RTOS/rtems
1
0
Fork 0
forked from Imagelibrary/rtems
Code Pull Requests Activity

2007-12-04 Joel Sherrill <joel.sherrill@OARcorp.com>

Browse Source 
* cpu_supplement/arm.t, cpu_supplement/i386.t, cpu_supplement/m68k.t,
	cpu_supplement/mips.t, cpu_supplement/powerpc.t, cpu_supplement/sh.t,
	cpu_supplement/sparc.t, cpu_supplement/tic4x.t, porting/cpuinit.t,
	user/conf.t, user/init.t: Move interrupt_stack_size field from CPU
	Table to Configuration Table. Eliminate CPU Table from all ports.
	Delete references to CPU Table in all forms.
This commit is contained in:
Joel Sherrill
2007-12-04 22:18:30 +00:00
parent 5ca28f6ae6
commit 66c50e281a
12 changed files with 39 additions and 535 deletions
Download Patch File Download Diff File Expand all files Collapse all files

42
doc/cpu_supplement/arm.t
View File

@@ -485,45 +485,3 @@ install an interrupt stack and -- for whatever reason -- an
interrupt occurs before initialize_executive is invoked, then
the results are unpredictable.
@c
@c COPYRIGHT (c) 1988-2002.
@c On-Line Applications Research Corporation (OAR).
@c All rights reserved.
@c
@c $Id$
@c
@section Processor Dependent Information Table
Any highly processor dependent information required
to describe a processor to RTEMS is provided in the CPU
Dependent Information Table. This table is not required for all
processors supported by RTEMS. This chapter describes the
contents, if any, for a particular processor type.
@subsection CPU Dependent Information Table
The XXX version of the RTEMS CPU Dependent
Information Table contains the information required to interface
a Board Support Package and RTEMS on the XXX. This
information is provided to allow RTEMS to interoperate
effectively with the BSP. The C structure definition is given
here:
@example
@group
typedef struct @{
uint32_t interrupt_stack_size;
/* end of fields required on all CPUs */
@} rtems_cpu_table;
@end group
@end example
@table @code
@item interrupt_stack_size
is the size of the RTEMS
allocated interrupt stack in bytes. This value must be at least
as large as MINIMUM_STACK_SIZE.
@end table

42
doc/cpu_supplement/i386.t
View File

@@ -574,45 +574,3 @@ requirements:
For more information regarding the i386s data structures and their
contents, refer to Intel's 386 Programmer's Reference Manual.
@c
@c COPYRIGHT (c) 1988-2002.
@c On-Line Applications Research Corporation (OAR).
@c All rights reserved.
@c
@c $Id$
@c
@section Processor Dependent Information Table
Any highly processor dependent information required
to describe a processor to RTEMS is provided in the CPU
Dependent Information Table. This table is not required for all
processors supported by RTEMS. This chapter describes the
contents, if any, for a particular processor type.
@subsection CPU Dependent Information Table
The i386 version of the RTEMS CPU Dependent
Information Table contains the information required to interface
a Board Support Package and RTEMS on the i386. This information
is provided to allow RTEMS to interoperate effectively with the
BSP. The C structure definition is given here:
@example
@group
typedef struct @{
uint32_t interrupt_stack_size;
/* end of fields required on all CPUs */
@} rtems_cpu_table;
@end group
@end example
@table @code
@item interrupt_stack_size
is the size of the RTEMS
allocated interrupt stack in bytes. This value must be at least
as large as MINIMUM_STACK_SIZE.
@end table

44
doc/cpu_supplement/m68k.t
View File

@@ -662,47 +662,3 @@ automatically as part of initialization. If the BSP does not
install an interrupt stack and -- for whatever reason -- an
interrupt occurs before initialize_executive is invoked, then
the results are unpredictable.
@c
@c COPYRIGHT (c) 1988-2002.
@c On-Line Applications Research Corporation (OAR).
@c All rights reserved.
@c
@c $Id$
@c
@section Processor Dependent Information Table
Any highly processor dependent information required
to describe a processor to RTEMS is provided in the CPU
Dependent Information Table. This table is not required for all
processors supported by RTEMS. This chapter describes the
contents, if any, for a particular processor type.
@subsection CPU Dependent Information Table
The MC68xxx version of the RTEMS CPU Dependent
Information Table contains the information required to interface
a Board Support Package and RTEMS on the MC68xxx. This
information is provided to allow RTEMS to interoperate
effectively with the BSP. The C structure definition is given
here:
@example
@group
typedef struct @{
unsigned32 interrupt_stack_size;
/* end of fields required on all CPUs */
@} rtems_cpu_table;
@end group
@end example
@table @code
@item interrupt_stack_size
is the size of the RTEMS
allocated interrupt stack in bytes. This value must be at least
as large as MINIMUM_STACK_SIZE.
@end table

44
doc/cpu_supplement/mips.t
View File

@@ -566,47 +566,3 @@ automatically as part of initialization. If the BSP does not
install an interrupt stack and -- for whatever reason -- an
interrupt occurs before initialize_executive is invoked, then
the results are unpredictable.
@c
@c COPYRIGHT (c) 1988-2002.
@c On-Line Applications Research Corporation (OAR).
@c All rights reserved.
@c
@c $Id$
@c
@section Processor Dependent Information Table
Any highly processor dependent information required
to describe a processor to RTEMS is provided in the CPU
Dependent Information Table. This table is not required for all
processors supported by RTEMS. This chapter describes the
contents, if any, for a particular processor type.
@subsection CPU Dependent Information Table
The XXX version of the RTEMS CPU Dependent
Information Table contains the information required to interface
a Board Support Package and RTEMS on the XXX. This
information is provided to allow RTEMS to interoperate
effectively with the BSP. The C structure definition is given
here:
@example
@group
typedef struct @{
unsigned32 interrupt_stack_size;
/* end of fields required on all CPUs */
@} rtems_cpu_table;
@end group
@end example
@table @code
@item interrupt_stack_size
is the size of the RTEMS
allocated interrupt stack in bytes. This value must be at least
as large as MINIMUM_STACK_SIZE.
@end table

38
doc/cpu_supplement/powerpc.t
View File

@@ -886,41 +886,3 @@ conditions can be properly handled.
handlers.
@end itemize
@c
@c COPYRIGHT (c) 1989-2007.
@c On-Line Applications Research Corporation (OAR).
@c All rights reserved.
@c
@c $Id$
@c
@section Processor Dependent Information Table
Any highly processor dependent information required
to describe a processor to RTEMS is provided in the CPU
Dependent Information Table. This table is not required for all
processors supported by RTEMS. This chapter describes the
contents, if any, for a particular processor type.
@subsection CPU Dependent Information Table
The PowerPC version of the RTEMS CPU Dependent
Information Table is given by the C structure definition is
shown below:
@example
typedef struct @{
unsigned32 interrupt_stack_size;
/* end of fields required on all CPUs */
@} rtems_cpu_table;
@end example
@table @code
@item interrupt_stack_size
is the size of the RTEMS allocated interrupt stack in bytes.
This value must be at least as large as MINIMUM_STACK_SIZE.
@end table

44
doc/cpu_supplement/sh.t
View File

@@ -574,47 +574,3 @@ automatically as part of initialization. If the BSP does not
install an interrupt stack and -- for whatever reason -- an
interrupt occurs before initialize_executive is invoked, then
the results are unpredictable.
@c
@c COPYRIGHT (c) 1988-2002.
@c On-Line Applications Research Corporation (OAR).
@c All rights reserved.
@c
@c $Id$
@c
@section Processor Dependent Information Table
Any highly processor dependent information required
to describe a processor to RTEMS is provided in the CPU
Dependent Information Table. This table is not required for all
processors supported by RTEMS. This chapter describes the
contents, if any, for a particular processor type.
@subsection CPU Dependent Information Table
The XXX version of the RTEMS CPU Dependent
Information Table contains the information required to interface
a Board Support Package and RTEMS on the XXX. This
information is provided to allow RTEMS to interoperate
effectively with the BSP. The C structure definition is given
here:
@example
@group
typedef struct @{
unsigned32 interrupt_stack_size;
/* end of fields required on all CPUs */
@} rtems_cpu_table;
@end group
@end example
@table @code
@item interrupt_stack_size
is the size of the RTEMS
allocated interrupt stack in bytes. This value must be at least
as large as MINIMUM_STACK_SIZE.
@end table

41
doc/cpu_supplement/sparc.t
View File

@@ -1023,44 +1023,3 @@ conditions can be properly handled.
least trap handlers for register window overflow and register
window underflow.
@end itemize
@c
@c COPYRIGHT (c) 1988-2002.
@c On-Line Applications Research Corporation (OAR).
@c All rights reserved.
@c
@c $Id$
@c
@section Processor Dependent Information Table
Any highly processor dependent information required
to describe a processor to RTEMS is provided in the CPU
Dependent Information Table. This table is not required for all
processors supported by RTEMS. This chapter describes the
contents, if any, for a particular processor type.
@subsection CPU Dependent Information Table
The SPARC version of the RTEMS CPU Dependent
Information Table is given by the C structure definition is
shown below:
@example
@group
typedef struct @{
unsigned32 interrupt_stack_size;
/* end of fields required on all CPUs */
@} rtems_cpu_table;
@end group
@end example
@table @code
@item interrupt_stack_size
is the size of the RTEMS allocated interrupt stack in bytes.
This value must be at least as large as MINIMUM_STACK_SIZE.
@end table

44
doc/cpu_supplement/tic4x.t
View File

@@ -777,47 +777,3 @@ automatically as part of initialization. If the BSP does not
install an interrupt stack and -- for whatever reason -- an
interrupt occurs before initialize_executive is invoked, then
the results are unpredictable.
@c
@c COPYRIGHT (c) 1988-1999.
@c On-Line Applications Research Corporation (OAR).
@c All rights reserved.
@c
@c $Id$
@c
@section Processor Dependent Information Table
Any highly processor dependent information required
to describe a processor to RTEMS is provided in the CPU
Dependent Information Table. This table is not required for all
processors supported by RTEMS. This chapter describes the
contents, if any, for a particular processor type.
@subsection CPU Dependent Information Table
The XXX version of the RTEMS CPU Dependent
Information Table contains the information required to interface
a Board Support Package and RTEMS on the XXX. This
information is provided to allow RTEMS to interoperate
effectively with the BSP. The C structure definition is given
here:
@example
@group
typedef struct @{
unsigned32 interrupt_stack_size;
/* end of fields required on all CPUs */
@} rtems_cpu_table;
@end group
@end example
@table @code
@item interrupt_stack_size
is the size of the RTEMS
allocated interrupt stack in bytes. This value must be at least
as large as MINIMUM_STACK_SIZE.
@end table