bsp/mpc5200: New BSP variant BRS6L

c/src/lib/libbsp/powerpc/gen5200/Makefile.am

@@ -33,6 +33,7 @@ project_lib_DATA += rtems_crti.$(OBJEXT)
 dist_project_lib_DATA += startup/linkcmds.base
 project_lib_DATA += startup/linkcmds
 EXTRA_DIST = startup/linkcmds.brs5l
+EXTRA_DIST += startup/linkcmds.brs6l
 EXTRA_DIST += startup/linkcmds.icecube
 EXTRA_DIST += startup/linkcmds.pm520_cr825
 EXTRA_DIST += startup/linkcmds.pm520_ze30

c/src/lib/libbsp/powerpc/gen5200/configure.ac

@@ -36,7 +36,7 @@ RTEMS_BSPOPTS_HELP([BSP_PRESS_KEY_FOR_RESET],
 
 RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[icecube],[1])
 RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[pm520_*],[1])
-RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[brs5l],[1])
+RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[brs*l],[1])
 RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[*],[0])
 RTEMS_BSPOPTS_HELP([BSP_RESET_BOARD_AT_EXIT],
 [If set to !0, reset the board when the application exits.])
@@ -44,8 +44,8 @@ RTEMS_BSPOPTS_HELP([BSP_RESET_BOARD_AT_EXIT],
 RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITMASK],[pm520_ze30],[0x037F3F07])
 RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITVAL],[pm520_ze30],[0x01552104])
 
-RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITMASK],[brs5l],[0xb30F0F77])
+RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITMASK],[brs*l],[0xb30F0F77])
-RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITVAL],[brs5l],[0x91050444])
+RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITVAL],[brs*l],[0x91050444])
 
 RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITMASK],[dp2],[0x337F3F77])
 RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITVAL],[dp2],[0x03550040])
@@ -68,8 +68,8 @@ set via BSP_GPIOPCR_INITVAL.])
 RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[pm520_ze30],[0x39])
 ## on cr825, we have PSC1/2/3
 RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[pm520_cr825],[0x07])
-## on brs5l, we have PSC1/2/3
+## on brs5l and brs6l, we have PSC1/2/3
-RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[brs5l],[0x07])
+RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[brs*l],[0x07])
 ## on icecube, we only have PSC1
 RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[icecube],[0x01])
 ## dp2: PSC2 (via USB connector), PSC6 (GPS module)
@@ -109,6 +109,10 @@ RTEMS_BSPOPTS_SET([MPC5200_BOARD_BRS5L],[brs5l],[1])
 RTEMS_BSPOPTS_HELP([MPC5200_BOARD_BRS5L],
 [enable settings for BRS5L])
 
+RTEMS_BSPOPTS_SET([MPC5200_BOARD_BRS6L],[brs6l],[1])
+RTEMS_BSPOPTS_HELP([MPC5200_BOARD_BRS6L],
+[enable settings for BRS6L])
+
 RTEMS_BSPOPTS_SET([MPC5200_BOARD_DP2],[dp2],[1])
 RTEMS_BSPOPTS_HELP([MPC5200_BOARD_DP2],
 [enable settings for DP2])

c/src/lib/libbsp/powerpc/gen5200/include/bsp.h

@@ -109,6 +109,16 @@ LINKER_SYMBOL(MBAR);
 
 #define HAS_NVRAM_93CXX
 
+#elif defined(MPC5200_BOARD_BRS6L)
+  #define MPC5200_BRS6L_FPGA_BEGIN 0x800000
+  #define MPC5200_BRS6L_FPGA_SIZE (64 * 1024)
+  #define MPC5200_BRS6L_FPGA_END \
+    (MPC5200_BRS6L_FPGA_BEGIN + MPC5200_BRS6L_FPGA_SIZE)
+
+  #define MPC5200_BRS6L_MRAM_BEGIN 0xff000000
+  #define MPC5200_BRS6L_MRAM_SIZE (4 * 1024 * 1024)
+  #define MPC5200_BRS6L_MRAM_END \
+    (MPC5200_BRS6L_MRAM_BEGIN + MPC5200_BRS6L_MRAM_SIZE)
 #elif defined (PM520)
 
 /* Nothing special */
@@ -193,7 +203,7 @@ extern int rtems_mpc5200_fec_driver_attach_detach (struct rtems_bsdnet_ifconfig
 #define IPB_CLOCK (bsp_uboot_board_info.bi_ipbfreq)
 #define XLB_CLOCK (bsp_uboot_board_info.bi_busfreq)
 #define G2_CLOCK  (bsp_uboot_board_info.bi_intfreq)
-#elif defined(MPC5200_BOARD_BRS5L)
+#elif defined(MPC5200_BOARD_BRS5L) || defined(MPC5200_BOARD_BRS6L)
 #define IPB_CLOCK 66000000   /* 66 MHz */
 #define XLB_CLOCK 132000000  /* 132 MHz */
 #define G2_CLOCK  396000000  /* 396 MHz */

c/src/lib/libbsp/powerpc/gen5200/make/custom/brs6l.cfg

@@ -0,0 +1,10 @@
+#
+#  Config file for customer specific MPC5200 board
+#
+
+#
+#  All GEN5200 configurations share the same base file, only a few
+#  parameters differ.
+#  
+
+include $(RTEMS_ROOT)/make/custom/gen5200.inc

c/src/lib/libbsp/powerpc/gen5200/start/start.S

@@ -300,6 +300,8 @@ start:
 
 #if defined(MPC5200_BOARD_BRS5L)
 	#define CSBOOTROM_VAL 0x0101D910
+#elif defined(MPC5200_BOARD_BRS6L)
+	#define CSBOOTROM_VAL 0x0202D910
 #endif
 
 #ifdef CSBOOTROM_VAL
@@ -528,29 +530,54 @@ SDRAM_init:
 
 	#define SDELAY_VAL 0x00000004
 
+#if defined(MPC5200_BOARD_BRS6L)
+	#define CFG1_VAL 0x73722930
+#else
 	/*
 	 * Single Read2Read/Write delay=0xC, Single Write2Read/Prec. delay=0x4
 	 * Read CAS latency=0x2, Active2Read delay=0x2, Prec.2active delay=0x2
 	 */
 	#define CFG1_VAL 0xC4222600
+#endif
 
+#if defined(MPC5200_BOARD_BRS6L)
+	#define CFG2_VAL 0x47770000
+#else
 	/* Refr.2No-Read delay=0x06, Write latency=0x0 */
 	/* Burst2Read Prec.delay=0x8, Burst Write delay=0x8 */
 	/* Burst Read2Write delay=0xB, Burst length=0x7, Read Tap=0x4 */
 	#define CFG2_VAL 0xCCC70004
+#endif
 
 #if defined(MPC5200_BOARD_BRS5L)
 	/* Mode Set enabled, Clock enabled, Auto refresh enabled, Mem. data drv */
 	/* Refresh counter=0xFFFF */
 	#define CTRL_VAL 0xD1470000
+#elif defined(MPC5200_BOARD_BRS6L)
+	#define CTRL_VAL 0xF15F0F00
 #else
 	/* Mode Set enabled, Clock enabled, Auto refresh enabled, Mem. data drv */
 	/* Refresh counter=0xFFFF */
 	#define CTRL_VAL 0xD04F0000
 #endif
 
+#if defined(MPC5200_BOARD_BRS6L)
+	/* Enable DLL, normal drive strength */
+	#define EMODE_VAL 0x40010000
+#endif
+
+#if defined(MPC5200_BOARD_BRS6L)
+	/* Burst length = 8, burst type sequential, CAS latency 2.5, normal operation/reset DLL */
+	#define MODE_VAL 0x058D0000
+#else
 	/* Op.Mode=0x0, Read CAS latency=0x2, Burst length=0x3, Write strobe puls */
 	#define MODE_VAL 0x008D0000
+#endif
+
+#if defined(MPC5200_BOARD_BRS6L)
+	/* Burst length = 8, burst type sequential, CAS latency 2.5, normal operation */
+	#define SECOND_MODE_VAL (MODE_VAL & ~0x04000000)
+#endif
 
 	/* SDRAM initialization according to application note AN3221 */
 

c/src/lib/libbsp/powerpc/gen5200/startup/cpuinit.c

@@ -121,7 +121,7 @@ static void cpu_init_bsp(void)
 {
   BAT dbat;
 
-#if defined(MPC5200_BOARD_BRS5L)
+#if defined(MPC5200_BOARD_BRS5L) || defined(MPC5200_BOARD_BRS6L)
   calc_dbat_regvals(
     &dbat,
     (uint32_t) bsp_ram_start,
@@ -157,18 +157,6 @@ static void cpu_init_bsp(void)
     BPP_RW
   );
   SET_DBAT(2,dbat.batu,dbat.batl);
-
-  calc_dbat_regvals(
-    &dbat,
-    (uint32_t) bsp_dpram_start,
-    128 * 1024,
-    false,
-    true,
-    false,
-    true,
-    BPP_RW
-  );
-  SET_DBAT(3,dbat.batu,dbat.batl);
 #elif defined (HAS_UBOOT)
   uint32_t start = 0;
 
@@ -285,6 +273,46 @@ static void cpu_init_bsp(void)
     BPP_RW
   );
   SET_DBAT(4, dbat.batu, dbat.batl);
+#elif defined(MPC5200_BOARD_BRS5L)
+  calc_dbat_regvals(
+    &dbat,
+    (uint32_t) bsp_dpram_start,
+    128 * 1024,
+    false,
+    true,
+    false,
+    true,
+    BPP_RW
+  );
+  SET_DBAT(3,dbat.batu,dbat.batl);
+#elif defined(MPC5200_BOARD_BRS6L)
+  enable_bat_4_to_7();
+
+  /* FPGA */
+  calc_dbat_regvals(
+    &dbat,
+    MPC5200_BRS6L_FPGA_BEGIN,
+    MPC5200_BRS6L_FPGA_SIZE,
+    false,
+    true,
+    false,
+    true,
+    BPP_RW
+  );
+  SET_DBAT(3,dbat.batu,dbat.batl);
+
+  /* MRAM */
+  calc_dbat_regvals(
+    &dbat,
+    MPC5200_BRS6L_MRAM_BEGIN,
+    MPC5200_BRS6L_MRAM_SIZE,
+    true,
+    false,
+    false,
+    false,
+    BPP_RW
+  );
+  SET_DBAT(4,dbat.batu,dbat.batl);
 #endif
 }
 

c/src/lib/libbsp/powerpc/gen5200/startup/linkcmds.brs6l

@@ -0,0 +1,15 @@
+/**
+ * @file
+ *
+ * Linker command file for the BRS6L board.
+ */
+
+MEMORY {
+	/* For the 4k adjustment see cpuinit.c */
+	RAM : ORIGIN = 0x0, LENGTH = 128M - 4k
+	ROM : ORIGIN = 0xff800000, LENGTH = 8M
+	DPRAM : ORIGIN = 0xff000000, LENGTH = 0
+	REGS : ORIGIN = 0xf0000000, LENGTH = 64k
+}
+
+INCLUDE linkcmds.base