Enabled Ada95 interrupt support chapter and reformatted a

bunch of stuff to avoid line wrappings.

doc/bsp_howto/Makefile

@@ -19,8 +19,8 @@ COMMON_FILES=../common/cpright.texi ../common/setup.texi
 
 GENERATED_FILES= \
     intro.texi target.texi makefiles.texi linkcmds.texi support.texi \
-    init.texi console.texi clock.texi timer.texi rtc.texi nvmem.texi \
+    adaintr.texi init.texi console.texi clock.texi timer.texi rtc.texi \
-    network.texi shmsupp.texi analog.texi discrete.texi
+    nvmem.texi network.texi shmsupp.texi analog.texi discrete.texi
 
 FILES=$(PROJECT).texi $(GENERATED_FILES)
 
@@ -88,11 +88,16 @@ makefiles.texi: makefiles.t Makefile
 
 linkcmds.texi: linkcmds.t Makefile
 	$(BMENU) -p "Makefiles Creating a New BSP Make Customization File" \
+	    -u "Top" \
+	    -n "Ada95 Interrupt Support" ${*}.t
+
+adaintr.texi: adaintr.t Makefile
+	$(BMENU) -p "Linker Script Initialized Data" \
 	    -u "Top" \
 	    -n "Miscellaneous Support Files" ${*}.t
 
 support.texi: support.t Makefile
-	$(BMENU) -p "Linker Script Initialized Data" \
+	$(BMENU) -p "Ada95 Interrupt Support Version Requirements" \
 	    -u "Top" \
 	    -n "" ${*}.t
 

doc/bsp_howto/bsp_howto.texi

@@ -67,6 +67,7 @@ END-INFO-DIR-ENTRY
 @include makefiles.texi
 @include linkcmds.texi
 @include support.texi
+@include adaintr.texi
 @include init.texi
 @include console.texi
 @include clock.texi
@@ -90,6 +91,7 @@ This is the online version of the RTEMS BSP and Device Driver Development Guide.
 * Makefiles::
 * Linker Script::
 * Miscellaneous Support Files::
+* Ada95 Interrupt Support::
 * Initialization Code::
 * Console Driver::
 * Clock Driver::
@@ -100,27 +102,27 @@ This is the online version of the RTEMS BSP and Device Driver Development Guide.
 * Shared Memory Support Driver::
 * Analog Driver::
 * Discrete Driver::
+* Command and Variable Index::
+* Concept Index::
 @end menu
 
-@c * Command and Variable Index::
-@c * Concept Index::
 @end ifinfo
 @c 
 @c 
 @c Need to copy the emacs stuff and "trailer stuff" (index, toc) into here
 @c
 
-@c @node Command and Variable Index, Concept Index, Installing EGCS AND NEWLIB, Top
+@node Command and Variable Index, Concept Index, , Top
-@c @unnumbered Command and Variable Index
+@unnumbered Command and Variable Index
 
-@c There are currently no Command and Variable Index entries.
+There are currently no Command and Variable Index entries.
 
 @c @printindex fn
 
-@c @node Concept Index, , Command and Variable Index, Top
+@node Concept Index, , Command and Variable Index, Top
-@c @unnumbered Concept Index
+@unnumbered Concept Index
 
-@c There are currently no Concept Index entries.
+There are currently no Concept Index entries.
 @c @printindex cp
 
 @contents

doc/bsp_howto/console.t

@@ -268,7 +268,8 @@ usually consists of:
 @item If interrupt driven, register the console interrupt routine to RTEMS:
 
 @example
-	rtems_interrupt_catch (InterruptHandler,CONSOLE_VECTOR,&old_handler);
+rtems_interrupt_catch(
+    InterruptHandler, CONSOLE_VECTOR, &old_handler);
 @end example
 
 @item enable the UART channels.

doc/bsp_howto/linkcmds.t

@@ -129,17 +129,18 @@ RamSize = DEFINED(RamSize) ? RamSize : 4M;
 
 /*
  *  Set the amount of RAM to be used for the application heap.  Objects
- *  allocated using malloc() come from this area.  Having a tight heap size
+ *  allocated using malloc() come from this area.  Having a tight heap
- *  is somewhat difficult and multiple attempts to squeeze it may be needed
+ *  size is somewhat difficult and multiple attempts to squeeze it may
- *  reducing memory usage is important.  If all objects are allocated from
+ *  be needed reducing memory usage is important.  If all objects are
- *  the heap at system initialization time, this eases the sizing of the
+ *  allocated from the heap at system initialization time, this eases
- *  application heap.  
+ *  the sizing of the application heap.  
  *
  *  NOTE 1: The default may be overridden by passing an argument to ld.
  *
  *  NOTE 2: The TCP/IP stack requires additional memory in the Heap.
  *  
- *  NOTE 3: The GNAT/RTEMS run-time requires additional memory in the Heap.
+ *  NOTE 3: The GNAT/RTEMS run-time requires additional memory in
+ *  the Heap.
  */
 
 HeapSize = DEFINED(HeapSize) ? HeapSize : 0x10000;
@@ -157,8 +158,9 @@ StackSize = DEFINED(StackSize) ? StackSize : 0x1000;
 /*
  *  Starting addresses and length of RAM and ROM.
  *
- *  The addresses must be valid addresses on the board.  The Chip Selects
+ *  The addresses must be valid addresses on the board.  The
- *  should be initialized such that the code addresses are valid.
+ *  Chip Selects should be initialized such that the code addresses
+ *  are valid.
  */
 
 MEMORY @{
@@ -171,17 +173,18 @@ MEMORY @{
  *  for more details.
  */
 
-ETHERNET_ADDRESS = DEFINED(ETHERNET_ADDRESS) ? ETHERNET_ADDRESS : 0xDEAD12;
+ETHERNET_ADDRESS =
+   DEFINED(ETHERNET_ADDRESS) ? ETHERNET_ADDRESS : 0xDEAD12;
 
 /*
  *  The following defines the order in which the sections should go.
  *  It also defines a number of variables which can be used by the
  *  application program.
  *
- *  NOTE: Each variable appears with 1 or 2 leading underscores to insure
+ *  NOTE: Each variable appears with 1 or 2 leading underscores to
- *        that the variable is accessible from C code with a single
+ *        ensure that the variable is accessible from C code with a
- *        underscore.  Some object formats automatically add a leading
+ *        single underscore.  Some object formats automatically add
- *        underscore to all C global symbols.
+ *        a leading underscore to all C global symbols.
  */
 
 SECTIONS @{

doc/bsp_howto/makefiles.t

@@ -121,13 +121,15 @@ BSP_PIECES=startup clock console timer
 CPU_PIECES=
 GENERIC_PIECES=
 
-# bummer; have to use $foreach since % pattern subst rules only replace 1x
+# bummer; have to use $foreach since % pattern subst
-OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).rel) \
+#              rules only replace 1x
+OBJS=$(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/$(piece).o) \
  $(foreach piece, $(CPU_PIECES), \
-       ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \
+   ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).o) \
  $(wildcard \
    ../../../../libcpu/$(RTEMS_CPU)/$(RTEMS_CPU_MODEL)/fpsp/$(ARCH)/fpsp.rel) \
-   $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel)
+ $(foreach piece, \
+   $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).o)
 @end example
 
 The variable @code{OBJS} is the list of "pieces" expanded to include