Use correct prototype of benchmark_timer_read()

This change starts with removing the effectively empty file
timerdrv.h. The prototypes for benchmark_timer_XXX() were in
btimer.h which was not universally used. Thus every use of
timerdrv.h had to be changed to btimer.h. Then the prototypes
for benchmark_timer_read() had to be adjusted to return
benchmark_timer_t rather than int or uint32_t.

I took this opportunity to also correct the file headers to
separate the copyright from the file description comments which
is needed to ensure the copyright isn't propagated into Doxygen
output.

c/src/lib/libbsp/arm/edb7312/timer/timer.c

@@ -46,7 +46,7 @@ void benchmark_timer_initialize( void )
                              /* This value is in microseconds. */
 #define LEAST_VALID       1  /* Don't trust a clicks value lower than this */
 
-uint32_t benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint16_t         t;
   uint32_t         total;

c/src/lib/libbsp/arm/gba/timer/timer.c

@@ -94,7 +94,7 @@ void benchmark_timer_initialize( void )
  *  @param  None
  *  @return Timer value in microseconds
  */
-uint32_t benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint32_t  ticks;
   uint32_t  total;

c/src/lib/libbsp/arm/lpc176x/benchmark_timer/benchmark_timer.c

@@ -32,7 +32,7 @@ void benchmark_timer_initialize( void )
   benchmark_timer_base = lpc176x_timer_get_timer_value( LPC176X_TIMER_1 );
 }
 
-uint32_t benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint32_t delta = lpc176x_timer_get_timer_value( LPC176X_TIMER_1 ) -
                    benchmark_timer_base;

c/src/lib/libbsp/arm/lpc24xx/misc/timer.c

@@ -22,7 +22,6 @@
 #include <rtems.h>
 #include <bsp.h>
 #include <rtems/btimer.h>
-#include <rtems/timerdrv.h>
 
 #include <bsp/system-clocks.h>
 
@@ -35,7 +34,7 @@ void benchmark_timer_initialize(void)
   benchmark_timer_base = lpc24xx_timer();
 }
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t delta = lpc24xx_timer() - benchmark_timer_base;
 

c/src/lib/libbsp/arm/lpc32xx/misc/timer.c

@@ -21,7 +21,6 @@
 
 #include <rtems.h>
 #include <rtems/btimer.h>
-#include <rtems/timerdrv.h>
 
 #include <bsp.h>
 
@@ -32,7 +31,7 @@ void benchmark_timer_initialize(void)
   benchmark_timer_base = lpc32xx_timer();
 }
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   return lpc32xx_timer() - benchmark_timer_base;
 }

c/src/lib/libbsp/arm/raspberrypi/misc/timer.c

@@ -17,7 +17,7 @@
  */
 
 #include <rtems.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include <bsp/raspberrypi.h>
 
 static bool benchmark_timer_find_average_overhead = false;
@@ -29,7 +29,7 @@ void benchmark_timer_initialize(void)
   benchmark_timer_base = BCM2835_REG(BCM2835_GPU_TIMER_CLO);
 }
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t delta = BCM2835_REG(BCM2835_GPU_TIMER_CLO) - benchmark_timer_base;
 

c/src/lib/libbsp/arm/tms570/clock/benchmark_timer.c

@@ -28,7 +28,6 @@
 #include <bsp.h>
 #include <bsp/system-clocks.h>
 #include <rtems/btimer.h>
-#include <rtems/timerdrv.h>
 
 bool benchmark_timer_find_average_overhead = false;
 
@@ -39,7 +38,7 @@ void benchmark_timer_initialize(void)
   benchmark_timer_base = _CPU_Counter_read();
 }
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t delta = _CPU_Counter_read() - benchmark_timer_base;
 

c/src/lib/libbsp/i386/pc386/timer/timer.c

@@ -52,7 +52,7 @@ bool                      benchmark_timer_find_average_overhead = true;
 volatile unsigned int     fastLoop1ms, slowLoop1ms;
 
 void              (*benchmark_timer_initialize_function)(void) = 0;
-uint32_t (*benchmark_timer_read_function)(void) = 0;
+benchmark_timer_t (*benchmark_timer_read_function)(void) = 0;
 void              (*Timer_exit_function)(void) = 0;
 
 /* timer (int 08h) Interrupt Service Routine (defined in 'timerisr.s') */

c/src/lib/libbsp/lm32/shared/milkymist_timer/timer.c

@@ -47,7 +47,7 @@ void benchmark_timer_initialize(void)
                              /* This value is in microseconds. */
 #define LEAST_VALID       4  /* Don't trust a clicks value lower than this */
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t ticks;
   uint32_t total;

c/src/lib/libbsp/lm32/shared/timer/timer.c

@@ -76,7 +76,7 @@ void benchmark_timer_initialize( void )
                              /* This value is in microseconds. */
 #define LEAST_VALID       4  /* Don't trust a clicks value lower than this */
 
-uint32_t benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint32_t ticks;
   uint32_t total;

c/src/lib/libbsp/m32c/m32cbsp/timer/timer.c

@@ -41,7 +41,7 @@ void benchmark_timer_initialize(void)
   TABSR = 0x55;
 }
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t count;
 

c/src/lib/libbsp/m68k/gen68302/timer/timer.c

@@ -64,7 +64,7 @@ void benchmark_timer_initialize( void )
 /*
  * Return timer value in 1/2-microsecond units
  */
-uint32_t benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint16_t         clicks;
   uint32_t         total;

c/src/lib/libbsp/m68k/idp/timer/timer.c

@@ -49,7 +49,7 @@ void benchmark_timer_initialize(void)
 #define AVG_OVERHEAD      9  /* may not be right -- do this later */
 #define LEAST_VALID       10 /* Don't trust a value lower than this */
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint8_t         data;
   uint8_t          msb, osb, lsb;

c/src/lib/libbsp/m68k/mcf52235/timer/timer.c

@@ -29,7 +29,7 @@ void benchmark_timer_initialize(void)
 /*
  * Return timer value in microsecond units
  */
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   return MCF_DTIM3_DTCN;
 }

c/src/lib/libbsp/m68k/mcf5225x/timer/timer.c

@@ -29,7 +29,7 @@ void benchmark_timer_initialize(void)
 /*
  * Return timer value in microsecond units
  */
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   return MCF_DTIM3_DTCN;
 }

c/src/lib/libbsp/m68k/mcf5329/timer/timer.c

@@ -29,7 +29,7 @@ void benchmark_timer_initialize(void)
 /*
  * Return timer value in microsecond units
  */
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   return MCF_DTIM3_DTCN;
 }

c/src/lib/libbsp/m68k/mrm332/timer/timer.c

@@ -38,7 +38,7 @@ void benchmark_timer_initialize( void )
 /*
  * Return timer value in 1/2-microsecond units
  */
-uint32_t benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint32_t         total;
   total = 0;

c/src/lib/libbsp/m68k/mvme136/timer/timer.c

@@ -50,7 +50,7 @@ void benchmark_timer_initialize(void)
                              /* (6 countdowns) to start/stop the timer. */
 #define LEAST_VALID       10 /* Don't trust a value lower than this */
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
 /*
   uint8_t          msb, lsb;

c/src/lib/libbsp/m68k/mvme147/timer/timer.c

@@ -45,7 +45,7 @@ void benchmark_timer_initialize(void)
 				synchronized whith the counter updates*/
 #define LEAST_VALID       10 /* Don't trust a value lower than this */
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t         total;
   uint16_t         counter_value;

c/src/lib/libbsp/m68k/mvme162/timer/timer.c

@@ -50,7 +50,7 @@ void benchmark_timer_initialize(void)
                                 /* (3 countdowns) to start/stop the timer. */
 #define LEAST_VALID       10U   /* Don't trust a value lower than this */
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t            total;
 

c/src/lib/libbsp/m68k/mvme167/timer/timer.c

@@ -1,11 +1,13 @@
-/*  timer.c
+/**
+ * @file
  *
  * This file manages the benchmark timer used by the RTEMS Timing Test Suite.
- *  Each measured time period is demarcated by calls to benchmark_timer_initialize() and
- *  benchmark_timer_read().  benchmark_timer_read() usually returns the number of microseconds
+ * Each measured time period is demarcated by calls to
+ * benchmark_timer_initialize() and benchmark_timer_read().
+ * benchmark_timer_read() usually returns the number of microseconds
  * since benchmark_timer_initialize() exitted.
  *
- *  These functions are prototyped in rtems/c/src/lib/include/timerdrv.h and
+ * These functions are prototyped in rtems/btimer.h and
  * must be implemented as part of the BSP.
  *
  * This port does not allow the application to select which timer on the
@@ -16,7 +18,9 @@
  * All page references are to the MVME166/MVME167/MVME187 Single Board
  * Computer Programmer's Reference Guide (MVME187PG/D2) with the April 1993
  *  supplements/addenda (MVME187PG/D2A1).
- *
+ */
+
+/*
  *  COPYRIGHT (c) 1989-1999.
  *  On-Line Applications Research Corporation (OAR).
  *
@@ -104,7 +108,7 @@ void benchmark_timer_initialize(void)
  *  LEAST_VALID is the lowest number this routine should trust.  Numbers
  *  below this are "noise" and zero is returned.
  */
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t            total;
 

c/src/lib/libbsp/m68k/mvme167/timer/timerisr.S

@@ -1,14 +1,13 @@
-/*  timer_isr()
+/**
+ *  @file
  *
  *  This ISR is used to bump a count of interval "overflow" interrupts which
  *  have occurred since the timer was started. The number of overflows is taken
  *  into account in the benchmark_timer_read() routine.
- *
- *  Input parameters:  NONE
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
+ */
+
+/*
+ *  COPYRIGHT (c) 1989-2014.
  *  On-Line Applications Research Corporation (OAR).
  *
  *  The license and distribution terms for this file may be

c/src/lib/libbsp/m68k/ods68302/timer/timer.c

@@ -67,7 +67,7 @@ void benchmark_timer_initialize( void )
 /*
  * Return timer value in 1/2-microsecond units
  */
-uint32_t benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint16_t         clicks;
   uint32_t         total;

c/src/lib/libbsp/mips/csb350/timer/timer.c

@@ -29,7 +29,7 @@ void benchmark_timer_initialize(void)
 #define LEAST_VALID       1  /* Don't trust a value lower than this */
                              /* tx39 simulator can count instructions. :) */
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t  total;
   uint32_t  cnt;

c/src/lib/libbsp/mips/genmongoosev/timer/timer.c

@@ -55,7 +55,7 @@ void benchmark_timer_initialize(void)
                              /* mongoose-v can count cycles. :) */
 #include <rtems/bspIo.h>
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t          clicks;
   uint32_t          total;

c/src/lib/libbsp/mips/jmr3904/timer/timer.c

@@ -44,7 +44,7 @@ void benchmark_timer_initialize(void)
 #define LEAST_VALID       1  /* Don't trust a value lower than this */
                              /* tx39 simulator can count instructions. :) */
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t          total;
 

c/src/lib/libbsp/nios2/nios2_iss/timer/timer.c

@@ -94,7 +94,7 @@ void benchmark_timer_initialize( void )
 
 #define LEAST_VALID AVG_OVERHEAD /* Don't trust a value lower than this */
 
-uint32_t benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint32_t timer_wraps;
   uint32_t timer_snap;

c/src/lib/libbsp/no_cpu/no_bsp/timer/timer.c

@@ -53,7 +53,7 @@ void benchmark_timer_initialize( void )
                              /* This value is in microseconds. */
 #define LEAST_VALID       1  /* Don't trust a clicks value lower than this */
 
-uint32_t benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint32_t         clicks;
   uint32_t         total;

c/src/lib/libbsp/no_cpu/no_bsp/timer/timerisr.c

@@ -1,4 +1,5 @@
-/*  timerisr.s
+/**
+ *  @file
  *
  *  If required this ISR is used to bump a count of interval "overflow"
  *  interrupts which have occurred since the timer was started.  The
@@ -9,10 +10,12 @@
  *  handler you can write.  This should be the only interrupt which can
  *  occur during the measured time period.
  *
- *  NOTE:  This file is USUALLY in assembly and is LEAN AND MEAN.
+ *  @note This file is USUALLY in assembly and is LEAN AND MEAN.
  *        Any code in this isr is pure overhead which can perturb
  *        the accuracy of the Timing Test Suite.
- *
+ */
+
+/*
  *  COPYRIGHT (c) 1989-1999.
  *  On-Line Applications Research Corporation (OAR).
  *
@@ -22,6 +25,7 @@
  */
 
 #include <rtems.h>
+#include <rtems/btimer.h>
 
 extern uint32_t         _Timer_interrupts;
 

c/src/lib/libbsp/or1k/or1ksim/timer/timer.c

@@ -32,7 +32,7 @@ void benchmark_timer_initialize(void)
 #define AVG_OVERHEAD  0
 #define LEAST_VALID   1
 
-uint32_t benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint64_t         clicks;
   uint64_t         total;

c/src/lib/libbsp/powerpc/score603e/timer/timer.c

@@ -42,7 +42,7 @@ void benchmark_timer_initialize()
  *  benchmark_timer_read
  */
 
-uint32_t benchmark_timer_read()
+benchmark_timer_t benchmark_timer_read()
 {
   uint64_t          clicks;
   uint64_t          total64;

c/src/lib/libbsp/powerpc/tqm8xx/timer/timer.c

@@ -85,7 +85,7 @@ benchmark_timer_initialize (void)
 /*
  * Return timer value in microsecond units
  */
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t retval;
   retval = *(uint32_t*)&m8xx.tcn1;

c/src/lib/libbsp/shared/timerstub.c

@@ -15,7 +15,7 @@ void benchmark_timer_initialize(void)
 {
 }
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   if (benchmark_timer_find_average_overhead)
     return 1;

c/src/lib/libbsp/sparc/erc32/timer/timer.c

@@ -62,7 +62,7 @@ void benchmark_timer_initialize(void)
 #define LEAST_VALID      13  /* Don't trust a value lower than this */
 #endif
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t          total;
 

c/src/lib/libbsp/sparc/leon2/timer/timer.c

@@ -58,7 +58,7 @@ void benchmark_timer_initialize(void)
                              /*     to start/stop the timer. */
 #define LEAST_VALID       2  /* Don't trust a value lower than this */
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t total;
 

c/src/lib/libbsp/sparc/leon3/timer/timer.c

@@ -57,7 +57,7 @@ void benchmark_timer_initialize(void)
                              /*     to start/stop the timer. */
 #define LEAST_VALID       2  /* Don't trust a value lower than this */
 
-uint32_t benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t total;
 

c/src/lib/libcpu/arm/at91rm9200/timer/timer.c

@@ -1,26 +1,21 @@
-/*
- * Cogent CSB337 Timer driver
+/**
+ * @file
+ * @brief Cogent CSB337 Timer driver
  *
  * This uses timer 0 for timing measurments.
- *
+ */
+
+/*
  *  Copyright (c) 2004 by Jay Monkman <jtm@lopingdog.com>
  *
  *  The license and distribution terms for this file may be
  *  found in the file LICENSE in this distribution or at
  *  http://www.rtems.org/license/LICENSE.
- *
- * Notes:
- *  This file manages the benchmark timer used by the RTEMS Timing Test
- *  Suite.  Each measured time period is demarcated by calls to
- *  benchmark_timer_initialize() and benchmark_timer_read().  benchmark_timer_read() usually returns
- *  the number of microseconds since benchmark_timer_initialize() exitted.
- *
- *  It is important that the timer start/stop overhead be determined
- *  when porting or modifying this code.
  */
 
-#include <rtems.h>
 #include <bsp.h>
+#include <rtems.h>
+#include <rtems/btimer.h>
 #include <at91rm9200.h>
 #include <at91rm9200_pmc.h>
 
@@ -63,7 +58,7 @@ void benchmark_timer_initialize( void )
                              /* This value is in microseconds. */
 #define LEAST_VALID       1  /* Don't trust a clicks value lower than this */
 
-int benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint16_t t;
   uint32_t total;

c/src/lib/libcpu/arm/lpc22xx/timer/timer.c

@@ -1,28 +1,24 @@
-/*
- * RTL22xx board Timer driver
+/**
+ * @file
+ * @brief RTL22xx board Timer driver
  *
  * This uses Timer1 for timing measurments.
- *
- *  By Ray xu<rayx.cn@gmail.com>, modify form Mc9328mxl	RTEMS DSP
+ */
+
+/*
+ * By Ray Xu <rayx.cn@gmail.com>, modify form Mc9328mxl RTEMS DSP
  *
  * The license and distribution terms for this file may be
  * found in the file LICENSE in this distribution or at
  * http://www.rtems.org/license/LICENSE.
- *
- * Notes:
- *  This file manages the benchmark timer used by the RTEMS Timing Test
- *  Suite.  Each measured time period is demarcated by calls to
- *  benchmark_timer_initialize() and benchmark_timer_read().  benchmark_timer_read() usually returns
- *  the number of microseconds since benchmark_timer_initialize() exitted.
- *
- *  It is important that the timer start/stop overhead be determined
- *  when porting or modifying this code.
  */
 
-#include <rtems.h>
 #include <bsp.h>
+#include <rtems.h>
+#include <rtems/btimer.h>
 #include <lpc22xx.h>
 #include "lpc_timer.h"
+
 uint32_t g_start;
 uint32_t g_freq;
 
@@ -52,7 +48,7 @@ void benchmark_timer_initialize( void )
                              /* This value is in microseconds. */
 #define LEAST_VALID       1  /* Don't trust a clicks value lower than this */
 
-int benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   return (T0TC/(LPC22xx_Fpclk/1000000));
   /*

c/src/lib/libcpu/arm/mc9328mxl/timer/timer.c

@@ -1,27 +1,22 @@
-/*
- * Cogent CSB336 Timer driver
+/**
+ *  @file
+ *  @brief Cogent CSB336 Timer driver
  *
  * This uses timer 2 for timing measurments.
- *
+ */
+
+/*
  * Copyright (c) 2004 Cogent Computer Systems
  *        Written by Jay Monkman <jtm@lopingdog.com>
  *
  *  The license and distribution terms for this file may be
  *  found in the file LICENSE in this distribution or at
  *  http://www.rtems.org/license/LICENSE.
- *
- * Notes:
- *  This file manages the benchmark timer used by the RTEMS Timing Test
- *  Suite.  Each measured time period is demarcated by calls to
- *  benchmark_timer_initialize() and benchmark_timer_read().  benchmark_timer_read() usually returns
- *  the number of microseconds since benchmark_timer_initialize() exitted.
- *
- *  It is important that the timer start/stop overhead be determined
- *  when porting or modifying this code.
  */
 
 #include <rtems.h>
 #include <bsp.h>
+#include <rtems/btimer.h>
 #include <mc9328mxl.h>
 
 uint32_t g_start;
@@ -62,7 +57,7 @@ void benchmark_timer_initialize( void )
                              /* This value is in microseconds. */
 #define LEAST_VALID       1  /* Don't trust a clicks value lower than this */
 
-int benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint32_t t;
   unsigned long long total;

c/src/lib/libcpu/arm/pxa255/timer/timer.c

@@ -1,23 +1,20 @@
+/**
+ * @file
+ * @brief PXA255 timer
+ */
+
 /*
  * PXA255 timer by Yang Xi <hiyangxi@gmail.com>
  * Copyright (c) 2004 by Jay Monkman <jtm@lopingdog.com>
  *
- * Notes:
- *  This file manages the benchmark timer used by the RTEMS Timing Test
- *  Suite.  Each measured time period is demarcated by calls to
- *  Timer_initialize() and Read_timer().  Read_timer() usually returns
- *  the number of microseconds since Timer_initialize() exitted.
- *
- *  It is important that the timer start/stop overhead be determined
- *  when porting or modifying this code.
- *
  * The license and distribution terms for this file may be
  * found in the file LICENSE in this distribution or at
  * http://www.rtems.org/license/LICENSE.
  */
 
-#include <rtems.h>
 #include <bsp.h>
+#include <rtems.h>
+#include <rtems/btimer.h>
 #include <pxa255.h>
 
 uint32_t tstart;
@@ -51,7 +48,7 @@ void benchmark_timer_initialize(void)
                              /* This value is in microseconds. */
 #define LEAST_VALID       1  /* Don't trust a clicks value lower than this */
 
-int benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
 
   uint32_t total;

c/src/lib/libcpu/arm/s3c24xx/timer/timer.c

@@ -1,24 +1,19 @@
-/*
- * S3C2400 Timer driver
+/**
+ * @file
+ * @brief S3C2400 Timer driver
  *
  * This uses timer 1 for timing measurments.
- *
+ */
+
+/*
  * The license and distribution terms for this file may be
  * found in the file LICENSE in this distribution or at
  * http://www.rtems.org/license/LICENSE.
- *
- * Notes:
- *  This file manages the benchmark timer used by the RTEMS Timing Test
- *  Suite.  Each measured time period is demarcated by calls to
- *  benchmark_timer_initialize() and benchmark_timer_read().  benchmark_timer_read() usually returns
- *  the number of microseconds since benchmark_timer_initialize() exitted.
- *
- *  It is important that the timer start/stop overhead be determined
- *  when porting or modifying this code.
  */
 
-#include <rtems.h>
 #include <bsp.h>
+#include <rtems.h>
+#include <rtems/btimer.h>
 #include <s3c24xx.h>
 
 uint32_t g_start;
@@ -69,7 +64,7 @@ void benchmark_timer_initialize( void )
                              /* This value is in microseconds. */
 #define LEAST_VALID       1  /* Don't trust a clicks value lower than this */
 
-int benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
     uint32_t t;
     unsigned long long total;

c/src/lib/libcpu/bfin/timer/timer.c

@@ -1,10 +1,15 @@
-/*  Timer for Blackfin
+/**
+ *  @file
+ *  @brief Timer for Blackfin
  *
  *  This file manages the benchmark timer used by the RTEMS Timing Test
  *  Suite.  Each measured time period is demarcated by calls to
- *  benchmark_timer_initialize() and benchmark_timer_read().  benchmark_timer_read() usually returns
- *  the number of microseconds since benchmark_timer_initialize() exitted.
- *
+ *  benchmark_timer_initialize() and benchmark_timer_read().
+ *  benchmark_timer_read() usually returns the number of microseconds
+ *  since benchmark_timer_initialize() exitted.
+ */
+
+/*
  *  Copyright (c) 2006 by Atos Automacao Industrial Ltda.
  *             written by Alain Schaefer <alain.schaefer@easc.ch>
  *                    and Antonio Giovanini <antonio@atos.com.br>
@@ -14,10 +19,9 @@
  *  http://www.rtems.org/license/LICENSE.
  */
 
-
 #include <rtems.h>
 #include <bsp.h>
-
+#include <rtems/btimer.h>
 
 uint32_t  Timer_interrupts;
 bool      benchmark_timer_find_average_overhead;
@@ -56,7 +60,7 @@ void benchmark_timer_initialize( void )
                              /* This value is in microseconds. */
 #define LEAST_VALID       1  /* Don't trust a clicks value lower than this */
 
-int benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint32_t          clicks;
   uint32_t          total;

c/src/lib/libcpu/m68k/mcf5206/timer/timer.c

@@ -1,8 +1,11 @@
-/*
- *  Timer Init
+/**
+ *  @file
+ *  @brief Timer Init
  *
  *  This module initializes TIMER 2 for on the MCF5206E for benchmarks.
- *
+ */
+
+/*
  *  Copyright (C) 2000 OKTET Ltd., St.-Petersburg, Russia
  *  Author: Victor V. Vengerov <vvv@oktet.ru>
  *
@@ -21,6 +24,7 @@
 
 #include <rtems.h>
 #include <bsp.h>
+#include <rtems/btimer.h>
 #include "mcf5206/mcf5206e.h"
 
 #define TRR2_VAL 65530
@@ -99,7 +103,7 @@ benchmark_timer_initialize(void)
  * RETURNS:
  *     number of microseconds since timer has been started
  */
-int
+benchmark_timer_t
 benchmark_timer_read( void )
 {
     uint16_t   clicks;

c/src/lib/libcpu/m68k/mcf5206/timer/timerisr.S

@@ -1,5 +1,6 @@
-/*
- *  Handle MCF5206 TIMER2 interrupts.
+/**
+ *  @file
+ *  @brief Handle MCF5206 TIMER2 interrupts
  *
  * All code in this routine is pure overhead which can perturb the
  * accuracy of RTEMS' timing test suite.
@@ -11,7 +12,9 @@
  * occur during the measured time period.
  *
  * An external counter, Timer_interrupts, is incremented.
- *
+ */
+
+/*
  *  Copyright (C) 2000 OKTET Ltd., St.-Petersburg, Russia
  *  Author: Victor V. Vengerov <vvv@oktet.ru>
  *
@@ -29,7 +32,7 @@
  */
 
 #include <rtems/asm.h>
-#include "bsp.h"
+#include <bsp.h>
 #include "mcf5206/mcf5206e.h"
 
 BEGIN_CODE

c/src/lib/libcpu/m68k/mcf5272/timer/timer.c

@@ -1,8 +1,10 @@
-/*
- *  Timer Init
+/**
+ *  @file
  *
  *  This module initializes TIMER 2 for on the MCF5272 for benchmarks.
- *
+ */
+
+/*
  *  Copyright (C) 2000 OKTET Ltd., St.-Petersburg, Russia
  *  Author: Victor V. Vengerov <vvv@oktet.ru>
  *
@@ -22,6 +24,7 @@
 #include <rtems.h>
 #include <bsp.h>
 #include <mcf5272/mcf5272.h>
+#include <rtems/btimer.h>
 
 #define TRR2_VAL 65530
 
@@ -102,7 +105,7 @@ benchmark_timer_initialize(void)
  * RETURNS:
  *     number of microseconds since timer has been started
  */
-int
+benchmark_timer_t
 benchmark_timer_read( void )
 {
     uint16_t clicks;

c/src/lib/libcpu/m68k/mcf5272/timer/timerisr.S

@@ -1,5 +1,6 @@
-/*
- *  Handle MCF5272 TIMER2 interrupts.
+/**
+ * @file
+ * @brief Handle MCF5272 TIMER2 interrupts.
  *
  * All code in this routine is pure overhead which can perturb the
  * accuracy of RTEMS' timing test suite.
@@ -11,7 +12,9 @@
  * occur during the measured time period.
  *
  * An external counter, Timer_interrupts, is incremented.
- *
+ */
+
+/*
  *  Copyright (C) 2000 OKTET Ltd., St.-Petersburg, Russia
  *  Author: Victor V. Vengerov <vvv@oktet.ru>
  *
@@ -30,9 +33,6 @@
 
 #include <rtems/asm.h>
 #include <bsp.h>
-/*
-#include "mcf5272/mcf5272.h"
-*/
 
 BEGIN_CODE
 	PUBLIC(timerisr)

c/src/lib/libcpu/mips/timer/timer.c

@@ -1,7 +1,12 @@
-/*  timer.c
- *
- *  This file contains the initialization code for the IDT 4650 timer driver.
+/**
+ *  @file
+ *  @brief IDT 4650 Timer Driver.
  *
+ *  This file manages the benchmark timer used by the RTEMS Timing Test
+ *  Suite.
+ */
+
+/*
  *  Author:     Craig Lebakken <craigl@transition.com>
  *
  *  COPYRIGHT (c) 1996 by Transition Networks Inc.
@@ -19,14 +24,6 @@
  *
  *  derived from src/lib/libbsp/no_cpu/no_bsp/timer/timer.c
  *
- *  This file manages the benchmark timer used by the RTEMS Timing Test
- *  Suite.  Each measured time period is demarcated by calls to
- *  benchmark_timer_initialize() and benchmark_timer_read().  benchmark_timer_read() usually returns
- *  the number of microseconds since benchmark_timer_initialize() exitted.
- *
- *  NOTE: It is important that the timer start/stop overhead be
- *        determined when porting or modifying this code.
- *
  *  COPYRIGHT (c) 1989-1999.
  *  On-Line Applications Research Corporation (OAR).
  *
@@ -35,15 +32,8 @@
  *  http://www.rtems.org/license/LICENSE.
  */
 
-/*
- *  Rather than deleting this, it is commented out to (hopefully) help
- *  the submitter send updates.
- *
- *  static char _sccsid[] = "@(#)timer.c 08/20/96     1.5\n";
- */
-
-
 #include <rtems.h>
+#include <rtems/btimer.h>
 
 #define CLOCKS_PER_MICROSECOND ( CPU_CLOCK_RATE_MHZ )
 #define TIMER_MAX_VALUE 0xffffffff
@@ -78,7 +68,7 @@ void benchmark_timer_initialize( void )
                              /* This value is in cycles. */
 #define LEAST_VALID       1  /* Don't trust a clicks value lower than this */
 
-int benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint64_t   clicks;
   uint32_t   total;

c/src/lib/libcpu/powerpc/mpc505/timer/timer.c

@@ -1,18 +1,23 @@
-/*  timer.c
+/**
+ *  @file
  *
  *  This file manages the benchmark timer used by the RTEMS Timing Test
  *  Suite.  Each measured time period is demarcated by calls to
- *  benchmark_timer_initialize() and benchmark_timer_read().  benchmark_timer_read() usually returns
- *  the number of microseconds since benchmark_timer_initialize() exitted.
+ *  benchmark_timer_initialize() and benchmark_timer_read().
+ *  benchmark_timer_read() usually returns the number of microseconds
+ *  since benchmark_timer_initialize() exitted.
  *
  *  NOTE: It is important that the timer start/stop overhead be
  *        determined when porting or modifying this code.
- *
+ */
+
+/*
  *  COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
  *  On-Line Applications Research Corporation (OAR).
  */
 
 #include <rtems.h>
+#include <rtems/btimer.h>
 
 bool benchmark_timer_find_average_overhead;
 
@@ -38,7 +43,7 @@ void benchmark_timer_initialize( void )
                              /* This value is in microseconds. */
 #define LEAST_VALID       1  /* Don't trust a clicks value lower than this */
 
-int benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint32_t   value;
   __asm__ volatile ( " mftb %0": "=r" (value) );

c/src/lib/libcpu/powerpc/mpc5xx/timer/timer.c

@@ -1,16 +1,13 @@
-/*  timer.c
+/**
+ *  @file
+ *  @brief Timer Driver for the PowerPC MPC5xx.
  *
  *  This file manages the interval timer on the PowerPC MPC5xx.
- *  NOTE: This is not the PIT, but rather the RTEMS interval
- *        timer
+ *  @noe This is not the PIT, but rather the RTEMS interval timer.
  *  We shall use the bottom 32 bits of the timebase register,
- *
- *  The following was in the 403 version of this file. I don't
- *  know what it means. JTM 5/19/98
- *  NOTE: It is important that the timer start/stop overhead be
- *        determined when porting or modifying this code.
- *
- *
+ */
+
+/*
  *  MPC5xx port sponsored by Defence Research and Development Canada - Suffield
  *  Copyright (C) 2004, Real-Time Systems Inc. (querbach@realtime.bc.ca)
  *
@@ -47,6 +44,7 @@
  */
 
 #include <rtems.h>
+#include <rtems/btimer.h>
 #include <mpc5xx.h>
 
 static volatile uint32_t Timer_starting;
@@ -80,7 +78,7 @@ void benchmark_timer_initialize(void)
   Timer_starting = get_itimer();
 }
 
-int benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t clicks;
   uint32_t total;

c/src/lib/libcpu/powerpc/mpc6xx/timer/timer.c

@@ -1,9 +1,11 @@
-/*  timer.c
+/**
+ *  @file
+ *  @brief
  *
  *  This file implements a benchmark timer using the PPC Timebase
- *
- *  Notes: NONE
- *
+ */
+
+/*
  *  COPYRIGHT (c) 1989-2000.
  *  On-Line Applications Research Corporation (OAR).
  *
@@ -12,10 +14,11 @@
  *  http://www.rtems.org/license/LICENSE.
  */
 
-#include <rtems/system.h>
-#include <assert.h>
-#include <rtems.h>
 #include <bsp.h>
+#include <rtems.h>
+#include <rtems/system.h>
+#include <rtems/btimer.h>
+#include <assert.h>
 #include <libcpu/powerpc-utility.h>
 
 
@@ -58,7 +61,7 @@ void benchmark_timer_initialize(void)
  *  benchmark_timer_read
  */
 
-int benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint64_t    total64;
   uint32_t    total;

c/src/lib/libcpu/powerpc/mpc8260/timer/timer.c

@@ -1,15 +1,13 @@
-/*  timer.c
+/**
+ *  @file 
+ *  @brief Timer for the PowerPC MPC860
  *
- *  This file manages the interval timer on the PowerPC MPC860.
- *  NOTE: This is not the PIT, but rather the RTEMS interval
- *        timer
  *  We shall use the bottom 32 bits of the timebase register,
  *
- *  The following was in the 403 version of this file. I don't
- *  know what it means. JTM 5/19/98
- *  NOTE: It is important that the timer start/stop overhead be
- *        determined when porting or modifying this code.
- *
+ *  @note This is not the PIT, but rather the RTEMS interval timer.
+ */
+
+/*
  *  Author: Andy Dachs <a.dachs@sstl.co.uk>
  *  Surrey Satellite Technlogy Limited
  *   Modified for MPC8260
@@ -46,6 +44,7 @@
  */
 
 #include <rtems.h>
+#include <rtems/btimer.h>
 #include <mpc8260.h>
 
 static volatile uint32_t   Timer_starting;
@@ -78,7 +77,7 @@ void benchmark_timer_initialize(void)
 
 extern uint32_t bsp_timer_least_valid;
 extern uint32_t bsp_timer_average_overhead;
-int benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t   clicks;
   uint32_t   total;

c/src/lib/libcpu/powerpc/mpc8xx/timer/timer.c

@@ -1,15 +1,14 @@
-/*  timer.c
+/**
+ *  @file
+ *  @brief Timer Driver for the PowerPC MPC8xx.
  *
  *  This file manages the interval timer on the PowerPC MPC8xx.
- *  NOTE: This is not the PIT, but rather the RTEMS interval
- *        timer
  *  We shall use the bottom 32 bits of the timebase register,
  *
- *  The following was in the 403 version of this file. I don't
- *  know what it means. JTM 5/19/98
- *  NOTE: It is important that the timer start/stop overhead be
- *        determined when porting or modifying this code.
- *
+ *  @note This is not the PIT, but rather the RTEMS interval timer
+ */
+
+/*
  *  Author: Jay Monkman (jmonkman@frasca.com)
  *  Copywright (C) 1998 by Frasca International, Inc.
  *
@@ -41,6 +40,7 @@
  */
 
 #include <rtems.h>
+#include <rtems/btimer.h>
 #include <mpc8xx.h>
 
 static volatile uint32_t   Timer_starting;
@@ -69,7 +69,7 @@ void benchmark_timer_initialize(void)
   Timer_starting = get_itimer();
 }
 
-int benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
   uint32_t   clicks;
   uint32_t   total;

c/src/lib/libcpu/powerpc/ppc403/timer/timer.c

@@ -1,11 +1,12 @@
-/*  timer.c
+/**
+ *  @file
+ *  @brief Timer Driver for the PowerPC 405.
  *
  *  This file manages the interval timer on the PowerPC 405.
  *  We shall use the bottom 32 bits of the timebase register,
- *
- *  NOTE: It is important that the timer start/stop overhead be
- *        determined when porting or modifying this code.
- *
+ */
+
+/*
  *  Author: Andrew Bray <andy@i-cubed.co.uk>
  *
  *  COPYRIGHT (c) 1995 by i-cubed ltd.
@@ -37,6 +38,7 @@
  */
 
 #include <rtems.h>
+#include <rtems/btimer.h>
 #include <libcpu/powerpc-utility.h>
 
 extern uint32_t bsp_timer_least_valid;
@@ -51,7 +53,7 @@ void benchmark_timer_initialize(void)
   startedAt = ppc_time_base();
 }
 
-int benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 {
 	uint32_t   clicks, total;
 

c/src/lib/libcpu/sh/sh7032/timer/timer.c

@@ -1,14 +1,9 @@
+/**
+ * @file
+ * @brief Timer for the Hitachi SH 703X
+ */
+
 /*
- *  timer for the Hitachi SH 703X
- *
- *  This file manages the benchmark timer used by the RTEMS Timing Test
- *  Suite.  Each measured time period is demarcated by calls to
- *  benchmark_timer_initialize() and benchmark_timer_read().  benchmark_timer_read() usually returns
- *  the number of microseconds since benchmark_timer_initialize() exitted.
- *
- *  NOTE: It is important that the timer start/stop overhead be
- *        determined when porting or modifying this code.
- *
  *  Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and
  *           Bernd Becker (becker@faw.uni-ulm.de)
  *
@@ -27,6 +22,7 @@
  */
 
 #include <rtems.h>
+#include <rtems/btimer.h>
 
 #include <rtems/score/sh_io.h>
 #include <rtems/score/ispsh7032.h>
@@ -147,7 +143,7 @@ void benchmark_timer_initialize( void )
                              /* This value is in microseconds. */
 #define LEAST_VALID       0 /* 20 */ /* Don't trust a clicks value lower than this */
 
-int benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint32_t   cclicks;
   uint32_t   total ;

c/src/lib/libcpu/sh/sh7045/timer/timer.c

@@ -1,14 +1,9 @@
+/**
+ *  @file
+ *  @brief Timer for the Hitachi SH 704X
+ */
+
 /*
- *  timer for the Hitachi SH 704X
- *
- *  This file manages the benchmark timer used by the RTEMS Timing Test
- *  Suite.  Each measured time period is demarcated by calls to
- *  benchmark_timer_initialize() and benchmark_timer_read().  benchmark_timer_read() usually returns
- *  the number of microseconds since benchmark_timer_initialize() exitted.
- *
- *  NOTE: It is important that the timer start/stop overhead be
- *        determined when porting or modifying this code.
- *
  *  Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and
  *           Bernd Becker (becker@faw.uni-ulm.de)
  *
@@ -27,6 +22,7 @@
  */
 
 #include <rtems.h>
+#include <rtems/btimer.h>
 
 #include <rtems/score/sh_io.h>
 #include <rtems/score/iosh7045.h>
@@ -143,7 +139,7 @@ void benchmark_timer_initialize( void )
                              /* This value is in microseconds. */
 #define LEAST_VALID       0 /* 20 */ /* Don't trust a clicks value lower than this */
 
-int benchmark_timer_read( void )
+benchmark_timer_t benchmark_timer_read( void )
 {
   uint32_t   clicks;
   uint32_t   total ;

c/src/lib/libcpu/sh/sh7750/timer/timer.c

@@ -1,14 +1,9 @@
+/**
+ *  @file
+ *  @brief Timer driver for the Hitachi SH 7750
+ */
+
 /*
- *  timer driver for the Hitachi SH 7750
- *
- *  This file manages the benchmark timer used by the RTEMS Timing Test
- *  Suite.  Each measured time period is demarcated by calls to
- *  benchmark_timer_initialize() and benchmark_timer_read().  benchmark_timer_read() usually returns
- *  the number of microseconds since benchmark_timer_initialize() exitted.
- *
- *  NOTE: It is important that the timer start/stop overhead be
- *        determined when porting or modifying this code.
- *
  *  Copyright (C) 2001 OKTET Ltd., St.-Petersburg, Russia
  *  Author: Victor V. Vengerov <vvv@oktet.ru>
  *
@@ -21,6 +16,7 @@
  */
 
 #include <rtems.h>
+#include <rtems/btimer.h>
 
 #include <rtems/score/sh_io.h>
 #include <rtems/score/iosh7750.h>
@@ -198,7 +194,7 @@ benchmark_timer_initialize(void)
  * RETURNS:
  *     number of microseconds since timer has been started
  */
-int
+benchmark_timer_t
 benchmark_timer_read(void)
 {
     uint32_t              clicks;

cpukit/libcsupport/Makefile.am

@@ -12,7 +12,6 @@ include_rtems_HEADERS += include/iosupp.h
 include_rtems_HEADERS += include/ringbuf.h
 include_rtems_HEADERS += include/rtc.h
 include_rtems_HEADERS += include/spurious.h
-include_rtems_HEADERS += include/timerdrv.h
 include_rtems_HEADERS += include/vmeintr.h
 
 ## motorola

cpukit/libcsupport/include/timerdrv.h

@@ -1,34 +0,0 @@
-/**
- * @file
- *
- * @brief Timer Driver for all Boards
- *
- * This file describes the Timer Driver for all boards.
- */
-
-/*
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _RTEMS_TIMERDRV_H
-#define _RTEMS_TIMERDRV_H
-
-#include <rtems/btimer.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Intentionally empty */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif

cpukit/libcsupport/preinstall.am

@@ -46,10 +46,6 @@ $(PROJECT_INCLUDE)/rtems/spurious.h: include/spurious.h $(PROJECT_INCLUDE)/rtems
 	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/rtems/spurious.h
 PREINSTALL_FILES += $(PROJECT_INCLUDE)/rtems/spurious.h
 
-$(PROJECT_INCLUDE)/rtems/timerdrv.h: include/timerdrv.h $(PROJECT_INCLUDE)/rtems/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/rtems/timerdrv.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/rtems/timerdrv.h
-
 $(PROJECT_INCLUDE)/rtems/vmeintr.h: include/vmeintr.h $(PROJECT_INCLUDE)/rtems/$(dirstamp)
 	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/rtems/vmeintr.h
 PREINSTALL_FILES += $(PROJECT_INCLUDE)/rtems/vmeintr.h

cpukit/sapi/include/confdefs.h

@@ -1319,7 +1319,7 @@ const rtems_libio_helper rtems_fs_init_helper =
 #endif
 
 #ifdef CONFIGURE_APPLICATION_NEEDS_TIMER_DRIVER
-  #include <rtems/timerdrv.h>
+  #include <rtems/btimer.h>
 #endif
 
 #ifdef CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER

doc/bsp_howto/timer.t

@@ -44,7 +44,7 @@ time units (typically microseconds) that have elapsed since the last
 call to @code{benchmark_timer_initialize}.
 
 @example
-int benchmark_timer_read(void)
+benchmark_timer_t benchmark_timer_read(void)
 @{
   stop time = read the hardware timer
   if the subtract overhead feature is enabled

testsuites/psxtmtests/psxtmbarrier01/init.c

@@ -12,7 +12,7 @@
 #endif
 
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 #include <pthread.h>
 

testsuites/psxtmtests/psxtmbarrier02/init.c

@@ -13,7 +13,7 @@
 
 #include <timesys.h>
 #include <tmacros.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 #include <pthread.h>

testsuites/psxtmtests/psxtmbarrier03/init.c

@@ -17,7 +17,7 @@
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 const char rtems_test_name[] = "PSXTMBARRIER 03";
 

testsuites/psxtmtests/psxtmbarrier04/init.c

@@ -15,7 +15,7 @@
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 const char rtems_test_name[] = "PSXTMBARRIER 04";
 

testsuites/psxtmtests/psxtmcond01/init.c

@@ -17,7 +17,7 @@
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 const char rtems_test_name[] = "PSXTMCOND 01";
 

testsuites/psxtmtests/psxtmcond02/init.c

@@ -13,7 +13,7 @@
 
 #include <timesys.h>
 #include <pthread.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 const char rtems_test_name[] = "PSXTMCOND 02";

testsuites/psxtmtests/psxtmcond03/init.c

@@ -17,7 +17,7 @@
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 const char rtems_test_name[] = "PSXTMCOND 03";
 

testsuites/psxtmtests/psxtmcond04/init.c

@@ -17,7 +17,7 @@
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 const char rtems_test_name[] = "PSXTMCOND 04";
 

testsuites/psxtmtests/psxtmcond05/init.c

@@ -13,7 +13,7 @@
 
 #include <timesys.h>
 #include <pthread.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 const char rtems_test_name[] = "PSXTMCOND 05";

testsuites/psxtmtests/psxtmcond06/init.c

@@ -17,7 +17,7 @@
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 #define N 5
 

testsuites/psxtmtests/psxtmcond07/init.c

@@ -17,7 +17,7 @@
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 #define N 1
 

testsuites/psxtmtests/psxtmcond08/init.c

@@ -30,7 +30,7 @@
 #include <sched.h>
 #include <timesys.h>
 #include <tmacros.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 #include <pthread.h>

testsuites/psxtmtests/psxtmkey01/init.c

@@ -12,7 +12,7 @@
 #endif
 
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include <errno.h>
 #include <pthread.h>
 #include "test_support.h"

testsuites/psxtmtests/psxtmkey02/init.c

@@ -12,7 +12,7 @@
 #endif
 
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include <errno.h>
 #include <pthread.h>
 #include "test_support.h"

testsuites/psxtmtests/psxtmmq01/init.c

@@ -13,7 +13,7 @@
 #include <fcntl.h>
 #include <timesys.h>
 #include <errno.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 #include <tmacros.h>
 #include <mqueue.h>

testsuites/psxtmtests/psxtmmutex01/init.c

@@ -12,7 +12,7 @@
 #endif
 
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include <errno.h>
 #include <pthread.h>
 #include "test_support.h"

testsuites/psxtmtests/psxtmmutex02/init.c

@@ -17,7 +17,7 @@
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 const char rtems_test_name[] = "PSXTMMUTEX 02";
 

testsuites/psxtmtests/psxtmmutex03/init.c

@@ -12,7 +12,7 @@
 #endif
 
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include <errno.h>
 #include <pthread.h>
 #include "test_support.h"

testsuites/psxtmtests/psxtmmutex04/init.c

@@ -13,7 +13,7 @@
 
 #include <timesys.h>
 #include <tmacros.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 #include <pthread.h>

testsuites/psxtmtests/psxtmmutex05/init.c

@@ -17,7 +17,7 @@
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 const char rtems_test_name[] = "PSXTMMUTEX 05";
 

testsuites/psxtmtests/psxtmmutex06/init.c

@@ -17,7 +17,7 @@
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 const char rtems_test_name[] = "PSXTMMUTEX 06";
 

testsuites/psxtmtests/psxtmmutex07/init.c

@@ -12,7 +12,7 @@
 #endif
 
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include <errno.h>
 #include <pthread.h>
 #include "test_support.h"

testsuites/psxtmtests/psxtmnanosleep01/init.c

@@ -12,7 +12,7 @@
 #endif
 
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 const char rtems_test_name[] = "PSXTMNANOSLEEP 01";

testsuites/psxtmtests/psxtmnanosleep02/init.c

@@ -12,7 +12,7 @@
 #endif
 
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 #include <pthread.h>

testsuites/psxtmtests/psxtmrwlock01/init.c

@@ -12,7 +12,7 @@
 #endif
 #include <errno.h>
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include <pthread.h>
 #include "test_support.h"
 

testsuites/psxtmtests/psxtmrwlock02/init.c

@@ -16,7 +16,7 @@
 #include <tmacros.h>
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 const char rtems_test_name[] = "PSXTMRWLOCK 02";

testsuites/psxtmtests/psxtmrwlock03/init.c

@@ -16,7 +16,7 @@
 #include <tmacros.h>
 #include <sched.h>
 #include <pthread.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 const char rtems_test_name[] = "PSXTMRWLOCK 03";

testsuites/psxtmtests/psxtmrwlock04/init.c

@@ -16,7 +16,7 @@
 #include <tmacros.h>
 #include <sched.h>
 #include <pthread.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 const char rtems_test_name[] = "PSXTMRWLOCK 04";

testsuites/psxtmtests/psxtmrwlock05/init.c

@@ -16,7 +16,7 @@
 #include <tmacros.h>
 #include <sched.h>
 #include <pthread.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 const char rtems_test_name[] = "PSXTMRWLOCK 05";

testsuites/psxtmtests/psxtmrwlock06/init.c

@@ -17,7 +17,7 @@
 #include <tmacros.h>
 #include <timesys.h>
 #include "test_support.h"
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 const char rtems_test_name[] = "PSXTMRWLOCK 06";
 

testsuites/psxtmtests/psxtmrwlock07/init.c

@@ -17,7 +17,7 @@
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 const char rtems_test_name[] = "PSXTMRWLOCK 07";
 

testsuites/psxtmtests/psxtmsem01/init.c

@@ -16,7 +16,7 @@
 #include <semaphore.h>
 #include <tmacros.h>
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 const char rtems_test_name[] = "PSXTMSEM 01";

testsuites/psxtmtests/psxtmsem02/init.c

@@ -16,7 +16,7 @@
 #include <semaphore.h>
 #include <tmacros.h>
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 const char rtems_test_name[] = "PSXTMSEM 02";

testsuites/psxtmtests/psxtmsem03/init.c

@@ -16,7 +16,7 @@
 #include <semaphore.h>
 #include <tmacros.h>
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>

testsuites/psxtmtests/psxtmsem04/init.c

@@ -20,7 +20,7 @@
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 const char rtems_test_name[] = "PSXTMSEM 04";
 

testsuites/psxtmtests/psxtmsem05/init.c

@@ -20,7 +20,7 @@
 #include "test_support.h"
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 
 const char rtems_test_name[] = "PSXTMSEM 05";
 

testsuites/psxtmtests/psxtmsleep01/init.c

@@ -12,7 +12,7 @@
 #endif
 
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 #include <unistd.h>

testsuites/psxtmtests/psxtmsleep02/init.c

@@ -12,7 +12,7 @@
 #endif
 
 #include <timesys.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 #include <pthread.h>

testsuites/psxtmtests/psxtmthread02/init.c

@@ -14,7 +14,7 @@
 #include <timesys.h>
 #include <pthread.h>
 #include <sched.h>
-#include <rtems/timerdrv.h>
+#include <rtems/btimer.h>
 #include "test_support.h"
 
 const char rtems_test_name[] = "PSXTMTHREAD 02";