forked from Imagelibrary/rtems
m68k/csb360: Fix warnings
This commit is contained in:
@@ -178,6 +178,11 @@ rtems_isr_entry set_vector(
|
|||||||
int type
|
int type
|
||||||
);
|
);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Prototypes for BSP methods which cross file boundaries
|
||||||
|
*/
|
||||||
|
void init5272(void);
|
||||||
|
|
||||||
#ifdef __cplusplus
|
#ifdef __cplusplus
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
|||||||
@@ -5,7 +5,9 @@
|
|||||||
* The name of this entry point is compiler dependent.
|
* The name of this entry point is compiler dependent.
|
||||||
* It jumps to the BSP which is responsible for performing
|
* It jumps to the BSP which is responsible for performing
|
||||||
* all initialization.
|
* all initialization.
|
||||||
*
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
* Copyright (C) 2004 Cogent Computer Systems
|
* Copyright (C) 2004 Cogent Computer Systems
|
||||||
* Author: Jay Monkman <jtm@lopingdog.com>
|
* Author: Jay Monkman <jtm@lopingdog.com>
|
||||||
*
|
*
|
||||||
|
|||||||
@@ -8,7 +8,9 @@
|
|||||||
* This initialization code based on hardware settings of dBUG
|
* This initialization code based on hardware settings of dBUG
|
||||||
* monitor. This must be changed if you like to run it immediately
|
* monitor. This must be changed if you like to run it immediately
|
||||||
* after reset.
|
* after reset.
|
||||||
*
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
* Copyright (C) 2000 OKTET Ltd., St.-Petersburg, Russia
|
* Copyright (C) 2000 OKTET Ltd., St.-Petersburg, Russia
|
||||||
* Author: Victor V. Vengerov <vvv@oktet.ru>
|
* Author: Victor V. Vengerov <vvv@oktet.ru>
|
||||||
*
|
*
|
||||||
@@ -25,7 +27,6 @@
|
|||||||
* http://www.rtems.org/license/LICENSE.
|
* http://www.rtems.org/license/LICENSE.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <rtems.h>
|
|
||||||
#include <bsp.h>
|
#include <bsp.h>
|
||||||
#include <mcf5272/mcf5272.h>
|
#include <mcf5272/mcf5272.h>
|
||||||
|
|
||||||
@@ -71,84 +72,75 @@ usb_regs_t *g_usb_regs = (void *) MCF5272_USB_BASE(BSP_MBAR);
|
|||||||
"nop\n\t" \
|
"nop\n\t" \
|
||||||
: : "d" (MCF5272_CACR_CINV) )
|
: : "d" (MCF5272_CACR_CINV) )
|
||||||
|
|
||||||
/* init5272 --
|
|
||||||
* Initialize MCF5272 on-chip modules
|
|
||||||
*
|
|
||||||
* PARAMETERS:
|
|
||||||
* none
|
|
||||||
*
|
|
||||||
* RETURNS:
|
|
||||||
* none
|
|
||||||
*/
|
|
||||||
void
|
|
||||||
init5272(void)
|
|
||||||
{
|
|
||||||
/* Invalidate the cache - WARNING: It won't complete for 64 clocks */
|
|
||||||
m68k_set_cacr(MCF5272_CACR_CINV);
|
|
||||||
|
|
||||||
/* Set Module Base Address register */
|
|
||||||
m68k_set_mbar((BSP_MBAR & MCF5272_MBAR_BA) | MCF5272_MBAR_V);
|
|
||||||
|
|
||||||
/* Set RAM Base Address register */
|
|
||||||
m68k_set_srambar((BSP_RAMBAR & MCF5272_RAMBAR_BA) | MCF5272_RAMBAR_V);
|
|
||||||
|
|
||||||
/* Set System Control Register:
|
|
||||||
* Enet has highest priority, 16384 bus cycles before timeout
|
|
||||||
*/
|
|
||||||
g_sim_regs->scr = (MCF5272_SCR_HWR_16384);
|
|
||||||
|
|
||||||
/* System Protection Register:
|
|
||||||
* Enable Hardware watchdog timer.
|
|
||||||
*/
|
|
||||||
g_sim_regs->spr = MCF5272_SPR_HWTEN;
|
|
||||||
|
|
||||||
/* Clear and mask all interrupts */
|
|
||||||
g_intctrl_regs->icr1 = 0x88888888;
|
|
||||||
g_intctrl_regs->icr2 = 0x88888888;
|
|
||||||
g_intctrl_regs->icr3 = 0x88888888;
|
|
||||||
g_intctrl_regs->icr4 = 0x88880000;
|
|
||||||
|
|
||||||
/* Copy the interrupt vector table to SRAM */
|
|
||||||
{
|
|
||||||
uint32_t *inttab = (uint32_t *)&INTERRUPT_VECTOR;
|
|
||||||
uint32_t *intvec = (uint32_t *)BSP_RAMBAR;
|
|
||||||
register int i;
|
|
||||||
for (i = 0; i < 256; i++)
|
|
||||||
{
|
|
||||||
*(intvec++) = *(inttab++);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
m68k_set_vbr(BSP_RAMBAR);
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Setup ACRs so that if cache turned on, periphal accesses
|
|
||||||
* are not messed up. (Non-cacheable, serialized)
|
|
||||||
*/
|
|
||||||
|
|
||||||
m68k_set_acr0(MCF5272_ACR_BASE(BSP_MEM_ADDR_SDRAM) |
|
|
||||||
MCF5272_ACR_MASK(BSP_MEM_MASK_SDRAM) |
|
|
||||||
MCF5272_ACR_EN |
|
|
||||||
MCF5272_ACR_SM_ANY);
|
|
||||||
|
|
||||||
/*
|
/*
|
||||||
m68k_set_acr1 (MCF5206E_ACR_BASE(BSP_MEM_ADDR_FLASH) |
|
* Initialize MCF5272 on-chip modules
|
||||||
MCF5206E_ACR_MASK(BSP_MEM_MASK_FLASH) |
|
*/
|
||||||
MCF5206E_ACR_EN |
|
void init5272(void)
|
||||||
MCF5206E_ACR_SM_ANY);
|
{
|
||||||
*/
|
/* Invalidate the cache - WARNING: It won't complete for 64 clocks */
|
||||||
|
m68k_set_cacr(MCF5272_CACR_CINV);
|
||||||
|
|
||||||
|
/* Set Module Base Address register */
|
||||||
|
m68k_set_mbar((BSP_MBAR & MCF5272_MBAR_BA) | MCF5272_MBAR_V);
|
||||||
|
|
||||||
|
/* Set RAM Base Address register */
|
||||||
|
m68k_set_srambar((BSP_RAMBAR & MCF5272_RAMBAR_BA) | MCF5272_RAMBAR_V);
|
||||||
|
|
||||||
|
/* Set System Control Register:
|
||||||
|
* Enet has highest priority, 16384 bus cycles before timeout
|
||||||
|
*/
|
||||||
|
g_sim_regs->scr = (MCF5272_SCR_HWR_16384);
|
||||||
|
|
||||||
|
/* System Protection Register:
|
||||||
|
* Enable Hardware watchdog timer.
|
||||||
|
*/
|
||||||
|
g_sim_regs->spr = MCF5272_SPR_HWTEN;
|
||||||
|
|
||||||
|
/* Clear and mask all interrupts */
|
||||||
|
g_intctrl_regs->icr1 = 0x88888888;
|
||||||
|
g_intctrl_regs->icr2 = 0x88888888;
|
||||||
|
g_intctrl_regs->icr3 = 0x88888888;
|
||||||
|
g_intctrl_regs->icr4 = 0x88880000;
|
||||||
|
|
||||||
|
/* Copy the interrupt vector table to SRAM */
|
||||||
|
{
|
||||||
|
uint32_t *inttab = (uint32_t *)&INTERRUPT_VECTOR;
|
||||||
|
uint32_t *intvec = (uint32_t *)BSP_RAMBAR;
|
||||||
|
register int i;
|
||||||
|
for (i = 0; i < 256; i++) {
|
||||||
|
*(intvec++) = *(inttab++);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
m68k_set_vbr(BSP_RAMBAR);
|
||||||
|
|
||||||
/* Enable the caches */
|
|
||||||
m68k_set_cacr(MCF5272_CACR_CENB |
|
|
||||||
MCF5272_CACR_DCM); /* Default is not cached */
|
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Copy data, clear BSS, switch stacks and call boot_card()
|
* Setup ACRs so that if cache turned on, periphal accesses
|
||||||
|
* are not messed up. (Non-cacheable, serialized)
|
||||||
*/
|
*/
|
||||||
|
m68k_set_acr0(MCF5272_ACR_BASE(BSP_MEM_ADDR_SDRAM) |
|
||||||
|
MCF5272_ACR_MASK(BSP_MEM_MASK_SDRAM) |
|
||||||
|
MCF5272_ACR_EN |
|
||||||
|
MCF5272_ACR_SM_ANY);
|
||||||
|
|
||||||
/*
|
/*
|
||||||
CopyDataClearBSSAndStart(BSP_MEM_SIZE_ESRAM - 0x400);
|
m68k_set_acr1 (MCF5206E_ACR_BASE(BSP_MEM_ADDR_FLASH) |
|
||||||
|
MCF5206E_ACR_MASK(BSP_MEM_MASK_FLASH) |
|
||||||
|
MCF5206E_ACR_EN |
|
||||||
|
MCF5206E_ACR_SM_ANY);
|
||||||
*/
|
*/
|
||||||
clear_bss();
|
|
||||||
start_csb360();
|
/* Enable the caches */
|
||||||
|
m68k_set_cacr(MCF5272_CACR_CENB |
|
||||||
|
MCF5272_CACR_DCM); /* Default is not cached */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Copy data, clear BSS, switch stacks and call boot_card()
|
||||||
|
*/
|
||||||
|
/*
|
||||||
|
CopyDataClearBSSAndStart(BSP_MEM_SIZE_ESRAM - 0x400);
|
||||||
|
*/
|
||||||
|
clear_bss();
|
||||||
|
start_csb360();
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|||||||
Reference in New Issue
Block a user