diff --git a/bsps/arm/altera-cyclone-v/config/altcycv_devkit.cfg b/bsps/arm/altera-cyclone-v/config/altcycv_devkit.cfg deleted file mode 100644 index ed54edfedd..0000000000 --- a/bsps/arm/altera-cyclone-v/config/altcycv_devkit.cfg +++ /dev/null @@ -1 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/altcycv.inc diff --git a/bsps/arm/atsam/config/atsamv.cfg b/bsps/arm/atsam/config/atsamv.cfg deleted file mode 100644 index 0a2437fa12..0000000000 --- a/bsps/arm/atsam/config/atsamv.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = arm - -CPU_CFLAGS = -mthumb -mcpu=cortex-m7 -mfpu=fpv5-d16 -mfloat-abi=hard - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/arm/beagle/config/beagleboardorig.cfg b/bsps/arm/beagle/config/beagleboardorig.cfg deleted file mode 100644 index 447a51e9f6..0000000000 --- a/bsps/arm/beagle/config/beagleboardorig.cfg +++ /dev/null @@ -1,2 +0,0 @@ -# Config file for Original BeagleBoard -include $(RTEMS_ROOT)/make/custom/beagle.inc diff --git a/bsps/arm/beagle/config/beagleboardxm.cfg b/bsps/arm/beagle/config/beagleboardxm.cfg deleted file mode 100644 index ec0d2d2bd8..0000000000 --- a/bsps/arm/beagle/config/beagleboardxm.cfg +++ /dev/null @@ -1,2 +0,0 @@ -# Config file for BeagleBoard XM -include $(RTEMS_ROOT)/make/custom/beagle.inc diff --git a/bsps/arm/beagle/config/beagleboneblack.cfg b/bsps/arm/beagle/config/beagleboneblack.cfg deleted file mode 100644 index f947dcef29..0000000000 --- a/bsps/arm/beagle/config/beagleboneblack.cfg +++ /dev/null @@ -1,2 +0,0 @@ -# Config file for BeagleBone Black -include $(RTEMS_ROOT)/make/custom/beagle.inc diff --git a/bsps/arm/beagle/config/beaglebonewhite.cfg b/bsps/arm/beagle/config/beaglebonewhite.cfg deleted file mode 100644 index 4b035c031e..0000000000 --- a/bsps/arm/beagle/config/beaglebonewhite.cfg +++ /dev/null @@ -1,2 +0,0 @@ -# Config file for Original BeagleBone (aka BeagleBone White) -include $(RTEMS_ROOT)/make/custom/beagle.inc diff --git a/bsps/arm/beagle/simscripts/bbxm.cfg b/bsps/arm/beagle/simscripts/bbxm.cfg deleted file mode 100644 index a5fe36cd01..0000000000 --- a/bsps/arm/beagle/simscripts/bbxm.cfg +++ /dev/null @@ -1,174 +0,0 @@ -# Start with: openocd -f interface/ftdi/flyswatter.cfg -f bbxm.cfg -c 'reset init' -# or with: openocd -f interface/ftdi/flyswatter2.cfg -f bbxm.cfg -c 'reset init' -source [find board/ti_beagleboard_xm.cfg] - -# -# Use the MLO file from uboot to initialise the board. -# -proc beagleboard_xm_mlo { file } { - global _CHIPNAME - adapter_khz 10 - catch { mww phys 0x48307250 0x00000004 } - reset init - icepick_c_wreset $_CHIPNAME.jrc - halt - dm37x.cpu arm core_state arm - puts "Beagleboard xM MLO: $file" - load_image $file 0x402005f8 bin - resume 0x40200800 - sleep 500 - halt -} - -proc beagleboard_xm_init {} { - global _CHIPNAME - adapter_khz 10 - catch { mww phys 0x48307250 0x00000004 } - reset init - icepick_c_wreset $_CHIPNAME.jrc - halt - dm37x.cpu arm core_state arm - - mwh 0x6e00007c 0x000000ff ;# omap-gpmc - mwh 0x6e00007c 0x00000090 ;# omap-gpmc - mwh 0x6e000080 0x00000000 ;# omap-gpmc - mwh 0x6e00007c 0x00000000 ;# omap-gpmc - mwh 0x6e000080 0x00000000 ;# omap-gpmc - mwh 0x6e000080 0x00000000 ;# omap-gpmc - mwh 0x6e000080 0x00000000 ;# omap-gpmc - mwh 0x6e000080 0x00000000 ;# omap-gpmc - mwh 0x6e000080 0x00000000 ;# omap-gpmc - mwh 0x6e00007c 0x00000030 ;# omap-gpmc - mww 0x48004c00 0x00000020 ;# omap3_cm - mww 0x48004c10 0x00000020 ;# omap3_cm - mww 0x48314048 0x0000aaaa ;# omap3_mpu_wdt - mww 0x48314048 0x00005555 ;# omap3_mpu_wdt - mww 0x6c000048 0xffffffff ;# omap3_sms - mww 0x48004c40 0x00000013 ;# omap3_cm - mww 0x48004c10 0x00000025 ;# omap3_cm - mww 0x48004c00 0x00000021 ;# omap3_cm - mww 0x48306d40 0x00000003 ;# omap3_prm - mww 0x48307270 0x00000083 ;# omap3_prm - mww 0x48307270 0x00000080 ;# omap3_prm - mww 0x48004904 0x00000015 ;# omap3_cm - mww 0x48004d00 0x00110016 ;# omap3_cm - mww 0x48005140 0x10020a50 ;# omap3_cm - mww 0x48004d40 0x08000040 ;# omap3_cm - mww 0x48004d40 0x09900040 ;# omap3_cm - mww 0x48004d40 0x09900c40 ;# omap3_cm - mww 0x48004d40 0x09900c00 ;# omap3_cm - mww 0x48004a40 0x00001305 ;# omap3_cm - mww 0x48004a40 0x00001125 ;# omap3_cm - mww 0x48004a40 0x00001109 ;# omap3_cm - mww 0x48004a40 0x0000110a ;# omap3_cm - mww 0x48004b40 0x00000005 ;# omap3_cm - mww 0x48004c40 0x00000015 ;# omap3_cm - mww 0x48004d00 0x00110006 ;# omap3_cm - mww 0x48004d00 0x00110007 ;# omap3_cm - mww 0x48004d00 0x00110007 ;# omap3_cm - mww 0x48005140 0x03020a50 ;# omap3_cm - mww 0x48004f40 0x00000004 ;# omap3_cm - mww 0x48004e40 0x00000409 ;# omap3_cm - mww 0x48004e40 0x00001009 ;# omap3_cm - mww 0x48004d48 0x00000009 ;# omap3_cm - mww 0x48004d44 0x02436000 ;# omap3_cm - mww 0x48004d44 0x0243600c ;# omap3_cm - mww 0x48004a40 0x0000110a ;# omap3_cm - mww 0x48004d00 0x00170007 ;# omap3_cm - mww 0x48004d04 0x00000011 ;# omap3_cm - mww 0x48004d50 0x00000001 ;# omap3_cm - mww 0x48004d4c 0x00007800 ;# omap3_cm - mww 0x48004d4c 0x0000780c ;# omap3_cm - mww 0x48004d00 0x00170037 ;# omap3_cm - mww 0x48004d04 0x00000017 ;# omap3_cm - mww 0x48004004 0x00000011 ;# omap3_cm - mww 0x48004044 0x00000001 ;# omap3_cm - mww 0x48004040 0x00081400 ;# omap3_cm - mww 0x48004040 0x00081400 ;# omap3_cm - mww 0x48004004 0x00000017 ;# omap3_cm - mww 0x48004944 0x00000001 ;# omap3_cm - mww 0x48004940 0x000a5800 ;# omap3_cm - mww 0x48004940 0x000a580c ;# omap3_cm - mww 0x48004904 0x00000017 ;# omap3_cm - mww 0x48005040 0x000000ff ;# omap3_cm - mww 0x48004c40 0x00000015 ;# omap3_cm - mww 0x48005040 0x000000ff ;# omap3_cm - mww 0x48005010 0x00000008 ;# omap3_cm - mww 0x48005000 0x00000008 ;# omap3_cm - mww 0x48004a00 0x00002000 ;# omap3_cm - mww 0x48004a10 0x00002042 ;# omap3_cm - mww 0x48005000 0x00000808 ;# omap3_cm - mww 0x48005010 0x00000808 ;# omap3_cm - mww 0x48004a00 0x0003a000 ;# omap3_cm - mww 0x48004a10 0x0003a042 ;# omap3_cm - mww 0x48004c10 0x00000025 ;# omap3_cm - mww 0x48004000 0x00000001 ;# omap3_cm - mww 0x48004a00 0x03fffe29 ;# omap3_cm - mww 0x48004a10 0x3ffffffb ;# omap3_cm - mww 0x48004a14 0x0000001f ;# omap3_cm - mww 0x48004c00 0x000000e9 ;# omap3_cm - mww 0x48004c10 0x0000003f ;# omap3_cm - mww 0x48004e00 0x00000005 ;# omap3_cm - mww 0x48004e10 0x00000001 ;# omap3_cm - mww 0x48004f00 0x00000001 ;# omap3_cm - mww 0x48004f10 0x00000001 ;# omap3_cm - mww 0x48005000 0x0003ffff ;# omap3_cm - mww 0x48005010 0x0003ffff ;# omap3_cm - mww 0x48005410 0x00000001 ;# omap3_cm - mww 0x48005400 0x00000003 ;# omap3_cm - mww 0x48004a18 0x00000004 ;# omap3_cm - mww 0x48004a08 0x00000004 ;# omap3_cm - mww 0x6e000060 0x00001800 ;# omap-gpmc - mww 0x6e000064 0x00141400 ;# omap-gpmc - mww 0x6e000068 0x00141400 ;# omap-gpmc - mww 0x6e00006c 0x0f010f01 ;# omap-gpmc - mww 0x6e000070 0x010c1414 ;# omap-gpmc - mww 0x6e000074 0x1f0f0a80 ;# omap-gpmc - mww 0x6e000078 0x00000870 ;# omap-gpmc - mwb 0x6e00007c 0x000000ff ;# omap-gpmc - mwb 0x6e00007c 0x00000070 ;# omap-gpmc - mwb 0x6e00007c 0x00000090 ;# omap-gpmc - mwb 0x6e000080 0x00000000 ;# omap-gpmc - mww 0x6d000010 0x00000002 ;# omap.sdrc - mww 0x6d000010 0x00000000 ;# omap.sdrc - mww 0x6d000044 0x00000100 ;# omap.sdrc - mww 0x6d000070 0x04000081 ;# omap.sdrc - mww 0x6d000060 0x0000000a ;# omap.sdrc - mww 0x6d000080 0x04590099 ;# omap.sdrc - mww 0x6d00009c 0xc29dc4c6 ;# omap.sdrc - mww 0x6d0000a0 0x00022322 ;# omap.sdrc - mww 0x6d0000a4 0x0004e201 ;# omap.sdrc - mww 0x6d0000a8 0x00000000 ;# omap.sdrc - mww 0x6d0000a8 0x00000001 ;# omap.sdrc - mww 0x6d0000a8 0x00000002 ;# omap.sdrc - mww 0x6d0000a8 0x00000002 ;# omap.sdrc - mww 0x6d000084 0x00000032 ;# omap.sdrc - mww 0x6d000040 0x00000004 ;# omap.sdrc - mww 0x6d0000b0 0x04590099 ;# omap.sdrc - mww 0x6d0000c4 0xc29dc4c6 ;# omap.sdrc - mww 0x6d0000c8 0x00022322 ;# omap.sdrc - mww 0x6d0000d4 0x0004e201 ;# omap.sdrc - mww 0x6d0000d8 0x00000000 ;# omap.sdrc - mww 0x6d0000d8 0x00000001 ;# omap.sdrc - mww 0x6d0000d8 0x00000002 ;# omap.sdrc - mww 0x6d0000d8 0x00000002 ;# omap.sdrc - mww 0x6d0000b4 0x00000032 ;# omap.sdrc - mww 0x6d0000b0 0x00000000 ;# omap.sdrc - mww 0x6e00001c 0x00000000 ;# omap-gpmc - mww 0x6e000040 0x00000000 ;# omap-gpmc - mww 0x6e000050 0x00000000 ;# omap-gpmc - mww 0x6e000078 0x00000000 ;# omap-gpmc - mww 0x6e000078 0x00000000 ;# omap-gpmc - mww 0x6e000060 0x00001800 ;# omap-gpmc - mww 0x6e000064 0x00141400 ;# omap-gpmc - mww 0x6e000068 0x00141400 ;# omap-gpmc - mww 0x6e00006c 0x0f010f01 ;# omap-gpmc - mww 0x6e000070 0x010c1414 ;# omap-gpmc - mww 0x6e000074 0x1f0f0a80 ;# omap-gpmc - mww 0x6e000078 0x00000870 ;# omap-gpmc - mww 0x48004a00 0x437ffe00 ;# omap3_cm - mww 0x48004a10 0x637ffed2 ;# omap3_cm - puts "Beagleboard xM initialised" -} - -init diff --git a/bsps/arm/csb336/config/csb336.cfg b/bsps/arm/csb336/config/csb336.cfg deleted file mode 100644 index d38e2e10b8..0000000000 --- a/bsps/arm/csb336/config/csb336.cfg +++ /dev/null @@ -1,18 +0,0 @@ -# -# Config file for Cogent CSB337 - AT91RM9200 SBC -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=arm - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=arm920 - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g - -# Add CFLAGS and LDFLAGS for compiling and linking with per item sections -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/arm/csb337/config/csb337.cfg b/bsps/arm/csb337/config/csb337.cfg deleted file mode 100644 index 97d9685c3d..0000000000 --- a/bsps/arm/csb337/config/csb337.cfg +++ /dev/null @@ -1,18 +0,0 @@ -# -# Config file for Cogent CSB337 - AT91RM9200 SBC -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=arm - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=arm920 - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g - -# Add CFLAGS and LDFLAGS for compiling and linking with per item sections -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/arm/csb337/config/csb637.cfg b/bsps/arm/csb337/config/csb637.cfg deleted file mode 100644 index 3f0832ba8a..0000000000 --- a/bsps/arm/csb337/config/csb637.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for Cogent CSB637 - AT91RM9200 SBC -# - -include $(RTEMS_ROOT)/make/custom/csb337.cfg diff --git a/bsps/arm/csb337/config/kit637_v6.cfg b/bsps/arm/csb337/config/kit637_v6.cfg deleted file mode 100644 index ac12a62906..0000000000 --- a/bsps/arm/csb337/config/kit637_v6.cfg +++ /dev/null @@ -1,6 +0,0 @@ -# -# Config file for Cogent KIT637_V6 (CSB637) - AT91RM9200 SBC -# As a KIT637, the package includes a number of peripherals -# not normally on a CSB637. - -include $(RTEMS_ROOT)/make/custom/csb337.cfg diff --git a/bsps/arm/edb7312/config/edb7312.cfg b/bsps/arm/edb7312/config/edb7312.cfg deleted file mode 100644 index 32dd537872..0000000000 --- a/bsps/arm/edb7312/config/edb7312.cfg +++ /dev/null @@ -1,19 +0,0 @@ -# -# Config file for Cirrus/Cogent EDB7312 eval board -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=arm - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -CPU_CFLAGS = -mcpu=arm7tdmi - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g - -# Add CFLAGS and LDFLAGS for compiling and linking with per item sections -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/arm/gumstix/config/gumstix.cfg b/bsps/arm/gumstix/config/gumstix.cfg deleted file mode 100644 index 664e42b365..0000000000 --- a/bsps/arm/gumstix/config/gumstix.cfg +++ /dev/null @@ -1,18 +0,0 @@ -# -# Config file for Gumstix (http://www.gumstix.com) -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=arm - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=xscale - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g - -# Add CFLAGS and LDFLAGS for compiling and linking with per item sections -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/arm/imx/config/imx7.cfg b/bsps/arm/imx/config/imx7.cfg deleted file mode 100644 index 059f54937b..0000000000 --- a/bsps/arm/imx/config/imx7.cfg +++ /dev/null @@ -1,16 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = arm - -CPU_CFLAGS = -march=armv7-a -mthumb -mfpu=neon -mfloat-abi=hard -mtune=cortex-a7 - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections - -# define bsp-post-link -# $(OBJCOPY) -O binary '$@' '$(basename $@).bin' -# gzip -f -9 '$(basename $@).bin' -# mkimage -A arm -O linux -T kernel -a 0x80200000 -e 0x80200000 -name '$(notdir $@)' -d '$(basename $@).bin.gz' '$(basename $@).img' -# $(default-bsp-post-link) -# endef diff --git a/bsps/arm/lm3s69xx/config/lm3s3749.cfg b/bsps/arm/lm3s69xx/config/lm3s3749.cfg deleted file mode 100644 index c9edf2baf6..0000000000 --- a/bsps/arm/lm3s69xx/config/lm3s3749.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LM3S3749. -# - -include $(RTEMS_ROOT)/make/custom/lm3s69xx.inc diff --git a/bsps/arm/lm3s69xx/config/lm3s6965.cfg b/bsps/arm/lm3s69xx/config/lm3s6965.cfg deleted file mode 100644 index cba7930d04..0000000000 --- a/bsps/arm/lm3s69xx/config/lm3s6965.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LM3S6965. -# - -include $(RTEMS_ROOT)/make/custom/lm3s69xx.inc diff --git a/bsps/arm/lm3s69xx/config/lm3s6965_qemu.cfg b/bsps/arm/lm3s69xx/config/lm3s6965_qemu.cfg deleted file mode 100644 index 0ef2615af6..0000000000 --- a/bsps/arm/lm3s69xx/config/lm3s6965_qemu.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for QEMU LM3S6965 emulation. -# - -include $(RTEMS_ROOT)/make/custom/lm3s69xx.inc diff --git a/bsps/arm/lm3s69xx/config/lm4f120.cfg b/bsps/arm/lm3s69xx/config/lm4f120.cfg deleted file mode 100644 index aa7961e6c7..0000000000 --- a/bsps/arm/lm3s69xx/config/lm4f120.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LM4F120XL. -# - -include $(RTEMS_ROOT)/make/custom/lm3s69xx.inc diff --git a/bsps/arm/lpc176x/config/lpc1768_mbed.cfg b/bsps/arm/lpc176x/config/lpc1768_mbed.cfg deleted file mode 100644 index f6aacf33b1..0000000000 --- a/bsps/arm/lpc176x/config/lpc1768_mbed.cfg +++ /dev/null @@ -1,22 +0,0 @@ -# -# Config file for mbed LPC1768 board. -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = arm - -CPU_CFLAGS = -mthumb -mcpu=cortex-m3 - -CFLAGS_OPTIMIZE_V = -O2 -ggdb3 -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections - -BINEXT?=.bin -# This defines the operations performed on the linked executable. -# is currently required. -define bsp-post-link - $(OBJCOPY) -O binary --strip-all \ - $(basename $@)$(EXEEXT) $(basename $@)$(BINEXT) - $(SIZE) $(basename $@)$(EXEEXT) -endef diff --git a/bsps/arm/lpc176x/config/lpc1768_mbed_ahb_ram.cfg b/bsps/arm/lpc176x/config/lpc1768_mbed_ahb_ram.cfg deleted file mode 100644 index e187d1ff30..0000000000 --- a/bsps/arm/lpc176x/config/lpc1768_mbed_ahb_ram.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for mbed LPC1768 board. -# - -include $(RTEMS_ROOT)/make/custom/lpc1768_mbed.cfg diff --git a/bsps/arm/lpc176x/config/lpc1768_mbed_ahb_ram_eth.cfg b/bsps/arm/lpc176x/config/lpc1768_mbed_ahb_ram_eth.cfg deleted file mode 100644 index e187d1ff30..0000000000 --- a/bsps/arm/lpc176x/config/lpc1768_mbed_ahb_ram_eth.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for mbed LPC1768 board. -# - -include $(RTEMS_ROOT)/make/custom/lpc1768_mbed.cfg diff --git a/bsps/arm/lpc24xx/config/lpc17xx_ea_ram.cfg b/bsps/arm/lpc24xx/config/lpc17xx_ea_ram.cfg deleted file mode 100644 index caaaf07639..0000000000 --- a/bsps/arm/lpc24xx/config/lpc17xx_ea_ram.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LPC1788 OEM Board from Embedded Artists. -# - -include $(RTEMS_ROOT)/make/custom/lpc17xx.inc diff --git a/bsps/arm/lpc24xx/config/lpc17xx_ea_rom_int.cfg b/bsps/arm/lpc24xx/config/lpc17xx_ea_rom_int.cfg deleted file mode 100644 index caaaf07639..0000000000 --- a/bsps/arm/lpc24xx/config/lpc17xx_ea_rom_int.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LPC1788 OEM Board from Embedded Artists. -# - -include $(RTEMS_ROOT)/make/custom/lpc17xx.inc diff --git a/bsps/arm/lpc24xx/config/lpc17xx_plx800_ram.cfg b/bsps/arm/lpc24xx/config/lpc17xx_plx800_ram.cfg deleted file mode 100644 index a3cf1f0816..0000000000 --- a/bsps/arm/lpc24xx/config/lpc17xx_plx800_ram.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LPC17XX (PLX800). -# - -include $(RTEMS_ROOT)/make/custom/lpc17xx.inc diff --git a/bsps/arm/lpc24xx/config/lpc17xx_plx800_rom_int.cfg b/bsps/arm/lpc24xx/config/lpc17xx_plx800_rom_int.cfg deleted file mode 100644 index a3cf1f0816..0000000000 --- a/bsps/arm/lpc24xx/config/lpc17xx_plx800_rom_int.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LPC17XX (PLX800). -# - -include $(RTEMS_ROOT)/make/custom/lpc17xx.inc diff --git a/bsps/arm/lpc24xx/config/lpc2362.cfg b/bsps/arm/lpc24xx/config/lpc2362.cfg deleted file mode 100644 index d5fc413191..0000000000 --- a/bsps/arm/lpc24xx/config/lpc2362.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LPC2362. -# - -include $(RTEMS_ROOT)/make/custom/lpc24xx.inc diff --git a/bsps/arm/lpc24xx/config/lpc23xx_tli800.cfg b/bsps/arm/lpc24xx/config/lpc23xx_tli800.cfg deleted file mode 100644 index a7e7ef34b8..0000000000 --- a/bsps/arm/lpc24xx/config/lpc23xx_tli800.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for TLI800. -# - -include $(RTEMS_ROOT)/make/custom/lpc24xx.inc diff --git a/bsps/arm/lpc24xx/config/lpc24xx_ea.cfg b/bsps/arm/lpc24xx/config/lpc24xx_ea.cfg deleted file mode 100644 index 813fcb8cb6..0000000000 --- a/bsps/arm/lpc24xx/config/lpc24xx_ea.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Config file for LPC24XX (QVGA Base Board from Embedded Artists). -# - -include $(RTEMS_ROOT)/make/custom/lpc24xx.inc - -# define bsp-post-link -# $(OBJCOPY) -O binary '$@' '$(basename $@).bin' -# gzip -f -9 '$(basename $@).bin' -# mkimage -A arm -O rtems -T kernel -C gzip -a a0000000 -e a0000040 -name '$(notdir $@)' -d '$(basename $@).bin.gz' '$(basename $@).img' -# $(default-bsp-post-link) -# endef diff --git a/bsps/arm/lpc24xx/config/lpc24xx_ncs_ram.cfg b/bsps/arm/lpc24xx/config/lpc24xx_ncs_ram.cfg deleted file mode 100644 index a629a4f497..0000000000 --- a/bsps/arm/lpc24xx/config/lpc24xx_ncs_ram.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LPC24XX (NCS). -# - -include $(RTEMS_ROOT)/make/custom/lpc24xx.inc diff --git a/bsps/arm/lpc24xx/config/lpc24xx_ncs_rom_ext.cfg b/bsps/arm/lpc24xx/config/lpc24xx_ncs_rom_ext.cfg deleted file mode 100644 index a629a4f497..0000000000 --- a/bsps/arm/lpc24xx/config/lpc24xx_ncs_rom_ext.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LPC24XX (NCS). -# - -include $(RTEMS_ROOT)/make/custom/lpc24xx.inc diff --git a/bsps/arm/lpc24xx/config/lpc24xx_ncs_rom_int.cfg b/bsps/arm/lpc24xx/config/lpc24xx_ncs_rom_int.cfg deleted file mode 100644 index a629a4f497..0000000000 --- a/bsps/arm/lpc24xx/config/lpc24xx_ncs_rom_int.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LPC24XX (NCS). -# - -include $(RTEMS_ROOT)/make/custom/lpc24xx.inc diff --git a/bsps/arm/lpc24xx/config/lpc24xx_plx800_ram.cfg b/bsps/arm/lpc24xx/config/lpc24xx_plx800_ram.cfg deleted file mode 100644 index 6e25ad5dc2..0000000000 --- a/bsps/arm/lpc24xx/config/lpc24xx_plx800_ram.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LPC24XX (PLX800). -# - -include $(RTEMS_ROOT)/make/custom/lpc24xx.inc diff --git a/bsps/arm/lpc24xx/config/lpc24xx_plx800_rom_int.cfg b/bsps/arm/lpc24xx/config/lpc24xx_plx800_rom_int.cfg deleted file mode 100644 index 6e25ad5dc2..0000000000 --- a/bsps/arm/lpc24xx/config/lpc24xx_plx800_rom_int.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LPC24XX (PLX800). -# - -include $(RTEMS_ROOT)/make/custom/lpc24xx.inc diff --git a/bsps/arm/lpc24xx/config/lpc40xx_ea_ram.cfg b/bsps/arm/lpc24xx/config/lpc40xx_ea_ram.cfg deleted file mode 100644 index 4c4eb4d360..0000000000 --- a/bsps/arm/lpc24xx/config/lpc40xx_ea_ram.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LPC40XX OEM Board from Embedded Artists. -# - -include $(RTEMS_ROOT)/make/custom/lpc40xx.inc diff --git a/bsps/arm/lpc24xx/config/lpc40xx_ea_rom_int.cfg b/bsps/arm/lpc24xx/config/lpc40xx_ea_rom_int.cfg deleted file mode 100644 index 4c4eb4d360..0000000000 --- a/bsps/arm/lpc24xx/config/lpc40xx_ea_rom_int.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for LPC40XX OEM Board from Embedded Artists. -# - -include $(RTEMS_ROOT)/make/custom/lpc40xx.inc diff --git a/bsps/arm/lpc32xx/config/lpc32xx_mzx.cfg b/bsps/arm/lpc32xx/config/lpc32xx_mzx.cfg deleted file mode 100644 index 343fddef67..0000000000 --- a/bsps/arm/lpc32xx/config/lpc32xx_mzx.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for MZX application. -# - -include $(RTEMS_ROOT)/make/custom/lpc32xx.inc diff --git a/bsps/arm/lpc32xx/config/lpc32xx_mzx_stage_1.cfg b/bsps/arm/lpc32xx/config/lpc32xx_mzx_stage_1.cfg deleted file mode 100644 index b3838ab904..0000000000 --- a/bsps/arm/lpc32xx/config/lpc32xx_mzx_stage_1.cfg +++ /dev/null @@ -1,7 +0,0 @@ -# -# Config file for MZX stage-1 program. -# - -CFLAGS_OPTIMIZE_V = -Os -g - -include $(RTEMS_ROOT)/make/custom/lpc32xx.inc diff --git a/bsps/arm/lpc32xx/config/lpc32xx_mzx_stage_2.cfg b/bsps/arm/lpc32xx/config/lpc32xx_mzx_stage_2.cfg deleted file mode 100644 index 586ddbec9c..0000000000 --- a/bsps/arm/lpc32xx/config/lpc32xx_mzx_stage_2.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for MZX stage-2 program. -# - -include $(RTEMS_ROOT)/make/custom/lpc32xx.inc diff --git a/bsps/arm/lpc32xx/config/lpc32xx_phycore.cfg b/bsps/arm/lpc32xx/config/lpc32xx_phycore.cfg deleted file mode 100644 index 5c5c56734e..0000000000 --- a/bsps/arm/lpc32xx/config/lpc32xx_phycore.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for Phycore LPC3250 board. -# - -include $(RTEMS_ROOT)/make/custom/lpc32xx.inc diff --git a/bsps/arm/raspberrypi/config/raspberrypi.cfg b/bsps/arm/raspberrypi/config/raspberrypi.cfg deleted file mode 100644 index 759b79d8f6..0000000000 --- a/bsps/arm/raspberrypi/config/raspberrypi.cfg +++ /dev/null @@ -1,7 +0,0 @@ -# -# Config file for RASPBERRYPI -# -include $(RTEMS_ROOT)/make/custom/raspberrypi.inc - -CPU_CFLAGS = -mcpu=arm1176jzf-s - diff --git a/bsps/arm/raspberrypi/config/raspberrypi2.cfg b/bsps/arm/raspberrypi/config/raspberrypi2.cfg deleted file mode 100644 index a233d3461d..0000000000 --- a/bsps/arm/raspberrypi/config/raspberrypi2.cfg +++ /dev/null @@ -1,6 +0,0 @@ -# -# Config file for RASPBERRYPI 2 -# -include $(RTEMS_ROOT)/make/custom/raspberrypi.inc - -CPU_CFLAGS = -march=armv7-a -mthumb -mfpu=neon -mfloat-abi=hard -mtune=cortex-a7 diff --git a/bsps/arm/realview-pbx-a9/config/realview_pbx_a9_qemu.cfg b/bsps/arm/realview-pbx-a9/config/realview_pbx_a9_qemu.cfg deleted file mode 100644 index f6875451cd..0000000000 --- a/bsps/arm/realview-pbx-a9/config/realview_pbx_a9_qemu.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = arm - -CPU_CFLAGS = -march=armv7-a -mthumb -mfpu=neon -mfloat-abi=hard -mtune=cortex-a9 - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O0 -g -ffunction-sections -fdata-sections diff --git a/bsps/arm/rtl22xx/config/rtl22xx.cfg b/bsps/arm/rtl22xx/config/rtl22xx.cfg deleted file mode 100644 index 9b195477f8..0000000000 --- a/bsps/arm/rtl22xx/config/rtl22xx.cfg +++ /dev/null @@ -1,21 +0,0 @@ -# -# Config file for LPC22xx board -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=arm - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -CPU_CFLAGS = -mcpu=arm7tdmi - -# optimize flag: typically -0, could use -O4 or -fast -# -O4 is ok for RTEMS -# NOTE2: some level of -O may be actually required by inline assembler (at least -# -O2 so far. -CFLAGS_OPTIMIZE_V = -Os -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/arm/rtl22xx/config/rtl22xx_t.cfg b/bsps/arm/rtl22xx/config/rtl22xx_t.cfg deleted file mode 100644 index b89ad7bc83..0000000000 --- a/bsps/arm/rtl22xx/config/rtl22xx_t.cfg +++ /dev/null @@ -1,15 +0,0 @@ -# -# Config file for LPC22xx board in Thumb mode -# - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# - -include $(RTEMS_ROOT)/make/custom/rtl22xx.cfg - -CPU_CFLAGS += -mthumb - -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/arm/smdk2410/config/smdk2410.cfg b/bsps/arm/smdk2410/config/smdk2410.cfg deleted file mode 100644 index 26536723be..0000000000 --- a/bsps/arm/smdk2410/config/smdk2410.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# -# Config file for ARM smdk2410 -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=arm - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=arm920t - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/arm/stm32f4/config/stm32f105rc.cfg b/bsps/arm/stm32f4/config/stm32f105rc.cfg deleted file mode 100644 index 750ade24e4..0000000000 --- a/bsps/arm/stm32f4/config/stm32f105rc.cfg +++ /dev/null @@ -1,10 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = arm - -CPU_CFLAGS = -mthumb -mcpu=cortex-m3 - -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/arm/stm32f4/config/stm32f4.cfg b/bsps/arm/stm32f4/config/stm32f4.cfg deleted file mode 100644 index 3a6982b23c..0000000000 --- a/bsps/arm/stm32f4/config/stm32f4.cfg +++ /dev/null @@ -1,10 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = arm - -CPU_CFLAGS = -mthumb -mcpu=cortex-m4 - -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/arm/tms570/config/tms570ls3137_hdk.cfg b/bsps/arm/tms570/config/tms570ls3137_hdk.cfg deleted file mode 100644 index d769895360..0000000000 --- a/bsps/arm/tms570/config/tms570ls3137_hdk.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for TMS570LS3137 board. -# - -include $(RTEMS_ROOT)/make/custom/tms570ls3137.inc diff --git a/bsps/arm/tms570/config/tms570ls3137_hdk_intram.cfg b/bsps/arm/tms570/config/tms570ls3137_hdk_intram.cfg deleted file mode 100644 index d769895360..0000000000 --- a/bsps/arm/tms570/config/tms570ls3137_hdk_intram.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for TMS570LS3137 board. -# - -include $(RTEMS_ROOT)/make/custom/tms570ls3137.inc diff --git a/bsps/arm/tms570/config/tms570ls3137_hdk_sdram.cfg b/bsps/arm/tms570/config/tms570ls3137_hdk_sdram.cfg deleted file mode 100644 index d769895360..0000000000 --- a/bsps/arm/tms570/config/tms570ls3137_hdk_sdram.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for TMS570LS3137 board. -# - -include $(RTEMS_ROOT)/make/custom/tms570ls3137.inc diff --git a/bsps/arm/tms570/config/tms570ls3137_hdk_with_loader.cfg b/bsps/arm/tms570/config/tms570ls3137_hdk_with_loader.cfg deleted file mode 100644 index d769895360..0000000000 --- a/bsps/arm/tms570/config/tms570ls3137_hdk_with_loader.cfg +++ /dev/null @@ -1,5 +0,0 @@ -# -# Config file for TMS570LS3137 board. -# - -include $(RTEMS_ROOT)/make/custom/tms570ls3137.inc diff --git a/bsps/arm/xen/config/xen_virtual.cfg b/bsps/arm/xen/config/xen_virtual.cfg deleted file mode 100644 index 1b5031c3f0..0000000000 --- a/bsps/arm/xen/config/xen_virtual.cfg +++ /dev/null @@ -1,14 +0,0 @@ -# -# Configuration file for the "xen_virtual" target -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = arm - -CPU_CFLAGS = -march=armv7-a -mthumb -mfpu=neon -mfloat-abi=hard - -CFLAGS_OPTIMIZE_V += -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/arm/xilinx-zynq/config/xilinx_zynq_a9_qemu.cfg b/bsps/arm/xilinx-zynq/config/xilinx_zynq_a9_qemu.cfg deleted file mode 100644 index 013ae6f485..0000000000 --- a/bsps/arm/xilinx-zynq/config/xilinx_zynq_a9_qemu.cfg +++ /dev/null @@ -1,10 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = arm - -CPU_CFLAGS = -march=armv7-a -mthumb -mfpu=neon -mfloat-abi=hard -mtune=cortex-a9 - -CFLAGS_OPTIMIZE_V ?= -O0 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/arm/xilinx-zynq/config/xilinx_zynq_microzed.cfg b/bsps/arm/xilinx-zynq/config/xilinx_zynq_microzed.cfg deleted file mode 100755 index 2de871d46e..0000000000 --- a/bsps/arm/xilinx-zynq/config/xilinx_zynq_microzed.cfg +++ /dev/null @@ -1 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/xilinx_zynq.inc diff --git a/bsps/arm/xilinx-zynq/config/xilinx_zynq_picozed.cfg b/bsps/arm/xilinx-zynq/config/xilinx_zynq_picozed.cfg deleted file mode 100755 index 2de871d46e..0000000000 --- a/bsps/arm/xilinx-zynq/config/xilinx_zynq_picozed.cfg +++ /dev/null @@ -1 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/xilinx_zynq.inc diff --git a/bsps/arm/xilinx-zynq/config/xilinx_zynq_pynq.cfg b/bsps/arm/xilinx-zynq/config/xilinx_zynq_pynq.cfg deleted file mode 100755 index 2de871d46e..0000000000 --- a/bsps/arm/xilinx-zynq/config/xilinx_zynq_pynq.cfg +++ /dev/null @@ -1 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/xilinx_zynq.inc diff --git a/bsps/arm/xilinx-zynq/config/xilinx_zynq_zc702.cfg b/bsps/arm/xilinx-zynq/config/xilinx_zynq_zc702.cfg deleted file mode 100644 index 2de871d46e..0000000000 --- a/bsps/arm/xilinx-zynq/config/xilinx_zynq_zc702.cfg +++ /dev/null @@ -1 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/xilinx_zynq.inc diff --git a/bsps/arm/xilinx-zynq/config/xilinx_zynq_zc706.cfg b/bsps/arm/xilinx-zynq/config/xilinx_zynq_zc706.cfg deleted file mode 100644 index 2de871d46e..0000000000 --- a/bsps/arm/xilinx-zynq/config/xilinx_zynq_zc706.cfg +++ /dev/null @@ -1 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/xilinx_zynq.inc diff --git a/bsps/arm/xilinx-zynq/config/xilinx_zynq_zedboard.cfg b/bsps/arm/xilinx-zynq/config/xilinx_zynq_zedboard.cfg deleted file mode 100644 index 2de871d46e..0000000000 --- a/bsps/arm/xilinx-zynq/config/xilinx_zynq_zedboard.cfg +++ /dev/null @@ -1 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/xilinx_zynq.inc diff --git a/bsps/arm/xilinx-zynq/config/xilinx_zynq_zybo.cfg b/bsps/arm/xilinx-zynq/config/xilinx_zynq_zybo.cfg deleted file mode 100755 index 2de871d46e..0000000000 --- a/bsps/arm/xilinx-zynq/config/xilinx_zynq_zybo.cfg +++ /dev/null @@ -1 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/xilinx_zynq.inc diff --git a/bsps/arm/xilinx-zynq/config/xilinx_zynq_zybo_z7.cfg b/bsps/arm/xilinx-zynq/config/xilinx_zynq_zybo_z7.cfg deleted file mode 100755 index 2de871d46e..0000000000 --- a/bsps/arm/xilinx-zynq/config/xilinx_zynq_zybo_z7.cfg +++ /dev/null @@ -1 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/xilinx_zynq.inc diff --git a/bsps/arm/xilinx-zynqmp/config/xilinx_zynqmp_ultra96.cfg b/bsps/arm/xilinx-zynqmp/config/xilinx_zynqmp_ultra96.cfg deleted file mode 100644 index 42450ad32c..0000000000 --- a/bsps/arm/xilinx-zynqmp/config/xilinx_zynqmp_ultra96.cfg +++ /dev/null @@ -1 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/xilinx_zynqmp.inc diff --git a/bsps/i386/pc386/config/pc386.cfg b/bsps/i386/pc386/config/pc386.cfg deleted file mode 100644 index acce6ecca4..0000000000 --- a/bsps/i386/pc386/config/pc386.cfg +++ /dev/null @@ -1,33 +0,0 @@ -# -# Config file for the PC 386 BSP -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=i386 - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -# NOTE: CPU_CFLAGS is set by pc386 variants. -ifeq ($(CPU_CFLAGS),) - CPU_CFLAGS = -mtune=i386 -endif - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections -#+--------------------------------------------------------------------------+ -#| Set the value of RELOCADDR to the address where you want your image to -#| load. If you'll be using GRUB to load the images it will have to be >= -#| 0x100000 (1024K). If you are using NetBoot to load the images it can be -#| >= 0x10000 (64K) AND <= 0x97C00 (607K) OR >= 0x100000 (1024K). The memory -#| top is of course another limit. Make sure there is enough space before the -#| upper memory limits for the image and the memory allocated by it to fit. -#| Make sure the value you choose is aligned to 4 bytes. -#+--------------------------------------------------------------------------+ - RELOCADDR=0x00100000 - -LDFLAGS += -Wl,-Ttext,$(RELOCADDR) diff --git a/bsps/i386/pc386/config/pc486.cfg b/bsps/i386/pc386/config/pc486.cfg deleted file mode 100644 index baab16dc32..0000000000 --- a/bsps/i386/pc386/config/pc486.cfg +++ /dev/null @@ -1,10 +0,0 @@ -# -# Configuration file for a PC using an i486DX Class CPU -# - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mtune=i486 - -include $(RTEMS_ROOT)/make/custom/pc386.cfg - diff --git a/bsps/i386/pc386/config/pc586-sse.cfg b/bsps/i386/pc386/config/pc586-sse.cfg deleted file mode 100644 index 764c40c44e..0000000000 --- a/bsps/i386/pc386/config/pc586-sse.cfg +++ /dev/null @@ -1,9 +0,0 @@ -# -# Configuration file for a PC using a Pentium Class CPU -# - -# This configuration is useful for SMP testing on Qemu -CPU_CFLAGS = -mtune=pentium -march=pentium -msse2 - -include $(RTEMS_ROOT)/make/custom/pc386.cfg - diff --git a/bsps/i386/pc386/config/pc586.cfg b/bsps/i386/pc386/config/pc586.cfg deleted file mode 100644 index 35733a3cde..0000000000 --- a/bsps/i386/pc386/config/pc586.cfg +++ /dev/null @@ -1,10 +0,0 @@ -# -# Configuration file for a PC using a Pentium Class CPU -# - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mtune=pentium -march=pentium - -include $(RTEMS_ROOT)/make/custom/pc386.cfg - diff --git a/bsps/i386/pc386/config/pc686.cfg b/bsps/i386/pc386/config/pc686.cfg deleted file mode 100644 index fc63cde789..0000000000 --- a/bsps/i386/pc386/config/pc686.cfg +++ /dev/null @@ -1,10 +0,0 @@ -# -# Configuration file for a PC using a PentiumPro Class CPU -# - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mtune=pentiumpro -march=pentium - -include $(RTEMS_ROOT)/make/custom/pc386.cfg - diff --git a/bsps/i386/pc386/config/pcp4.cfg b/bsps/i386/pc386/config/pcp4.cfg deleted file mode 100644 index 75ec7d4666..0000000000 --- a/bsps/i386/pc386/config/pcp4.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# -# Configuration file for a PC using a Pentium Class CPU -# - -# Note: We give the -mtune=pentium option here only so that at least the -# variant optimized for pentium (w/o using any pentium-specific -# features) is used (assuming you use the vanilla RTEMS multilibs). -# -# And: The only sse-related feature the RTEMS support really needs is -# fxsave/fxrstor. You can build with -msse, -msse2 or -msse3, -# depending on your CPU. -# There are run-time checks resulting in a 'panic' if code -# compiled for e.g. -msse3 is executed on a CPU that only -# supports sse2, though. -CPU_CFLAGS = -mtune=pentium4 -march=pentium4 -msse3 - -include $(RTEMS_ROOT)/make/custom/pc386.cfg diff --git a/bsps/m68k/av5282/config/av5282.cfg b/bsps/m68k/av5282/config/av5282.cfg deleted file mode 100644 index 4a407b5131..0000000000 --- a/bsps/m68k/av5282/config/av5282.cfg +++ /dev/null @@ -1,30 +0,0 @@ -# -# Config file for the uC5282 BSP -# - -RTEMS_CPU=m68k - -include $(RTEMS_ROOT)/make/custom/default.cfg - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=528x - - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -fomit-frame-pointer - -# FIXME: Disabled because linkcmds lacks proper KEEP() directives. See #2574. -# The following two lines enable compiling and linking on per element. -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections - -ifndef MTARGET -MTARGET=ram -endif - -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary --strip-all \ - $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT) -endef diff --git a/bsps/m68k/genmcf548x/config/COBRA5475.cfg b/bsps/m68k/genmcf548x/config/COBRA5475.cfg deleted file mode 100644 index 1c27ee9741..0000000000 --- a/bsps/m68k/genmcf548x/config/COBRA5475.cfg +++ /dev/null @@ -1,10 +0,0 @@ -# -# Config file for COBRA5475 module -# - -# -# All genmcf548x configurations share the same base file, only a few -# parameters differ. -# - -include $(RTEMS_ROOT)/make/custom/genmcf548x.inc diff --git a/bsps/m68k/genmcf548x/config/m5484FireEngine.cfg b/bsps/m68k/genmcf548x/config/m5484FireEngine.cfg deleted file mode 100644 index 7322a36c9f..0000000000 --- a/bsps/m68k/genmcf548x/config/m5484FireEngine.cfg +++ /dev/null @@ -1,10 +0,0 @@ -# -# Config file for freescale's M5484FireEngine evaluation board -# - -# -# All genmcf548x configurations share the same base file, only a few -# parameters differ. -# - -include $(RTEMS_ROOT)/make/custom/genmcf548x.inc diff --git a/bsps/m68k/mcf5235/config/mcf5235.cfg b/bsps/m68k/mcf5235/config/mcf5235.cfg deleted file mode 100644 index cf838b11e5..0000000000 --- a/bsps/m68k/mcf5235/config/mcf5235.cfg +++ /dev/null @@ -1,31 +0,0 @@ -# -# Config file for the mcf5235 BSP -# - -RTEMS_CPU=m68k - -include $(RTEMS_ROOT)/make/custom/default.cfg - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=5235 - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -fomit-frame-pointer - -# FIXME: Disabled because linkcmds lacks proper KEEP() directives. See #2571. -# The following two lines enable compiling and linking on per element. -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections - -ifndef MTARGET -MTARGET=ram -endif - -# This defines the operations performed on the linked executable. -# is currently required. -define bsp-post-link - $(OBJCOPY) -O binary --strip-all \ - $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT) - $(SIZE) $(basename $@)$(EXEEXT) -endef diff --git a/bsps/m68k/mcf5329/config/mcf5329.cfg b/bsps/m68k/mcf5329/config/mcf5329.cfg deleted file mode 100644 index bd2249a484..0000000000 --- a/bsps/m68k/mcf5329/config/mcf5329.cfg +++ /dev/null @@ -1,29 +0,0 @@ -# -# Config file for the mcf5329 BSP -# - - -RTEMS_CPU=m68k - -include $(RTEMS_ROOT)/make/custom/default.cfg - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -#CPU_CFLAGS = -mcpu=5329 -CPU_CFLAGS = -mcpu=5307 - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -fomit-frame-pointer - -# FIXME: Disabled because linkcmds lacks proper KEEP() directives. See #2569. -# The following two lines enable compiling and linking on per element. -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections - -# This defines the operations performed on the linked executable. -# is currently required. -define bsp-post-link - $(OBJCOPY) -O binary --strip-all \ - $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT) - $(SIZE) $(basename $@)$(EXEEXT) -endef diff --git a/bsps/m68k/uC5282/config/uC5282.cfg b/bsps/m68k/uC5282/config/uC5282.cfg deleted file mode 100644 index 051d5a4c1d..0000000000 --- a/bsps/m68k/uC5282/config/uC5282.cfg +++ /dev/null @@ -1,24 +0,0 @@ -# -# Config file for the uC5282 BSP -# - -RTEMS_CPU = m68k - -include $(RTEMS_ROOT)/make/custom/default.cfg - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=5282 - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g - -# FIXME: Disabled because linkcmds lacks proper KEEP() directives. See #2575. -# The following two lines enable compiling and linking on per element. -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections - -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT) -endef diff --git a/bsps/mips/csb350/config/csb350.cfg b/bsps/mips/csb350/config/csb350.cfg deleted file mode 100644 index f6d50662b0..0000000000 --- a/bsps/mips/csb350/config/csb350.cfg +++ /dev/null @@ -1,19 +0,0 @@ -# -# Config file for the Cogent CSB350 board -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=mips - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -# gcc 3.1 and newer -CPU_CFLAGS = -mips32 -G0 -msoft-float - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/mips/hurricane/config/hurricane.cfg b/bsps/mips/hurricane/config/hurricane.cfg deleted file mode 100644 index 7b1119e054..0000000000 --- a/bsps/mips/hurricane/config/hurricane.cfg +++ /dev/null @@ -1,15 +0,0 @@ -# -# Config file for the Quick Logic Hurricane evaluation board with PMC-Sierra RM5231 cpu -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mips3 -G0 -EL - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -fomit-frame-pointer -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/mips/jmr3904/config/jmr3904.cfg b/bsps/mips/jmr3904/config/jmr3904.cfg deleted file mode 100644 index ed4e6b3be0..0000000000 --- a/bsps/mips/jmr3904/config/jmr3904.cfg +++ /dev/null @@ -1,16 +0,0 @@ -# -# Config file for the jmr3904 board which has a simulator in gdb -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=mips - -CPU_CFLAGS = -march=r3900 -Wa,-xgot -G0 - -CFLAGS_OPTIMIZE_V = -O2 -g - -# arguments to compile and link with per-element sections -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections - diff --git a/bsps/mips/malta/config/malta.cfg b/bsps/mips/malta/config/malta.cfg deleted file mode 100644 index a25abcc911..0000000000 --- a/bsps/mips/malta/config/malta.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# -# Config file for the MIPS Malta board with 24kf CPU -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=mips - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -march=24kf1_1 -Wa,-xgot -G0 - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O0 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/mips/rbtx4925/config/rbtx4925.cfg b/bsps/mips/rbtx4925/config/rbtx4925.cfg deleted file mode 100644 index b3d04cff37..0000000000 --- a/bsps/mips/rbtx4925/config/rbtx4925.cfg +++ /dev/null @@ -1,15 +0,0 @@ -# -# Config file for the Toshiba RBTX4925 evaluation board with TX4925 cpu -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mips3 -G0 -EL - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -fomit-frame-pointer -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/mips/rbtx4938/config/rbtx4938.cfg b/bsps/mips/rbtx4938/config/rbtx4938.cfg deleted file mode 100644 index 42cdf17a04..0000000000 --- a/bsps/mips/rbtx4938/config/rbtx4938.cfg +++ /dev/null @@ -1,20 +0,0 @@ -# -# Config file for the Toshiba RBTX4938 evaluation board with TX4938 cpu -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mips3 -G0 -EL - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -fomit-frame-pointer -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -define bsp-post-link - $(OBJCOPY) --srec-len=30 -O srec $@ $(basename $@)$(DOWNEXT) - $(default-bsp-post-link) -endef diff --git a/bsps/moxie/moxiesim/config/moxiesim.cfg b/bsps/moxie/moxiesim/config/moxiesim.cfg deleted file mode 100644 index 4d924d9c76..0000000000 --- a/bsps/moxie/moxiesim/config/moxiesim.cfg +++ /dev/null @@ -1,14 +0,0 @@ -# -# Config file for the moxie simulator in gdb. -# -# $Id: moxiesxsim.cfg,v 1.2 2009/10/21 10:41:27 ralf Exp $ -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=moxie - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -Os -g -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/nios2/nios2_iss/config/nios2_iss.cfg b/bsps/nios2/nios2_iss/config/nios2_iss.cfg deleted file mode 100644 index f7103703ce..0000000000 --- a/bsps/nios2/nios2_iss/config/nios2_iss.cfg +++ /dev/null @@ -1,29 +0,0 @@ -# -# Config file for the NIOS2_EB2_1 BSP -# - -# Choices for CPU_MODEL: -# tiny (no cache) -# standard (instruction cache) -# fast (instruction and data cache) - -RTEMS_CPU = nios2 - -include $(RTEMS_ROOT)/make/custom/default.cfg - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mno-hw-mul -mno-hw-div - -# optimize flag: typically -O2 -# ATM, doesn't work with optimization levels > 0 -CFLAGS_OPTIMIZE_V = -O0 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -define bsp-post-link - $(OBJCOPY) -O binary --strip-all $(basename $@)$(EXEEXT) \ - -R entry -R exceptions $(basename $@)$(DOWNEXT) - $(default-bsp-post-link) -endef diff --git a/bsps/no_cpu/no_bsp/config/no_bsp.cfg b/bsps/no_cpu/no_bsp/config/no_bsp.cfg deleted file mode 100644 index 15e2f29bff..0000000000 --- a/bsps/no_cpu/no_bsp/config/no_bsp.cfg +++ /dev/null @@ -1,13 +0,0 @@ -# -# Configuration file for the "no_bsp" board -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=no_cpu - -# Miscellaneous additions go here. Typical options usually look like -CFLAGS_OPTIMIZE_V += -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/or1k/generic_or1k/config/generic_or1k.cfg b/bsps/or1k/generic_or1k/config/generic_or1k.cfg deleted file mode 100644 index 9a00643bce..0000000000 --- a/bsps/or1k/generic_or1k/config/generic_or1k.cfg +++ /dev/null @@ -1,10 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = or1k - -CPU_CFLAGS = -O2 - -CFLAGS_OPTIMIZE_V ?= -O0 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/or1k/generic_or1k/sim.cfg b/bsps/or1k/generic_or1k/sim.cfg deleted file mode 100644 index 1032f0d4ce..0000000000 --- a/bsps/or1k/generic_or1k/sim.cfg +++ /dev/null @@ -1,105 +0,0 @@ -section memory - name = "RAM" - random_seed = 12345 - type = random - ce = 0 - mc = 0 - baseaddr = 0x00000000 - size = 0x08000000 - delayr = 1 - delayw = 2 -end - -section immu - enabled = 0 - nsets = 64 - nways = 1 - pagesize = 8192 - hitdelay = 0 - missdelay = 0 -end - -section dmmu - enabled = 0 - nsets = 64 - nways = 1 - pagesize = 8192 - hitdelay = 0 - missdelay = 0 -end -section mc - enabled = 0 - baseaddr = 0x90000000 - POC = 0x0000000a /* 32 bit SSRAM */ - index = 0 -end - -section ic - enabled = 1 - nsets = 256 - nways = 1 - blocksize = 32 - hitdelay = 20 - missdelay = 60 -end - -section dc - enabled = 1 - nsets = 256 - nways = 1 - blocksize = 32 - load_hitdelay = 40 - load_missdelay = 120 - store_hitdelay = 40 - store_missdelay = 120 -end - -section pic - enabled = 1 - edge_trigger = 1 -end - -section sim - verbose = 1 - debug = 0 - profile = 0 - history = 0 - clkcycle = 10ns /* 100MHz clock */ -end - -section VAPI - enabled = 1 - server_port = 50000 - log_enabled = 1 - vapi_log_file = "vapi.log" -end - -section cpu - ver = 0x12 - cfg = 0x00 - rev = 0x0001 - upr = 0x0000075f - superscalar = 0 - hazards = 0 - dependstats = 0 - sbuf_len = 100 -end - -section debug - enabled = 1 - rsp_enabled = 1 - rsp_port = 50001 -end - -section uart - enabled = 1 - baseaddr = 0x90000000 - #channel = "xterm" - channel = "file:uart0.rx,uart0.tx" - irq = 2 - 16550 = 1 -end - -section pm - enabled = 1 -end diff --git a/bsps/powerpc/beatnik/config/beatnik.cfg b/bsps/powerpc/beatnik/config/beatnik.cfg deleted file mode 100644 index 7df626afe9..0000000000 --- a/bsps/powerpc/beatnik/config/beatnik.cfg +++ /dev/null @@ -1,35 +0,0 @@ -# -# Config file for the PowerPC 745x based mvmexxxx -# -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc -RTEMS_PPC_EXCEPTION_PROCESSING_MODEL=new - -# This is the actual bsp directory used during the build process. -RTEMS_BSP_FAMILY=beatnik - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -CPU_CFLAGS = -mcpu=7400 -#T. Straumann; disable sdata=eabi for now until CEXP supports it -meabi -msdata=eabi - -# optimize flag: typically -0, could use -O4 or -fast -# -O4 is ok for RTEMS -# NOTE: some level of -O may be actually required by inline assembler -#CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary $@ $(basename $@)$(DOWNEXT) -endef - -# Miscellaneous additions go here -START_BASE = motld_start diff --git a/bsps/powerpc/gen5200/config/icecube.cfg b/bsps/powerpc/gen5200/config/icecube.cfg deleted file mode 100644 index c53040e1b3..0000000000 --- a/bsps/powerpc/gen5200/config/icecube.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Config file for Freescale 5200Lite a.k.a. IceCube -# -# NOTE: This is the same as the Embedded Planets EP5200C and -# possibly other MPC5200 boards. - -# -# All GEN5200 configurations share the same base file, only a few -# parameters differ. -# - -include $(RTEMS_ROOT)/make/custom/gen5200.inc diff --git a/bsps/powerpc/gen5200/config/pm520_cr825.cfg b/bsps/powerpc/gen5200/config/pm520_cr825.cfg deleted file mode 100644 index d86814ab66..0000000000 --- a/bsps/powerpc/gen5200/config/pm520_cr825.cfg +++ /dev/null @@ -1,10 +0,0 @@ -# -# Config file for MicroSys PM520 Module (based on MPC5200) -# on carrier board CR825 - -# -# All GEN5200 configurations share the same base file, only a few -# parameters differ. -# - -include $(RTEMS_ROOT)/make/custom/gen5200.inc diff --git a/bsps/powerpc/gen5200/config/pm520_ze30.cfg b/bsps/powerpc/gen5200/config/pm520_ze30.cfg deleted file mode 100644 index e16e2e1886..0000000000 --- a/bsps/powerpc/gen5200/config/pm520_ze30.cfg +++ /dev/null @@ -1,10 +0,0 @@ -# -# Config file for MicroSys PM520 Module (based on MPC5200) -# on carrier board ZE30 - -# -# All GEN5200 configurations share the same base file, only a few -# parameters differ. -# - -include $(RTEMS_ROOT)/make/custom/gen5200.inc diff --git a/bsps/powerpc/gen83xx/config/br_uid.cfg b/bsps/powerpc/gen83xx/config/br_uid.cfg deleted file mode 100644 index 0db23d54dd..0000000000 --- a/bsps/powerpc/gen83xx/config/br_uid.cfg +++ /dev/null @@ -1,10 +0,0 @@ -## -# -# @file -# -# @ingroup mpc83xx_config -# -# @brief Configuration file for the BR UID base board -# - -include $(RTEMS_ROOT)/make/custom/gen83xx.inc diff --git a/bsps/powerpc/gen83xx/config/hsc_cm01.cfg b/bsps/powerpc/gen83xx/config/hsc_cm01.cfg deleted file mode 100644 index 8f2ac1829d..0000000000 --- a/bsps/powerpc/gen83xx/config/hsc_cm01.cfg +++ /dev/null @@ -1,10 +0,0 @@ -# -# Config file for customer specific MPC8349 board -# - -# -# All GEN83xx configurations share the same base file, only a few -# parameters differ. -# - -include $(RTEMS_ROOT)/make/custom/gen83xx.inc diff --git a/bsps/powerpc/gen83xx/config/mpc8309som.cfg b/bsps/powerpc/gen83xx/config/mpc8309som.cfg deleted file mode 100644 index be25fcd4fb..0000000000 --- a/bsps/powerpc/gen83xx/config/mpc8309som.cfg +++ /dev/null @@ -1,10 +0,0 @@ -## -# -# @file -# -# @ingroup mpc83xx_config -# -# @brief Configuration file for the MPC8309 System on Module. -# - -include $(RTEMS_ROOT)/make/custom/gen83xx.inc diff --git a/bsps/powerpc/gen83xx/config/mpc8313erdb.cfg b/bsps/powerpc/gen83xx/config/mpc8313erdb.cfg deleted file mode 100644 index 4a6331e8c4..0000000000 --- a/bsps/powerpc/gen83xx/config/mpc8313erdb.cfg +++ /dev/null @@ -1,10 +0,0 @@ -## -# -# @file -# -# @ingroup mpc83xx_config -# -# @brief Configuration file for the MPC8313E Reference Design Board. -# - -include $(RTEMS_ROOT)/make/custom/gen83xx.inc diff --git a/bsps/powerpc/gen83xx/config/mpc8349eamds.cfg b/bsps/powerpc/gen83xx/config/mpc8349eamds.cfg deleted file mode 100644 index b58c60a92a..0000000000 --- a/bsps/powerpc/gen83xx/config/mpc8349eamds.cfg +++ /dev/null @@ -1,10 +0,0 @@ -# -# Config file for freescale's MPC8349EAMDS evaluation board -# - -# -# All GEN83xx configurations share the same base file, only a few -# parameters differ. -# - -include $(RTEMS_ROOT)/make/custom/gen83xx.inc diff --git a/bsps/powerpc/motorola_powerpc/config/mcp750.cfg b/bsps/powerpc/motorola_powerpc/config/mcp750.cfg deleted file mode 100644 index 24abc47bdb..0000000000 --- a/bsps/powerpc/motorola_powerpc/config/mcp750.cfg +++ /dev/null @@ -1,31 +0,0 @@ -# -# Config file for Motorola MCP750 -- a MPC750 CompactPCI board -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -CPU_CFLAGS = -mcpu=750 - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -mmultiple -mstring -mstrict-align -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary -R .comment -S $(basename $@)$(EXEEXT) rtems - gzip -vf9 rtems - $(LD) -o $(basename $@)$(DOWNEXT) \ - $ $(PROJECT_RELEASE)/lib/bootloader.o \ - --just-symbols=$(basename $@)$(EXEEXT) \ - --no-warn-mismatch \ - -b binary rtems.gz -T $(PROJECT_RELEASE)/lib/ppcboot.lds \ - -Map $(basename $@).map && chmod 755 $@ - rm -f rtems.gz -endef diff --git a/bsps/powerpc/motorola_powerpc/config/mtx603e.cfg b/bsps/powerpc/motorola_powerpc/config/mtx603e.cfg deleted file mode 100644 index cc0d4f4b58..0000000000 --- a/bsps/powerpc/motorola_powerpc/config/mtx603e.cfg +++ /dev/null @@ -1,32 +0,0 @@ -# -# Config file for Motorola MTX603e -- a MPC603e ATX form factor board -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=603e - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -mmultiple -mstring -mstrict-align -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary -R .comment -S $(basename $@)$(EXEEXT) rtems - gzip -vf9 rtems - $(LD) -o $(basename $@)$(DOWNEXT) \ - $(PROJECT_RELEASE)/lib/bootloader.o \ - --just-symbols=$(basename $@)$(EXEEXT) \ - --no-warn-mismatch \ - -b binary rtems.gz -T $(PROJECT_RELEASE)/lib/ppcboot.lds \ - -Map $(basename $@).map && chmod 755 $@ - rm -f rtems.gz -endef - -# Miscellaneous additions go here diff --git a/bsps/powerpc/motorola_powerpc/config/mvme2100.cfg b/bsps/powerpc/motorola_powerpc/config/mvme2100.cfg deleted file mode 100644 index 2361df15e1..0000000000 --- a/bsps/powerpc/motorola_powerpc/config/mvme2100.cfg +++ /dev/null @@ -1,30 +0,0 @@ -# -# Config file for Motorola MVME2100 -- a MPC8240 VMEBus board -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=603e - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -mmultiple -mstring -mstrict-align -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary -R .comment -S $(basename $@)$(EXEEXT) rtems - gzip -vf9 rtems - $(LD) -o $(basename $@)$(DOWNEXT) \ - $(PROJECT_RELEASE)/lib/bootloader.o \ - --just-symbols=$(basename $@)$(EXEEXT) \ - --no-warn-mismatch \ - -b binary rtems.gz -T $(PROJECT_RELEASE)/lib/ppcboot.lds \ - -Map $(basename $@).map && chmod 755 $@ - rm -f rtems.gz -endef diff --git a/bsps/powerpc/motorola_powerpc/config/mvme2307.cfg b/bsps/powerpc/motorola_powerpc/config/mvme2307.cfg deleted file mode 100644 index 1a5115999b..0000000000 --- a/bsps/powerpc/motorola_powerpc/config/mvme2307.cfg +++ /dev/null @@ -1,30 +0,0 @@ -# -# Config file for the PowerPC 604 based mvme2307 -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -CPU_CFLAGS = -mcpu=604 -mmultiple -mstring -mstrict-align -meabi - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary -R .comment -S $(basename $@)$(EXEEXT) rtems - gzip -vf9 rtems - $(LD) -o $(basename $@)$(DOWNEXT) $(PROJECT_RELEASE)/lib/bootloader.o \ - --just-symbols=$(basename $@)$(EXEEXT) \ - --no-warn-mismatch \ - -b binary rtems.gz -T $(PROJECT_RELEASE)/lib/ppcboot.lds \ - -Map $(basename $@).map && chmod 755 $@ - rm -f rtems.gz -endef diff --git a/bsps/powerpc/motorola_powerpc/config/qemuprep-altivec.cfg b/bsps/powerpc/motorola_powerpc/config/qemuprep-altivec.cfg deleted file mode 100644 index ed9cfa5ddc..0000000000 --- a/bsps/powerpc/motorola_powerpc/config/qemuprep-altivec.cfg +++ /dev/null @@ -1,37 +0,0 @@ -# -# Config file for the QemuPrep w/Altivec -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -CPU_CFLAGS = -mcpu=7400 -mmultiple -mstring -mstrict-align - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -ifdef PURE_BINARY -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary -R .comment -S $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT) -endef -else -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary -R .comment -S $(basename $@)$(EXEEXT) rtems - gzip -vf9 rtems - $(LD) -o $(basename $@)$(DOWNEXT) $(PROJECT_RELEASE)/lib/bootloader.o \ - --just-symbols=$(basename $@)$(EXEEXT) \ - --no-warn-mismatch \ - -b binary rtems.gz -T $(PROJECT_RELEASE)/lib/ppcboot.lds \ - -Map $(basename $@).map && chmod 755 $@ - rm -f rtems.gz -endef -endif diff --git a/bsps/powerpc/motorola_powerpc/config/qemuprep.cfg b/bsps/powerpc/motorola_powerpc/config/qemuprep.cfg deleted file mode 100644 index 4ff7bd07b9..0000000000 --- a/bsps/powerpc/motorola_powerpc/config/qemuprep.cfg +++ /dev/null @@ -1,37 +0,0 @@ -# -# Config file for the QemuPrep w/o Altivec -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -CPU_CFLAGS = -mcpu=powerpc -mmultiple -mstring -mstrict-align - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -ifdef PURE_BINARY -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary -R .comment -S $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT) -endef -else -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary -R .comment -S $(basename $@)$(EXEEXT) rtems - gzip -vf9 rtems - $(LD) -o $(basename $@)$(DOWNEXT) $(PROJECT_RELEASE)/lib/bootloader.o \ - --just-symbols=$(basename $@)$(EXEEXT) \ - --no-warn-mismatch \ - -b binary rtems.gz -T $(PROJECT_RELEASE)/lib/ppcboot.lds \ - -Map $(basename $@).map && chmod 755 $@ - rm -f rtems.gz -endef -endif diff --git a/bsps/powerpc/mpc55xxevb/config/gwlcfm.cfg b/bsps/powerpc/mpc55xxevb/config/gwlcfm.cfg deleted file mode 100644 index f9a40532cb..0000000000 --- a/bsps/powerpc/mpc55xxevb/config/gwlcfm.cfg +++ /dev/null @@ -1,10 +0,0 @@ -## -# -# @file -# -# @ingroup mpc55xx_config -# -# @brief configuration file for the GWLCFM MPC5516 board -# - -include $(RTEMS_ROOT)/make/custom/mpc55xx.inc diff --git a/bsps/powerpc/mpc55xxevb/config/mpc5566evb.cfg b/bsps/powerpc/mpc55xxevb/config/mpc5566evb.cfg deleted file mode 100644 index 0e19d66284..0000000000 --- a/bsps/powerpc/mpc55xxevb/config/mpc5566evb.cfg +++ /dev/null @@ -1,10 +0,0 @@ -## -# -# @file -# -# @ingroup mpc55xx_config -# -# @brief Configuration file for MPC5566 evaluation board. -# - -include $(RTEMS_ROOT)/make/custom/mpc55xx.inc diff --git a/bsps/powerpc/mpc55xxevb/config/mpc5643l_evb.cfg b/bsps/powerpc/mpc55xxevb/config/mpc5643l_evb.cfg deleted file mode 100644 index eb9c0db185..0000000000 --- a/bsps/powerpc/mpc55xxevb/config/mpc5643l_evb.cfg +++ /dev/null @@ -1,10 +0,0 @@ -## -# -# @file -# -# @ingroup mpc55xx_config -# -# @brief Configuration file for XKT564LEVB evaluation board. -# - -include $(RTEMS_ROOT)/make/custom/mpc55xx.inc diff --git a/bsps/powerpc/mpc55xxevb/config/mpc5668g.cfg b/bsps/powerpc/mpc55xxevb/config/mpc5668g.cfg deleted file mode 100644 index b0cb600143..0000000000 --- a/bsps/powerpc/mpc55xxevb/config/mpc5668g.cfg +++ /dev/null @@ -1 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/mpc55xx.inc diff --git a/bsps/powerpc/mpc55xxevb/config/mpc5674fevb.cfg b/bsps/powerpc/mpc55xxevb/config/mpc5674fevb.cfg deleted file mode 100644 index eb1a3f5c3d..0000000000 --- a/bsps/powerpc/mpc55xxevb/config/mpc5674fevb.cfg +++ /dev/null @@ -1,11 +0,0 @@ -## -# -# @file -# -# @ingroup mpc55xx_config -# -# @brief Configuration file for MPC567XEVBFXMB evaluation board equipped with -# an MPC5674F core from Freescale and Axiom. -# - -include $(RTEMS_ROOT)/make/custom/mpc55xx.inc diff --git a/bsps/powerpc/mpc55xxevb/config/phycore_mpc5554.cfg b/bsps/powerpc/mpc55xxevb/config/phycore_mpc5554.cfg deleted file mode 100644 index b0cb600143..0000000000 --- a/bsps/powerpc/mpc55xxevb/config/phycore_mpc5554.cfg +++ /dev/null @@ -1 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/mpc55xx.inc diff --git a/bsps/powerpc/mpc8260ads/config/mpc8260ads.cfg b/bsps/powerpc/mpc8260ads/config/mpc8260ads.cfg deleted file mode 100644 index 7b5a9dc921..0000000000 --- a/bsps/powerpc/mpc8260ads/config/mpc8260ads.cfg +++ /dev/null @@ -1,21 +0,0 @@ -# -# Config file for MPC8260 based Motorola ADS board -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc -8XX_CPU_TYPE=8260 - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -# CPU_CFLAGS = -mcpu=$(8XX_CPU_TYPE) -mstrict-align -CPU_CFLAGS = -mcpu=603e -mstrict-align -meabi -msdata=sysv -fno-common - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -fno-keep-inline-functions - -# The following two lines enable compiling and linking on per element. -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/powerpc/mvme3100/config/mvme3100.cfg b/bsps/powerpc/mvme3100/config/mvme3100.cfg deleted file mode 100644 index 50a291aae8..0000000000 --- a/bsps/powerpc/mvme3100/config/mvme3100.cfg +++ /dev/null @@ -1,23 +0,0 @@ -# -# Config file for the PowerPC 8540 based mvme3100 -# -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=powerpc -msoft-float - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT) -endef diff --git a/bsps/powerpc/mvme5500/config/mvme5500.cfg b/bsps/powerpc/mvme5500/config/mvme5500.cfg deleted file mode 100644 index 0bfb6ff52c..0000000000 --- a/bsps/powerpc/mvme5500/config/mvme5500.cfg +++ /dev/null @@ -1,28 +0,0 @@ -# -# Config file for the PowerPC 7455 based mvme5500 -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This is the actual bsp directory used during the build process. -RTEMS_BSP_FAMILY=mvme5500 - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=7450 -mtune=7450 - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT) -endef - -# -START_BASE=mvme5500start diff --git a/bsps/powerpc/psim/config/psim.cfg b/bsps/powerpc/psim/config/psim.cfg deleted file mode 100644 index 1cfd201eff..0000000000 --- a/bsps/powerpc/psim/config/psim.cfg +++ /dev/null @@ -1,18 +0,0 @@ -# -# Config file for the PowerPC 60x simulator - psim -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -meabi -mcpu=603e -msdata=sysv -fno-common - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -fno-keep-inline-functions - -# arguments to compile and link with per-element sections -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/powerpc/qemuppc/config/qemuppc.cfg b/bsps/powerpc/qemuppc/config/qemuppc.cfg deleted file mode 100644 index 1fd28c8ecb..0000000000 --- a/bsps/powerpc/qemuppc/config/qemuppc.cfg +++ /dev/null @@ -1,23 +0,0 @@ -# -# Config file for the PowerPC 60x simulator in Qemu -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=603e - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -fno-keep-inline-functions - -# The following two lines enable compiling and linking on per element. -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections - -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O binary $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT) -endef diff --git a/bsps/powerpc/qoriq/config/qoriq_core_0.cfg b/bsps/powerpc/qoriq/config/qoriq_core_0.cfg deleted file mode 100644 index 8ce12d84a3..0000000000 --- a/bsps/powerpc/qoriq/config/qoriq_core_0.cfg +++ /dev/null @@ -1,3 +0,0 @@ -# Config file for QorIQ Core 0 - -include $(RTEMS_ROOT)/make/custom/qoriq.inc diff --git a/bsps/powerpc/qoriq/config/qoriq_core_1.cfg b/bsps/powerpc/qoriq/config/qoriq_core_1.cfg deleted file mode 100644 index ee7eadd947..0000000000 --- a/bsps/powerpc/qoriq/config/qoriq_core_1.cfg +++ /dev/null @@ -1,3 +0,0 @@ -# Config file for QorIQ Core 1 - -include $(RTEMS_ROOT)/make/custom/qoriq.inc diff --git a/bsps/powerpc/qoriq/config/qoriq_e500.cfg b/bsps/powerpc/qoriq/config/qoriq_e500.cfg deleted file mode 100644 index 91e957d967..0000000000 --- a/bsps/powerpc/qoriq/config/qoriq_e500.cfg +++ /dev/null @@ -1,3 +0,0 @@ -# Config file for e500 or e500v2 core based QorIQ chips, e.g. P1020, P2040 - -include $(RTEMS_ROOT)/make/custom/qoriq.inc diff --git a/bsps/powerpc/qoriq/config/qoriq_e6500_32.cfg b/bsps/powerpc/qoriq/config/qoriq_e6500_32.cfg deleted file mode 100644 index 0c2423677f..0000000000 --- a/bsps/powerpc/qoriq/config/qoriq_e6500_32.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# Config file for e6500 core based QorIQ chips, e.g. T2080, T4240 - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = powerpc - -CPU_CFLAGS = -mcpu=e6500 -m32 -msdata=sysv -fno-common - -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/powerpc/qoriq/config/qoriq_e6500_64.cfg b/bsps/powerpc/qoriq/config/qoriq_e6500_64.cfg deleted file mode 100644 index ebc26e43ae..0000000000 --- a/bsps/powerpc/qoriq/config/qoriq_e6500_64.cfg +++ /dev/null @@ -1,13 +0,0 @@ -# Config file for e6500 core based QorIQ chips in 64-bit mode, e.g. T2080, -# T4240 - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = powerpc - -CPU_CFLAGS = -mcpu=e6500 -m64 -fno-common - -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/powerpc/ss555/config/ss555.cfg b/bsps/powerpc/ss555/config/ss555.cfg deleted file mode 100644 index f4c6ca22a7..0000000000 --- a/bsps/powerpc/ss555/config/ss555.cfg +++ /dev/null @@ -1,30 +0,0 @@ -# -# Config file for an Intec Automation SS555 MPC555-based card -# -# This file is derived from: -# -# Config file for a PowerPC MPC860-based MBX821-001 card. -# Config file for a PowerPC 403 based helas403 card -# Config file for MPC860 based Ethernet Comm Board - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -CPU_CFLAGS = -mcpu=505 - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -fno-keep-inline-functions - -# The following two lines enable compiling and linking on per element. -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections -LDFLAGS = -Wl,--gc-sections - -define bsp-post-link - $(default-bsp-post-link) - cp $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT) - $(STRIP) $(basename $@)$(DOWNEXT) -endef diff --git a/bsps/powerpc/t32mppc/config/t32mppc.cfg b/bsps/powerpc/t32mppc/config/t32mppc.cfg deleted file mode 100644 index 2e3125268e..0000000000 --- a/bsps/powerpc/t32mppc/config/t32mppc.cfg +++ /dev/null @@ -1,10 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = powerpc - -CPU_CFLAGS = -mcpu=8540 -msoft-float -meabi -msdata=sysv -fno-common - -CFLAGS_OPTIMIZE_V = -Og -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/powerpc/tqm8xx/config/pghplus.cfg b/bsps/powerpc/tqm8xx/config/pghplus.cfg deleted file mode 100644 index 75eb65fe90..0000000000 --- a/bsps/powerpc/tqm8xx/config/pghplus.cfg +++ /dev/null @@ -1,10 +0,0 @@ -# -# Config file for a PowerPC MPC860-based TQM8xx carrier board. -# - -# -# All TQM8xx configurations share the same base file, only a few -# parameters differ. -# - -include $(RTEMS_ROOT)/make/custom/tqm8xx.inc diff --git a/bsps/powerpc/tqm8xx/config/tqm8xx_stk8xx.cfg b/bsps/powerpc/tqm8xx/config/tqm8xx_stk8xx.cfg deleted file mode 100644 index 7b5ab01b8a..0000000000 --- a/bsps/powerpc/tqm8xx/config/tqm8xx_stk8xx.cfg +++ /dev/null @@ -1,10 +0,0 @@ -# -# Config file for a PowerPC MPC860-based TQM8xx starter kit base board -# - -# -# All TQM8xx configurations share the same base file, only a few -# parameters differ. -# - -include $(RTEMS_ROOT)/make/custom/tqm8xx.inc diff --git a/bsps/powerpc/virtex/config/virtex.cfg b/bsps/powerpc/virtex/config/virtex.cfg deleted file mode 100644 index c108b01bac..0000000000 --- a/bsps/powerpc/virtex/config/virtex.cfg +++ /dev/null @@ -1,25 +0,0 @@ -# -# Config file for a generic PowerPC 405 based card -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -CPU_CFLAGS = -mcpu=403 -meabi -msdata=sysv -fno-common - -# optimize flag: typically -0, could use -O4 or -fast -# -O4 is ok for RTEMS -# NOTE: some level of -O may be actually required by inline assembler -CFLAGS_OPTIMIZE_V = -O2 -g -fno-keep-inline-functions -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O srec $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT) -endef diff --git a/bsps/powerpc/virtex4/config/virtex4.cfg b/bsps/powerpc/virtex4/config/virtex4.cfg deleted file mode 100644 index 88e50a6f2f..0000000000 --- a/bsps/powerpc/virtex4/config/virtex4.cfg +++ /dev/null @@ -1,21 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -CPU_CFLAGS = -mcpu=405 - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -fno-keep-inline-functions -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -# Miscellaneous additions go here -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O srec $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT) -endef - diff --git a/bsps/powerpc/virtex5/config/virtex5.cfg b/bsps/powerpc/virtex5/config/virtex5.cfg deleted file mode 100644 index cb260db061..0000000000 --- a/bsps/powerpc/virtex5/config/virtex5.cfg +++ /dev/null @@ -1,21 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -CPU_CFLAGS = -mcpu=440 -msoft-float - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -fno-keep-inline-functions -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections - -# Miscellaneous additions go here -define bsp-post-link - $(default-bsp-post-link) - $(OBJCOPY) -O srec $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT) -endef - diff --git a/bsps/riscv/griscv/config/griscv.cfg b/bsps/riscv/griscv/config/griscv.cfg deleted file mode 100644 index 471f5ee2a6..0000000000 --- a/bsps/riscv/griscv/config/griscv.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32imafd -mabi=ilp32d - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/griscv/config/grv32i.cfg b/bsps/riscv/griscv/config/grv32i.cfg deleted file mode 100644 index a394590dc2..0000000000 --- a/bsps/riscv/griscv/config/grv32i.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32i -mabi=ilp32 - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/griscv/config/grv32im.cfg b/bsps/riscv/griscv/config/grv32im.cfg deleted file mode 100644 index 46dfdad09c..0000000000 --- a/bsps/riscv/griscv/config/grv32im.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32im -mabi=ilp32 - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/griscv/config/grv32imac.cfg b/bsps/riscv/griscv/config/grv32imac.cfg deleted file mode 100644 index e19e431b53..0000000000 --- a/bsps/riscv/griscv/config/grv32imac.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32imac -mabi=ilp32 - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/griscv/config/grv32imafdc.cfg b/bsps/riscv/griscv/config/grv32imafdc.cfg deleted file mode 100644 index 623f76fa47..0000000000 --- a/bsps/riscv/griscv/config/grv32imafdc.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32imafdc -mabi=ilp32d - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/beaglevfire.cfg b/bsps/riscv/riscv/config/beaglevfire.cfg deleted file mode 100644 index b04e78b0e9..0000000000 --- a/bsps/riscv/riscv/config/beaglevfire.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv64imafdc -mabi=lp64d -mcmodel=medany - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/frdme310arty.cfg b/bsps/riscv/riscv/config/frdme310arty.cfg deleted file mode 100644 index e19e431b53..0000000000 --- a/bsps/riscv/riscv/config/frdme310arty.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32imac -mabi=ilp32 - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/kendrytek210.cfg b/bsps/riscv/riscv/config/kendrytek210.cfg deleted file mode 100644 index b04e78b0e9..0000000000 --- a/bsps/riscv/riscv/config/kendrytek210.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv64imafdc -mabi=lp64d -mcmodel=medany - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/mpfs64imafdc.cfg b/bsps/riscv/riscv/config/mpfs64imafdc.cfg deleted file mode 100644 index b04e78b0e9..0000000000 --- a/bsps/riscv/riscv/config/mpfs64imafdc.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv64imafdc -mabi=lp64d -mcmodel=medany - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32i.cfg b/bsps/riscv/riscv/config/rv32i.cfg deleted file mode 100644 index a394590dc2..0000000000 --- a/bsps/riscv/riscv/config/rv32i.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32i -mabi=ilp32 - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32i_clang.cfg b/bsps/riscv/riscv/config/rv32i_clang.cfg deleted file mode 100644 index a7bcedcde5..0000000000 --- a/bsps/riscv/riscv/config/rv32i_clang.cfg +++ /dev/null @@ -1,14 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32i -mabi=ilp32 - -# Clang-related flags -CPU_CFLAGS += -target riscv32-unknown-rtems6 --sysroot=$(NEWLIB_SYSROOT) - -LDFLAGS = -Wl,--gc-sections -L$(RTEMS_BSP_LIBBSP_PATH) -L$(PROJECT_LIB) -L$(RTEMS_BSP_ARCH_LINKCMDS_PATH) - -# Clang-related flags - -CFLAGS_OPTIMIZE_V ?= -O0 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32iac.cfg b/bsps/riscv/riscv/config/rv32iac.cfg deleted file mode 100644 index 369f2c441d..0000000000 --- a/bsps/riscv/riscv/config/rv32iac.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32iac -mabi=ilp32 - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32iac_clang.cfg b/bsps/riscv/riscv/config/rv32iac_clang.cfg deleted file mode 100644 index 071fbfd17a..0000000000 --- a/bsps/riscv/riscv/config/rv32iac_clang.cfg +++ /dev/null @@ -1,14 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32iac -mabi=ilp32 - -# Clang-related flags -CPU_CFLAGS += -target riscv32-unknown-rtems6 --sysroot=$(NEWLIB_SYSROOT) - -LDFLAGS = -Wl,--gc-sections -L$(RTEMS_BSP_LIBBSP_PATH) -L$(PROJECT_LIB) -L$(RTEMS_BSP_ARCH_LINKCMDS_PATH) - -# Clang-related flags - -CFLAGS_OPTIMIZE_V ?= -O0 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32im.cfg b/bsps/riscv/riscv/config/rv32im.cfg deleted file mode 100644 index 46dfdad09c..0000000000 --- a/bsps/riscv/riscv/config/rv32im.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32im -mabi=ilp32 - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32im_clang.cfg b/bsps/riscv/riscv/config/rv32im_clang.cfg deleted file mode 100644 index 9a2795a2e5..0000000000 --- a/bsps/riscv/riscv/config/rv32im_clang.cfg +++ /dev/null @@ -1,14 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32im -mabi=ilp32 - -# Clang-related flags -CPU_CFLAGS += -target riscv32-unknown-rtems6 --sysroot=$(NEWLIB_SYSROOT) - -LDFLAGS = -Wl,--gc-sections -L$(RTEMS_BSP_LIBBSP_PATH) -L$(PROJECT_LIB) -L$(RTEMS_BSP_ARCH_LINKCMDS_PATH) - -# Clang-related flags - -CFLAGS_OPTIMIZE_V ?= -O0 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32imac.cfg b/bsps/riscv/riscv/config/rv32imac.cfg deleted file mode 100644 index e19e431b53..0000000000 --- a/bsps/riscv/riscv/config/rv32imac.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32imac -mabi=ilp32 - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32imac_clang.cfg b/bsps/riscv/riscv/config/rv32imac_clang.cfg deleted file mode 100644 index 034a200c9b..0000000000 --- a/bsps/riscv/riscv/config/rv32imac_clang.cfg +++ /dev/null @@ -1,14 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32imac -mabi=ilp32 - -# Clang-related flags -CPU_CFLAGS += -target riscv32-unknown-rtems6 --sysroot=$(NEWLIB_SYSROOT) - -LDFLAGS = -Wl,--gc-sections -L$(RTEMS_BSP_LIBBSP_PATH) -L$(PROJECT_LIB) -L$(RTEMS_BSP_ARCH_LINKCMDS_PATH) - -# Clang-related flags - -CFLAGS_OPTIMIZE_V ?= -O0 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32imafc.cfg b/bsps/riscv/riscv/config/rv32imafc.cfg deleted file mode 100644 index bd4a0cacbe..0000000000 --- a/bsps/riscv/riscv/config/rv32imafc.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32imafc -mabi=ilp32f - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32imafc_clang.cfg b/bsps/riscv/riscv/config/rv32imafc_clang.cfg deleted file mode 100644 index 3d344ba3db..0000000000 --- a/bsps/riscv/riscv/config/rv32imafc_clang.cfg +++ /dev/null @@ -1,14 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32imafc -mabi=ilp32d - -# Clang-related flags -CPU_CFLAGS += -target riscv32-unknown-rtems6 --sysroot=$(NEWLIB_SYSROOT) - -LDFLAGS = -Wl,--gc-sections -L$(RTEMS_BSP_LIBBSP_PATH) -L$(PROJECT_LIB) -L$(RTEMS_BSP_ARCH_LINKCMDS_PATH) - -# Clang-related flags - -CFLAGS_OPTIMIZE_V ?= -O0 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32imafd.cfg b/bsps/riscv/riscv/config/rv32imafd.cfg deleted file mode 100644 index 471f5ee2a6..0000000000 --- a/bsps/riscv/riscv/config/rv32imafd.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32imafd -mabi=ilp32d - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32imafd_clang.cfg b/bsps/riscv/riscv/config/rv32imafd_clang.cfg deleted file mode 100644 index 887a400117..0000000000 --- a/bsps/riscv/riscv/config/rv32imafd_clang.cfg +++ /dev/null @@ -1,14 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32imafd -mabi=ilp32d - -# Clang-related flags -CPU_CFLAGS += -target riscv32-unknown-rtems6 --sysroot=$(NEWLIB_SYSROOT) - -LDFLAGS = -Wl,--gc-sections -L$(RTEMS_BSP_LIBBSP_PATH) -L$(PROJECT_LIB) -L$(RTEMS_BSP_ARCH_LINKCMDS_PATH) - -# Clang-related flags - -CFLAGS_OPTIMIZE_V ?= -O0 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32imafdc.cfg b/bsps/riscv/riscv/config/rv32imafdc.cfg deleted file mode 100644 index 6ea56e8837..0000000000 --- a/bsps/riscv/riscv/config/rv32imafdc.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv32imafdc_clang.cfg b/bsps/riscv/riscv/config/rv32imafdc_clang.cfg deleted file mode 100644 index 2d0aa22209..0000000000 --- a/bsps/riscv/riscv/config/rv32imafdc_clang.cfg +++ /dev/null @@ -1,14 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv32imafdc -mabi=ilp32d - -# Clang-related flags -CPU_CFLAGS += -target riscv32-unknown-rtems6 --sysroot=$(NEWLIB_SYSROOT) - -LDFLAGS = -Wl,--gc-sections -L$(RTEMS_BSP_LIBBSP_PATH) -L$(PROJECT_LIB) -L$(RTEMS_BSP_ARCH_LINKCMDS_PATH) - -# Clang-related flags - -CFLAGS_OPTIMIZE_V ?= -O0 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv64imac.cfg b/bsps/riscv/riscv/config/rv64imac.cfg deleted file mode 100644 index e5df5995ac..0000000000 --- a/bsps/riscv/riscv/config/rv64imac.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv64imac -mabi=lp64 - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv64imac_medany.cfg b/bsps/riscv/riscv/config/rv64imac_medany.cfg deleted file mode 100644 index f7ab9ff7b4..0000000000 --- a/bsps/riscv/riscv/config/rv64imac_medany.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv64imac -mabi=lp64 -mcmodel=medany - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv64imafd.cfg b/bsps/riscv/riscv/config/rv64imafd.cfg deleted file mode 100644 index 29324a1edd..0000000000 --- a/bsps/riscv/riscv/config/rv64imafd.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv64imafd -mabi=lp64d - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv64imafd_medany.cfg b/bsps/riscv/riscv/config/rv64imafd_medany.cfg deleted file mode 100644 index c43cd4fd32..0000000000 --- a/bsps/riscv/riscv/config/rv64imafd_medany.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv64imafd -mabi=lp64d -mcmodel=medany - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv64imafdc.cfg b/bsps/riscv/riscv/config/rv64imafdc.cfg deleted file mode 100644 index 09caf7adbf..0000000000 --- a/bsps/riscv/riscv/config/rv64imafdc.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv64imafdc -mabi=lp64d - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv64imafdc_clang.cfg b/bsps/riscv/riscv/config/rv64imafdc_clang.cfg deleted file mode 100644 index ec668bcb18..0000000000 --- a/bsps/riscv/riscv/config/rv64imafdc_clang.cfg +++ /dev/null @@ -1,14 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv64imafdc -mabi=lp64d - -# Clang-related flags -CPU_CFLAGS += -target riscv64-unknown-rtems6 --sysroot=$(NEWLIB_SYSROOT) - -LDFLAGS = -Wl,--gc-sections -L$(RTEMS_BSP_LIBBSP_PATH) -L$(PROJECT_LIB) -L$(RTEMS_BSP_ARCH_LINKCMDS_PATH) - -# Clang-related flags - -CFLAGS_OPTIMIZE_V ?= -O0 -g -ffunction-sections -fdata-sections diff --git a/bsps/riscv/riscv/config/rv64imafdc_medany.cfg b/bsps/riscv/riscv/config/rv64imafdc_medany.cfg deleted file mode 100644 index b04e78b0e9..0000000000 --- a/bsps/riscv/riscv/config/rv64imafdc_medany.cfg +++ /dev/null @@ -1,9 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = riscv - -CPU_CFLAGS = -march=rv64imafdc -mabi=lp64d -mcmodel=medany - -LDFLAGS = -Wl,--gc-sections - -CFLAGS_OPTIMIZE_V ?= -O2 -g -ffunction-sections -fdata-sections diff --git a/bsps/sparc/erc32/config/erc32.cfg b/bsps/sparc/erc32/config/erc32.cfg deleted file mode 100644 index 84cc752daf..0000000000 --- a/bsps/sparc/erc32/config/erc32.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# -# Config file for the European Space Agency ERC32 -# a V7 SPARC processor derived from the Cypress 601/602 set. - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=sparc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=cypress - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/sparc/leon2/config/at697f.cfg b/bsps/sparc/leon2/config/at697f.cfg deleted file mode 100644 index 94ab6efbe9..0000000000 --- a/bsps/sparc/leon2/config/at697f.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# -# Config file for the AT697F LEON2 SPARC processor. -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=sparc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=leon -mfix-at697f - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/sparc/leon2/config/leon2.cfg b/bsps/sparc/leon2/config/leon2.cfg deleted file mode 100644 index a5e76e7aa9..0000000000 --- a/bsps/sparc/leon2/config/leon2.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# -# Config file for the LEON2 SPARC processor. -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=sparc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=leon - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/sparc/leon3/config/gr712rc.cfg b/bsps/sparc/leon3/config/gr712rc.cfg deleted file mode 100644 index 385293275c..0000000000 --- a/bsps/sparc/leon3/config/gr712rc.cfg +++ /dev/null @@ -1,22 +0,0 @@ -# -# Config file for the GR712RC LEON3 SPARC processor. -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=sparc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# GCC and clang use different switches to select target: -ifneq (,$(findstring clang,$(CC))) - CPU_CFLAGS = -mcpu=gr712rc -else - CPU_CFLAGS = -mcpu=leon3 -mfix-gr712rc -endif - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/sparc/leon3/config/gr740.cfg b/bsps/sparc/leon3/config/gr740.cfg deleted file mode 100644 index 640a4fdd72..0000000000 --- a/bsps/sparc/leon3/config/gr740.cfg +++ /dev/null @@ -1,22 +0,0 @@ -# -# Config file for the LEON3 SPARC processor. -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=sparc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# GCC and clang use different switches to select target: -ifneq (,$(findstring clang,$(CC))) - CPU_CFLAGS = -mcpu=gr740 -else - CPU_CFLAGS = -mcpu=leon3 -endif - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/sparc/leon3/config/leon3.cfg b/bsps/sparc/leon3/config/leon3.cfg deleted file mode 100644 index d931d6c5f1..0000000000 --- a/bsps/sparc/leon3/config/leon3.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# -# Config file for the LEON3 SPARC processor. -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=sparc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=leon3 - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/sparc/leon3/config/ut699.cfg b/bsps/sparc/leon3/config/ut699.cfg deleted file mode 100644 index a8fff49b3a..0000000000 --- a/bsps/sparc/leon3/config/ut699.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# -# Config file for the UT699 LEON3 SPARC processor. -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=sparc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=leon -mfix-ut699 - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/sparc/leon3/config/ut700.cfg b/bsps/sparc/leon3/config/ut700.cfg deleted file mode 100644 index bcca9010ed..0000000000 --- a/bsps/sparc/leon3/config/ut700.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# -# Config file for the UT699e/UT700 LEON3 SPARC processor. -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=sparc - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -CPU_CFLAGS = -mcpu=leon3 -mfix-ut700 - -# optimize flag: typically -O2 -CFLAGS_OPTIMIZE_V = -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -LDFLAGS = -Wl,--gc-sections diff --git a/bsps/x86_64/amd64/config/amd64.cfg b/bsps/x86_64/amd64/config/amd64.cfg deleted file mode 100644 index fe19a9ee55..0000000000 --- a/bsps/x86_64/amd64/config/amd64.cfg +++ /dev/null @@ -1,15 +0,0 @@ -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU = x86_64 - -CFLAGS_OPTIMIZE_V += -O2 -g -CFLAGS_OPTIMIZE_V += -ffunction-sections -fdata-sections - -# We can't have the red zone because interrupts will not respect that area. -CPU_CFLAGS = -mno-red-zone -# This flag tells GCC to not assume values will fit in 32-bit registers. This -# way we can avoid linker-time relocation errors spawning from values being -# larger than their optimized container sizes. -CPU_CFLAGS += -mcmodel=large - -LDFLAGS = -Wl,--gc-sections