RTOS/rtems
1
0
Fork 0
forked from Imagelibrary/rtems
Code Pull Requests Activity

Corrected minor things including changing RTEMSBSP to RTEMS_BSP.

Browse Source
This commit is contained in:
Joel Sherrill
1997-12-16 18:39:28 +00:00
parent d2632274d6
commit 9e86f6d6df
1 changed files with 8 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
README.configure
View File

@@ -21,9 +21,9 @@ RTEMS-specific option are supported:
--disable-tests --disable-tests
--disable-ka9q --disable-ka9q
--enable-cpp --enable-cpp
--enable-gcc28 --enable-gcc28 (also use enable-libcdir when disabled)
--enable-gmake-print-directory --enable-gmake-print-directory
--enable-libcdir=<DIRECTORY> (do not use gcc 2.8 is enabled) --enable-libcdir=<DIRECTORY> (do not use if gcc 2.8 is enabled)
--enable-rtemsbsp="bsp1 bsp2 ..." --enable-rtemsbsp="bsp1 bsp2 ..."
By default, the RTEMS posix interface is built for targets that support By default, the RTEMS posix interface is built for targets that support
@@ -46,14 +46,14 @@ the location of the Standard C Library with the --enable-libcdir
option. If using a gcc which supports the -specs option, then option. If using a gcc which supports the -specs option, then
the --enable-gcc28 option may be used to enable this feature. the --enable-gcc28 option may be used to enable this feature.
You should use the --enable-gcc28 option when using either the You should use the --enable-gcc28 option when using either the
egcs source tree or testgcc snapshots. egcs source tree, testgcc snapshots, or gcc 2.8.0 or newer.
By default, all bsps for a target are built. There are two ways of By default, all bsps for a target are built. There are two ways of
changing this: changing this:
+ use the --enable-rtemsbsp otion which will set the specified + use the --enable-rtemsbsp otion which will set the specified
bsps as the default bsps, or bsps as the default bsps, or
+ set the RTEMSBSP variable during make (see below). + set the RTEMS_BSP variable during make (see below).
The --enable-rtemsbsp= option configures RTEMS for a specific target The --enable-rtemsbsp= option configures RTEMS for a specific target
architecture. The following targets are supported: architecture. The following targets are supported:
@@ -83,7 +83,8 @@ overriden by one of the following methods:
--program-prefix=m68k-coff- option. --program-prefix=m68k-coff- option.
To build, run make in the build directory. To specify which bsps to build, To build, run make in the build directory. To specify which bsps to build,
add the RTEMSBSP="bsp1 bsp2 .." to the make command. add the RTEMS_BSP="bsp1 bsp2 .." to the make command. Specifying multiple
BSPs to build only works from the top level build directory.
Installation is done under $(prefix)/$(target)/rtems. Installation is done under $(prefix)/$(target)/rtems.
@@ -91,10 +92,9 @@ As an example, to build and install the mvme136 and dmv152 bsps for m68k do:
(path_to_rtems_src)/configure --target=m68k-rtems (path_to_rtems_src)/configure --target=m68k-rtems
make RTEMSBSP="mvme136 dmv152" make RTEMS_BSP="mvme136 dmv152"
make install RTEMSBSP="mvme136 dmv152" make install RTEMS_BSP="mvme136 dmv152"
The sample tests are built by 'make all', do a 'make test' to build the full The sample tests are built by 'make all', do a 'make test' to build the full
test suite. test suite.