bsp/lm3s69xx: Move ssi.c to bsps

This patch is a part of the BSP source reorganization.

Update #3285.

bsps/arm/lm3s69xx/i2c/ssi.c

@@ -0,0 +1,170 @@
+/*
+ * Copyright <20> 2013 Eugeniy Meshcheryakov <eugen@debian.org>
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.org/license/LICENSE.
+ */
+
+#include <bsp.h>
+#include <bspopts.h>
+#include <bsp/ssi.h>
+#include <bsp/syscon.h>
+#include <bsp/io.h>
+#include <bsp/lm3s69xx.h>
+
+typedef struct {
+  rtems_libi2c_bus_t bus;
+  volatile lm3s69xx_ssi *regs;
+  int bus_number;
+  uint16_t idle_char;
+  uint8_t cs_pin;
+  lm3s69xx_gpio_config io_configs[3];
+} lm3s69xx_ssi_bus_entry;
+
+static rtems_status_code lm3s69xx_ssi_init(rtems_libi2c_bus_t *bus)
+{
+  lm3s69xx_ssi_bus_entry *e = (lm3s69xx_ssi_bus_entry *)bus;
+  volatile lm3s69xx_ssi* regs = e->regs;
+  uint32_t clock_div = LM3S69XX_SYSTEM_CLOCK / 2 / LM3S69XX_SSI_CLOCK;
+
+  lm3s69xx_gpio_set_config_array(e->io_configs, 3);
+
+  lm3s69xx_syscon_enable_ssi_clock(e->bus_number, true);
+  regs->cr1 = 0;
+  regs->cpsr = SSI_CPSRDIV(2);
+  regs->cr0 = SSICR0_SCR(clock_div - 1) | SSICR0_SPO | SSICR0_SPH | SSICR0_FRF(0) | SSICR0_DSS(7);
+  regs->cr1 = SSICR1_SSE;
+
+  return RTEMS_SUCCESSFUL;
+}
+
+static rtems_status_code lm3s69xx_ssi_send_start(rtems_libi2c_bus_t *bus)
+{
+  return RTEMS_SUCCESSFUL;
+}
+
+static rtems_status_code lm3s69xx_ssi_send_stop(rtems_libi2c_bus_t *bus)
+{
+  lm3s69xx_ssi_bus_entry *e = (lm3s69xx_ssi_bus_entry *)bus;
+  volatile lm3s69xx_ssi* regs = e->regs;
+
+  while ((regs->sr & SSISR_BSY) != 0)
+    /* wait */;
+
+  lm3s69xx_gpio_set_pin(e->cs_pin, true);
+
+  return RTEMS_SUCCESSFUL;
+}
+
+static rtems_status_code lm3s69xx_ssi_send_addr(rtems_libi2c_bus_t *bus,
+        uint32_t addr, int rw)
+{
+  lm3s69xx_ssi_bus_entry *e = (lm3s69xx_ssi_bus_entry *)bus;
+  e->cs_pin = addr;
+  lm3s69xx_gpio_set_pin(e->cs_pin, false);
+
+  return RTEMS_SUCCESSFUL;
+}
+
+static int lm3s69xx_ssi_read(rtems_libi2c_bus_t *bus, unsigned char *in, int n)
+{
+  lm3s69xx_ssi_bus_entry *e = (lm3s69xx_ssi_bus_entry *)bus;
+  volatile lm3s69xx_ssi* regs = e->regs;
+  int i;
+
+  for (i = 0; i < n; i++) {
+    while ((regs->sr & SSISR_TNF) == 0)
+      /* wait */;
+
+    regs->dr = e->idle_char;
+
+    while ((regs->sr & SSISR_RNE) == 0)
+      /* wait */;
+
+    in[i] = regs->dr & 0xff;
+  }
+
+  return n;
+}
+
+static int lm3s69xx_ssi_write(rtems_libi2c_bus_t *bus, unsigned char *out, int n)
+{
+  lm3s69xx_ssi_bus_entry *e = (lm3s69xx_ssi_bus_entry *)bus;
+  volatile lm3s69xx_ssi* regs = e->regs;
+  int i;
+
+  for (i = 0; i < n; i++) {
+    while ((regs->sr & SSISR_TNF) == 0)
+      /* wait */;
+
+    regs->dr = out[i];
+
+    while ((regs->sr & SSISR_RNE) == 0)
+      /* wait */;
+
+    uint32_t dummy = regs->dr;
+    (void)dummy;
+  }
+
+  return n;
+}
+
+static int lm3s69xx_ssi_ioctl(rtems_libi2c_bus_t *bus, int cmd, void *arg)
+{
+  return -RTEMS_NOT_DEFINED;
+}
+
+static const rtems_libi2c_bus_ops_t lm3s69xx_ssi_ops = {
+  .init = lm3s69xx_ssi_init,
+  .send_start = lm3s69xx_ssi_send_start,
+  .send_stop = lm3s69xx_ssi_send_stop,
+  .send_addr = lm3s69xx_ssi_send_addr,
+  .read_bytes = lm3s69xx_ssi_read,
+  .write_bytes = lm3s69xx_ssi_write,
+  .ioctl = lm3s69xx_ssi_ioctl
+};
+
+static lm3s69xx_ssi_bus_entry ssi_0_bus = {
+  .bus = {
+    .ops = &lm3s69xx_ssi_ops,
+    .size = sizeof(lm3s69xx_ssi_bus_entry)
+  },
+  .regs = (volatile lm3s69xx_ssi *)LM3S69XX_SSI_0_BASE,
+  .bus_number = 0,
+  .idle_char = 0xffff,
+  .io_configs = {
+#if defined(LM3S69XX_MCU_LM3S3749) || defined(LM3S69XX_MCU_LM3S6965) || defined(LM3S69XX_MCU_LM4F120)
+    LM3S69XX_PIN_SSI_TX(LM3S69XX_PORT_A, 2), /* CLK */
+    LM3S69XX_PIN_SSI_TX(LM3S69XX_PORT_A, 5), /* TX */
+    LM3S69XX_PIN_SSI_RX(LM3S69XX_PORT_A, 4)  /* RX */
+#else
+#error No GPIO pin definitions for SSI 0
+#endif
+  }
+};
+
+rtems_libi2c_bus_t * const lm3s69xx_ssi_0 = &ssi_0_bus.bus;
+
+#if LM3S69XX_NUM_SSI_BLOCKS > 1
+static lm3s69xx_ssi_bus_entry ssi_1_bus = {
+  .bus = {
+    .ops = &lm3s69xx_ssi_ops,
+    .size = sizeof(lm3s69xx_ssi_bus_entry)
+  },
+  .regs = (volatile lm3s69xx_ssi *)LM3S69XX_SSI_1_BASE,
+  .bus_number = 1,
+  .idle_char = 0xffff,
+  .io_configs = {
+#if defined(LM3S69XX_MCU_LM3S3749) || defined(LM3S69XX_MCU_LM4F120)
+    LM3S69XX_PIN_SSI_TX(LM3S69XX_PORT_E, 0), /* CLK */
+    LM3S69XX_PIN_SSI_TX(LM3S69XX_PORT_E, 3), /* TX */
+    LM3S69XX_PIN_SSI_RX(LM3S69XX_PORT_E, 2)  /* RX */
+#else
+#error No GPIO pin definitions for SSI 1
+#endif
+  }
+};
+
+rtems_libi2c_bus_t * const lm3s69xx_ssi_1 = &ssi_1_bus.bus;
+#endif /* LM3S69XX_NUM_SSI_BLOCKS > 1 */