2010-09-27 Ralf Corsépius <ralf.corsepius@rtems.org>

* README.configure: Cleanup.

ChangeLog

@@ -1,3 +1,7 @@
+2010-09-27	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* README.configure: Cleanup.
+
 2010-06-23	Ralf Corsépius <ralf.corsepius@rtems.org>
 
 	* configure.ac: autoconf >= 2.65, automake >= 1.11.

README.configure

@@ -11,24 +11,20 @@ tools in the Cygnus one-tree structure. Using autoconf also means
 that RTEMS now can be built in a separate build directory.
 
 To re-generate auto*tool generated files (configure, Makefile.in etc),
-autoconf-2.59 and automake-1.8 are required.
+autoconf-2.68 and automake-1.11.1 are required.
 
 2. Installation
 ===============
 
-2.1 Standalone build
-
 To configure RTEMS for a specific target, run configure in the build
 directory. In addition to the standard configure options, the following
 RTEMS-specific option are supported:
 
       --disable-rtems-inlines
       --disable-posix
-      --disable-itron
+      --enable-itron
       --disable-networking
       --enable-cxx
-      --enable-bare-cpu-model=<MODEL>
-      --enable-bare-cpu-cflags=<FLAGS>
       --enable-multiprocessing
       --enable-rtemsbsp="bsp1 bsp2 ..."
       --enable-tests
@@ -88,8 +84,6 @@ within a target architecture.  Remember that the target specifies the
 CPU family while the BSP specifies the precise board you will be using. 
 The following targets are supported:
 
-      (none)	will build the host-based version on Linux, Solaris and HPUX.
-
       arm-rtems4.10
       avr-rtems4.10
       bfin-rtems4.10
@@ -104,7 +98,6 @@ The following targets are supported:
       powerpc-rtems4.10
       sh-rtems4.10
       sparc-rtems4.10
-      bare                    see notes
 
 The cross-compiler is set to $(target)-gcc by default.
 
@@ -116,7 +109,7 @@ Installation is done under $(prefix)/rtems.
 
 As an example, to build and install the mvme136 and mvme162 bsps for m68k do:
 
-      (path_to_rtems_src)/configure --target=m68k-rtems
+      (path_to_rtems_src)/configure --target=m68k-rtems4.10
 
       make RTEMS_BSP="mvme136 mvme162"
       
@@ -128,19 +121,6 @@ test suite.
 
 Documentation is built separately from the source code.
 
-2.2 Target Dependent Notes
-
-bare:
-
-1.  See the README in the bare bsp source directory. This should
-    contain all info you need.
-2.  The bare bsp source contains a script to show how to build it.
-3.  The configure flags must be used to get the bare bsp to work.
-    The --enable-bare-cpu-model and --enable-bare-cpu-cflags are the
-    only pieces of information. The module is usually a gcc module
-    such as m68302 or mcpu32. The flags are passed directly to gcc.
-    Use "" if more than one option is specified.
-
 3. To use the installed RTEMS library
 =====================================
 
@@ -162,8 +142,6 @@ following:
 
 The following bsps are supported:
 
-host-based	: posix (on Linux, FreeBSD, Cygwin, Solaris, and HPUX)
-
 arm             : csb336 csb337 edb7312 gba gp32 nds rtl22x rtl22xx_t
                   smdk2410
 
@@ -171,8 +149,6 @@ avr:            : avrtest
 
 bfin            : eZKit533 bf537Stamp
 
-c4x             : c3xsim c4xsim
-
 h8300           : h8sim
 
 i386		: i386ex pc386 pc386dx pc486 pc586 pc686 pck6 ts_386ex
@@ -215,12 +191,6 @@ sh              : gensh1 gensh2 gensh4 simsh1 simsh2 simsh4
 
 sparc 		: erc32 sis leon2 leon3
 
-any             : bare
-
-The following ports were considered obsoleted after the 4.6 releases
-and were removed: a29k, hppa, i960, mips64orion, and or32.
-
-
 5. Makefile structure
 =====================
 
@@ -248,13 +218,6 @@ Please refer to the BSP and Device Driver Guide.
 
 All gnu-based bsps have been built on Linux. 
 
-The native (posix) ports have been built and run only on Linux.
-
-The following configurations have NOT been tested:
-
-    + Anything on Nextstep, HPUX and Irix.
-    + The C4x and OR32 ports (requires specially patched toolchain)
-
 8. Prerequisites
 ================