to be considered to be
|
||||||
|
## almost experimental.
|
||||||
|
##
|
||||||
|
## Expect frequent changes -- It deserves to be cleaned up :(
|
||||||
|
## -------------------------------------------------------------------------
|
||||||
|
|
||||||
|
## The section below is based on make/compilers/gcc-target-default.cfg
|
||||||
|
## used in former versions of RTEMS.
|
||||||
|
|
||||||
|
##
|
||||||
|
## Set up the flags for the toolchains:
|
||||||
|
##
|
||||||
|
## We are considering 3 different building schemes here:
|
||||||
|
## * Using gcc's being able to accept -specs (aka gcc-2.8 building scheme)
|
||||||
|
## * Using gcc's not being able to accept -specs (aka gcc-2.7.2 building
|
||||||
|
## scheme)
|
||||||
|
## * Using third party toolchains (aka non-gcc building scheme)
|
||||||
|
##
|
||||||
|
## Automake conditionals in use:
|
||||||
|
## RTEMS_USE_GCC .. if we are using GCC
|
||||||
|
|
||||||
|
## NOTES:
|
||||||
|
## * The gcc-2.8 building scheme is the nominal building scheme and
|
||||||
|
## is actively supported.
|
||||||
|
## * The non-gcc building scheme requires manually setting up environment
|
||||||
|
## variables and is hardly tested at all
|
||||||
|
|
||||||
|
## CFLAGS_OPTIMIZE_V, CFLAGS_DEBUG_V, CFLAGS_PROFILE_V are the values we
|
||||||
|
## would want the corresponding macros to be set to.
|
||||||
|
##
|
||||||
|
## CFLAGS_OPTIMIZE, CFLAGS_DEBUG, CFLAGS_PROFILE are set by the
|
||||||
|
## 'VARIANT=<OPTIMIZE|DEBUG|PROFILE>' targets to their _V values.
|
||||||
|
|
||||||
|
## XCPPFLAGS, XCFLAGS, XCXXFLAGS, XASFLAGS
|
||||||
|
## are used to add flags from the shell
|
||||||
|
## cf. make.info ("Implicit rules/variables" for details)
|
||||||
|
|
||||||
|
if RTEMS_USE_GCC
|
||||||
|
## All the stuff below is specific to gcc
|
||||||
|
|
||||||
|
CFLAGS_DEFAULT=-g -Wall
|
||||||
|
## gcc >= 2.8.x
|
||||||
|
GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
|
||||||
|
else
|
||||||
|
## fall back to the old style compilers/*.cfg
|
||||||
|
## CONFIG.CC is supposed to be provided by <BSP>.cfg
|
||||||
|
include $(CONFIG.CC)
|
||||||
|
endif # RTEMS_USE_GCC
|
||||||
|
|
||||||
|
DEFS = @DEFS@
|
||||||
|
|
||||||
|
CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) \
|
||||||
|
$(DEFINES) $(XCPPFLAGS) $(CPPFLAGS_GCC)
|
||||||
|
CFLAGS = $(CFLAGS_DEFAULT) $(CPU_CFLAGS) $(XCFLAGS)
|
||||||
|
CXXFLAGS = $(CFLAGS_DEFAULT) $(CPU_CFLAGS) $(XCXXFLAGS)
|
||||||
|
ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
|
||||||
|
|
||||||
|
LINK_LIBS = $(LD_LIBS)
|
||||||
|
|
||||||
|
## FIXME: This doesn't seem to be correct
|
||||||
|
# when debugging, optimize flag: typically empty
|
||||||
|
# some compilers do allow optimization with their "-g"
|
||||||
|
CFLAGS_DEBUG_OPTIMIZE_V=-g
|
||||||
|
CXXFLAGS_DEBUG_OPTIMIZE_V=-g
|
||||||
|
LDFLAGS_DEBUG_V =
|
||||||
|
|
||||||
|
# profile flag; use gprof(1)
|
||||||
|
CFLAGS_PROFILE_V=-pg
|
||||||
|
CXXFLAGS_PROFILE_V=-pg
|
||||||
|
LDFLAGS_PROFILE_V =
|
||||||
|
|
||||||
|
# List of library paths without -L
|
||||||
|
LD_PATHS= $(PROJECT_RELEASE)/lib
|
||||||
|
|
||||||
|
# ld flag for incomplete link
|
||||||
|
LDFLAGS_INCOMPLETE = -r
|
||||||
|
|
||||||
|
# ld flags for profiling, debugging
|
||||||
|
LDFLAGS=$(LDFLAGS_PROFILE) $(LDFLAGS_DEBUG) $(LD_PATHS:%=-L %)
|
||||||
|
|
||||||
|
#
|
||||||
|
# Client compiler and support tools
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# How to compile stuff into ${ARCH} subdirectory
|
||||||
|
#
|
||||||
|
|
||||||
|
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
|
||||||
|
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||||
|
CCLD = $(CC)
|
||||||
|
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
|
||||||
|
$(AM_LDFLAGS) $(LDFLAGS) -o $@
|
||||||
|
|
||||||
|
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
|
||||||
|
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
|
||||||
|
CXXLD = $(CXX)
|
||||||
|
CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
|
||||||
|
$(AM_LDFLAGS) $(LDFLAGS) -o $@
|
||||||
|
|
||||||
|
AS = $(CC)
|
||||||
|
ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
|
||||||
|
|
||||||
|
${ARCH}/%.o: %.c
|
||||||
|
${COMPILE} -o $@ -c $<
|
||||||
|
|
||||||
|
${ARCH}/%.o: %.cc
|
||||||
|
${CXXCOMPILE} -o $@ -c $<
|
||||||
|
|
||||||
|
${ARCH}/%.o: %.cpp
|
||||||
|
${CXXCOMPILE} -o $@ -c $<
|
||||||
|
|
||||||
|
${ARCH}/%.o: %.cxx
|
||||||
|
${CXXCOMPILE} -o $@ -c $<
|
||||||
|
|
||||||
|
${ARCH}/%.o: %.C
|
||||||
|
${CXXCOMPILE} -o $@ -c $<
|
||||||
|
|
||||||
|
${ARCH}/%.o: %.S
|
||||||
|
${ASCOMPILE} -DASM -o $@ -c $<
|
||||||
|
|
||||||
|
# Make foo.rel from foo.o
|
||||||
|
${ARCH}/%.rel: ${ARCH}/%.o
|
||||||
|
${make-rel}
|
||||||
|
|
||||||
|
# Dependency files for use by gmake
|
||||||
|
# NOTE: we don't put them into $(ARCH)
|
||||||
|
# so that 'make clean' doesn't blow it away
|
||||||
|
|
||||||
|
DEPEND=Depends-${ARCH}
|
||||||
|
|
||||||
|
CLEAN_DEPEND=$(DEPEND).tmp
|
||||||
|
CLOBBER_DEPEND=$(DEPEND)
|
||||||
|
|
||||||
|
# We deliberately don't have anything depend on the
|
||||||
|
# $(DEPEND) file; otherwise it will get rebuilt even
|
||||||
|
# on 'make clean'
|
||||||
|
#
|
||||||
|
|
||||||
|
## HACK: Specific to gcc
|
||||||
|
## FIXME: The approach below is known to be conceptionally broken.
|
||||||
|
depend-am: $(C_FILES) $(CC_FILES) $(S_FILES)
|
||||||
|
## Use gcc -M to generate dependencies
|
||||||
|
## Replace foo.o with $(ARCH)/foo.o
|
||||||
|
## Replace $(ARCH) value with string $(ARCH)
|
||||||
|
## so that it will for debug and profile cases
|
||||||
|
$(COMPILE) -M $^ | \
|
||||||
|
sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
|
||||||
|
-e 's?$(ARCH)/?$$(ARCH)/?' >$(DEPEND).tmp
|
||||||
|
mv $(DEPEND).tmp $(DEPEND)
|
||||||
|
depend: depend-am
|
||||||
|
|
||||||
|
# pull in dependencies if they exist
|
||||||
|
ifeq (${DEPEND},$(wildcard ${DEPEND}))
|
||||||
|
include ${DEPEND}
|
||||||
|
@ENDIF@
|
||||||
|
|
||||||
|
|
||||||
|
# spell out all the LINK_FILE's, rather than using -lbsp, so
|
||||||
|
# that $(LINK_FILES) can be a dependency
|
||||||
|
|
||||||
|
LINK_OBJS = \
|
||||||
|
$(OBJS) \
|
||||||
|
$(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
|
||||||
|
|
||||||
|
LINK_FILES =\
|
||||||
|
$(START_FILE) \
|
||||||
|
$(OBJS) \
|
||||||
|
$(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
|
||||||
|
|
||||||
|
if RTEMS_USE_GCC
|
||||||
|
## gcc >= 2.8
|
||||||
|
define make-rel
|
||||||
|
$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
|
||||||
|
endef
|
||||||
|
else
|
||||||
|
## non-gcc
|
||||||
|
define make-rel
|
||||||
|
$(LINK) $(XLDFLAGS) $^
|
||||||
|
endef
|
||||||
|
endif
|
||||||
|
|
||||||
|
## -------------------------------------------------------------------------
|
||||||
|
|
||||||
|
## translate VARIANT into VARIANT_V
|
||||||
|
VARIANT = OPTIMIZE
|
||||||
|
|
||||||
|
VARIANT_OPTIMIZE_V = OPTIMIZE
|
||||||
|
VARIANT_DEBUG_V = DEBUG
|
||||||
|
VARIANT_PROFILE_V = PROFILE
|
||||||
|
VARIANT_optimize_V = OPTIMIZE
|
||||||
|
VARIANT_debug_V = DEBUG
|
||||||
|
VARIANT_profile_V = PROFILE
|
||||||
|
|
||||||
|
VARIANT_V = $(VARIANT_$(VARIANT)_V)
|
||||||
|
|
||||||
|
## Setup the variant build subdirectory
|
||||||
|
ARCH_OPTIMIZE_V = o-optimize
|
||||||
|
ARCH_DEBUG_V = o-debug
|
||||||
|
ARCH_PROFILE_V = o-profile
|
||||||
|
|
||||||
|
ARCH__V = $(ARCH_OPTIMIZE_V)
|
||||||
|
ARCH = $(ARCH_$(VARIANT_V)_V)
|
||||||
|
|
||||||
|
## Setup the library suffix
|
||||||
|
LIBSUFFIX_OPTIMIZE_V =
|
||||||
|
LIBSUFFIX_DEBUG_V = _g
|
||||||
|
LIBSUFFIX_PROFILE_V = _p
|
||||||
|
LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
|
||||||
|
|
||||||
|
LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
|
||||||
|
LIBSUFFIX_VA = $(LIB_VARIANT).a
|
||||||
|
|
||||||
|
## These are supposed to be set in make/custom/<bsp>.cfg
|
||||||
|
## CFLAGS_OPTIMIZE_V =
|
||||||
|
## CFLAGS_DEBUG_V =
|
||||||
|
## CFLAGS_PROFILE_V =
|
||||||
|
CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
|
||||||
|
|
||||||
|
## ------------------------------------------------------------------------
|
||||||
|
## Setup hard-coded flags
|
||||||
|
if RTEMS_USE_GCC
|
||||||
|
## gcc >= gcc-2.8
|
||||||
|
RTEMS_CFLAGS_OPTIMIZE_V =
|
||||||
|
RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
|
||||||
|
RTEMS_CFLAGS_PROFILE_V =
|
||||||
|
|
||||||
|
## non-gcc
|
||||||
|
## We can't guess what flags might be required here.
|
||||||
|
## Pass the values from the environment if you want to apply them.
|
||||||
|
endif
|
||||||
|
RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
|
||||||
|
|
||||||
|
## -------------------------------------------------------------------------
|
||||||
|
|
||||||
|
CC = @CC@ $(GCCSPECS)
|
||||||
|
CXX = @CXX@ $(GCCSPECS)
|
||||||
|
CPP = @CPP@ $(GCCSPECS)
|
||||||
|
|
||||||
|
LD = @LD@
|
||||||
|
OBJCOPY = @OBJCOPY@
|
||||||
|
NM = @NM@
|
||||||
|
SIZE = @SIZE@
|
||||||
|
STRIP = @STRIP@
|
||||||
|
|
||||||
|
|
||||||
|
##
|
||||||
|
AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
|
||||||
|
|
||||||
|
AM_CFLAGS = $(RTEMS_CFLAGS_$(VARIANT_V)_V) $(CFLAGS_$(VARIANT_V)_V)
|
||||||
|
AM_CXXFLAGS = $(RTEMS_CFLAGS_$(VARIANT_V)_V) $(CFLAGS_$(VARIANT_V)_V)
|
||||||
22
c/src/exec/automake/lib.am
Normal file
22
c/src/exec/automake/lib.am
Normal file
@@ -0,0 +1,22 @@
|
|||||||
|
##
|
||||||
|
## $Id$
|
||||||
|
##
|
||||||
|
|
||||||
|
## LD = @LD@
|
||||||
|
AR = @AR@
|
||||||
|
RANLIB = @RANLIB@
|
||||||
|
|
||||||
|
ARFLAGS = ruv
|
||||||
|
|
||||||
|
define make-library
|
||||||
|
$(RM) $@
|
||||||
|
$(AR) $(ARFLAGS) $@ $^
|
||||||
|
$(RANLIB) $@
|
||||||
|
endef
|
||||||
|
|
||||||
|
$(PROJECT_RELEASE)/lib$(MULTISUBDIR):
|
||||||
|
@$(mkinstalldirs) $@
|
||||||
|
|
||||||
|
TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib$(MULTISUBDIR)
|
||||||
|
|
||||||
|
.PRECIOUS: $(LIB)
|
||||||
38
c/src/exec/automake/local.am
Normal file
38
c/src/exec/automake/local.am
Normal file
@@ -0,0 +1,38 @@
|
|||||||
|
## $Id$
|
||||||
|
|
||||||
|
debug:
|
||||||
|
@echo
|
||||||
|
@echo "\"make debug\" is obsolete, instead use:"
|
||||||
|
@echo " make VARIANT=DEBUG"
|
||||||
|
@echo
|
||||||
|
|
||||||
|
.PHONY: debug
|
||||||
|
|
||||||
|
profile:
|
||||||
|
@echo
|
||||||
|
@echo "\"make profile\" is obsolete, instead use:"
|
||||||
|
@echo " make VARIANT=PROFILE"
|
||||||
|
@echo
|
||||||
|
|
||||||
|
.PHONY: profile
|
||||||
|
|
||||||
|
preinstall-am: $(PREINSTALL_FILES)
|
||||||
|
preinstall: preinstall-am
|
||||||
|
.PHONY: preinstall preinstall-am
|
||||||
|
|
||||||
|
depend-am:
|
||||||
|
depend: depend-am
|
||||||
|
.PHONY: depend depend-am
|
||||||
|
|
||||||
|
${ARCH}:
|
||||||
|
mkdir ${ARCH}
|
||||||
|
|
||||||
|
clean-local:
|
||||||
|
$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
|
||||||
|
$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
|
||||||
|
|
||||||
|
distclean-local:
|
||||||
|
$(RM) Depends-o-optimize Depends-o-debug Depends-o-profile
|
||||||
|
|
||||||
|
PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
|
||||||
|
|
||||||
33
c/src/exec/automake/multilib.am
Normal file
33
c/src/exec/automake/multilib.am
Normal file
@@ -0,0 +1,33 @@
|
|||||||
|
## $Id$
|
||||||
|
|
||||||
|
if MULTILIB
|
||||||
|
MULTISRCTOP =
|
||||||
|
MULTIDIRS =
|
||||||
|
MULTIDO = true
|
||||||
|
MULTICLEAN = true
|
||||||
|
endif
|
||||||
|
|
||||||
|
# Multilib support rules
|
||||||
|
.PHONY: all-multi mostlyclean-multi clean-multi distclean-multi \
|
||||||
|
maintainer-clean-multi
|
||||||
|
|
||||||
|
if MULTILIB
|
||||||
|
all-recursive: all-multi
|
||||||
|
mostlyclean-recursive: mostlyclean-multi
|
||||||
|
clean-recursive: clean-multi
|
||||||
|
distclean-recursive: distclean-multi
|
||||||
|
maintainer-clean-recursive: maintainer-clean-multi
|
||||||
|
|
||||||
|
all-multi:
|
||||||
|
$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do
|
||||||
|
mostlyclean-multi:
|
||||||
|
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean
|
||||||
|
clean-multi:
|
||||||
|
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean
|
||||||
|
distclean-multi:
|
||||||
|
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean
|
||||||
|
maintainer-clean-multi:
|
||||||
|
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean
|
||||||
|
else
|
||||||
|
include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
|
||||||
|
endif
|
||||||
36
c/src/exec/automake/subdirs.am
Normal file
36
c/src/exec/automake/subdirs.am
Normal file
@@ -0,0 +1,36 @@
|
|||||||
|
## $Id$
|
||||||
|
|
||||||
|
## Borrowed from automake-1.4 and adapted to RTEMS
|
||||||
|
|
||||||
|
## NOTE: This is a temporary work-around to keep
|
||||||
|
## RTEMS's non automake standard make targets working.
|
||||||
|
## Once automake is fully integrated these make targets
|
||||||
|
## and this file will probably be removed
|
||||||
|
|
||||||
|
depend-recursive \
|
||||||
|
preinstall-recursive:
|
||||||
|
@set fnord $(MAKEFLAGS); amf=$$2; \
|
||||||
|
dot_seen=no; \
|
||||||
|
target=`echo $@ | sed s/-recursive//`; \
|
||||||
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||||
|
echo "Making $$target in $$subdir"; \
|
||||||
|
if test "$$subdir" = "."; then \
|
||||||
|
dot_seen=yes; \
|
||||||
|
local_target="$$target-am"; \
|
||||||
|
else \
|
||||||
|
local_target="$$target"; \
|
||||||
|
fi; \
|
||||||
|
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
||||||
|
## This trick allows "-k" to keep its natural meaning when running a
|
||||||
|
## recursive rule.
|
||||||
|
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
|
||||||
|
done; \
|
||||||
|
if test "$$dot_seen" = "no"; then \
|
||||||
|
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
|
||||||
|
fi; test -z "$$fail"
|
||||||
|
|
||||||
|
preinstall: preinstall-recursive
|
||||||
|
.PHONY: preinstall-recursive
|
||||||
|
|
||||||
|
depend: depend-recursive
|
||||||
|
.PHONY: depend-recursive
|
||||||
256
cpukit/automake/compile.am
Normal file
256
cpukit/automake/compile.am
Normal file
@@ -0,0 +1,256 @@
|
|||||||
|
##
|
||||||
|
## $Id$
|
||||||
|
##
|
||||||
|
|
||||||
|
## -------------------------------------------------------------------------
|
||||||
|
## NOTE: This file is rather immature and has to be considered to be
|
||||||
|
## almost experimental.
|
||||||
|
##
|
||||||
|
## Expect frequent changes -- It deserves to be cleaned up :(
|
||||||
|
## -------------------------------------------------------------------------
|
||||||
|
|
||||||
|
## The section below is based on make/compilers/gcc-target-default.cfg
|
||||||
|
## used in former versions of RTEMS.
|
||||||
|
|
||||||
|
##
|
||||||
|
## Set up the flags for the toolchains:
|
||||||
|
##
|
||||||
|
## We are considering 3 different building schemes here:
|
||||||
|
## * Using gcc's being able to accept -specs (aka gcc-2.8 building scheme)
|
||||||
|
## * Using gcc's not being able to accept -specs (aka gcc-2.7.2 building
|
||||||
|
## scheme)
|
||||||
|
## * Using third party toolchains (aka non-gcc building scheme)
|
||||||
|
##
|
||||||
|
## Automake conditionals in use:
|
||||||
|
## RTEMS_USE_GCC .. if we are using GCC
|
||||||
|
|
||||||
|
## NOTES:
|
||||||
|
## * The gcc-2.8 building scheme is the nominal building scheme and
|
||||||
|
## is actively supported.
|
||||||
|
## * The non-gcc building scheme requires manually setting up environment
|
||||||
|
## variables and is hardly tested at all
|
||||||
|
|
||||||
|
## CFLAGS_OPTIMIZE_V, CFLAGS_DEBUG_V, CFLAGS_PROFILE_V are the values we
|
||||||
|
## would want the corresponding macros to be set to.
|
||||||
|
##
|
||||||
|
## CFLAGS_OPTIMIZE, CFLAGS_DEBUG, CFLAGS_PROFILE are set by the
|
||||||
|
## 'VARIANT=<OPTIMIZE|DEBUG|PROFILE>' targets to their _V values.
|
||||||
|
|
||||||
|
## XCPPFLAGS, XCFLAGS, XCXXFLAGS, XASFLAGS
|
||||||
|
## are used to add flags from the shell
|
||||||
|
## cf. make.info ("Implicit rules/variables" for details)
|
||||||
|
|
||||||
|
if RTEMS_USE_GCC
|
||||||
|
## All the stuff below is specific to gcc
|
||||||
|
|
||||||
|
CFLAGS_DEFAULT=-g -Wall
|
||||||
|
## gcc >= 2.8.x
|
||||||
|
GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
|
||||||
|
else
|
||||||
|
## fall back to the old style compilers/*.cfg
|
||||||
|
## CONFIG.CC is supposed to be provided by <BSP>.cfg
|
||||||
|
include $(CONFIG.CC)
|
||||||
|
endif # RTEMS_USE_GCC
|
||||||
|
|
||||||
|
DEFS = @DEFS@
|
||||||
|
|
||||||
|
CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) \
|
||||||
|
$(DEFINES) $(XCPPFLAGS) $(CPPFLAGS_GCC)
|
||||||
|
CFLAGS = $(CFLAGS_DEFAULT) $(CPU_CFLAGS) $(XCFLAGS)
|
||||||
|
CXXFLAGS = $(CFLAGS_DEFAULT) $(CPU_CFLAGS) $(XCXXFLAGS)
|
||||||
|
ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
|
||||||
|
|
||||||
|
LINK_LIBS = $(LD_LIBS)
|
||||||
|
|
||||||
|
## FIXME: This doesn't seem to be correct
|
||||||
|
# when debugging, optimize flag: typically empty
|
||||||
|
# some compilers do allow optimization with their "-g"
|
||||||
|
CFLAGS_DEBUG_OPTIMIZE_V=-g
|
||||||
|
CXXFLAGS_DEBUG_OPTIMIZE_V=-g
|
||||||
|
LDFLAGS_DEBUG_V =
|
||||||
|
|
||||||
|
# profile flag; use gprof(1)
|
||||||
|
CFLAGS_PROFILE_V=-pg
|
||||||
|
CXXFLAGS_PROFILE_V=-pg
|
||||||
|
LDFLAGS_PROFILE_V =
|
||||||
|
|
||||||
|
# List of library paths without -L
|
||||||
|
LD_PATHS= $(PROJECT_RELEASE)/lib
|
||||||
|
|
||||||
|
# ld flag for incomplete link
|
||||||
|
LDFLAGS_INCOMPLETE = -r
|
||||||
|
|
||||||
|
# ld flags for profiling, debugging
|
||||||
|
LDFLAGS=$(LDFLAGS_PROFILE) $(LDFLAGS_DEBUG) $(LD_PATHS:%=-L %)
|
||||||
|
|
||||||
|
#
|
||||||
|
# Client compiler and support tools
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# How to compile stuff into ${ARCH} subdirectory
|
||||||
|
#
|
||||||
|
|
||||||
|
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
|
||||||
|
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||||
|
CCLD = $(CC)
|
||||||
|
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
|
||||||
|
$(AM_LDFLAGS) $(LDFLAGS) -o $@
|
||||||
|
|
||||||
|
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
|
||||||
|
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
|
||||||
|
CXXLD = $(CXX)
|
||||||
|
CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
|
||||||
|
$(AM_LDFLAGS) $(LDFLAGS) -o $@
|
||||||
|
|
||||||
|
AS = $(CC)
|
||||||
|
ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
|
||||||
|
|
||||||
|
${ARCH}/%.o: %.c
|
||||||
|
${COMPILE} -o $@ -c $<
|
||||||
|
|
||||||
|
${ARCH}/%.o: %.cc
|
||||||
|
${CXXCOMPILE} -o $@ -c $<
|
||||||
|
|
||||||
|
${ARCH}/%.o: %.cpp
|
||||||
|
${CXXCOMPILE} -o $@ -c $<
|
||||||
|
|
||||||
|
${ARCH}/%.o: %.cxx
|
||||||
|
${CXXCOMPILE} -o $@ -c $<
|
||||||
|
|
||||||
|
${ARCH}/%.o: %.C
|
||||||
|
${CXXCOMPILE} -o $@ -c $<
|
||||||
|
|
||||||
|
${ARCH}/%.o: %.S
|
||||||
|
${ASCOMPILE} -DASM -o $@ -c $<
|
||||||
|
|
||||||
|
# Make foo.rel from foo.o
|
||||||
|
${ARCH}/%.rel: ${ARCH}/%.o
|
||||||
|
${make-rel}
|
||||||
|
|
||||||
|
# Dependency files for use by gmake
|
||||||
|
# NOTE: we don't put them into $(ARCH)
|
||||||
|
# so that 'make clean' doesn't blow it away
|
||||||
|
|
||||||
|
DEPEND=Depends-${ARCH}
|
||||||
|
|
||||||
|
CLEAN_DEPEND=$(DEPEND).tmp
|
||||||
|
CLOBBER_DEPEND=$(DEPEND)
|
||||||
|
|
||||||
|
# We deliberately don't have anything depend on the
|
||||||
|
# $(DEPEND) file; otherwise it will get rebuilt even
|
||||||
|
# on 'make clean'
|
||||||
|
#
|
||||||
|
|
||||||
|
## HACK: Specific to gcc
|
||||||
|
## FIXME: The approach below is known to be conceptionally broken.
|
||||||
|
depend-am: $(C_FILES) $(CC_FILES) $(S_FILES)
|
||||||
|
## Use gcc -M to generate dependencies
|
||||||
|
## Replace foo.o with $(ARCH)/foo.o
|
||||||
|
## Replace $(ARCH) value with string $(ARCH)
|
||||||
|
## so that it will for debug and profile cases
|
||||||
|
$(COMPILE) -M $^ | \
|
||||||
|
sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
|
||||||
|
-e 's?$(ARCH)/?$$(ARCH)/?' >$(DEPEND).tmp
|
||||||
|
mv $(DEPEND).tmp $(DEPEND)
|
||||||
|
depend: depend-am
|
||||||
|
|
||||||
|
# pull in dependencies if they exist
|
||||||
|
ifeq (${DEPEND},$(wildcard ${DEPEND}))
|
||||||
|
include ${DEPEND}
|
||||||
|
@ENDIF@
|
||||||
|
|
||||||
|
|
||||||
|
# spell out all the LINK_FILE's, rather than using -lbsp, so
|
||||||
|
# that $(LINK_FILES) can be a dependency
|
||||||
|
|
||||||
|
LINK_OBJS = \
|
||||||
|
$(OBJS) \
|
||||||
|
$(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
|
||||||
|
|
||||||
|
LINK_FILES =\
|
||||||
|
$(START_FILE) \
|
||||||
|
$(OBJS) \
|
||||||
|
$(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
|
||||||
|
|
||||||
|
if RTEMS_USE_GCC
|
||||||
|
## gcc >= 2.8
|
||||||
|
define make-rel
|
||||||
|
$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
|
||||||
|
endef
|
||||||
|
else
|
||||||
|
## non-gcc
|
||||||
|
define make-rel
|
||||||
|
$(LINK) $(XLDFLAGS) $^
|
||||||
|
endef
|
||||||
|
endif
|
||||||
|
|
||||||
|
## -------------------------------------------------------------------------
|
||||||
|
|
||||||
|
## translate VARIANT into VARIANT_V
|
||||||
|
VARIANT = OPTIMIZE
|
||||||
|
|
||||||
|
VARIANT_OPTIMIZE_V = OPTIMIZE
|
||||||
|
VARIANT_DEBUG_V = DEBUG
|
||||||
|
VARIANT_PROFILE_V = PROFILE
|
||||||
|
VARIANT_optimize_V = OPTIMIZE
|
||||||
|
VARIANT_debug_V = DEBUG
|
||||||
|
VARIANT_profile_V = PROFILE
|
||||||
|
|
||||||
|
VARIANT_V = $(VARIANT_$(VARIANT)_V)
|
||||||
|
|
||||||
|
## Setup the variant build subdirectory
|
||||||
|
ARCH_OPTIMIZE_V = o-optimize
|
||||||
|
ARCH_DEBUG_V = o-debug
|
||||||
|
ARCH_PROFILE_V = o-profile
|
||||||
|
|
||||||
|
ARCH__V = $(ARCH_OPTIMIZE_V)
|
||||||
|
ARCH = $(ARCH_$(VARIANT_V)_V)
|
||||||
|
|
||||||
|
## Setup the library suffix
|
||||||
|
LIBSUFFIX_OPTIMIZE_V =
|
||||||
|
LIBSUFFIX_DEBUG_V = _g
|
||||||
|
LIBSUFFIX_PROFILE_V = _p
|
||||||
|
LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
|
||||||
|
|
||||||
|
LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
|
||||||
|
LIBSUFFIX_VA = $(LIB_VARIANT).a
|
||||||
|
|
||||||
|
## These are supposed to be set in make/custom/<bsp>.cfg
|
||||||
|
## CFLAGS_OPTIMIZE_V =
|
||||||
|
## CFLAGS_DEBUG_V =
|
||||||
|
## CFLAGS_PROFILE_V =
|
||||||
|
CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
|
||||||
|
|
||||||
|
## ------------------------------------------------------------------------
|
||||||
|
## Setup hard-coded flags
|
||||||
|
if RTEMS_USE_GCC
|
||||||
|
## gcc >= gcc-2.8
|
||||||
|
RTEMS_CFLAGS_OPTIMIZE_V =
|
||||||
|
RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
|
||||||
|
RTEMS_CFLAGS_PROFILE_V =
|
||||||
|
|
||||||
|
## non-gcc
|
||||||
|
## We can't guess what flags might be required here.
|
||||||
|
## Pass the values from the environment if you want to apply them.
|
||||||
|
endif
|
||||||
|
RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
|
||||||
|
|
||||||
|
## -------------------------------------------------------------------------
|
||||||
|
|
||||||
|
CC = @CC@ $(GCCSPECS)
|
||||||
|
CXX = @CXX@ $(GCCSPECS)
|
||||||
|
CPP = @CPP@ $(GCCSPECS)
|
||||||
|
|
||||||
|
LD = @LD@
|
||||||
|
OBJCOPY = @OBJCOPY@
|
||||||
|
NM = @NM@
|
||||||
|
SIZE = @SIZE@
|
||||||
|
STRIP = @STRIP@
|
||||||
|
|
||||||
|
|
||||||
|
##
|
||||||
|
AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
|
||||||
|
|
||||||
|
AM_CFLAGS = $(RTEMS_CFLAGS_$(VARIANT_V)_V) $(CFLAGS_$(VARIANT_V)_V)
|
||||||
|
AM_CXXFLAGS = $(RTEMS_CFLAGS_$(VARIANT_V)_V) $(CFLAGS_$(VARIANT_V)_V)
|
||||||
22
cpukit/automake/lib.am
Normal file
22
cpukit/automake/lib.am
Normal file
@@ -0,0 +1,22 @@
|
|||||||
|
##
|
||||||
|
## $Id$
|
||||||
|
##
|
||||||
|
|
||||||
|
## LD = @LD@
|
||||||
|
AR = @AR@
|
||||||
|
RANLIB = @RANLIB@
|
||||||
|
|
||||||
|
ARFLAGS = ruv
|
||||||
|
|
||||||
|
define make-library
|
||||||
|
$(RM) $@
|
||||||
|
$(AR) $(ARFLAGS) $@ $^
|
||||||
|
$(RANLIB) $@
|
||||||
|
endef
|
||||||
|
|
||||||
|
$(PROJECT_RELEASE)/lib$(MULTISUBDIR):
|
||||||
|
@$(mkinstalldirs) $@
|
||||||
|
|
||||||
|
TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib$(MULTISUBDIR)
|
||||||
|
|
||||||
|
.PRECIOUS: $(LIB)
|
||||||
38
cpukit/automake/local.am
Normal file
38
cpukit/automake/local.am
Normal file
@@ -0,0 +1,38 @@
|
|||||||
|
## $Id$
|
||||||
|
|
||||||
|
debug:
|
||||||
|
@echo
|
||||||
|
@echo "\"make debug\" is obsolete, instead use:"
|
||||||
|
@echo " make VARIANT=DEBUG"
|
||||||
|
@echo
|
||||||
|
|
||||||
|
.PHONY: debug
|
||||||
|
|
||||||
|
profile:
|
||||||
|
@echo
|
||||||
|
@echo "\"make profile\" is obsolete, instead use:"
|
||||||
|
@echo " make VARIANT=PROFILE"
|
||||||
|
@echo
|
||||||
|
|
||||||
|
.PHONY: profile
|
||||||
|
|
||||||
|
preinstall-am: $(PREINSTALL_FILES)
|
||||||
|
preinstall: preinstall-am
|
||||||
|
.PHONY: preinstall preinstall-am
|
||||||
|
|
||||||
|
depend-am:
|
||||||
|
depend: depend-am
|
||||||
|
.PHONY: depend depend-am
|
||||||
|
|
||||||
|
${ARCH}:
|
||||||
|
mkdir ${ARCH}
|
||||||
|
|
||||||
|
clean-local:
|
||||||
|
$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
|
||||||
|
$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
|
||||||
|
|
||||||
|
distclean-local:
|
||||||
|
$(RM) Depends-o-optimize Depends-o-debug Depends-o-profile
|
||||||
|
|
||||||
|
PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
|
||||||
|
|
||||||
33
cpukit/automake/multilib.am
Normal file
33
cpukit/automake/multilib.am
Normal file
@@ -0,0 +1,33 @@
|
|||||||
|
## $Id$
|
||||||
|
|
||||||
|
if MULTILIB
|
||||||
|
MULTISRCTOP =
|
||||||
|
MULTIDIRS =
|
||||||
|
MULTIDO = true
|
||||||
|
MULTICLEAN = true
|
||||||
|
endif
|
||||||
|
|
||||||
|
# Multilib support rules
|
||||||
|
.PHONY: all-multi mostlyclean-multi clean-multi distclean-multi \
|
||||||
|
maintainer-clean-multi
|
||||||
|
|
||||||
|
if MULTILIB
|
||||||
|
all-recursive: all-multi
|
||||||
|
mostlyclean-recursive: mostlyclean-multi
|
||||||
|
clean-recursive: clean-multi
|
||||||
|
distclean-recursive: distclean-multi
|
||||||
|
maintainer-clean-recursive: maintainer-clean-multi
|
||||||
|
|
||||||
|
all-multi:
|
||||||
|
$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do
|
||||||
|
mostlyclean-multi:
|
||||||
|
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean
|
||||||
|
clean-multi:
|
||||||
|
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean
|
||||||
|
distclean-multi:
|
||||||
|
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean
|
||||||
|
maintainer-clean-multi:
|
||||||
|
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean
|
||||||
|
else
|
||||||
|
include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
|
||||||
|
endif
|
||||||
36
cpukit/automake/subdirs.am
Normal file
36
cpukit/automake/subdirs.am
Normal file
@@ -0,0 +1,36 @@
|
|||||||
|
## $Id$
|
||||||
|
|
||||||
|
## Borrowed from automake-1.4 and adapted to RTEMS
|
||||||
|
|
||||||
|
## NOTE: This is a temporary work-around to keep
|
||||||
|
## RTEMS's non automake standard make targets working.
|
||||||
|
## Once automake is fully integrated these make targets
|
||||||
|
## and this file will probably be removed
|
||||||
|
|
||||||
|
depend-recursive \
|
||||||
|
preinstall-recursive:
|
||||||
|
@set fnord $(MAKEFLAGS); amf=$$2; \
|
||||||
|
dot_seen=no; \
|
||||||
|
target=`echo $@ | sed s/-recursive//`; \
|
||||||
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||||
|
echo "Making $$target in $$subdir"; \
|
||||||
|
if test "$$subdir" = "."; then \
|
||||||
|
dot_seen=yes; \
|
||||||
|
local_target="$$target-am"; \
|
||||||
|
else \
|
||||||
|
local_target="$$target"; \
|
||||||
|
fi; \
|
||||||
|
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
||||||
|
## This trick allows "-k" to keep its natural meaning when running a
|
||||||
|
## recursive rule.
|
||||||
|
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
|
||||||
|
done; \
|
||||||
|
if test "$$dot_seen" = "no"; then \
|
||||||
|
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
|
||||||
|
fi; test -z "$$fail"
|
||||||
|
|
||||||
|
preinstall: preinstall-recursive
|
||||||
|
.PHONY: preinstall-recursive
|
||||||
|
|
||||||
|
depend: depend-recursive
|
||||||
|
.PHONY: depend-recursive
|
||||||
Reference in New Issue
Block a user