RTOS/rtems
1
0
Fork 0
forked from Imagelibrary/rtems
Code Pull Requests Activity

bsps: Move VME support to bsps

Browse Source 
The VME support is only used by powerpc BSPs.

This patch is a part of the BSP source reorganization.

Update #3285.
This commit is contained in:
Sebastian Huber
2018-04-03 16:41:16 +02:00
parent 671c31fc5d
commit 814eccb4cf
22 changed files with 14 additions and 35 deletions
Download Patch File Download Diff File Expand all files Collapse all files

662
bsps/powerpc/include/bsp/vmeTsi148.h Normal file
View File

@@ -0,0 +1,662 @@
/**
* @file
*
* @ingroup shared_vmetsi148
*
* @brief Driver for the Tundra Tsi148 pci-vme bridge
*/
#ifndef VME_TSI148_DRIVER_H
#define VME_TSI148_DRIVER_H
/*
* Authorship
* ----------
* This software was created by
* Till Straumann <strauman@slac.stanford.edu>, 2005-2007,
* Stanford Linear Accelerator Center, Stanford University.
*
* Acknowledgement of sponsorship
* ------------------------------
* This software was produced by
* the Stanford Linear Accelerator Center, Stanford University,
* under Contract DE-AC03-76SFO0515 with the Department of Energy.
*
* Government disclaimer of liability
* ----------------------------------
* Neither the United States nor the United States Department of Energy,
* nor any of their employees, makes any warranty, express or implied, or
* assumes any legal liability or responsibility for the accuracy,
* completeness, or usefulness of any data, apparatus, product, or process
* disclosed, or represents that its use would not infringe privately owned
* rights.
*
* Stanford disclaimer of liability
* --------------------------------
* Stanford University makes no representations or warranties, express or
* implied, nor assumes any liability for the use of this software.
*
* Stanford disclaimer of copyright
* --------------------------------
* Stanford University, owner of the copyright, hereby disclaims its
* copyright and all other rights in this software. Hence, anyone may
* freely use it for any purpose without restriction.
*
* Maintenance of notices
* ----------------------
* In the interest of clarity regarding the origin and status of this
* SLAC software, this and all the preceding Stanford University notices
* are to remain affixed to any copy or derivative of this software made
* or distributed by the recipient and are to be affixed to any copy of
* software made or distributed by the recipient that contains a copy or
* derivative of this software.
*
* ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
*/
#include <stdint.h>
#include <bsp/vme_am_defs.h>
/**
* @defgroup shared_vmetsi148 VMETSI148 Support
*
* @ingroup shared_vmeuniverse
*
* @brief VMETSI148 Support Package
*/
/* NOTE: A64 currently not implemented */
/* These can be ored with the AM */
/* NOTE: unlike the universe, the tsi148 doesn't allow for disabling posted writes ! */
#define VME_MODE_PREFETCH_ENABLE VME_AM_IS_MEMORY
#define _LD_VME_MODE_PREFETCHSZ 24
#define VME_MODE_PREFETCH_SIZE(x) (((x)&3)<<_LD_VME_MODE_PREFETCHSZ)
/* These bits can be or'ed with the address-modifier when calling
* the 'XlateAddr' routine below to further qualify the
* search criteria.
*/
#define VME_MODE_MATCH_MASK (3<<30)
#define VME_MODE_EXACT_MATCH (2<<30) /* all bits must match */
#define VME_MODE_AS_MATCH (1<<30) /* only A16/24/32 must match */
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile uint32_t BERegister; /* emphasize contents are big endian */
/*
* Scan the PCI busses for the Nth (N=='instance') Tsi148 VME bridge.
*
* RETURNS:
* contents of the IRQ_LINE PCI config register on Success,
* the base address of the Tsi148 register block is stored in
* *pbase.
* -1 on error (no Tsi found, error accessing PCI config space).
*
* SIDE_EFFECTS: PCI busmaster and response to memory addresses is enabled.
*/
int
vmeTsi148FindPciBase(int instance, BERegister **pbase);
/* Initialize driver for Nth Tsi148 device found.
* This routine does not change any registers but
* just scans the PCI bus for Tsi bridges and initializes
* a driver slot.
*
* RETURNS: 0 on success, nonzero on error (or if no Tsi148
* device is found).
*/
int
vmeTsi148InitInstance(unsigned instance);
/* Initialize driver with 1st Tsi148 bridge found
* RETURNS: (see vmeTsi148InitInstance()).
*/
int
vmeTsi148Init(void);
/* Setup the tsi148 chip, i.e. disable most of its
* mappings, reset interrupts etc.
*/
void
vmeTsi148ResetXX(BERegister *base);
/* Setup the tsi148 connected to the first driver slot */
void
vmeTsi148Reset(void);
/* Pull VME SYSRESET line */
void
vmeTsi148ResetBusXX(BERegister *base);
/* Pull VME SYSRESET line of the 1st controller */
void
vmeTsi148ResetBus(void);
/* NOTE: all non-'XX' versions of driver entry points which
* have an associated 'XX' entry point operate on the
* device connected to the 1st driver slot.
*/
/* configure a outbound port
*
* port: port number 0..7
*
* address_space: vxWorks compliant addressing mode identifier
* (see vme.h). The most important are:
* 0x0d - A32, Sup, Data
* 0x3d - A24, Sup, Data
* 0x2d - A16, Sup, Data
* additionally, the value 0 is accepted; it will
* disable this port.
* vme_address: address on the vme_bus of this port.
* local_address: address on the pci_bus of this port.
* length: size of this port.
*
* NOTE: the addresses and length parameters must meet certain alignment
* requirements (see Tsi148 documentation).
*
* RETURNS: 0 on success, -1 on failure. Error messages printed to stderr.
*/
int
vmeTsi148OutboundPortCfgXX(
BERegister *base,
unsigned long port,
unsigned long address_space,
unsigned long vme_address,
unsigned long pci_address,
unsigned long length);
int
vmeTsi148OutboundPortCfg(
unsigned long port,
unsigned long address_space,
unsigned long vme_address,
unsigned long pci_address,
unsigned long length);
/* configure a VME inbound (PCI master) port */
int
vmeTsi148InboundPortCfgXX(
BERegister *base,
unsigned long port,
unsigned long address_space,
unsigned long vme_address,
unsigned long pci_address,
unsigned long length);
int
vmeTsi148InboundPortCfg(
unsigned long port,
unsigned long address_space,
unsigned long vme_address,
unsigned long pci_address,
unsigned long length);
/* Translate an address through the bridge
*
* vmeTsi248XlateAddr(0,0,as,addr,&result)
* yields a VME a address that reflects
* a local memory location as seen from the VME bus through the
* tsi148 VME inbound port.
*
* Likewise does vmeTsi148XlateAddr(1,0,as,addr,&result)
* translate a VME bus addr (backwards, through the VME outbound
* port) to the PCI side of the bridge.
*
* A valid address space modifier must be specified.
* If VME_MODE_EXACT_MATCH is set, all the mode bits must
* match the requested mode. If VME_MODE_EXACT_MATCH is not
* set in the mode word, only the basic mode (address-space,
* sup/usr and pgm/data) is compared.
*
* The 'reverse' parameter may be used to find a reverse
* mapping, i.e. the pci address in a outbound window can be
* found if the respective vme address is known etc.
*
* RETURNS: translated address in *pbusAdrs / *plocalAdrs
*
* 0: success
* -1: address/modifier not found in any bridge port
* -2: invalid modifier
*/
int
vmeTsi148XlateAddrXX(
BERegister *base, /* TSI 148 base address */
int outbound, /* look in the outbound windows */
int reverse, /* reverse mapping; for outbound ports: map local to VME */
unsigned long as, /* address space */
unsigned long aIn, /* address to look up */
unsigned long *paOut/* where to put result */
);
int
vmeTsi148XlateAddr(
int outbound, /* look in the outbound windows */
int reverse, /* reverse mapping; for outbound: map local to VME */
unsigned long as, /* address space */
unsigned long aIn, /* address to look up */
unsigned long *paOut/* where to put result */
);
/* avoid pulling stdio.h into this header.
* Applications that want a declaration of the
* following routines should
* #include <stdio.h>
* #define _VME_TSI148_DECLARE_SHOW_ROUTINES
* #include <vmeTsi148.h>
*/
#ifdef _VME_TSI148_DECLARE_SHOW_ROUTINES
/* Print the current configuration of all outbound ports to
* f (stdout if NULL)
*/
void
vmeTsi148OutboundPortsShowXX(BERegister *base, FILE *f);
void
vmeTsi148OutboundPortsShow(FILE *f);
/* Print the current configuration of all inbound ports to
* f (stdout if NULL)
*/
void
vmeTsi148InboundPortsShowXX(BERegister *base, FILE *f);
void
vmeTsi148InboundPortsShow(FILE *f);
#endif
/* Disable all in- or out-bound ports, respectively */
void
vmeTsi148DisableAllInboundPortsXX(BERegister *base);
void
vmeTsi148DisableAllInboundPorts(void);
void
vmeTsi148DisableAllOutboundPortsXX(BERegister *base);
void
vmeTsi148DisableAllOutboundPorts(void);
# define TSI_VEAT_VES (1<<31)
# define TSI_VEAT_VEOF (1<<30)
# define TSI_VEAT_VESCL (1<<29)
# define TSI_VEAT_2eOT (1<<21)
# define TSI_VEAT_2eST (1<<20)
# define TSI_VEAT_BERR (1<<19)
# define TSI_VEAT_LWORD (1<<18)
# define TSI_VEAT_WRITE (1<<17)
# define TSI_VEAT_IACK (1<<16)
# define TSI_VEAT_DS1 (1<<15)
# define TSI_VEAT_DS0 (1<<14)
# define TSI_VEAT_AM(v) (((v)>>8)&63)
# define TSI_VEAT_XAM(v) ((v)&255)
/* Check and clear the error (AKA 'exception') register.
* Note that the Tsi148 does *not* propagate VME bus errors of any kind to
* the PCI status register and hence this routine (or registering an ISR
* to the TSI_VERR_INT_VEC) is the only means for detecting a bus error.
*
* RETURNS:
* 0 if no error has occurred since this routine was last called.
* Contents of the 'VEAT' register (bit definitions as above)
* otherwise.
* If a non-NULL 'paddr' argument is provided then the lower 32-bit
* of the error address is stored in *paddr (only if return value is
* non-zero).
*
* SIDE EFFECTS: this routine clears the error attribute register, allowing
* for future errors to be latched.
*/
unsigned long
vmeTsi148ClearVMEBusErrorsXX(BERegister *base, uint32_t *paddr);
unsigned long
vmeTsi148ClearVMEBusErrors(uint32_t *paddr);
/* Map internal register block to VME.
*
* This routine is intended for BSP implementors. The registers must be
* accessible from VME so that the interrupt handler can flush the
* bridge FIFO (see below).
*
* vme_base: VME address where the TSI registers (4k) can be mapped.
* This VME address must fall into a range covered by
* any pre-configured outbound window.
* address_space: The desired VME address space.
* (all of SUP/USR/PGM/DATA are always accepted).
*
* See NOTES [vmeTsi148InstallIrqMgrAlt()] below for further information.
*
* RETURNS: 0 on success, nonzero on error. It is not possible (and results
* in a non-zero return code) to change the CRG VME address after
* initializing the interrupt manager as it uses the CRG.
*/
int
vmeTsi148MapCRGXX(BERegister *base, uint32_t vme_base, uint32_t address_space);
int
vmeTsi148MapCRG(uint32_t vme_base, uint32_t address_space);
/* VME Interrupt Handler functionality */
/* we dont use the current RTEMS/BSP interrupt API for the
* following reasons:
*
* - RTEMS/BSP API does not pass an argument to the ISR :-( :-(
* - no separate vector space for VME vectors. Some vectors would
* have to overlap with existing PCI/ISA vectors.
* - RTEMS/BSP API allocates a structure for every possible vector
* - the irq_on(), irq_off() functions add more bloat than helping.
* They are (currently) only used by the framework to disable
* interrupts at the device level before removing a handler
* and to enable interrupts after installing a handler.
* These operations may as well be done by the driver itself.
*
* Hence, we maintain our own (VME) handler table and hook our PCI
* handler into the standard RTEMS/BSP environment. Our handler then
* dispatches VME interrupts.
*/
typedef void (*VmeTsi148ISR) (void *usrArg, unsigned long vector);
/* install a handler for a VME vector
* RETURNS 0 on success, nonzero on failure.
*/
int
vmeTsi148InstallISR(unsigned long vector, VmeTsi148ISR handler, void *usrArg);
/* remove a handler for a VME vector. The vector and usrArg parameters
* must match the respective parameters used when installing the handler.
* RETURNS 0 on success, nonzero on failure.
*/
int
vmeTsi148RemoveISR(unsigned long vector, VmeTsi148ISR handler, void *usrArg);
/* query for the currently installed ISR and usr parameter at a given vector
* RETURNS: ISR or 0 (vector too big or no ISR installed)
*/
VmeTsi148ISR
vmeTsi148ISRGet(unsigned long vector, void **parg);
/* utility routines to enable/disable a VME IRQ level
*
* To enable/disable the internal interrupt sources (special vectors above)
* pass a vector argument > 255.
*
* RETURNS 0 on success, nonzero on failure
*/
int
vmeTsi148IntEnable(unsigned int level);
int
vmeTsi148IntDisable(unsigned int level);
/* Check if an interrupt level or internal source is enabled:
*
* 'level': VME level 1..7 or internal special vector > 255
*
* RETURNS: value > 0 if interrupt is currently enabled,
* zero if interrupt is currently disabled,
* -1 on error (invalid argument).
*/
int
vmeTsi148IntIsEnabled(unsigned int level);
/* Set IACK width (1,2, or 4 bytes) for a given interrupt level.
*
* 'width' arg may be 0,1,2 or 4. If zero, the currently active
* value is returned but not modified.
*
* RETURNS: old width or -1 if invalid argument.
*/
int
vmeTsi148SetIackWidth(int level, int width);
/* Change the routing of IRQ 'level' to 'pin'.
* If the BSP connects more than one of the four
* physical interrupt lines from the tsi148 to
* the board's PIC then you may change the physical
* line a given 'level' is using. By default,
* all 7 VME levels use the first wire (pin==0) and
* all internal sources use the (optional) second
* wire (pin==1) [The driver doesn't support more than
* four wires].
* This feature is useful if you want to make use of
* different hardware priorities of the PIC. Let's
* say you want to give IRQ level 7 the highest priority.
* You could then give 'pin 0' a higher priority (at the
* PIC) and 'pin 1' a lower priority and issue.
*
* for ( i=1; i<7; i++ ) vmeTsi148IntRoute(i, 1);
*
* PARAMETERS:
* 'level' : VME interrupt level '1..7' or one of
* the internal sources. Pass the internal
* source's vector number (>=256).
* 'pin' : a value of 0 routes the requested IRQ to
* the first line registered with the manager,
* a value of 1 routes it to the second wire
* etc.
*
* RETURNS: 0 on success, nonzero on error (invalid arguments)
*
* NOTES: - DONT change the tsi148 'map' registers
* directly. The driver caches routing internally.
* - support for the extra wires (beyond wire #0) is
* board dependent. If the board only provides
* a single physical wire from the tsi148 to
* the PIC then the feature might not be available.
*/
int
vmeTsi148IntRoute(unsigned int level, unsigned int pin);
/* Raise a VME Interrupt at 'level' and respond with 'vector' to a
* handler on the VME bus. (The handler could be a different board
* or the tsi148 itself.
*
* Note that you could install a interrupt handler at TSI_VME_SW_IACK_INT_VEC
* to be notified of an IACK cycle having completed.
*
* This routine is mainly FOR TESTING.
*
* NOTES:
* - the VICR register is modified.
* - NO MUTUAL EXCLUSION PROTECTION (reads VICR, modifies then writes back).
* If several users need access to VICR it is their responsibility to serialize access.
*
* Arguments:
* 'level': interrupt level, 1..7
* 'vector': vector number (0..255) that the tsi148 puts on the bus in response to
* an IACK cycle.
*
* RETURNS:
* 0: Success
* -1: Invalid argument (level not 1..7, vector >= 256)
* -2: Interrupt 'level' already asserted (maybe nobody handles it).
* You can manually clear it be setting the IRQC bit in
* VICR. Make sure really nobody responds to avoid spurious
* interrupts (consult tsi148 docs).
*/
int
vmeTsi148IntRaiseXX(BERegister *base, int level, unsigned vector);
int
vmeTsi148IntRaise(int level, unsigned vector);
/* Loopback test of the VME interrupt subsystem.
* - installs ISRs on 'vector' and on TSI_VME_SW_IACK_INT_VEC
* - asserts VME interrupt 'level'
* - waits for both interrupts: 'ordinary' VME interrupt of 'level' and
* IACK completion interrupt ('special' vector TSI_VME_SW_IACK_INT_VEC).
*
* NOTES:
* - make sure no other handler responds to 'level'.
* - make sure no ISR is installed on both vectors yet.
* - ISRs installed by this routine are removed after completion.
* - no concurrent access protection of all involved resources
* (levels, vectors and registers [see vmeTsi148IntRaise()])
* is implemented.
* - this routine is intended for TESTING (when implementing new BSPs etc.).
* - one RTEMS message queue is temporarily used (created/deleted).
*
* RETURNS:
* 0: Success.
* -1: Invalid arguments.
* 1: Test failed (outstanding interrupts).
* rtems_status_code: Failed RTEMS directive.
*/
int
vmeTsi148IntLoopbackTst(int level, unsigned vector);
/* use these special vectors to connect a handler to the
* tsi148 specific interrupts (such as "DMA done", SW or
* error irqs etc.)
* NOTE: The wrapper clears all status LINT bits (except
* for regular VME irqs). Also note that it is the user's
* responsibility to enable the necessary interrupts in
* LINT_EN
*
* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
* DO NOT CHANGE THE ORDER OF THESE VECTORS - THE DRIVER
* DEPENDS ON IT
* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
*
* Deliberately, these vectors match the universe driver's
*/
/* 256 no VOWN interrupt */
#define TSI_DMA_INT_VEC 257
#define TSI_LERR_INT_VEC 258
#define TSI_VERR_INT_VEC 259
/* 260 is reserved */
#define TSI_VME_SW_IACK_INT_VEC 261
/* 262 no PCI SW IRQ */
#define TSI_SYSFAIL_INT_VEC 263
#define TSI_ACFAIL_INT_VEC 264
#define TSI_MBOX0_INT_VEC 265
#define TSI_MBOX1_INT_VEC 266
#define TSI_MBOX2_INT_VEC 267
#define TSI_MBOX3_INT_VEC 268
#define TSI_LM0_INT_VEC 269
#define TSI_LM1_INT_VEC 270
#define TSI_LM2_INT_VEC 271
#define TSI_LM3_INT_VEC 272
/* New vectors; only on TSI148 */
#define TSI_VIES_INT_VEC 273
#define TSI_DMA1_INT_VEC 274
#define TSI_NUM_INT_VECS 275
#ifdef __INSIDE_RTEMS_BSP__
#include <stdarg.h>
/* the tsi148 interrupt handler is capable of routing all sorts of
* (VME) interrupts to 4 different lines (some of) which may be hooked up
* in a (board specific) way to a PIC.
*
* This driver initially supports at most two lines (i.e., if the user
* doesn't re-route anything). By default, it routes the
* 7 VME interrupts to the main line and optionally, it routes the 'special'
* interrupts generated by the tsi148 itself (DMA done, SW irq etc.)
* to a second line. If no second line is available, all IRQs are routed
* to the main line.
*
* The routing of interrupts to the two lines can be modified (using
* the vmeTsi148IntRoute() call - see above - i.e., to make use of
* different hardware priorities and/or more physically available lines.
*
* Because the driver has no way to figure out which lines are actually
* wired to the PIC, this information has to be provided when installing
* the manager.
*
* Hence the manager sets up routing VME interrupts to 1 or 2 tsi148
* OUTPUTS. However, it must also be told to which PIC INPUTS they
* are wired.
* Optionally, the first PIC input line can be read from PCI config space
* but the second must be passed to this routine. Note that the info read
* from PCI config space is wrong for some boards!
*
* PARAMETERS:
* flags: VMETSI148_IRQ_MGR_FLAG_SHARED:
* use the BSP_install_rtems_shared_irq_handler() instead
* of BSP_install_rtems_irq_handler(). Use this if the PIC
* line is used by other devices, too.
* CAVEAT: shared interrupts need RTEMS workspace, i.e., the
* VME interrupt manager can only be installed
* *after workspace is initialized* if 'shared' is nonzero
* (i.e., *not* from bspstart()).
*
* tsi_pin_0: to which output pin (of the tsi148) should the 7
* VME irq levels be routed.
*
* pic_pin_0: specifies to which PIC input the 'main' output is
* wired on your board. If passed a value < 0, the driver
* reads this information from PCI config space ("IRQ line").
* ... : up to three additional tsi_pin/pic_pin pairs can be
* specified if your board provides more physical wires.
* In any case must the varargs list be terminated by '-1'.
*
* RETURNS: 0 on success, -1 on failure.
*
* NOTES: The Tsi148 always does 'posted' writes through a FIFO buffer.
* This effectively makes VME write operations asynchronous
* which can have undesired side-effects.
* In particular, consider the case of an ISR clearing the
* interrupt condition by writing to a CSR. The write operation
* doesn't really do anything but goes into the FIFO and
* the user ISR returns. At this point, the interrupt manager
* may find the IRQ still pending, trying another IACK
* cycle. Because it is probable that at this time the FIFO
* has been flushed and the CSR-write operation been effective,
* the IACK then times out.
* Note that this phenomenon becomes more obvious as CPUs
* become faster.
*
* To avoid this race condition and many VME drivers having
* to be re-written, a VME read (having the desired side-effect
* of flushing the write FIFO) must be issued between the
* user ISR returning and the interrupt manager checking for
* more pending interrupts.
*
* Therefore, the BSP needs to map the Tsi148 register
* block to VME so that a read over VME can be effectuated.
* (In addition to being mapped to VME, the mapped address
* range must be accessible through an outbound window.)
*/
#define VMETSI148_IRQ_MGR_FLAG_SHARED 1
int
vmeTsi148InstallIrqMgrAlt(int shared, int tsi_pin0, int pic_pin0, ...);
int
vmeTsi148InstallIrqMgrVa(int shared, int tsi_pin0, int pic_pin0, va_list ap);
#endif
#ifdef __cplusplus
}
#endif
#endif

102
bsps/powerpc/include/bsp/vmeTsi148DMA.h Normal file
View File

@@ -0,0 +1,102 @@
/**
* @file
*
* @ingroup shared_vmetsi148dma
*
* @brief vmeTsi148DMA Support
*/
#ifndef VME_TSI148_DMA_H
#define VME_TSI148_DMA_H
#include <bsp/vmeTsi148.h>
/*
* Authorship
* ----------
* This software was created by
* Till Straumann <strauman@slac.stanford.edu>, 2006, 2007
* Stanford Linear Accelerator Center, Stanford University.
*
* Acknowledgement of sponsorship
* ------------------------------
* This software was produced by
* the Stanford Linear Accelerator Center, Stanford University,
* under Contract DE-AC03-76SFO0515 with the Department of Energy.
*
* Government disclaimer of liability
* ----------------------------------
* Neither the United States nor the United States Department of Energy,
* nor any of their employees, makes any warranty, express or implied, or
* assumes any legal liability or responsibility for the accuracy,
* completeness, or usefulness of any data, apparatus, product, or process
* disclosed, or represents that its use would not infringe privately owned
* rights.
*
* Stanford disclaimer of liability
* --------------------------------
* Stanford University makes no representations or warranties, express or
* implied, nor assumes any liability for the use of this software.
*
* Stanford disclaimer of copyright
* --------------------------------
* Stanford University, owner of the copyright, hereby disclaims its
* copyright and all other rights in this software. Hence, anyone may
* freely use it for any purpose without restriction.
*
* Maintenance of notices
* ----------------------
* In the interest of clarity regarding the origin and status of this
* SLAC software, this and all the preceding Stanford University notices
* are to remain affixed to any copy or derivative of this software made
* or distributed by the recipient and are to be affixed to any copy of
* software made or distributed by the recipient that contains a copy or
* derivative of this software.
*
* ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
*/
#ifdef __cplusplus
extern "C" {
#endif
/**
* @defgroup shared_vmetsi148dma DMA List
*
* @ingroup shared_vmeuniverse
*
* @brief DMA List access functions for use by bspVmeDmaList
*/
extern struct VMEDmaListClassRec_ vmeTsi148DmaListClass;
typedef struct VmeTsi148DmaListDescriptorRec_ *VmeTsi148DmaListDescriptor;
int
vmeTsi148DmaSetupXX(BERegister *base, int channel, uint32_t mode, uint32_t xfer_mode, void *custom);
int
vmeTsi148DmaSetup(int channel, uint32_t mode, uint32_t xfer_mode, void *custom);
int
vmeTsi148DmaListStartXX(BERegister *base, int channel, VmeTsi148DmaListDescriptor d);
int
vmeTsi148DmaListStart(int channel, VmeTsi148DmaListDescriptor d);
int
vmeTsi148DmaStartXX(BERegister *base, int channel, uint32_t pci_addr, uint32_t vme_addr, uint32_t n_bytes);
int
vmeTsi148DmaStart(int channel, uint32_t pci_addr, uint32_t vme_addr, uint32_t n_bytes);
uint32_t
vmeTsi148DmaStatusXX(BERegister *base, int channel);
uint32_t
vmeTsi148DmaStatus(int channel);
#ifdef __cplusplus
}
#endif
#endif

1045
bsps/powerpc/include/bsp/vmeUniverse.h Normal file
View File

File diff suppressed because it is too large Load Diff

95
bsps/powerpc/include/bsp/vmeUniverseDMA.h Normal file
View File

@@ -0,0 +1,95 @@
/**
* @file
*
* @ingroup shared_vmeuniversedma
*
* @brief vmeUniverseDMA Support
*/
#ifndef VME_UNIVERSE_DMA_H
#define VME_UNIVERSE_DMA_H
/*
* Authorship
* ----------
* This software was created by
* Till Straumann <strauman@slac.stanford.edu>, 2006, 2007
* Stanford Linear Accelerator Center, Stanford University.
*
* Acknowledgement of sponsorship
* ------------------------------
* This software was produced by
* the Stanford Linear Accelerator Center, Stanford University,
* under Contract DE-AC03-76SFO0515 with the Department of Energy.
*
* Government disclaimer of liability
* ----------------------------------
* Neither the United States nor the United States Department of Energy,
* nor any of their employees, makes any warranty, express or implied, or
* assumes any legal liability or responsibility for the accuracy,
* completeness, or usefulness of any data, apparatus, product, or process
* disclosed, or represents that its use would not infringe privately owned
* rights.
*
* Stanford disclaimer of liability
* --------------------------------
* Stanford University makes no representations or warranties, express or
* implied, nor assumes any liability for the use of this software.
*
* Stanford disclaimer of copyright
* --------------------------------
* Stanford University, owner of the copyright, hereby disclaims its
* copyright and all other rights in this software. Hence, anyone may
* freely use it for any purpose without restriction.
*
* Maintenance of notices
* ----------------------
* In the interest of clarity regarding the origin and status of this
* SLAC software, this and all the preceding Stanford University notices
* are to remain affixed to any copy or derivative of this software made
* or distributed by the recipient and are to be affixed to any copy of
* software made or distributed by the recipient that contains a copy or
* derivative of this software.
*
* ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
*/
#include <bsp/vmeUniverse.h>
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @defgroup shared_vmeuniversedma vmeUniverseDMA Support
*
* @ingroup shared_vmeuniverse
*
* @brief vmeUniverseDMA Support Package
*/
extern struct VMEDmaListClassRec_ vmeUniverseDmaListClass;
int
vmeUniverseDmaSetupXX(volatile LERegister *base, int channel, uint32_t mode, uint32_t xfer_mode, void *custom);
int
vmeUniverseDmaSetup(int channel, uint32_t mode, uint32_t xfer_mode, void *custom);
int
vmeUniverseDmaStartXX(volatile LERegister *base, int channel, uint32_t pci_addr, uint32_t vme_addr, uint32_t n_bytes);
int
vmeUniverseDmaStart(int channel, uint32_t pci_addr, uint32_t vme_addr, uint32_t n_bytes);
uint32_t
vmeUniverseDmaStatusXX(volatile LERegister *base, int channel);
uint32_t
vmeUniverseDmaStatus(int channel);
#ifdef __cplusplus
}
#endif
#endif

198
bsps/powerpc/include/bsp/vme_am_defs.h Normal file
View File

@@ -0,0 +1,198 @@
/**
* @file
*
* @ingroup shared_vmeamdefs
*
* @brief vxworks compatible addressing modes
*/
#ifndef VME_AM_DEFINITIONS_H
#define VME_AM_DEFINITIONS_H
/*
* Authorship
* ----------
* This software was created by
* Till Straumann <strauman@slac.stanford.edu>, 2002-2007,
* Stanford Linear Accelerator Center, Stanford University.
*
* Acknowledgement of sponsorship
* ------------------------------
* This software was produced by
* the Stanford Linear Accelerator Center, Stanford University,
* under Contract DE-AC03-76SFO0515 with the Department of Energy.
*
* Government disclaimer of liability
* ----------------------------------
* Neither the United States nor the United States Department of Energy,
* nor any of their employees, makes any warranty, express or implied, or
* assumes any legal liability or responsibility for the accuracy,
* completeness, or usefulness of any data, apparatus, product, or process
* disclosed, or represents that its use would not infringe privately owned
* rights.
*
* Stanford disclaimer of liability
* --------------------------------
* Stanford University makes no representations or warranties, express or
* implied, nor assumes any liability for the use of this software.
*
* Stanford disclaimer of copyright
* --------------------------------
* Stanford University, owner of the copyright, hereby disclaims its
* copyright and all other rights in this software. Hence, anyone may
* freely use it for any purpose without restriction.
*
* Maintenance of notices
* ----------------------
* In the interest of clarity regarding the origin and status of this
* SLAC software, this and all the preceding Stanford University notices
* are to remain affixed to any copy or derivative of this software made
* or distributed by the recipient and are to be affixed to any copy of
* software made or distributed by the recipient that contains a copy or
* derivative of this software.
*
* ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
*/
/**
* @defgroup shared_vmeamdefs VME_AM_DEFS
*
* @ingroup shared_vmeuniverse
*
* @brief 64-bit *addresses* are not supported [data are].
*/
#ifndef VME_AM_STD_SUP_BLT
#define VME_AM_STD_SUP_BLT 0x3f
#endif
#ifndef VME_AM_STD_SUP_ASCENDING
#define VME_AM_STD_SUP_ASCENDING 0x3f
#endif
#ifndef VME_AM_STD_SUP_PGM
#define VME_AM_STD_SUP_PGM 0x3e
#endif
#ifndef VME_AM_STD_SUP_MBLT
#define VME_AM_STD_SUP_MBLT 0x3c
#endif
#ifndef VME_AM_STD_USR_BLT
#define VME_AM_STD_USR_BLT 0x3b
#endif
#ifndef VME_AM_STD_USR_ASCENDING
#define VME_AM_STD_USR_ASCENDING 0x3b
#endif
#ifndef VME_AM_STD_USR_PGM
#define VME_AM_STD_USR_PGM 0x3a
#endif
#ifndef VME_AM_STD_SUP_DATA
#define VME_AM_STD_SUP_DATA 0x3d
#endif
#ifndef VME_AM_STD_USR_DATA
#define VME_AM_STD_USR_DATA 0x39
#endif
#ifndef VME_AM_STD_USR_MBLT
#define VME_AM_STD_USR_MBLT 0x38
#endif
#ifndef VME_AM_EXT_SUP_BLT
#define VME_AM_EXT_SUP_BLT 0x0f
#endif
#ifndef VME_AM_EXT_SUP_ASCENDING
#define VME_AM_EXT_SUP_ASCENDING 0x0f
#endif
#ifndef VME_AM_EXT_SUP_PGM
#define VME_AM_EXT_SUP_PGM 0x0e
#endif
#ifndef VME_AM_EXT_SUP_DATA
#define VME_AM_EXT_SUP_DATA 0x0d
#endif
#ifndef VME_AM_EXT_SUP_MBLT
#define VME_AM_EXT_SUP_MBLT 0x0c
#endif
#ifndef VME_AM_EXT_USR_BLT
#define VME_AM_EXT_USR_BLT 0x0b
#endif
#ifndef VME_AM_EXT_USR_ASCENDING
#define VME_AM_EXT_USR_ASCENDING 0x0b
#endif
#ifndef VME_AM_EXT_USR_PGM
#define VME_AM_EXT_USR_PGM 0x0a
#endif
#ifndef VME_AM_EXT_USR_DATA
#define VME_AM_EXT_USR_DATA 0x09
#endif
#ifndef VME_AM_EXT_USR_MBLT
#define VME_AM_EXT_USR_MBLT 0x08
#endif
#ifndef VME_AM_2eVME_6U
#define VME_AM_2eVME_6U 0x20
#endif
#ifndef VME_AM_2eVME_3U
#define VME_AM_2eVME_3U 0x21
#endif
#ifndef VME_AM_CSR
#define VME_AM_CSR 0x2f
#endif
#ifndef VME_AM_SUP_SHORT_IO
#define VME_AM_SUP_SHORT_IO 0x2d
#endif
#ifndef VME_AM_USR_SHORT_IO
#define VME_AM_USR_SHORT_IO 0x29
#endif
#ifndef VME_AM_IS_SHORT
#define VME_AM_IS_SHORT(a) (((a) & 0x30) == 0x20)
#endif
#ifndef VME_AM_IS_STD
#define VME_AM_IS_STD(a) (((a) & 0x30) == 0x30)
#endif
#ifndef VME_AM_IS_EXT
#define VME_AM_IS_EXT(a) (((a) & 0x30) == 0x00)
#endif
#ifndef VME_AM_IS_SUP
#define VME_AM_IS_SUP(a) ((a) & 4)
#endif
/* Mask for standard address modifiers */
#ifndef VME_AM_MASK
#define VME_AM_MASK 0x3f
#endif
/* Hint that a window is mapping memory; the
* driver may assume it to be safe to enable decoupled
* cycles, caching and the like...
*/
#ifndef VME_AM_IS_MEMORY
#define VME_AM_IS_MEMORY (1<<8)
#endif
/* I don't know AMs for 2eSST so we use some extra bits;
* HOWEVER: these are just qualifiers to the VME_AM_2eVME_xx modes
* i.e., if you want 2eSST you must also select 2eVME...
*/
/* 2eSST broadcast; you still need to set one of the speed bits */
#define VME_AM_2eSST_BCST (1<<9)
/* Low speed (driver specific) */
#define VME_AM_2eSST_LO (1<<10)
/* Mid speed (driver specific) */
#define VME_AM_2eSST_MID (2<<10)
/* High speed (driver specific) */
#define VME_AM_2eSST_HI (3<<10)
#define VME_AM_IS_2eSST(am) ((am) & (3<<10))
/* Use 8/16/32-bit transfers for coupled- or BLT cycles
* (MBLT, 2exxx are probably always 64-bit)
*/
#define VME_MODE_DBW_MSK (3<<12)
#define VME_MODE_DBW8 (1<<12)
#define VME_MODE_DBW16 (2<<12)
#define VME_MODE_DBW32 (3<<12)
/* Unused Flags 1<<14 .. 1<<23 are reserved
*
* (20-23 used by DMA API).
* Flags 1<<24 .. 1<<31 are for driver specific options
*/
#endif