RTOS/rtems
1
0
Fork 0
forked from Imagelibrary/rtems
Code Pull Requests Activity

bsps: Use new APBUART register block API

Browse Source
This commit is contained in:
Sebastian Huber
2023-06-15 13:24:28 +02:00
parent 49ad450d70
commit 8fdecf6c55
9 changed files with 235 additions and 111 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
bsps/include/grlib/apbuart_termios.h
View File

@@ -34,7 +34,7 @@
#define APBUART_TERMIOS_H
#include <rtems/termiostypes.h>
#include "grlib.h"
#include "apbuart.h"
#ifdef __cplusplus
extern "C" {
@@ -42,7 +42,7 @@ extern "C" {
struct apbuart_context {
rtems_termios_device_context base;
struct apbuart_regs *regs;
apbuart *regs;
unsigned int freq_hz;
rtems_vector_number irq;
volatile int sending;

2
bsps/riscv/griscv/console/console.c
View File

@@ -82,7 +82,7 @@ static int find_matching_apbuart(struct ambapp_dev *dev, int index, void *arg)
struct ambapp_apb_info *apb = (struct ambapp_apb_info *)dev->devinfo;
/* Extract needed information of one APBUART */
apbuarts[uarts].regs = (struct apbuart_regs *)apb->start;
apbuarts[uarts].regs = (apbuart *)apb->start;
apbuarts[uarts].irq = apb->common.irq;
/* Get APBUART core frequency, it is assumed that it is the same
* as Bus frequency where the UART is situated

23
bsps/riscv/griscv/console/printk_support.c
View File

@@ -43,9 +43,10 @@
#include <stdio.h>
#include <grlib/apbuart.h>
#include <grlib/ambapp.h>
#include <grlib/io.h>
int grlib_debug_uart_index __attribute__((weak)) = 0;
struct apbuart_regs *grlib_debug_uart = NULL;
apbuart *grlib_debug_uart = NULL;
/* Before UART driver has registered (or when no UART is available), calls to
* printk that gets to bsp_out_char() will be filling data into the
@@ -87,13 +88,17 @@ static void bsp_debug_uart_init(void)
VENDOR_GAISLER, GAISLER_APBUART,
ambapp_find_by_idx, (void *)&i);
if (adev) {
uint32_t ctrl;
/* Found a matching debug console, initialize debug uart if present
* for printk
*/
apb = (struct ambapp_apb_info *)adev->devinfo;
grlib_debug_uart = (struct apbuart_regs *)apb->start;
grlib_debug_uart->ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE;
grlib_debug_uart->status = 0;
grlib_debug_uart = (apbuart *)apb->start;
ctrl = grlib_load_32(&grlib_debug_uart->ctrl);
ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE;
grlib_store_32(&grlib_debug_uart->ctrl, ctrl);
grlib_store_32(&grlib_debug_uart->status, 0);
}
}
@@ -107,10 +112,14 @@ RTEMS_SYSINIT_ITEM(
static void bsp_out_char(char c)
{
if (grlib_debug_uart == NULL) {
uint32_t ctrl;
/* Try to assign standard UART address to debug driver to pass some tests */
grlib_debug_uart = (struct apbuart_regs *) 0x80000100;
grlib_debug_uart->ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE;
grlib_debug_uart->status = 0;
grlib_debug_uart = (apbuart *) 0x80000100;
ctrl = grlib_load_32(&grlib_debug_uart->ctrl);
ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE;
grlib_store_32(&grlib_debug_uart->ctrl, ctrl);
grlib_store_32(&grlib_debug_uart->status, 0);
/* Local debug buffer when UART driver has not registered */
/*
pre_printk_dbgbuf[pre_printk_pos++] = c;

130
bsps/shared/grlib/uart/apbuart_cons.c
View File

@@ -47,11 +47,15 @@
#include <grlib/ambapp_bus.h>
#include <grlib/apbuart.h>
#include <grlib/ambapp.h>
#include <grlib/grlib.h>
#include <grlib/io.h>
#include <grlib/cons.h>
#include <rtems/termiostypes.h>
#include <grlib/apbuart_cons.h>
#ifdef LEON3
#include <bsp/leon3.h>
#endif
/*#define DEBUG 1 */
#ifdef DEBUG
@@ -60,12 +64,6 @@
#define DBG(x...)
#endif
/* LEON3 Low level transmit/receive functions provided by debug-uart code */
#ifdef LEON3
#include <leon.h>
extern struct apbuart_regs *leon3_debug_uart; /* The debug UART */
#endif
/* Probed hardware capabilities */
enum {
CAP_FIFO = 0x01, /* FIFO available */
@@ -74,7 +72,7 @@ enum {
struct apbuart_priv {
struct console_dev condev;
struct drvmgr_dev *dev;
struct apbuart_regs *regs;
apbuart *regs;
struct rtems_termios_tty *tty;
char devName[52];
volatile int sending;
@@ -213,18 +211,23 @@ static const rtems_termios_device_handler handler_polled = {
* can select appropriate routines for the hardware. probecap() return value
* is a CAP_ bitmask.
*/
static int probecap(struct apbuart_regs *regs)
static int probecap(apbuart *regs)
{
int cap = 0;
uint32_t ctrl;
/* Probe FIFO */
if (regs->ctrl & APBUART_CTRL_FA) {
ctrl = grlib_load_32(&regs->ctrl);
if (ctrl & APBUART_CTRL_FA) {
cap |= CAP_FIFO;
/* Probe RX delayed interrupt */
regs->ctrl |= APBUART_CTRL_DI;
if (regs->ctrl & APBUART_CTRL_DI) {
regs->ctrl &= ~APBUART_CTRL_DI;
ctrl |= APBUART_CTRL_DI;
grlib_store_32(&regs->ctrl, ctrl);
ctrl = grlib_load_32(&regs->ctrl);
if (ctrl & APBUART_CTRL_DI) {
ctrl &= ~APBUART_CTRL_DI;
grlib_store_32(&regs->ctrl, ctrl);
cap |= CAP_DI;
}
}
@@ -241,6 +244,7 @@ int apbuart_init1(struct drvmgr_dev *dev)
char prefix[32];
unsigned int db;
static int first_uart = 1;
uint32_t ctrl;
/* The default operation in AMP is to use APBUART[0] for CPU[0],
* APBUART[1] for CPU[1] and so on. The remaining UARTs is not used
@@ -269,10 +273,12 @@ int apbuart_init1(struct drvmgr_dev *dev)
if (ambadev == NULL)
return -1;
pnpinfo = &ambadev->info;
priv->regs = (struct apbuart_regs *)pnpinfo->apb_slv->start;
priv->regs = (apbuart *)pnpinfo->apb_slv->start;
/* Clear HW regs, leave baudrate register as it is */
priv->regs->status = 0;
grlib_store_32(&priv->regs->status, 0);
ctrl = grlib_load_32(&priv->regs->ctrl);
/* leave Transmitter/receiver if this is the RTEMS debug UART (assume
* it has been setup by boot loader).
@@ -280,7 +286,7 @@ int apbuart_init1(struct drvmgr_dev *dev)
db = 0;
#ifdef LEON3
if (priv->regs == leon3_debug_uart) {
db = priv->regs->ctrl & (APBUART_CTRL_RE |
db = ctrl & (APBUART_CTRL_RE |
APBUART_CTRL_TE |
APBUART_CTRL_PE |
APBUART_CTRL_PS);
@@ -293,12 +299,12 @@ int apbuart_init1(struct drvmgr_dev *dev)
* guess that we are debugging if FL is already set, the debugger set
* either LB or DB depending on UART capabilities.
*/
if (priv->regs->ctrl & APBUART_CTRL_FL) {
db |= priv->regs->ctrl & (APBUART_CTRL_DB |
if (ctrl & APBUART_CTRL_FL) {
db |= ctrl & (APBUART_CTRL_DB |
APBUART_CTRL_LB | APBUART_CTRL_FL);
}
priv->regs->ctrl = db;
grlib_store_32(&priv->regs->ctrl, db);
priv->cap = probecap(priv->regs);
@@ -387,12 +393,13 @@ static int apbuart_info(
sprintf(buf, "FS Name: %s", priv->condev.fsname);
print_line(p, buf);
}
sprintf(buf, "STATUS REG: 0x%x", priv->regs->status);
sprintf(buf, "STATUS REG: 0x%x", grlib_load_32(&priv->regs->status));
print_line(p, buf);
sprintf(buf, "CTRL REG: 0x%x", priv->regs->ctrl);
sprintf(buf, "CTRL REG: 0x%x", grlib_load_32(&priv->regs->ctrl));
print_line(p, buf);
sprintf(buf, "SCALER REG: 0x%x baud rate %d",
priv->regs->scaler, apbuart_get_baud(priv));
grlib_load_32(&priv->regs->scaler),
apbuart_get_baud(priv));
print_line(p, buf);
return DRVMGR_OK;
@@ -407,6 +414,8 @@ static bool first_open(
)
{
struct apbuart_priv *uart = base_get_priv(base);
apbuart *regs = uart->regs;
uint32_t ctrl;
uart->tty = tty;
@@ -418,7 +427,8 @@ static bool first_open(
}
/* Enable TX/RX */
uart->regs->ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE;
ctrl = grlib_load_32(&regs->ctrl);
ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE;
if (uart->mode != TERMIOS_POLLED) {
int ret;
@@ -435,15 +445,15 @@ static bool first_open(
uart->sending = 0;
/* Turn on RX interrupts */
ctrl = uart->regs->ctrl;
ctrl |= APBUART_CTRL_RI;
if (uart->cap & CAP_DI) {
/* Use RX FIFO interrupt only if delayed interrupt available. */
ctrl |= (APBUART_CTRL_DI | APBUART_CTRL_RF);
}
uart->regs->ctrl = ctrl;
}
grlib_store_32(&regs->ctrl, ctrl);
return true;
}
@@ -454,13 +464,16 @@ static void last_close(
)
{
struct apbuart_priv *uart = base_get_priv(base);
apbuart *regs = uart->regs;
rtems_interrupt_lock_context lock_context;
uint32_t ctrl;
if (uart->mode != TERMIOS_POLLED) {
/* Turn off RX interrupts */
rtems_termios_device_lock_acquire(base, &lock_context);
uart->regs->ctrl &=
~(APBUART_CTRL_DI | APBUART_CTRL_RI | APBUART_CTRL_RF);
ctrl = grlib_load_32(&regs->ctrl);
ctrl &= ~(APBUART_CTRL_DI | APBUART_CTRL_RI | APBUART_CTRL_RF);
grlib_store_32(&regs->ctrl, ctrl);
rtems_termios_device_lock_release(base, &lock_context);
/**** Flush device ****/
@@ -468,8 +481,8 @@ static void last_close(
/* Wait until all data has been sent */
}
while (
(uart->regs->ctrl & APBUART_CTRL_TE) &&
!(uart->regs->status & APBUART_STATUS_TS)
(grlib_load_32(&regs->ctrl) & APBUART_CTRL_TE) &&
!(grlib_load_32(&regs->status) & APBUART_STATUS_TS)
) {
/* Wait until all data has left shift register */
}
@@ -480,8 +493,11 @@ static void last_close(
#ifdef LEON3
/* Disable TX/RX if not used for DEBUG */
if (uart->regs != leon3_debug_uart)
uart->regs->ctrl &= ~(APBUART_CTRL_RE | APBUART_CTRL_TE);
if (regs != leon3_debug_uart) {
ctrl = grlib_load_32(&regs->ctrl);
ctrl &= ~(APBUART_CTRL_RE | APBUART_CTRL_TE);
grlib_store_32(&regs->ctrl, ctrl);
}
#endif
}
@@ -497,10 +513,11 @@ static int read_task(rtems_termios_device_context *base)
{
rtems_interrupt_lock_context lock_context;
struct apbuart_priv *uart = base_get_priv(base);
struct apbuart_regs *regs = uart->regs;
apbuart *regs = uart->regs;
int cnt;
char buf[33];
struct rtems_termios_tty *tty;
uint32_t ctrl;
uint32_t ctrl_add;
ctrl_add = APBUART_CTRL_RI;
@@ -511,10 +528,10 @@ static int read_task(rtems_termios_device_context *base)
do {
cnt = 0;
while (
(regs->status & APBUART_STATUS_DR) &&
(grlib_load_32(&regs->status) & APBUART_STATUS_DR) &&
(cnt < sizeof(buf))
) {
buf[cnt] = regs->data;
buf[cnt] = grlib_load_32(&regs->data);
cnt++;
}
if (0 < cnt) {
@@ -528,9 +545,11 @@ static int read_task(rtems_termios_device_context *base)
* afterwards.
*/
rtems_termios_device_lock_acquire(base, &lock_context);
regs->ctrl |= ctrl_add;
ctrl = grlib_load_32(&regs->ctrl);
ctrl |= ctrl_add;
grlib_store_32(&regs->ctrl, ctrl);
rtems_termios_device_lock_release(base, &lock_context);
} while (regs->status & APBUART_STATUS_DR);
} while (grlib_load_32(&regs->status) & APBUART_STATUS_DR);
return EOF;
}
@@ -541,7 +560,7 @@ int apbuart_get_baud(struct apbuart_priv *uart)
unsigned int scaler;
/* Get current scaler setting */
scaler = uart->regs->scaler;
scaler = grlib_load_32(&uart->regs->scaler);
/* Get APBUART core frequency */
drvmgr_freq_get(uart->dev, DEV_APB_SLV, &core_clk_hz);
@@ -576,7 +595,7 @@ static bool set_attributes(
rtems_termios_device_lock_acquire(base, &lock_context);
/* Read out current value */
ctrl = uart->regs->ctrl;
ctrl = grlib_load_32(&uart->regs->ctrl);
switch(t->c_cflag & (PARENB|PARODD)){
case (PARENB|PARODD):
@@ -603,7 +622,7 @@ static bool set_attributes(
ctrl &= ~APBUART_CTRL_FL;
/* Update new settings */
uart->regs->ctrl = ctrl;
grlib_store_32(&uart->regs->ctrl, ctrl);
rtems_termios_device_lock_release(base, &lock_context);
@@ -617,7 +636,7 @@ static bool set_attributes(
scaler = (((core_clk_hz*10)/(baud*8))-5)/10;
/* Set new baud rate by setting scaler */
uart->regs->scaler = scaler;
grlib_store_32(&uart->regs->scaler, scaler);
}
return true;
@@ -637,7 +656,7 @@ static void get_attributes(
t->c_cflag |= CS8;
/* Read out current parity */
ctrl = uart->regs->ctrl;
ctrl = grlib_load_32(&uart->regs->ctrl);
if (ctrl & APBUART_CTRL_PE) {
if (ctrl & APBUART_CTRL_PS)
t->c_cflag |= PARENB|PARODD; /* Odd parity */
@@ -673,11 +692,11 @@ static void write_interrupt(
)
{
struct apbuart_priv *uart = base_get_priv(base);
struct apbuart_regs *regs = uart->regs;
apbuart *regs = uart->regs;
int sending;
unsigned int ctrl;
ctrl = regs->ctrl;
ctrl = grlib_load_32(&regs->ctrl);
if (len > 0) {
/*
@@ -685,28 +704,30 @@ static void write_interrupt(
* we can tell termios later.
*/
/* Enable TX interrupt (interrupt is edge-triggered) */
regs->ctrl = ctrl | APBUART_CTRL_TI;
ctrl |= APBUART_CTRL_TI;
grlib_store_32(&regs->ctrl, ctrl);
if (ctrl & APBUART_CTRL_FA) {
/* APBUART with FIFO.. Fill as many as FIFO allows */
sending = 0;
while (
((regs->status & APBUART_STATUS_TF) == 0) &&
((grlib_load_32(&regs->status) & APBUART_STATUS_TF) == 0) &&
(sending < len)
) {
regs->data = *buf;
grlib_store_32(&regs->data, *buf);
buf++;
sending++;
}
} else {
/* start UART TX, this will result in an interrupt when done */
regs->data = *buf;
grlib_store_32(&regs->data, *buf);
sending = 1;
}
} else {
/* No more to send, disable TX interrupts */
regs->ctrl = ctrl & ~APBUART_CTRL_TI;
ctrl &= ~APBUART_CTRL_TI;
grlib_store_32(&regs->ctrl, ctrl);
/* Tell close that we sent everything */
sending = 0;
@@ -722,21 +743,24 @@ static void apbuart_cons_isr(void *arg)
rtems_termios_device_context *base;
struct console_dev *condev = rtems_termios_get_device_context(tty);
struct apbuart_priv *uart = condev_get_priv(condev);
struct apbuart_regs *regs = uart->regs;
apbuart *regs = uart->regs;
unsigned int status;
char buf[33];
int cnt;
if (uart->mode == TERMIOS_TASK_DRIVEN) {
if ((status = regs->status) & APBUART_STATUS_DR) {
if ((status = grlib_load_32(&regs->status)) & APBUART_STATUS_DR) {
rtems_interrupt_lock_context lock_context;
uint32_t ctrl;
/* Turn off RX interrupts */
base = rtems_termios_get_device_context(tty);
rtems_termios_device_lock_acquire(base, &lock_context);
regs->ctrl &=
ctrl = grlib_load_32(&regs->ctrl);
ctrl &=
~(APBUART_CTRL_DI | APBUART_CTRL_RI |
APBUART_CTRL_RF);
grlib_store_32(&regs->ctrl, ctrl);
rtems_termios_device_lock_release(base, &lock_context);
/* Activate termios RX daemon task */
rtems_termios_rxirq_occured(tty);
@@ -749,10 +773,10 @@ static void apbuart_cons_isr(void *arg)
*/
cnt = 0;
while (
((status=regs->status) & APBUART_STATUS_DR) &&
((status=grlib_load_32(&regs->status)) & APBUART_STATUS_DR) &&
(cnt < sizeof(buf))
) {
buf[cnt] = regs->data;
buf[cnt] = grlib_load_32(&regs->data);
cnt++;
}
if (0 < cnt) {

52
bsps/shared/grlib/uart/apbuart_polled.c
View File

@@ -1,8 +1,17 @@
/* SPDX-License-Identifier: BSD-2-Clause */
/**
* @file
*
* @ingroup RTEMSDeviceGRLIBAPBUART
*
* @brief This source file contains the implementation of
* apbuart_outbyte_wait(), apbuart_outbyte_polled(), and
* apbuart_inbyte_nonblocking().
*/
/*
* COPYRIGHT (c) 2010.
* Cobham Gaisler AB.
* Copyright (C) 2021 embedded brains GmbH & Co. KG
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -27,38 +36,37 @@
*/
#include <grlib/apbuart.h>
#include <grlib/io.h>
#include <rtems/score/cpuimpl.h>
#include <rtems/score/io.h>
void apbuart_outbyte_wait(const struct apbuart_regs *regs)
void apbuart_outbyte_wait( const apbuart *regs )
{
while ( (regs->status & APBUART_STATUS_TE) == 0 ) {
/* Lower bus utilization while waiting for UART */
_CPU_Instruction_no_operation();
_CPU_Instruction_no_operation();
_CPU_Instruction_no_operation();
_CPU_Instruction_no_operation();
_CPU_Instruction_no_operation();
_CPU_Instruction_no_operation();
_CPU_Instruction_no_operation();
_CPU_Instruction_no_operation();
while ( ( grlib_load_32( &regs->status ) & APBUART_STATUS_TE ) == 0 ) {
_IO_Relax();
}
}
void apbuart_outbyte_polled(struct apbuart_regs *regs, char ch)
void apbuart_outbyte_polled( apbuart *regs, char ch)
{
apbuart_outbyte_wait(regs);
regs->data = (uint8_t) ch;
apbuart_outbyte_wait( regs );
grlib_store_32( &regs->data, (uint8_t) ch );
}
int apbuart_inbyte_nonblocking(struct apbuart_regs *regs)
int apbuart_inbyte_nonblocking( apbuart *regs )
{
/* Clear errors */
regs->status = ~APBUART_STATUS_ERR;
uint32_t status;
if ((regs->status & APBUART_STATUS_DR) == 0) {
status = grlib_load_32( &regs->status );
/* Clear errors, writes to non-error flags are ignored */
status &= ~( APBUART_STATUS_FE | APBUART_STATUS_PE | APBUART_STATUS_OV |
APBUART_STATUS_BR );
grlib_store_32( &regs->status, status );
if ( ( status & APBUART_STATUS_DR ) == 0 ) {
return -1;
}
return (uint8_t) regs->data;
return (int) APBUART_DATA_DATA_GET( grlib_load_32( &regs->data ) );
}

49
bsps/shared/grlib/uart/apbuart_termios.c
View File

@@ -32,6 +32,7 @@
#include <grlib/apbuart_termios.h>
#include <grlib/apbuart.h>
#include <grlib/io.h>
#include <bsp.h>
static void apbuart_isr(void *arg)
@@ -42,9 +43,9 @@ static void apbuart_isr(void *arg)
char data;
/* Get all received characters */
while ((status=uart->regs->status) & APBUART_STATUS_DR) {
while ((status=grlib_load_32(&uart->regs->status)) & APBUART_STATUS_DR) {
/* Data has arrived, get new data */
data = uart->regs->data;
data = (char)grlib_load_32(&uart->regs->data);
/* Tell termios layer about new character */
rtems_termios_enqueue_raw_characters(tty, &data, 1);
@@ -52,7 +53,7 @@ static void apbuart_isr(void *arg)
if (
(status & APBUART_STATUS_TE)
&& (uart->regs->ctrl & APBUART_CTRL_TI) != 0
&& (grlib_load_32(&uart->regs->ctrl) & APBUART_CTRL_TI) != 0
) {
/* write_interrupt will get called from this function */
rtems_termios_dequeue_characters(tty, 1);
@@ -67,23 +68,27 @@ static void apbuart_write_support(
{
struct apbuart_context *uart = (struct apbuart_context *) base;
int sending;
uint32_t ctrl;
ctrl = grlib_load_32(&uart->regs->ctrl);
if (len > 0) {
/* Enable TX interrupt (interrupt is edge-triggered) */
uart->regs->ctrl |= APBUART_CTRL_TI;
ctrl |= APBUART_CTRL_TI;
/* start UART TX, this will result in an interrupt when done */
uart->regs->data = *buf;
grlib_store_32(&uart->regs->data, (uint8_t)*buf);
sending = 1;
} else {
/* No more to send, disable TX interrupts */
uart->regs->ctrl &= ~APBUART_CTRL_TI;
ctrl &= ~APBUART_CTRL_TI;
/* Tell close that we sent everything */
sending = 0;
}
grlib_store_32(&uart->regs->ctrl, ctrl);
uart->sending = sending;
}
@@ -134,7 +139,7 @@ static bool apbuart_set_attributes(
rtems_termios_device_lock_acquire(base, &lock_context);
/* Read out current value */
ctrl = uart->regs->ctrl;
ctrl = grlib_load_32(&uart->regs->ctrl);
switch (t->c_cflag & (PARENB|PARODD)) {
case (PARENB|PARODD):
@@ -162,7 +167,7 @@ static bool apbuart_set_attributes(
}
/* Update new settings */
uart->regs->ctrl = ctrl;
grlib_store_32(&uart->regs->ctrl, ctrl);
rtems_termios_device_lock_release(base, &lock_context);
@@ -173,7 +178,7 @@ static bool apbuart_set_attributes(
scaler = (((uart->freq_hz * 10) / (baud * 8)) - 5) / 10;
/* Set new baud rate by setting scaler */
uart->regs->scaler = scaler;
grlib_store_32(&uart->regs->scaler, scaler);
}
return true;
@@ -184,7 +189,8 @@ static void apbuart_set_best_baud(
struct termios *term
)
{
uint32_t baud = (uart->freq_hz * 10) / ((uart->regs->scaler * 10 + 5) * 8);
uint32_t baud = (uart->freq_hz * 10) /
((grlib_load_32(&uart->regs->scaler) * 10 + 5) * 8);
rtems_termios_set_best_baud(term, baud);
}
@@ -197,12 +203,15 @@ static bool apbuart_first_open_polled(
)
{
struct apbuart_context *uart = (struct apbuart_context *) base;
uint32_t ctrl;
apbuart_set_best_baud(uart, term);
/* Initialize UART on opening */
uart->regs->ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE;
uart->regs->status = 0;
ctrl = grlib_load_32(&uart->regs->ctrl);
ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE;
grlib_store_32(&uart->regs->ctrl, ctrl);
grlib_store_32(&uart->regs->status, 0);
return true;
}
@@ -216,6 +225,7 @@ static bool apbuart_first_open_interrupt(
{
struct apbuart_context *uart = (struct apbuart_context *) base;
rtems_status_code sc;
uint32_t ctrl;
apbuart_set_best_baud(uart, term);
@@ -229,11 +239,13 @@ static bool apbuart_first_open_interrupt(
uart->sending = 0;
/* Enable Receiver and transmitter and Turn on RX interrupts */
uart->regs->ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE |
APBUART_CTRL_RI;
ctrl = grlib_load_32(&uart->regs->ctrl);
ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE | APBUART_CTRL_RI;
grlib_store_32(&uart->regs->ctrl, ctrl);
/* Initialize UART on opening */
uart->regs->ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE;
uart->regs->status = 0;
ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE;
grlib_store_32(&uart->regs->ctrl, ctrl);
grlib_store_32(&uart->regs->status, 0);
return true;
}
@@ -246,10 +258,13 @@ static void apbuart_last_close_interrupt(
{
struct apbuart_context *uart = (struct apbuart_context *) base;
rtems_interrupt_lock_context lock_context;
uint32_t ctrl;
/* Turn off RX interrupts */
rtems_termios_device_lock_acquire(base, &lock_context);
uart->regs->ctrl &= ~(APBUART_CTRL_RI);
ctrl = grlib_load_32(&uart->regs->ctrl);
ctrl &= ~APBUART_CTRL_RI;
grlib_store_32(&uart->regs->ctrl, ctrl);
rtems_termios_device_lock_release(base, &lock_context);
/**** Flush device ****/

2
bsps/sparc/leon3/console/console.c
View File

@@ -81,7 +81,7 @@ static int find_matching_apbuart(struct ambapp_dev *dev, int index, void *arg)
struct ambapp_apb_info *apb = (struct ambapp_apb_info *)dev->devinfo;
/* Extract needed information of one APBUART */
apbuarts[uarts].regs = (struct apbuart_regs *)apb->start;
apbuarts[uarts].regs = (apbuart *)apb->start;
apbuarts[uarts].irq = apb->common.irq;
/* Get APBUART core frequency, it is assumed that it is the same
* as Bus frequency where the UART is situated

16
bsps/sparc/leon3/console/printk_support.c
View File

@@ -35,14 +35,17 @@
*/
#include <bsp.h>
#include <leon.h>
#include <bsp/leon3.h>
#include <rtems/bspIo.h>
#include <rtems/sysinit.h>
#include <rtems/score/thread.h>
#include <grlib/apbuart.h>
#include <grlib/io.h>
#include <grlib/ambapp.h>
int leon3_debug_uart_index __attribute__((weak)) = 0;
struct apbuart_regs *leon3_debug_uart = NULL;
apbuart *leon3_debug_uart = NULL;
static void bsp_debug_uart_init(void);
@@ -105,15 +108,18 @@ static void bsp_debug_uart_init(void)
ambapp_find_by_idx, (void *)&i);
if (adev != NULL) {
struct ambapp_apb_info *apb;
uint32_t ctrl;
/*
* Found a matching debug console, initialize debug UART if present for
* printk().
*/
apb = (struct ambapp_apb_info *)adev->devinfo;
leon3_debug_uart = (struct apbuart_regs *)apb->start;
leon3_debug_uart->ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE;
leon3_debug_uart->status = 0;
leon3_debug_uart = (apbuart *)apb->start;
ctrl = grlib_load_32(&leon3_debug_uart->ctrl);
ctrl |= APBUART_CTRL_RE | APBUART_CTRL_TE;
grlib_store_32(&leon3_debug_uart->ctrl, ctrl);
grlib_store_32(&leon3_debug_uart->status, 0);
BSP_poll_char = bsp_debug_uart_poll_char;
BSP_output_char = bsp_debug_uart_output_char;

62
bsps/sparc/leon3/include/bsp/leon3.h Normal file
View File

@@ -0,0 +1,62 @@
/* SPDX-License-Identifier: BSD-2-Clause */
/**
* @file
*
* @ingroup RTEMSBSPsSPARCLEON3
*
* @brief This header file provides interfaces used by the BSP implementation.
*/
/*
* Copyright (C) 2021 embedded brains GmbH & Co. KG
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef LIBBSP_SPARC_LEON3_BSP_LEON3_H
#define LIBBSP_SPARC_LEON3_BSP_LEON3_H
#include <grlib/apbuart-regs.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @addtogroup RTEMSBSPsSPARCLEON3
*
* @{
*/
/**
* @brief This pointer provides the debug APBUART register block address.
*/
extern apbuart *leon3_debug_uart;
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* LIBBSP_SPARC_LEON3_BSP_LEON3_H */