RTOS/rtems
1
0
Fork 0
forked from Imagelibrary/rtems
Code Pull Requests Activity

Patch rtems-rc-19990709-6-diff from Ralf Corsepius <corsepiu@faw.uni-ulm.de>

Browse Source 
applied.  This modified many Makefiles and custom files and makes many more
settings (network, multiprocessing, etc) gnerated by autoconf.
This commit is contained in:
Joel Sherrill
1999-08-06 17:55:25 +00:00
parent 22544db9d8
commit 3a8915e6ee
252 changed files with 5494 additions and 2496 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
aclocal/check-multiprocessing.m4
View File

@@ -1,4 +1,6 @@
dnl
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_MULTIPROCESSING,
[dnl
@@ -15,8 +17,7 @@ AC_CACHE_CHECK([whether BSP supports multiprocessing],
fi
else
rtems_cv_HAS_MP="no";
fi
])
fi])
if test "$rtems_cv_HAS_MP" = "yes"; then
HAS_MP="yes"
else

2
aclocal/check-rdbg.m4
View File

@@ -1,3 +1,5 @@
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_RDBG,
[dnl
AC_REQUIRE([RTEMS_TOP])dnl

6
c/Makefile.am
View File

@@ -2,13 +2,12 @@
# $Id$
#
AUTOMAKE_OPTIONS = foreign 1.4
ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
## NOTE: This Makefile.am is rather fragile to the value of RTEMS_BSP
## Esp. make clean and make distclean have unwanted side-effects
## if RTEMS_BSP is not properly set up.
AUTOMAKE_OPTIONS = foreign 1.4
ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
RTEMS_BSP = $(RTEMS_BSP_LIST)
## The '.' in SUBDIRS ensures that local make-targets (xxx-am) will be
## triggered before $(RTEMS_BSP_LIST) subdirectories are made.
@@ -16,7 +15,6 @@ SUBDIRS= \
. \
$(RTEMS_BSP)
## Use @RTEMS_BSP_LIST@ here, using $(RTEMS_BSP_LIST) would trigger
## this rule for invalid BSPs
@RTEMS_BSP_LIST@: src/configure

111
c/src/exec/aclocal.m4 vendored
View File

@@ -517,84 +517,6 @@ fi
])
])
dnl
dnl $Id$
dnl
dnl Check for target g++
dnl
dnl 98/05/20 Ralf Corsepius (corsepiu@faw.uni-ulm.de)
dnl Completely reworked
AC_DEFUN(RTEMS_PROG_CXX,
[
AC_BEFORE([$0], [AC_PROG_CXXCPP])dnl
AC_BEFORE([$0], [AC_PROG_CXX])dnl
AC_REQUIRE([RTEMS_TOOL_PREFIX])dnl
dnl Only accept g++ and c++
dnl NOTE: This might be too restrictive for native compilation
AC_PATH_PROGS(CXX_FOR_TARGET, "$program_prefix"g++ "$program_prefix"c++)
test -z "$CXX_FOR_TARGET" \
&& AC_MSG_ERROR([no acceptable c++ found in \$PATH])
dnl backup
rtems_save_CXX=$CXX
rtems_save_CXXFLAGS=$CXXFLAGS
dnl temporarily set CXX
CXX=$CXX_FOR_TARGET
AC_PROG_CXX_WORKS
AC_PROG_CXX_GNU
if test $ac_cv_prog_gxx = yes; then
GXX=yes
dnl Check whether -g works, even if CXXFLAGS is set, in case the package
dnl plays around with CXXFLAGS (such as to build both debugging and
dnl normal versions of a library), tasteless as that idea is.
ac_test_CXXFLAGS="${CXXFLAGS+set}"
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
AC_PROG_CXX_G
if test "$ac_test_CXXFLAGS" = set; then
CXXFLAGS="$ac_save_CXXFLAGS"
elif test $ac_cv_prog_cxx_g = yes; then
CXXFLAGS="-g -O2"
else
CXXFLAGS="-O2"
fi
else
GXX=
test "${CXXFLAGS+set}" = set || CXXFLAGS="-g"
fi
rtems_cv_prog_gxx=$ac_cv_prog_gxx
rtems_cv_prog_cxx_g=$ac_cv_prog_cxx_g
rtems_cv_prog_cxx_works=$ac_cv_prog_cxx_works
rtems_cv_prog_cxx_cross=$ac_cv_prog_cxx_cross
CXX=$rtems_save_CXX
CXXFLAGS=$rtems_save_CXXFLAGS
dnl restore initial values
unset ac_cv_prog_gxx
unset ac_cv_prog_cc_g
unset ac_cv_prog_cxx_works
unset ac_cv_prog_cxx_cross
])
AC_DEFUN(RTEMS_PROG_CXX_FOR_TARGET,
[
RTEMS_PROG_CXX
if test "$rtems_cv_prog_cc_cross" != "$rtems_cv_prog_cxx_cross"; then
AC_MSG_ERROR([***]
[Inconsistency in compiler configuration:]
[Target C compiler and Target C++ compiler]
[must both either be cross compilers or native compilers]
[Hint: If building a posix bsp: LD_LIBRARY_PATH?] )
fi
])
dnl
dnl $Id$
dnl
@@ -943,7 +865,9 @@ else
fi
])dnl
dnl
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_MULTIPROCESSING,
[dnl
@@ -960,8 +884,7 @@ AC_CACHE_CHECK([whether BSP supports multiprocessing],
fi
else
rtems_cv_HAS_MP="no";
fi
])
fi])
if test "$rtems_cv_HAS_MP" = "yes"; then
HAS_MP="yes"
else
@@ -970,6 +893,34 @@ fi
AC_SUBST(HAS_MP)
])
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_POSIX_API,
[dnl
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
AC_CACHE_CHECK([whether BSP supports libposix],
rtems_cv_HAS_POSIX_API,
[dnl
case "$RTEMS_CPU" in
unix*)
rtems_cv_HAS_POSIX_API="no"
;;
*)
if test "${RTEMS_HAS_POSIX_API}" = "yes"; then
rtems_cv_HAS_POSIX_API="yes";
else
rtems_cv_HAS_POSIX_API="disabled";
fi
;;
esac])
if test "$rtems_cv_HAS_POSIX_API" = "yes"; then
HAS_POSIX_API="yes";
else
HAS_POSIX_API="no";
fi
AC_SUBST(HAS_POSIX_API)dnl
])
dnl
dnl $Id$
dnl

323
c/src/exec/configure vendored
View File

@@ -1301,184 +1301,10 @@ esac
if test "$RTEMS_HAS_CPLUSPLUS" = "yes"; then
for ac_prog in "$program_prefix"g++ "$program_prefix"c++
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1314: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$CXX_FOR_TARGET" in
/*)
ac_cv_path_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test with a path.
;;
?:/*)
ac_cv_path_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_CXX_FOR_TARGET="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
;;
esac
fi
CXX_FOR_TARGET="$ac_cv_path_CXX_FOR_TARGET"
if test -n "$CXX_FOR_TARGET"; then
echo "$ac_t""$CXX_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
test -n "$CXX_FOR_TARGET" && break
done
test -z "$CXX_FOR_TARGET" \
&& { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; }
rtems_save_CXX=$CXX
rtems_save_CXXFLAGS=$CXXFLAGS
CXX=$CXX_FOR_TARGET
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1358: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross
cat > conftest.$ac_ext << EOF
#line 1369 "configure"
#include "confdefs.h"
int main(){return(0);}
EOF
if { (eval echo configure:1374: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cxx_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
ac_cv_prog_cxx_cross=no
else
ac_cv_prog_cxx_cross=yes
fi
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_prog_cxx_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
if test $ac_cv_prog_cxx_works = no; then
{ echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1400: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
echo "configure:1405: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.C <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1414: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
fi
fi
echo "$ac_t""$ac_cv_prog_gxx" 1>&6
if test $ac_cv_prog_gxx = yes; then
GXX=yes
ac_test_CXXFLAGS="${CXXFLAGS+set}"
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
echo "configure:1429: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.cc
if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
ac_cv_prog_cxx_g=yes
else
ac_cv_prog_cxx_g=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
if test "$ac_test_CXXFLAGS" = set; then
CXXFLAGS="$ac_save_CXXFLAGS"
elif test $ac_cv_prog_cxx_g = yes; then
CXXFLAGS="-g -O2"
else
CXXFLAGS="-O2"
fi
else
GXX=
test "${CXXFLAGS+set}" = set || CXXFLAGS="-g"
fi
rtems_cv_prog_gxx=$ac_cv_prog_gxx
rtems_cv_prog_cxx_g=$ac_cv_prog_cxx_g
rtems_cv_prog_cxx_works=$ac_cv_prog_cxx_works
rtems_cv_prog_cxx_cross=$ac_cv_prog_cxx_cross
CXX=$rtems_save_CXX
CXXFLAGS=$rtems_save_CXXFLAGS
unset ac_cv_prog_gxx
unset ac_cv_prog_cc_g
unset ac_cv_prog_cxx_works
unset ac_cv_prog_cxx_cross
if test "$rtems_cv_prog_cc_cross" != "$rtems_cv_prog_cxx_cross"; then
{ echo "configure: error: ***
Inconsistency in compiler configuration:
Target C compiler and Target C++ compiler
must both either be cross compilers or native compilers
Hint: If building a posix bsp: LD_LIBRARY_PATH? " 1>&2; exit 1; }
fi
fi
echo $ac_n "checking target's ar""... $ac_c" 1>&6
echo "configure:1482: checking target's ar" >&5
echo "configure:1308: checking target's ar" >&5
if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1511,7 +1337,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable AR_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:1515: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5
echo "configure:1341: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5
case "$AR_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -1528,7 +1354,7 @@ echo "configure:1515: checking whether environment variable AR_FOR_TARGET is an
# Extract the first word of ""$program_prefix"ar", so it can be a program name with args.
set dummy "$program_prefix"ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1532: checking for $ac_word" >&5
echo "configure:1358: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1565,7 +1391,7 @@ fi
echo $ac_n "checking target's as""... $ac_c" 1>&6
echo "configure:1569: checking target's as" >&5
echo "configure:1395: checking target's as" >&5
if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1598,7 +1424,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable AS_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:1602: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5
echo "configure:1428: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5
case "$AS_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -1615,7 +1441,7 @@ echo "configure:1602: checking whether environment variable AS_FOR_TARGET is an
# Extract the first word of ""$program_prefix"as", so it can be a program name with args.
set dummy "$program_prefix"as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1619: checking for $ac_word" >&5
echo "configure:1445: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1652,7 +1478,7 @@ fi
echo $ac_n "checking target's ld""... $ac_c" 1>&6
echo "configure:1656: checking target's ld" >&5
echo "configure:1482: checking target's ld" >&5
if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1685,7 +1511,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable LD_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:1689: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5
echo "configure:1515: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5
case "$LD_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -1702,7 +1528,7 @@ echo "configure:1689: checking whether environment variable LD_FOR_TARGET is an
# Extract the first word of ""$program_prefix"ld", so it can be a program name with args.
set dummy "$program_prefix"ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1706: checking for $ac_word" >&5
echo "configure:1532: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1739,7 +1565,7 @@ fi
echo $ac_n "checking target's nm""... $ac_c" 1>&6
echo "configure:1743: checking target's nm" >&5
echo "configure:1569: checking target's nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1772,7 +1598,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable NM_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:1776: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5
echo "configure:1602: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5
case "$NM_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -1789,7 +1615,7 @@ echo "configure:1776: checking whether environment variable NM_FOR_TARGET is an
# Extract the first word of ""$program_prefix"nm", so it can be a program name with args.
set dummy "$program_prefix"nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1793: checking for $ac_word" >&5
echo "configure:1619: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1827,7 +1653,7 @@ fi
echo $ac_n "checking target's ranlib""... $ac_c" 1>&6
echo "configure:1831: checking target's ranlib" >&5
echo "configure:1657: checking target's ranlib" >&5
if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1860,7 +1686,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable RANLIB_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:1864: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5
echo "configure:1690: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5
case "$RANLIB_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -1877,7 +1703,7 @@ echo "configure:1864: checking whether environment variable RANLIB_FOR_TARGET is
# Extract the first word of ""$program_prefix"ranlib", so it can be a program name with args.
set dummy "$program_prefix"ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1881: checking for $ac_word" >&5
echo "configure:1707: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1916,7 +1742,7 @@ fi
# ranlib wasn't found; check if ar -s is available
echo $ac_n "checking whether $AR_FOR_TARGET -s works""... $ac_c" 1>&6
echo "configure:1920: checking whether $AR_FOR_TARGET -s works" >&5
echo "configure:1746: checking whether $AR_FOR_TARGET -s works" >&5
if eval "test \"`echo '$''{'rtems_cv_AR_FOR_TARGET_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1925,8 +1751,8 @@ cat > conftest.$ac_ext <<EOF
int foo( int b )
{ return b; }
EOF
if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:1929: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
&& { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:1930: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:1755: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
&& { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:1756: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
&& test -s conftest.a ; \
then
rtems_cv_AR_FOR_TARGET_S="yes"
@@ -1951,7 +1777,7 @@ echo "$ac_t""$rtems_cv_AR_FOR_TARGET_S" 1>&6
echo $ac_n "checking target's objcopy""... $ac_c" 1>&6
echo "configure:1955: checking target's objcopy" >&5
echo "configure:1781: checking target's objcopy" >&5
if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1984,7 +1810,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:1988: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5
echo "configure:1814: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5
case "$OBJCOPY_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -2001,7 +1827,7 @@ echo "configure:1988: checking whether environment variable OBJCOPY_FOR_TARGET i
# Extract the first word of ""$program_prefix"objcopy", so it can be a program name with args.
set dummy "$program_prefix"objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2005: checking for $ac_word" >&5
echo "configure:1831: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2038,7 +1864,7 @@ fi
echo $ac_n "checking target's size""... $ac_c" 1>&6
echo "configure:2042: checking target's size" >&5
echo "configure:1868: checking target's size" >&5
if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2071,7 +1897,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable SIZE_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:2075: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5
echo "configure:1901: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5
case "$SIZE_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -2088,7 +1914,7 @@ echo "configure:2075: checking whether environment variable SIZE_FOR_TARGET is a
# Extract the first word of ""$program_prefix"size", so it can be a program name with args.
set dummy "$program_prefix"size; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2092: checking for $ac_word" >&5
echo "configure:1918: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2125,7 +1951,7 @@ fi
echo $ac_n "checking target's strip""... $ac_c" 1>&6
echo "configure:2129: checking target's strip" >&5
echo "configure:1955: checking target's strip" >&5
if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2158,7 +1984,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable STRIP_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:2162: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5
echo "configure:1988: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5
case "$STRIP_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -2175,7 +2001,7 @@ echo "configure:2162: checking whether environment variable STRIP_FOR_TARGET is
# Extract the first word of ""$program_prefix"strip", so it can be a program name with args.
set dummy "$program_prefix"strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2179: checking for $ac_word" >&5
echo "configure:2005: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2214,7 +2040,7 @@ fi
if test "${target_cpu}" = "i386"; then
echo $ac_n "checking for 16 bit mode assembler support""... $ac_c" 1>&6
echo "configure:2218: checking for 16 bit mode assembler support" >&5
echo "configure:2044: checking for 16 bit mode assembler support" >&5
if eval "test \"`echo '$''{'rtems_cv_prog_gas_code16'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2224,7 +2050,7 @@ else
addr32
lgdt 0
EOF
if { ac_try='$AS_FOR_TARGET -o conftest.o conftest.s'; { (eval echo configure:2228: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
if { ac_try='$AS_FOR_TARGET -o conftest.o conftest.s'; { (eval echo configure:2054: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
rtems_cv_prog_gas_code16=yes
else
rtems_cv_prog_gas_code16=no
@@ -2240,7 +2066,7 @@ echo "$ac_t""$rtems_cv_prog_gas_code16" 1>&6
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2244: checking for $ac_word" >&5
echo "configure:2070: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2270,7 +2096,7 @@ if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2274: checking for $ac_word" >&5
echo "configure:2100: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2321,7 +2147,7 @@ fi
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2325: checking for $ac_word" >&5
echo "configure:2151: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2353,7 +2179,7 @@ fi
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:2357: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
echo "configure:2183: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2364,12 +2190,12 @@ cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext << EOF
#line 2368 "configure"
#line 2194 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
if { (eval echo configure:2373: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:2199: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
@@ -2395,12 +2221,12 @@ if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:2399: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "configure:2225: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:2404: checking whether we are using GNU C" >&5
echo "configure:2230: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2409,7 +2235,7 @@ else
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2413: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2239: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
@@ -2428,7 +2254,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:2432: checking whether ${CC-cc} accepts -g" >&5
echo "configure:2258: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2464,7 +2290,7 @@ if test "$RTEMS_CPU" = "unix" ; then
echo $ac_n "checking whether $RTEMS_HOST supports System V semaphores""... $ac_c" 1>&6
echo "configure:2468: checking whether $RTEMS_HOST supports System V semaphores" >&5
echo "configure:2294: checking whether $RTEMS_HOST supports System V semaphores" >&5
if eval "test \"`echo '$''{'rtems_cv_sysv_sem'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2473,7 +2299,7 @@ if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
#line 2477 "configure"
#line 2303 "configure"
#include "confdefs.h"
#include <sys/types.h>
@@ -2499,7 +2325,7 @@ int main () {
}
EOF
if { (eval echo configure:2503: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
if { (eval echo configure:2329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
rtems_cv_sysv_sem="yes"
else
@@ -2522,7 +2348,7 @@ echo "$ac_t""$rtems_cv_sysv_sem" 1>&6
echo $ac_n "checking whether $RTEMS_HOST supports System V shared memory""... $ac_c" 1>&6
echo "configure:2526: checking whether $RTEMS_HOST supports System V shared memory" >&5
echo "configure:2352: checking whether $RTEMS_HOST supports System V shared memory" >&5
if eval "test \"`echo '$''{'rtems_cv_sysv_shm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2531,7 +2357,7 @@ if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
#line 2535 "configure"
#line 2361 "configure"
#include "confdefs.h"
#include <sys/types.h>
@@ -2547,7 +2373,7 @@ int main () {
}
EOF
if { (eval echo configure:2551: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
if { (eval echo configure:2377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
rtems_cv_sysv_shm="yes"
else
@@ -2570,7 +2396,7 @@ echo "$ac_t""$rtems_cv_sysv_shm" 1>&6
echo $ac_n "checking whether $RTEMS_HOST supports System V messages""... $ac_c" 1>&6
echo "configure:2574: checking whether $RTEMS_HOST supports System V messages" >&5
echo "configure:2400: checking whether $RTEMS_HOST supports System V messages" >&5
if eval "test \"`echo '$''{'rtems_cv_sysv_msg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2579,7 +2405,7 @@ if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
#line 2583 "configure"
#line 2409 "configure"
#include "confdefs.h"
#include <sys/types.h>
@@ -2595,7 +2421,7 @@ int main () {
}
EOF
if { (eval echo configure:2599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
if { (eval echo configure:2425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
rtems_cv_sysv_msg="yes"
else
@@ -2619,7 +2445,7 @@ fi
echo $ac_n "checking for newlib""... $ac_c" 1>&6
echo "configure:2623: checking for newlib" >&5
echo "configure:2449: checking for newlib" >&5
if eval "test \"`echo '$''{'rtems_cv_use_newlib'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2628,14 +2454,14 @@ else
CC=$CC_FOR_TARGET
cat > conftest.$ac_ext <<EOF
#line 2632 "configure"
#line 2458 "configure"
#include "confdefs.h"
extern int not_required_by_rtems() ;
int main() {
not_required_by_rtems()
; return 0; }
EOF
if { (eval echo configure:2639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:2465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
rtems_cv_use_newlib="yes"
else
@@ -2646,14 +2472,14 @@ rm -f conftest*
if test -z "$rtems_cv_use_newlib"; then
cat > conftest.$ac_ext <<EOF
#line 2650 "configure"
#line 2476 "configure"
#include "confdefs.h"
extern int rtems_provides_crt0 ;
int main() {
rtems_provides_crt0 = 0
; return 0; }
EOF
if { (eval echo configure:2657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:2483: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
rtems_cv_use_newlib="yes"
else
@@ -2674,16 +2500,15 @@ RTEMS_USE_NEWLIB="$rtems_cv_use_newlib"
# Check if there is custom/*.cfg for this BSP
echo $ac_n "checking for make/custom/$RTEMS_BSP.cfg""... $ac_c" 1>&6
echo "configure:2678: checking for make/custom/$RTEMS_BSP.cfg" >&5
echo "configure:2504: checking for make/custom/$RTEMS_BSP.cfg" >&5
if test -r "$srcdir/$RTEMS_TOPdir/make/custom/$RTEMS_BSP.cfg"; then
echo "$ac_t""yes" 1>&6
else
{ echo "configure: error: no" 1>&2; exit 1; }
fi
echo $ac_n "checking whether BSP supports multiprocessing""... $ac_c" 1>&6
echo "configure:2687: checking whether BSP supports multiprocessing" >&5
echo "configure:2512: checking whether BSP supports multiprocessing" >&5
if eval "test \"`echo '$''{'rtems_cv_HAS_MP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2696,7 +2521,6 @@ else
else
rtems_cv_HAS_MP="no";
fi
fi
echo "$ac_t""$rtems_cv_HAS_MP" 1>&6
@@ -2707,11 +2531,37 @@ HAS_MP="no"
fi
echo $ac_n "checking whether BSP supports libposix""... $ac_c" 1>&6
echo "configure:2536: checking whether BSP supports libposix" >&5
if eval "test \"`echo '$''{'rtems_cv_HAS_POSIX_API'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$RTEMS_CPU" in
unix*)
rtems_cv_HAS_POSIX_API="no"
;;
*)
if test "${RTEMS_HAS_POSIX_API}" = "yes"; then
rtems_cv_HAS_POSIX_API="yes";
else
rtems_cv_HAS_POSIX_API="disabled";
fi
;;
esac
fi
echo "$ac_t""$rtems_cv_HAS_POSIX_API" 1>&6
if test "$rtems_cv_HAS_POSIX_API" = "yes"; then
HAS_POSIX_API="yes";
else
HAS_POSIX_API="no";
fi
# find all the Executive Makefiles
echo $ac_n "checking for Makefile.in in score/cpu/$RTEMS_CPU""... $ac_c" 1>&6
echo "configure:2715: checking for Makefile.in in score/cpu/$RTEMS_CPU" >&5
echo "configure:2565: checking for Makefile.in in score/cpu/$RTEMS_CPU" >&5
if test -d $srcdir/score/cpu/$RTEMS_CPU; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -2728,7 +2578,7 @@ fi
# If RTEMS macros are enabled, then use them. Otherwise, use inlines.
if test "$RTEMS_USE_MACROS" = "yes"; then
inline_dir="macros"
if test "$RTEMS_HAS_POSIX_API" = "yes"; then
if test "$HAS_POSIX_API" = "yes"; then
# The problem is that there is currently no code in posix/macros :)
{ echo "configure: error: Macros are not implemented for the POSIX API" 1>&2; exit 1; }
fi
@@ -2736,7 +2586,7 @@ else
inline_dir="inline"
fi
if test "$RTEMS_HAS_POSIX_API" = "yes"; then
if test "$HAS_POSIX_API" = "yes"; then
makefiles="$makefiles posix/Makefile"
makefiles="$makefiles posix/src/Makefile"
makefiles="$makefiles posix/include/Makefile"
@@ -2762,7 +2612,6 @@ fi
# Try to explicitly list a Makefile here
trap '' 1 2 15
cat > confcache <<\EOF
@@ -2981,7 +2830,6 @@ s%@INSTALL_CHANGE@%$INSTALL_CHANGE%g
s%@PACKHEX@%$PACKHEX%g
s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
s%@GCCSED@%$GCCSED%g
s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
@@ -2994,9 +2842,9 @@ s%@RTEMS_GAS_CODE16@%$RTEMS_GAS_CODE16%g
s%@CC@%$CC%g
s%@RTEMS_USE_NEWLIB@%$RTEMS_USE_NEWLIB%g
s%@HAS_MP@%$HAS_MP%g
s%@HAS_POSIX_API@%$HAS_POSIX_API%g
s%@RTEMS_VERSION@%$RTEMS_VERSION%g
s%@rtems_cv_prog_cc_cross@%$rtems_cv_prog_cc_cross%g
s%@RTEMS_HAS_CPLUSPLUS@%$RTEMS_HAS_CPLUSPLUS%g
s%@RTEMS_USE_GCC272@%$RTEMS_USE_GCC272%g
s%@program_prefix@%$program_prefix%g
s%@CC_CFLAGS_DEFAULT@%$CC_CFLAGS_DEFAULT%g
@@ -3148,4 +2996,3 @@ chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1

13
c/src/exec/configure.in
View File

@@ -33,11 +33,6 @@ RTEMS_PROJECT_ROOT
dnl check target cc
RTEMS_PROG_CC_FOR_TARGET
dnl check for g++
if test "$RTEMS_HAS_CPLUSPLUS" = "yes"; then
RTEMS_PROG_CXX_FOR_TARGET
fi
RTEMS_CANONICALIZE_TOOLS
dnl if this is an i386, does gas have good code16 support?
@@ -49,8 +44,8 @@ RTEMS_CHECK_NEWLIB
# Check if there is custom/*.cfg for this BSP
RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP)
RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP)
RTEMS_CHECK_POSIX_API(RTEMS_BSP)
# find all the Executive Makefiles
RTEMS_CHECK_MAKEFILE(score/cpu/$RTEMS_CPU)
@@ -58,7 +53,7 @@ RTEMS_CHECK_MAKEFILE(score/cpu/$RTEMS_CPU)
# If RTEMS macros are enabled, then use them. Otherwise, use inlines.
if test "$RTEMS_USE_MACROS" = "yes"; then
inline_dir="macros"
if test "$RTEMS_HAS_POSIX_API" = "yes"; then
if test "$HAS_POSIX_API" = "yes"; then
# The problem is that there is currently no code in posix/macros :)
AC_MSG_ERROR(Macros are not implemented for the POSIX API)
fi
@@ -66,7 +61,7 @@ else
inline_dir="inline"
fi
if test "$RTEMS_HAS_POSIX_API" = "yes"; then
if test "$HAS_POSIX_API" = "yes"; then
makefiles="$makefiles posix/Makefile"
makefiles="$makefiles posix/src/Makefile"
makefiles="$makefiles posix/include/Makefile"
@@ -85,7 +80,6 @@ fi
AC_SUBST(RTEMS_VERSION)
AC_SUBST(rtems_cv_prog_cc_cross)
AC_SUBST(RTEMS_HAS_CPLUSPLUS)
AC_SUBST(RTEMS_USE_GCC272)
AC_SUBST(program_prefix)
AC_SUBST(CC_CFLAGS_DEFAULT)
@@ -129,4 +123,3 @@ wrapup/Makefile
wrapup/rtems/Makefile
$makefiles
)

98
c/src/lib/aclocal.m4 vendored
View File

@@ -134,44 +134,6 @@ AC_SUBST(RTEMS_HAS_MULTIPROCESSING)dnl
dnl $Id$
AC_DEFUN(RTEMS_ENABLE_POSIX,
[
AC_ARG_ENABLE(posix,
[ --enable-posix enable posix interface],
[case "${enableval}" in
yes) RTEMS_HAS_POSIX_API=yes ;;
no) RTEMS_HAS_POSIX_API=no ;;
*) AC_MSG_ERROR(bad value ${enableval} for enable-posix option) ;;
esac],[RTEMS_HAS_POSIX_API=yes])
AC_SUBST(RTEMS_HAS_POSIX_API)
changequote(,)dnl
case "${target}" in
# hpux unix port should go here
i[3456]86-go32-rtems*)
RTEMS_HAS_POSIX_API=no
;;
i[3456]86-pc-linux*) # unix "simulator" port
RTEMS_HAS_POSIX_API=no
;;
i[3456]86-*freebsd2*) # unix "simulator" port
RTEMS_HAS_POSIX_API=no
;;
no_cpu-*rtems*)
RTEMS_HAS_POSIX_API=no
;;
sparc-sun-solaris*) # unix "simulator" port
RTEMS_HAS_POSIX_API=no
;;
*)
;;
esac
changequote([,])dnl
AC_SUBST(RTEMS_HAS_POSIX_API)
])
dnl $Id$
AC_DEFUN(RTEMS_ENABLE_NETWORKING,
[
AC_ARG_ENABLE(networking,
@@ -200,20 +162,6 @@ AC_SUBST(RTEMS_HAS_RDBG)dnl
dnl $Id$
AC_DEFUN(RTEMS_ENABLE_INLINES,
[AC_ARG_ENABLE(rtems-inlines,
[ --enable-rtems-inlines enable RTEMS inline functions]
[ (default:enabled, disable to use macros)],
[case "${enableval}" in
yes) RTEMS_USE_MACROS=no ;;
no) RTEMS_USE_MACROS=yes ;;
*) AC_MSG_ERROR(bad value ${enableval} for disable-rtems-inlines option) ;;
esac],[RTEMS_USE_MACROS=no])
AC_SUBST(RTEMS_USE_MACROS)dnl
])
dnl $Id$
AC_DEFUN(RTEMS_ENABLE_CXX,
[
AC_ARG_ENABLE(cxx,
@@ -948,7 +896,9 @@ else
fi
])dnl
dnl
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_MULTIPROCESSING,
[dnl
@@ -965,8 +915,7 @@ AC_CACHE_CHECK([whether BSP supports multiprocessing],
fi
else
rtems_cv_HAS_MP="no";
fi
])
fi])
if test "$rtems_cv_HAS_MP" = "yes"; then
HAS_MP="yes"
else
@@ -975,6 +924,45 @@ fi
AC_SUBST(HAS_MP)
])
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_CXX,
[dnl
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
AC_REQUIRE([RTEMS_PROG_CXX_FOR_TARGET])dnl
AC_CACHE_VAL(rtems_cv_HAS_CPLUSPLUS,
[dnl
if test "$RTEMS_HAS_CPLUSPLUS" = "yes"; then
if test -n "$CXX_FOR_TARGET"; then
rtems_cv_HAS_CPLUSPLUS="yes";
else
rtems_cv_HAS_CPLUSPLUS="no";
fi
else
rtems_cv_HAS_CPLUSPLUS="no";
fi
])dnl
HAS_CPLUSPLUS="$rtems_cv_HAS_CPLUSPLUS";
AC_SUBST(HAS_CPLUSPLUS)dnl
])
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_NETWORKING,
[dnl
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
AC_CACHE_VAL(rtems_cv_HAS_NETWORKING,
[dnl
if test "$RTEMS_HAS_NETWORKING" = "yes"; then
rtems_cv_HAS_NETWORKING="yes";
else
rtems_cv_HAS_NETWORKING="no";
fi
])dnl
HAS_NETWORKING="$rtems_cv_HAS_NETWORKING";
AC_SUBST(HAS_NETWORKING)dnl
])
dnl
dnl $Id$
dnl
@@ -1032,6 +1020,8 @@ fi
])
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_RDBG,
[dnl
AC_REQUIRE([RTEMS_TOP])dnl

305
c/src/lib/configure vendored
View File

@@ -18,15 +18,10 @@ ac_help="$ac_help
(and sometimes confusing) to the casual installer"
ac_help="$ac_help
--enable-multiprocessing enable multiprocessing interface"
ac_help="$ac_help
--enable-posix enable posix interface"
ac_help="$ac_help
--enable-networking enable TCP/IP stack"
ac_help="$ac_help
--enable-rdbg enable remote debugger"
ac_help="$ac_help
--enable-rtems-inlines enable RTEMS inline functions
(default:enabled, disable to use macros)"
ac_help="$ac_help
--enable-cxx enable C++ support,
and build the rtems++ library"
@@ -569,7 +564,7 @@ RTEMS_TOPdir="../../..";
echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6
echo "configure:573: checking for RTEMS Version" >&5
echo "configure:568: checking for RTEMS Version" >&5
if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then
RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \
sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'`
@@ -602,7 +597,7 @@ ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:606: checking whether ${MAKE-make} sets \${MAKE}" >&5
echo "configure:601: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -657,7 +652,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:661: checking host system type" >&5
echo "configure:656: checking host system type" >&5
host_alias=$host
case "$host_alias" in
@@ -678,7 +673,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
echo "configure:682: checking target system type" >&5
echo "configure:677: checking target system type" >&5
target_alias=$target
case "$target_alias" in
@@ -696,7 +691,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:700: checking build system type" >&5
echo "configure:695: checking build system type" >&5
build_alias=$build
case "$build_alias" in
@@ -719,7 +714,7 @@ test "$host_alias" != "$target_alias" &&
program_prefix=${target_alias}-
echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6
echo "configure:723: checking rtems target cpu" >&5
echo "configure:718: checking rtems target cpu" >&5
case "${target}" in
# hpux unix port should go here
i[3456]86-go32-rtems*)
@@ -746,7 +741,7 @@ echo "$ac_t""$RTEMS_CPU" 1>&6
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:750: checking whether to enable maintainer-specific portions of Makefiles" >&5
echo "configure:745: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
@@ -784,43 +779,6 @@ fi
# Check whether --enable-posix or --disable-posix was given.
if test "${enable_posix+set}" = set; then
enableval="$enable_posix"
case "${enableval}" in
yes) RTEMS_HAS_POSIX_API=yes ;;
no) RTEMS_HAS_POSIX_API=no ;;
*) { echo "configure: error: bad value ${enableval} for enable-posix option" 1>&2; exit 1; } ;;
esac
else
RTEMS_HAS_POSIX_API=yes
fi
case "${target}" in
# hpux unix port should go here
i[3456]86-go32-rtems*)
RTEMS_HAS_POSIX_API=no
;;
i[3456]86-pc-linux*) # unix "simulator" port
RTEMS_HAS_POSIX_API=no
;;
i[3456]86-*freebsd2*) # unix "simulator" port
RTEMS_HAS_POSIX_API=no
;;
no_cpu-*rtems*)
RTEMS_HAS_POSIX_API=no
;;
sparc-sun-solaris*) # unix "simulator" port
RTEMS_HAS_POSIX_API=no
;;
*)
;;
esac
# Check whether --enable-networking or --disable-networking was given.
if test "${enable_networking+set}" = set; then
enableval="$enable_networking"
@@ -848,19 +806,6 @@ else
fi
# Check whether --enable-rtems-inlines or --disable-rtems-inlines was given.
if test "${enable_rtems_inlines+set}" = set; then
enableval="$enable_rtems_inlines"
case "${enableval}" in
yes) RTEMS_USE_MACROS=no ;;
no) RTEMS_USE_MACROS=yes ;;
*) { echo "configure: error: bad value ${enableval} for disable-rtems-inlines option" 1>&2; exit 1; } ;;
esac
else
RTEMS_USE_MACROS=no
fi
# Check whether --enable-cxx or --disable-cxx was given.
if test "${enable_cxx+set}" = set; then
@@ -938,7 +883,7 @@ fi
echo $ac_n "checking for RTEMS_BSP""... $ac_c" 1>&6
echo "configure:942: checking for RTEMS_BSP" >&5
echo "configure:887: checking for RTEMS_BSP" >&5
if eval "test \"`echo '$''{'rtems_cv_RTEMS_BSP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -965,7 +910,7 @@ echo "$ac_t""${RTEMS_BSP}" 1>&6
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:969: checking for a BSD compatible install" >&5
echo "configure:914: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1022,7 +967,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
# Is this a supported CPU?
echo $ac_n "checking if cpu $RTEMS_CPU is supported""... $ac_c" 1>&6
echo "configure:1026: checking if cpu $RTEMS_CPU is supported" >&5
echo "configure:971: checking if cpu $RTEMS_CPU is supported" >&5
if test -d "$srcdir/$RTEMS_TOPdir/c/src/exec/score/cpu/$RTEMS_CPU"; then
echo "$ac_t""yes" 1>&6
else
@@ -1083,7 +1028,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1087: checking for $ac_word" >&5
echo "configure:1032: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1127,7 +1072,7 @@ rtems_save_CFLAGS=$CFLAGS
CC=$CC_FOR_TARGET
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1131: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
echo "configure:1076: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1138,12 +1083,12 @@ cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext << EOF
#line 1142 "configure"
#line 1087 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
if { (eval echo configure:1147: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:1092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
@@ -1169,12 +1114,12 @@ if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1173: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "configure:1118: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1178: checking whether we are using GNU C" >&5
echo "configure:1123: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1183,7 +1128,7 @@ else
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1187: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1132: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
@@ -1198,7 +1143,7 @@ if test $ac_cv_prog_gcc = yes; then
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1202: checking whether ${CC-cc} accepts -g" >&5
echo "configure:1147: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1240,7 +1185,7 @@ unset ac_cv_prog_cc_cross
echo $ac_n "checking whether $CC_FOR_TARGET accepts -specs""... $ac_c" 1>&6
echo "configure:1244: checking whether $CC_FOR_TARGET accepts -specs" >&5
echo "configure:1189: checking whether $CC_FOR_TARGET accepts -specs" >&5
if eval "test \"`echo '$''{'rtems_cv_gcc_specs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1261,7 +1206,7 @@ echo "$ac_t""$rtems_cv_gcc_specs" 1>&6
echo $ac_n "checking whether $CC_FOR_TARGET accepts --pipe""... $ac_c" 1>&6
echo "configure:1265: checking whether $CC_FOR_TARGET accepts --pipe" >&5
echo "configure:1210: checking whether $CC_FOR_TARGET accepts --pipe" >&5
if eval "test \"`echo '$''{'rtems_cv_gcc_pipe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1309,7 +1254,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1313: checking for $ac_word" >&5
echo "configure:1258: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1353,7 +1298,7 @@ rtems_save_CXXFLAGS=$CXXFLAGS
CXX=$CXX_FOR_TARGET
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1357: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
echo "configure:1302: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1364,12 +1309,12 @@ cross_compiling=$ac_cv_prog_cxx_cross
cat > conftest.$ac_ext << EOF
#line 1368 "configure"
#line 1313 "configure"
#include "confdefs.h"
int main(){return(0);}
EOF
if { (eval echo configure:1373: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:1318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cxx_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
@@ -1395,12 +1340,12 @@ if test $ac_cv_prog_cxx_works = no; then
{ echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1399: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "configure:1344: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
echo "configure:1404: checking whether we are using GNU C++" >&5
echo "configure:1349: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1409,7 +1354,7 @@ else
yes;
#endif
EOF
if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1413: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1358: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
@@ -1424,7 +1369,7 @@ if test $ac_cv_prog_gxx = yes; then
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
echo "configure:1428: checking whether ${CXX-g++} accepts -g" >&5
echo "configure:1373: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1477,7 +1422,7 @@ fi
echo $ac_n "checking target's ar""... $ac_c" 1>&6
echo "configure:1481: checking target's ar" >&5
echo "configure:1426: checking target's ar" >&5
if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1510,7 +1455,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable AR_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:1514: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5
echo "configure:1459: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5
case "$AR_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -1527,7 +1472,7 @@ echo "configure:1514: checking whether environment variable AR_FOR_TARGET is an
# Extract the first word of ""$program_prefix"ar", so it can be a program name with args.
set dummy "$program_prefix"ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1531: checking for $ac_word" >&5
echo "configure:1476: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1564,7 +1509,7 @@ fi
echo $ac_n "checking target's as""... $ac_c" 1>&6
echo "configure:1568: checking target's as" >&5
echo "configure:1513: checking target's as" >&5
if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1597,7 +1542,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable AS_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:1601: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5
echo "configure:1546: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5
case "$AS_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -1614,7 +1559,7 @@ echo "configure:1601: checking whether environment variable AS_FOR_TARGET is an
# Extract the first word of ""$program_prefix"as", so it can be a program name with args.
set dummy "$program_prefix"as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1618: checking for $ac_word" >&5
echo "configure:1563: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1651,7 +1596,7 @@ fi
echo $ac_n "checking target's ld""... $ac_c" 1>&6
echo "configure:1655: checking target's ld" >&5
echo "configure:1600: checking target's ld" >&5
if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1684,7 +1629,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable LD_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:1688: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5
echo "configure:1633: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5
case "$LD_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -1701,7 +1646,7 @@ echo "configure:1688: checking whether environment variable LD_FOR_TARGET is an
# Extract the first word of ""$program_prefix"ld", so it can be a program name with args.
set dummy "$program_prefix"ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1705: checking for $ac_word" >&5
echo "configure:1650: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1738,7 +1683,7 @@ fi
echo $ac_n "checking target's nm""... $ac_c" 1>&6
echo "configure:1742: checking target's nm" >&5
echo "configure:1687: checking target's nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1771,7 +1716,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable NM_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:1775: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5
echo "configure:1720: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5
case "$NM_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -1788,7 +1733,7 @@ echo "configure:1775: checking whether environment variable NM_FOR_TARGET is an
# Extract the first word of ""$program_prefix"nm", so it can be a program name with args.
set dummy "$program_prefix"nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1792: checking for $ac_word" >&5
echo "configure:1737: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1826,7 +1771,7 @@ fi
echo $ac_n "checking target's ranlib""... $ac_c" 1>&6
echo "configure:1830: checking target's ranlib" >&5
echo "configure:1775: checking target's ranlib" >&5
if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1859,7 +1804,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable RANLIB_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:1863: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5
echo "configure:1808: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5
case "$RANLIB_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -1876,7 +1821,7 @@ echo "configure:1863: checking whether environment variable RANLIB_FOR_TARGET is
# Extract the first word of ""$program_prefix"ranlib", so it can be a program name with args.
set dummy "$program_prefix"ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1880: checking for $ac_word" >&5
echo "configure:1825: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1915,7 +1860,7 @@ fi
# ranlib wasn't found; check if ar -s is available
echo $ac_n "checking whether $AR_FOR_TARGET -s works""... $ac_c" 1>&6
echo "configure:1919: checking whether $AR_FOR_TARGET -s works" >&5
echo "configure:1864: checking whether $AR_FOR_TARGET -s works" >&5
if eval "test \"`echo '$''{'rtems_cv_AR_FOR_TARGET_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1924,8 +1869,8 @@ cat > conftest.$ac_ext <<EOF
int foo( int b )
{ return b; }
EOF
if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:1928: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
&& { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:1929: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:1873: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
&& { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:1874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
&& test -s conftest.a ; \
then
rtems_cv_AR_FOR_TARGET_S="yes"
@@ -1950,7 +1895,7 @@ echo "$ac_t""$rtems_cv_AR_FOR_TARGET_S" 1>&6
echo $ac_n "checking target's objcopy""... $ac_c" 1>&6
echo "configure:1954: checking target's objcopy" >&5
echo "configure:1899: checking target's objcopy" >&5
if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1983,7 +1928,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:1987: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5
echo "configure:1932: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5
case "$OBJCOPY_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -2000,7 +1945,7 @@ echo "configure:1987: checking whether environment variable OBJCOPY_FOR_TARGET i
# Extract the first word of ""$program_prefix"objcopy", so it can be a program name with args.
set dummy "$program_prefix"objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2004: checking for $ac_word" >&5
echo "configure:1949: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2037,7 +1982,7 @@ fi
echo $ac_n "checking target's size""... $ac_c" 1>&6
echo "configure:2041: checking target's size" >&5
echo "configure:1986: checking target's size" >&5
if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2070,7 +2015,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable SIZE_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:2074: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5
echo "configure:2019: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5
case "$SIZE_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -2087,7 +2032,7 @@ echo "configure:2074: checking whether environment variable SIZE_FOR_TARGET is a
# Extract the first word of ""$program_prefix"size", so it can be a program name with args.
set dummy "$program_prefix"size; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2091: checking for $ac_word" >&5
echo "configure:2036: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2124,7 +2069,7 @@ fi
echo $ac_n "checking target's strip""... $ac_c" 1>&6
echo "configure:2128: checking target's strip" >&5
echo "configure:2073: checking target's strip" >&5
if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2157,7 +2102,7 @@ else
# will override the environment variable, which isn't what the user
# intends
echo $ac_n "checking whether environment variable STRIP_FOR_TARGET is an absolute path""... $ac_c" 1>&6
echo "configure:2161: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5
echo "configure:2106: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5
case "$STRIP_FOR_TARGET" in
/*) # valid
echo "$ac_t"""yes"" 1>&6
@@ -2174,7 +2119,7 @@ echo "configure:2161: checking whether environment variable STRIP_FOR_TARGET is
# Extract the first word of ""$program_prefix"strip", so it can be a program name with args.
set dummy "$program_prefix"strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2178: checking for $ac_word" >&5
echo "configure:2123: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2213,7 +2158,7 @@ fi
if test "${target_cpu}" = "i386"; then
echo $ac_n "checking for 16 bit mode assembler support""... $ac_c" 1>&6
echo "configure:2217: checking for 16 bit mode assembler support" >&5
echo "configure:2162: checking for 16 bit mode assembler support" >&5
if eval "test \"`echo '$''{'rtems_cv_prog_gas_code16'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2223,7 +2168,7 @@ else
addr32
lgdt 0
EOF
if { ac_try='$AS_FOR_TARGET -o conftest.o conftest.s'; { (eval echo configure:2227: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
if { ac_try='$AS_FOR_TARGET -o conftest.o conftest.s'; { (eval echo configure:2172: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
rtems_cv_prog_gas_code16=yes
else
rtems_cv_prog_gas_code16=no
@@ -2248,7 +2193,7 @@ fi;
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2252: checking for $ac_word" >&5
echo "configure:2197: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2278,7 +2223,7 @@ if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2282: checking for $ac_word" >&5
echo "configure:2227: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2329,7 +2274,7 @@ fi
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2333: checking for $ac_word" >&5
echo "configure:2278: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2361,7 +2306,7 @@ fi
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:2365: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
echo "configure:2310: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2372,12 +2317,12 @@ cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext << EOF
#line 2376 "configure"
#line 2321 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
if { (eval echo configure:2381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:2326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
@@ -2403,12 +2348,12 @@ if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:2407: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "configure:2352: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:2412: checking whether we are using GNU C" >&5
echo "configure:2357: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2417,7 +2362,7 @@ else
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2421: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2366: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
@@ -2436,7 +2381,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:2440: checking whether ${CC-cc} accepts -g" >&5
echo "configure:2385: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2472,7 +2417,7 @@ if test "$RTEMS_CPU" = "unix" ; then
echo $ac_n "checking whether $RTEMS_HOST supports System V semaphores""... $ac_c" 1>&6
echo "configure:2476: checking whether $RTEMS_HOST supports System V semaphores" >&5
echo "configure:2421: checking whether $RTEMS_HOST supports System V semaphores" >&5
if eval "test \"`echo '$''{'rtems_cv_sysv_sem'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2481,7 +2426,7 @@ if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
#line 2485 "configure"
#line 2430 "configure"
#include "confdefs.h"
#include <sys/types.h>
@@ -2507,7 +2452,7 @@ int main () {
}
EOF
if { (eval echo configure:2511: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
if { (eval echo configure:2456: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
rtems_cv_sysv_sem="yes"
else
@@ -2530,7 +2475,7 @@ echo "$ac_t""$rtems_cv_sysv_sem" 1>&6
echo $ac_n "checking whether $RTEMS_HOST supports System V shared memory""... $ac_c" 1>&6
echo "configure:2534: checking whether $RTEMS_HOST supports System V shared memory" >&5
echo "configure:2479: checking whether $RTEMS_HOST supports System V shared memory" >&5
if eval "test \"`echo '$''{'rtems_cv_sysv_shm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2539,7 +2484,7 @@ if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
#line 2543 "configure"
#line 2488 "configure"
#include "confdefs.h"
#include <sys/types.h>
@@ -2555,7 +2500,7 @@ int main () {
}
EOF
if { (eval echo configure:2559: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
if { (eval echo configure:2504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
rtems_cv_sysv_shm="yes"
else
@@ -2578,7 +2523,7 @@ echo "$ac_t""$rtems_cv_sysv_shm" 1>&6
echo $ac_n "checking whether $RTEMS_HOST supports System V messages""... $ac_c" 1>&6
echo "configure:2582: checking whether $RTEMS_HOST supports System V messages" >&5
echo "configure:2527: checking whether $RTEMS_HOST supports System V messages" >&5
if eval "test \"`echo '$''{'rtems_cv_sysv_msg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2587,7 +2532,7 @@ if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
#line 2591 "configure"
#line 2536 "configure"
#include "confdefs.h"
#include <sys/types.h>
@@ -2603,7 +2548,7 @@ int main () {
}
EOF
if { (eval echo configure:2607: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
if { (eval echo configure:2552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
rtems_cv_sysv_msg="yes"
else
@@ -2634,7 +2579,7 @@ makefiles="$makefiles libbsp/bare/Makefile"
fi
echo $ac_n "checking for make/custom/$RTEMS_BSP.cfg""... $ac_c" 1>&6
echo "configure:2638: checking for make/custom/$RTEMS_BSP.cfg" >&5
echo "configure:2583: checking for make/custom/$RTEMS_BSP.cfg" >&5
if test -r "$srcdir/$RTEMS_TOPdir/make/custom/$RTEMS_BSP.cfg"; then
echo "$ac_t""yes" 1>&6
else
@@ -2642,7 +2587,7 @@ else
fi
echo $ac_n "checking whether BSP supports multiprocessing""... $ac_c" 1>&6
echo "configure:2646: checking whether BSP supports multiprocessing" >&5
echo "configure:2591: checking whether BSP supports multiprocessing" >&5
if eval "test \"`echo '$''{'rtems_cv_HAS_MP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2655,7 +2600,6 @@ else
else
rtems_cv_HAS_MP="no";
fi
fi
echo "$ac_t""$rtems_cv_HAS_MP" 1>&6
@@ -2666,6 +2610,34 @@ HAS_MP="no"
fi
if eval "test \"`echo '$''{'rtems_cv_HAS_CPLUSPLUS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$RTEMS_HAS_CPLUSPLUS" = "yes"; then
if test -n "$CXX_FOR_TARGET"; then
rtems_cv_HAS_CPLUSPLUS="yes";
else
rtems_cv_HAS_CPLUSPLUS="no";
fi
else
rtems_cv_HAS_CPLUSPLUS="no";
fi
fi
HAS_CPLUSPLUS="$rtems_cv_HAS_CPLUSPLUS";
if eval "test \"`echo '$''{'rtems_cv_HAS_NETWORKING'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$RTEMS_HAS_NETWORKING" = "yes"; then
rtems_cv_HAS_NETWORKING="yes";
else
rtems_cv_HAS_NETWORKING="no";
fi
fi
HAS_NETWORKING="$rtems_cv_HAS_NETWORKING";
# account for "aliased" bsps which share source code
@@ -2706,7 +2678,7 @@ fi
if test -d "$srcdir/libbsp/$bspcpudir$bspdir"; then
echo $ac_n "checking for Makefile.in in libbsp/${bspcpudir}$bspdir""... $ac_c" 1>&6
echo "configure:2710: checking for Makefile.in in libbsp/${bspcpudir}$bspdir" >&5
echo "configure:2682: checking for Makefile.in in libbsp/${bspcpudir}$bspdir" >&5
if test -d $srcdir/libbsp/${bspcpudir}$bspdir; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -2721,7 +2693,7 @@ fi
echo $ac_n "checking for Makefile.in in libbsp/${bspcpudir}shared""... $ac_c" 1>&6
echo "configure:2725: checking for Makefile.in in libbsp/${bspcpudir}shared" >&5
echo "configure:2697: checking for Makefile.in in libbsp/${bspcpudir}shared" >&5
if test -d $srcdir/libbsp/${bspcpudir}shared; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -2745,6 +2717,10 @@ else
{ echo "configure: error: unable to find libbsp directory ($bspdir) for ${RTEMS_BSP}" 1>&2; exit 1; }
fi
if test "$HAS_MP" = "yes"; then
makefiles="$makefiles libbsp/shmdr/Makefile"
fi
if test "$RTEMS_CPU" = "unix"; then
@@ -2757,7 +2733,7 @@ fi
# find all the CPU dependent library Makefiles
echo $ac_n "checking for Makefile.in in libcpu/$RTEMS_CPU""... $ac_c" 1>&6
echo "configure:2761: checking for Makefile.in in libcpu/$RTEMS_CPU" >&5
echo "configure:2737: checking for Makefile.in in libcpu/$RTEMS_CPU" >&5
if test -d $srcdir/libcpu/$RTEMS_CPU; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -2777,7 +2753,7 @@ case "${target}" in
*)
echo $ac_n "checking for Makefile.in in start/$RTEMS_CPU""... $ac_c" 1>&6
echo "configure:2781: checking for Makefile.in in start/$RTEMS_CPU" >&5
echo "configure:2757: checking for Makefile.in in start/$RTEMS_CPU" >&5
if test -d $srcdir/start/$RTEMS_CPU; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -2793,25 +2769,14 @@ fi
;;
esac
# If RTEMS macros are enabled, then use them. Otherwise, use inlines.
if test "$RTEMS_USE_MACROS" = "yes"; then
inline_dir=macros
if test "$RTEMS_HAS_POSIX_API" = "yes"; then
# The problem is that there is currently no code in posix/macros :)
{ echo "configure: error: Macros are not implemented for the POSIX API" 1>&2; exit 1; }
fi
else
inline_dir=inline
fi
# If the TCP/IP stack is enabled, then find all TCP/IP Makefiles
echo $ac_n "checking if networking is enabled? ""... $ac_c" 1>&6
echo "configure:2810: checking if networking is enabled? " >&5
echo "configure:2775: checking if networking is enabled? " >&5
echo "$ac_t""$RTEMS_HAS_NETWORKING" 1>&6
if test "$RTEMS_HAS_NETWORKING" = "yes"; then
echo $ac_n "checking for Makefile.in in libnetworking""... $ac_c" 1>&6
echo "configure:2815: checking for Makefile.in in libnetworking" >&5
echo "configure:2780: checking for Makefile.in in libnetworking" >&5
if test -d $srcdir/libnetworking; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -2826,7 +2791,7 @@ fi
echo $ac_n "checking for Makefile.in in librpc""... $ac_c" 1>&6
echo "configure:2830: checking for Makefile.in in librpc" >&5
echo "configure:2795: checking for Makefile.in in librpc" >&5
if test -d $srcdir/librpc; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -2842,7 +2807,7 @@ fi
if test "$RTEMS_HAS_RDBG" = "yes"; then
echo $ac_n "checking whether BSP supports librdbg""... $ac_c" 1>&6
echo "configure:2846: checking whether BSP supports librdbg" >&5
echo "configure:2811: checking whether BSP supports librdbg" >&5
if eval "test \"`echo '$''{'rtems_cv_HAS_RDBG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2864,7 +2829,7 @@ HAS_RDBG="$rtems_cv_HAS_RDBG"
# Extract the first word of "rpcgen", so it can be a program name with args.
set dummy rpcgen; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2868: checking for $ac_word" >&5
echo "configure:2833: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RPCGEN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2895,7 +2860,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2899: checking for $ac_word" >&5
echo "configure:2864: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2934,7 +2899,7 @@ done
if test "$HAS_RDBG" = "yes"; then
echo $ac_n "checking for Makefile.in in librdbg""... $ac_c" 1>&6
echo "configure:2938: checking for Makefile.in in librdbg" >&5
echo "configure:2903: checking for Makefile.in in librdbg" >&5
if test -d $srcdir/librdbg; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -2955,7 +2920,7 @@ fi
if test "$RTEMS_HAS_CPLUSPLUS" = "yes"; then
echo $ac_n "checking for Makefile.in in librtems++""... $ac_c" 1>&6
echo "configure:2959: checking for Makefile.in in librtems++" >&5
echo "configure:2924: checking for Makefile.in in librtems++" >&5
if test -d $srcdir/librtems++; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -2986,13 +2951,13 @@ fi
if test "$RTEMS_HAS_HWAPI" = "yes"; then
echo $ac_n "checking whether libwapi is present""... $ac_c" 1>&6
echo "configure:2990: checking whether libwapi is present" >&5
echo "configure:2955: checking whether libwapi is present" >&5
if test -f ${srcdir}/libhwapi/Makefile.in ; then
echo "$ac_t""yes" 1>&6
makefiles="$makefiles libhwapi/Makefile"
echo $ac_n "checking for Makefile.in in libhwapi/analog""... $ac_c" 1>&6
echo "configure:2996: checking for Makefile.in in libhwapi/analog" >&5
echo "configure:2961: checking for Makefile.in in libhwapi/analog" >&5
if test -d $srcdir/libhwapi/analog; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -3007,7 +2972,7 @@ fi
echo $ac_n "checking for Makefile.in in libhwapi/discrete""... $ac_c" 1>&6
echo "configure:3011: checking for Makefile.in in libhwapi/discrete" >&5
echo "configure:2976: checking for Makefile.in in libhwapi/discrete" >&5
if test -d $srcdir/libhwapi/discrete; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -3022,7 +2987,7 @@ fi
echo $ac_n "checking for Makefile.in in libhwapi/drivers""... $ac_c" 1>&6
echo "configure:3026: checking for Makefile.in in libhwapi/drivers" >&5
echo "configure:2991: checking for Makefile.in in libhwapi/drivers" >&5
if test -d $srcdir/libhwapi/drivers; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -3037,7 +3002,7 @@ fi
echo $ac_n "checking for Makefile.in in libhwapi/non_volatile_memory""... $ac_c" 1>&6
echo "configure:3041: checking for Makefile.in in libhwapi/non_volatile_memory" >&5
echo "configure:3006: checking for Makefile.in in libhwapi/non_volatile_memory" >&5
if test -d $srcdir/libhwapi/non_volatile_memory; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -3052,7 +3017,7 @@ fi
echo $ac_n "checking for Makefile.in in libhwapi/serial""... $ac_c" 1>&6
echo "configure:3056: checking for Makefile.in in libhwapi/serial" >&5
echo "configure:3021: checking for Makefile.in in libhwapi/serial" >&5
if test -d $srcdir/libhwapi/serial; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -3067,7 +3032,7 @@ fi
echo $ac_n "checking for Makefile.in in libhwapi/support""... $ac_c" 1>&6
echo "configure:3071: checking for Makefile.in in libhwapi/support" >&5
echo "configure:3036: checking for Makefile.in in libhwapi/support" >&5
if test -d $srcdir/libhwapi/support; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -3082,7 +3047,7 @@ fi
echo $ac_n "checking for Makefile.in in libhwapi/wrapup""... $ac_c" 1>&6
echo "configure:3086: checking for Makefile.in in libhwapi/wrapup" >&5
echo "configure:3051: checking for Makefile.in in libhwapi/wrapup" >&5
if test -d $srcdir/libhwapi/wrapup; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -3110,7 +3075,7 @@ fi
# pick up all the Makefiles in required parts of the tree
echo $ac_n "checking for Makefile.in in libchip""... $ac_c" 1>&6
echo "configure:3114: checking for Makefile.in in libchip" >&5
echo "configure:3079: checking for Makefile.in in libchip" >&5
if test -d $srcdir/libchip; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -3125,7 +3090,7 @@ fi
echo $ac_n "checking for Makefile.in in libmisc""... $ac_c" 1>&6
echo "configure:3129: checking for Makefile.in in libmisc" >&5
echo "configure:3094: checking for Makefile.in in libmisc" >&5
if test -d $srcdir/libmisc; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
@@ -3262,7 +3227,6 @@ ac_given_INSTALL="$INSTALL"
trap 'rm -fr `echo "Makefile
include/Makefile
libbsp/Makefile
libbsp/shmdr/Makefile
libc/Makefile
libcpu/Makefile
start/Makefile
@@ -3321,10 +3285,8 @@ s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
s%@RTEMS_HAS_MULTIPROCESSING@%$RTEMS_HAS_MULTIPROCESSING%g
s%@RTEMS_HAS_POSIX_API@%$RTEMS_HAS_POSIX_API%g
s%@RTEMS_HAS_NETWORKING@%$RTEMS_HAS_NETWORKING%g
s%@RTEMS_HAS_RDBG@%$RTEMS_HAS_RDBG%g
s%@RTEMS_USE_MACROS@%$RTEMS_USE_MACROS%g
s%@RTEMS_LIBC_DIR@%$RTEMS_LIBC_DIR%g
s%@RTEMS_HAS_HWAPI@%$RTEMS_HAS_HWAPI%g
s%@RTEMS_BSP@%$RTEMS_BSP%g
@@ -3352,6 +3314,8 @@ s%@RTEMS_GAS_CODE16_TRUE@%$RTEMS_GAS_CODE16_TRUE%g
s%@RTEMS_GAS_CODE16_FALSE@%$RTEMS_GAS_CODE16_FALSE%g
s%@CC@%$CC%g
s%@HAS_MP@%$HAS_MP%g
s%@HAS_CPLUSPLUS@%$HAS_CPLUSPLUS%g
s%@HAS_NETWORKING@%$HAS_NETWORKING%g
s%@RTEMS_LIBBSP_CPU_SUBDIR@%$RTEMS_LIBBSP_CPU_SUBDIR%g
s%@UNIX_TRUE@%$UNIX_TRUE%g
s%@UNIX_FALSE@%$UNIX_FALSE%g
@@ -3409,7 +3373,6 @@ cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile
include/Makefile
libbsp/Makefile
libbsp/shmdr/Makefile
libc/Makefile
libcpu/Makefile
start/Makefile

20
c/src/lib/configure.in
View File

@@ -13,10 +13,8 @@ RTEMS_CANONICAL_TARGET_CPU
AM_MAINTAINER_MODE
RTEMS_ENABLE_MULTIPROCESSING
RTEMS_ENABLE_POSIX
RTEMS_ENABLE_NETWORKING
RTEMS_ENABLE_RDBG
RTEMS_ENABLE_INLINES
RTEMS_ENABLE_CXX
RTEMS_ENABLE_GCC28
RTEMS_ENABLE_LIBCDIR
@@ -57,6 +55,8 @@ fi
RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP)
RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP)
RTEMS_CHECK_CXX(RTEMS_BSP)
RTEMS_CHECK_NETWORKING(RTEMS_BSP)
RTEMS_BSP_ALIAS(${RTEMS_BSP},bspdir)
@@ -98,6 +98,10 @@ else
AC_MSG_ERROR([unable to find libbsp directory ($bspdir) for ${RTEMS_BSP}])
fi
if test "$HAS_MP" = "yes"; then
makefiles="$makefiles libbsp/shmdr/Makefile"
fi
AM_CONDITIONAL(UNIX,test "$RTEMS_CPU" = "unix")
# find all the CPU dependent library Makefiles
RTEMS_CHECK_MAKEFILE(libcpu/$RTEMS_CPU)
@@ -113,17 +117,6 @@ changequote([,])dnl
;;
esac
# If RTEMS macros are enabled, then use them. Otherwise, use inlines.
if test "$RTEMS_USE_MACROS" = "yes"; then
inline_dir=macros
if test "$RTEMS_HAS_POSIX_API" = "yes"; then
# The problem is that there is currently no code in posix/macros :)
AC_MSG_ERROR(Macros are not implemented for the POSIX API)
fi
else
inline_dir=inline
fi
# If the TCP/IP stack is enabled, then find all TCP/IP Makefiles
AC_MSG_CHECKING([if networking is enabled? ])
AC_MSG_RESULT($RTEMS_HAS_NETWORKING)
@@ -195,7 +188,6 @@ AC_OUTPUT(
Makefile
include/Makefile
libbsp/Makefile
libbsp/shmdr/Makefile
libc/Makefile
libcpu/Makefile
start/Makefile

13
c/src/lib/include/Makefile.in
View File

@@ -17,10 +17,9 @@ include $(RTEMS_ROOT)/make/leaf.cfg
INSTALL_CHANGE = @INSTALL_CHANGE@
mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
INSTALLDIRS = $(PROJECT_INCLUDE)/sys $(PROJECT_INCLUDE)/motorola \
$(PROJECT_INCLUDE)/zilog $(LIBRPCdir) $(LIBRDBGdir) \
$(LIBRTEMSCPLUSPLUSdir) $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/rtems++ \
$(PROJECT_INCLUDE)/rpc $(PROJECT_INCLUDE)/rdbg
INSTALLDIRS = $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/sys \
$(PROJECT_INCLUDE)/motorola $(PROJECT_INCLUDE)/zilog $(LIBRPCdir) \
$(LIBRDBGdir) $(LIBRTEMSCPLUSPLUSdir)
$(INSTALLDIRS):
@$(mkinstalldirs) $(INSTALLDIRS)
@@ -80,13 +79,13 @@ preinstall: $(INSTALLDIRS) $(SRCS)
@$(INSTALL_CHANGE) -m 644 $(MOTOROLA_H_FILES) $(PROJECT_INCLUDE)/motorola
@$(INSTALL_CHANGE) -m 644 $(ZILOG_H_FILES) $(PROJECT_INCLUDE)/zilog
@if test "$(HAS_CPLUSPLUS)" = "yes"; then \
$(INSTALL_CHANGE) -m 644 $(RTEMSCPLUSPLUS_H_FILES) $(PROJECT_INCLUDE)/rtems++; \
$(INSTALL_CHANGE) -m 644 $(RTEMSCPLUSPLUS_H_FILES) $(LIBRTEMSCPLUSPLUSdir); \
fi
@if test "$(HAS_NETWORKING)" = "yes"; then \
$(INSTALL_CHANGE) -m 644 $(RPC_H_FILES) $(PROJECT_INCLUDE)/rpc; \
$(INSTALL_CHANGE) -m 644 $(RPC_H_FILES) $(LIBRPCdir); \
fi
@if test "$(HAS_RDBG)" = "yes"; then \
$(INSTALL_CHANGE) -m 644 $(RDBG_H_FILES) $(PROJECT_INCLUDE)/rdbg; \
$(INSTALL_CHANGE) -m 644 $(RDBG_H_FILES) $(LIBRDBGdir); \
fi
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

2
c/src/lib/libbsp/bare/include/Makefile.in
View File

@@ -13,7 +13,7 @@ PROJECT_ROOT = @PROJECT_ROOT@
VPATH = @srcdir@
H_FILES = $(srcdir)/bsp.h
H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h
#
# Equate files are for including from assembly preprocessed by

2
c/src/lib/libbsp/i386/force386/startup/Makefile.in
View File

@@ -67,7 +67,7 @@ CLOBBER_ADDITIONS +=
${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/i386/i386ex/startup/Makefile.in
View File

@@ -72,7 +72,7 @@ CLOBBER_ADDITIONS +=
${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
install: all

2
c/src/lib/libbsp/i386/pc386/bsp_specs
View File

@@ -19,7 +19,7 @@ crtend.o%s crtn.o%s
*startfile:
%{!qrtems: %(old_startfile)} %{qrtems: \
%{!qrtems_debug: start.o%s crti.o%s crtbegin.o%s} \
%{qrtems_debug: start_g.o%s}}
%{qrtems_debug: start_g.o%s crti.o%s crtbegin.o%s}}
*link:
%{!qrtems: %(old_link)} %{qrtems: -dc -dp -N -e start}

2
c/src/lib/libbsp/i386/pc386/startup/Makefile.in
View File

@@ -70,7 +70,7 @@ CLOBBER_ADDITIONS +=
${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/i386/ts_386ex/startup/Makefile.in
View File

@@ -72,7 +72,7 @@ CLOBBER_ADDITIONS +=
${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
@$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
@$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
install: all

2
c/src/lib/libbsp/i960/cvme961/startup/Makefile.in
View File

@@ -63,7 +63,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
install: all

2
c/src/lib/libbsp/m68k/dmv152/startup/Makefile.in
View File

@@ -63,7 +63,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \

6
c/src/lib/libbsp/m68k/efi332/startup/Makefile.in
View File

@@ -68,9 +68,9 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) $(srcdir)/linkcmds_ROM $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) ${ARCH}/except_vect_332_ROM.o $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds_ROM $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 ${ARCH}/except_vect_332_ROM.o $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/m68k/efi68k/startup/Makefile.in
View File

@@ -63,7 +63,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/m68k/gen68302/startup/Makefile.in
View File

@@ -63,7 +63,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/m68k/gen68340/startup/Makefile.in
View File

@@ -63,7 +63,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/m68k/gen68360/startup/Makefile.in
View File

@@ -64,7 +64,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(srcdir)/linkcmds.prom $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(srcdir)/linkcmds.prom $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/m68k/idp/startup/Makefile.in
View File

@@ -63,7 +63,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/m68k/mvme136/startup/Makefile.in
View File

@@ -63,7 +63,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/m68k/mvme147/startup/Makefile.in
View File

@@ -63,7 +63,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/m68k/mvme147s/startup/Makefile.in
View File

@@ -64,7 +64,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/m68k/mvme162/startup/Makefile.in
View File

@@ -63,7 +63,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

4
c/src/lib/libbsp/m68k/mvme167/startup/Makefile.in
View File

@@ -65,8 +65,8 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) $(srcdir)/elflinkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m644 $(srcdir)/elflinkcmds $(PROJECT_RELEASE)/lib
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \

2
c/src/lib/libbsp/m68k/ods68302/startup/Makefile.in
View File

@@ -68,7 +68,7 @@ $(srcdir)/rom:
$(srcdir)/debugger:
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(srcdir)/rom $(srcdir)/debugger $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(srcdir)/rom $(srcdir)/debugger $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/mips64orion/p4000/startup/Makefile.in
View File

@@ -68,7 +68,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/ghlinkcmds $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/ghlinkcmds $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/no_cpu/no_bsp/startup/Makefile.in
View File

@@ -71,7 +71,7 @@ all: ${ARCH} $(SRCS) $(PGM)
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
install: all
$(INSTALL_CHANGE) linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 linkcmds $(PROJECT_RELEASE)/lib
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \

2
c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in
View File

@@ -68,7 +68,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \

2
c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in
View File

@@ -68,7 +68,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
install: all

2
c/src/lib/libbsp/powerpc/helas403/startup/Makefile.in
View File

@@ -63,7 +63,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
install: all

2
c/src/lib/libbsp/powerpc/mcp750/startup/Makefile.in
View File

@@ -64,7 +64,7 @@ CLOBBER_ADDITIONS +=
all: ${ARCH} $(SRCS) $(OBJS)
$(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(PROJECT_RELEASE)/lib/libbsp.a:
cd ../wrapup; $(MAKE) $(AM_MAKEFLAGS)

2
c/src/lib/libbsp/powerpc/motorola_powerpc/startup/Makefile.in
View File

@@ -64,7 +64,7 @@ CLOBBER_ADDITIONS +=
all: ${ARCH} $(SRCS) $(OBJS)
$(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(PROJECT_RELEASE)/lib/libbsp.a:
cd ../wrapup; $(MAKE) $(AM_MAKEFLAGS)

2
c/src/lib/libbsp/powerpc/papyrus/startup/Makefile.in
View File

@@ -63,7 +63,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
install: all

2
c/src/lib/libbsp/powerpc/ppcn_60x/startup/Makefile.in
View File

@@ -72,7 +72,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \

4
c/src/lib/libbsp/powerpc/psim/startup/Makefile.in
View File

@@ -68,8 +68,8 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) $(srcdir)/device-tree $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/device-tree $(PROJECT_RELEASE)/lib
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \

2
c/src/lib/libbsp/sh/gensh1/start/Makefile.in
View File

@@ -63,7 +63,7 @@ CLEAN_ADDITIONS +=
CLOBBER_ADDITIONS +=
all: ${ARCH} $(SRCS) $(OBJS) $(PGM)
$(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib
@$(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \

2
c/src/lib/libbsp/sh/gensh1/startup/Makefile.in
View File

@@ -68,7 +68,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile

2
c/src/lib/libbsp/sparc/erc32/startup/Makefile.in
View File

@@ -70,7 +70,7 @@ ${PGM}: ${SRCS} ${OBJS}
$(make-rel)
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \

2
c/src/lib/libmisc/wrapup/Makefile.in
View File

@@ -44,7 +44,7 @@ $(LIB): ${LIBS} $(RELS)
$(RANLIB) $@
all: ${ARCH} $(SRCS) $(LIB)
$(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib
@$(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \

2
c/src/lib/start/sh/Makefile.in
View File

@@ -63,7 +63,7 @@ CLEAN_ADDITIONS +=
CLOBBER_ADDITIONS +=
all: ${ARCH} $(SRCS) $(OBJS) $(PGM)
$(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib
@$(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \

2
c/src/libmisc/wrapup/Makefile.in
View File

@@ -44,7 +44,7 @@ $(LIB): ${LIBS} $(RELS)
$(RANLIB) $@
all: ${ARCH} $(SRCS) $(LIB)
$(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib
@$(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \

5
c/src/make/Makefile.am
View File

@@ -34,11 +34,6 @@ if MAINTAINER_MODE
$(srcdir)/main.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/main.cfg
sed -e 's%\$$(RTEMS_BSP)%\@RTEMS_BSP\@%g' < $< >$@
$(srcdir)/Makefile.inc.in: $(top_srcdir)/@RTEMS_TOPdir@/make/Templates/Makefile.inc.in
echo "RTEMS_BSP = @""RTEMS_BSP@" > $@
echo "" >> $@
cat $< >> $@
$(srcdir)/host.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/host.cfg.in
cp $< $@

8
c/src/make/Makefile.in
View File

@@ -87,7 +87,10 @@ CXX = @CXX@
CXXCPP = @CXXCPP@
CXX_FOR_TARGET = @CXX_FOR_TARGET@
GCCSED = @GCCSED@
HAS_CPLUSPLUS = @HAS_CPLUSPLUS@
HAS_MP = @HAS_MP@
HAS_NETWORKING = @HAS_NETWORKING@
HAS_POSIX_API = @HAS_POSIX_API@
HAS_RDBG = @HAS_RDBG@
INSTALL_CHANGE = @INSTALL_CHANGE@
KSH = @KSH@
@@ -481,11 +484,6 @@ maintainer-clean-generic clean mostlyclean distclean maintainer-clean
@MAINTAINER_MODE_TRUE@$(srcdir)/main.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/main.cfg
@MAINTAINER_MODE_TRUE@ sed -e 's%\$$(RTEMS_BSP)%\@RTEMS_BSP\@%g' < $< >$@
@MAINTAINER_MODE_TRUE@$(srcdir)/Makefile.inc.in: $(top_srcdir)/@RTEMS_TOPdir@/make/Templates/Makefile.inc.in
@MAINTAINER_MODE_TRUE@ echo "RTEMS_BSP = @""RTEMS_BSP@" > $@
@MAINTAINER_MODE_TRUE@ echo "" >> $@
@MAINTAINER_MODE_TRUE@ cat $< >> $@
@MAINTAINER_MODE_TRUE@$(srcdir)/host.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/host.cfg.in
@MAINTAINER_MODE_TRUE@ cp $< $@

19
c/src/make/Makefile.inc.in
View File

@@ -1,19 +1,16 @@
RTEMS_BSP = @RTEMS_BSP@
#
#
# Target specific settings. To be included in application Makefiles.
# BSP specific settings. To be included in application Makefiles
#
prefix = @prefix@
CC_FOR_TARGET = @program_prefix@gcc
AS_FOR_TARGET = @program_prefix@as
AR_FOR_TARGET = @program_prefix@ar
NM_FOR_TARGET = @program_prefix@nm
LD_FOR_TARGET = @program_prefix@ld
SIZE_FOR_TARGET = @program_prefix@size
OBJCOPY_FOR_TARGET = @program_prefix@objcopy
CC_FOR_TARGET = @CC_FOR_TARGET@
AS_FOR_TARGET = @AS_FOR_TARGET@
AR_FOR_TARGET = @AR_FOR_TARGET@
NM_FOR_TARGET = @NM_FOR_TARGET@
LD_FOR_TARGET = @LD_FOR_TARGET@
SIZE_FOR_TARGET = @SIZE_FOR_TARGET@
OBJCOPY_FOR_TARGET = @OBJCOPY_FOR_TARGET@
CC= $(CC_FOR_TARGET)
AS= $(AS_FOR_TARGET)

3
c/src/make/Templates/Makefile.in
View File

@@ -86,7 +86,10 @@ CXX = @CXX@
CXXCPP = @CXXCPP@
CXX_FOR_TARGET = @CXX_FOR_TARGET@
GCCSED = @GCCSED@
HAS_CPLUSPLUS = @HAS_CPLUSPLUS@
HAS_MP = @HAS_MP@
HAS_NETWORKING = @HAS_NETWORKING@
HAS_POSIX_API = @HAS_POSIX_API@
HAS_RDBG = @HAS_RDBG@
INSTALL_CHANGE = @INSTALL_CHANGE@
KSH = @KSH@

74
c/src/make/aclocal.m4 vendored
View File

@@ -937,7 +937,9 @@ else
fi
])dnl
dnl
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_MULTIPROCESSING,
[dnl
@@ -954,8 +956,7 @@ AC_CACHE_CHECK([whether BSP supports multiprocessing],
fi
else
rtems_cv_HAS_MP="no";
fi
])
fi])
if test "$rtems_cv_HAS_MP" = "yes"; then
HAS_MP="yes"
else
@@ -964,6 +965,8 @@ fi
AC_SUBST(HAS_MP)
])
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_RDBG,
[dnl
AC_REQUIRE([RTEMS_TOP])dnl
@@ -981,3 +984,70 @@ HAS_RDBG="$rtems_cv_HAS_RDBG"
AC_SUBST(HAS_RDBG)
])
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_POSIX_API,
[dnl
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
AC_CACHE_CHECK([whether BSP supports libposix],
rtems_cv_HAS_POSIX_API,
[dnl
case "$RTEMS_CPU" in
unix*)
rtems_cv_HAS_POSIX_API="no"
;;
*)
if test "${RTEMS_HAS_POSIX_API}" = "yes"; then
rtems_cv_HAS_POSIX_API="yes";
else
rtems_cv_HAS_POSIX_API="disabled";
fi
;;
esac])
if test "$rtems_cv_HAS_POSIX_API" = "yes"; then
HAS_POSIX_API="yes";
else
HAS_POSIX_API="no";
fi
AC_SUBST(HAS_POSIX_API)dnl
])
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_CXX,
[dnl
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
AC_REQUIRE([RTEMS_PROG_CXX_FOR_TARGET])dnl
AC_CACHE_VAL(rtems_cv_HAS_CPLUSPLUS,
[dnl
if test "$RTEMS_HAS_CPLUSPLUS" = "yes"; then
if test -n "$CXX_FOR_TARGET"; then
rtems_cv_HAS_CPLUSPLUS="yes";
else
rtems_cv_HAS_CPLUSPLUS="no";
fi
else
rtems_cv_HAS_CPLUSPLUS="no";
fi
])dnl
HAS_CPLUSPLUS="$rtems_cv_HAS_CPLUSPLUS";
AC_SUBST(HAS_CPLUSPLUS)dnl
])
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_NETWORKING,
[dnl
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
AC_CACHE_VAL(rtems_cv_HAS_NETWORKING,
[dnl
if test "$RTEMS_HAS_NETWORKING" = "yes"; then
rtems_cv_HAS_NETWORKING="yes";
else
rtems_cv_HAS_NETWORKING="no";
fi
])dnl
HAS_NETWORKING="$rtems_cv_HAS_NETWORKING";
AC_SUBST(HAS_NETWORKING)dnl
])

17
c/src/make/bsp.cfg.in
View File

@@ -1,3 +1,5 @@
## BSP configuration flags for BSP "@RTEMS_BSP@"
##
## Does this BSP support multiprocessing ?
##
@@ -7,3 +9,18 @@ HAS_MP = @HAS_MP@
## Does this BSP support RTEMS's remote debugger ?
##
HAS_RDBG = @HAS_RDBG@
##
## Does this BSP support RTEMS's posix API ?
##
HAS_POSIX_API = @HAS_POSIX_API@
##
## Does this BSP support RTEMS's CXX API ?
##
HAS_CPLUSPLUS = @HAS_CPLUSPLUS@
##
## Does this BSP support RTEMS's networking ?
##
HAS_NETWORKING = @HAS_NETWORKING@

3
c/src/make/compilers/Makefile.in
View File

@@ -86,7 +86,10 @@ CXX = @CXX@
CXXCPP = @CXXCPP@
CXX_FOR_TARGET = @CXX_FOR_TARGET@
GCCSED = @GCCSED@
HAS_CPLUSPLUS = @HAS_CPLUSPLUS@
HAS_MP = @HAS_MP@
HAS_NETWORKING = @HAS_NETWORKING@
HAS_POSIX_API = @HAS_POSIX_API@
HAS_RDBG = @HAS_RDBG@
INSTALL_CHANGE = @INSTALL_CHANGE@
KSH = @KSH@

7
c/src/make/compilers/gcc-target-default.cfg
View File

@@ -87,10 +87,7 @@ endif
# Define this to yes if C++ is included in the development environment.
# This requires that at least the GNU C++ compiler and libg++ be installed.
ifeq ($(RTEMS_HAS_CPLUSPLUS),yes)
HAS_CPLUSPLUS=yes
CPLUS_LD_LIBS += $(PROJECT_RELEASE)/lib/librtems++$(LIBSUFFIX_VA)
else
HAS_CPLUSPLUS=no
endif
# debug flag;
@@ -287,15 +284,13 @@ endif
LINK_OBJS =\
$(CONSTRUCTOR) \
$(OBJS) \
$(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel) \
$(PROJECT_RELEASE)/lib/libtest$(LIBSUFFIX_VA)
$(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
LINK_FILES =\
$(START_FILE) \
$(CONSTRUCTOR) \
$(OBJS) \
$(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel) \
$(PROJECT_RELEASE)/lib/libtest$(LIBSUFFIX_VA) \
$(PROJECT_RELEASE)/lib/librtemsall$(LIBSUFFIX_VA)
ifeq ($(RTEMS_USE_GCC272),yes)

60
c/src/make/configure vendored
View File

@@ -2943,7 +2943,6 @@ else
else
rtems_cv_HAS_MP="no";
fi
fi
echo "$ac_t""$rtems_cv_HAS_MP" 1>&6
@@ -2955,7 +2954,7 @@ fi
echo $ac_n "checking whether BSP supports librdbg""... $ac_c" 1>&6
echo "configure:2959: checking whether BSP supports librdbg" >&5
echo "configure:2958: checking whether BSP supports librdbg" >&5
if eval "test \"`echo '$''{'rtems_cv_HAS_RDBG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2972,6 +2971,60 @@ echo "$ac_t""$rtems_cv_HAS_RDBG" 1>&6
HAS_RDBG="$rtems_cv_HAS_RDBG"
echo $ac_n "checking whether BSP supports libposix""... $ac_c" 1>&6
echo "configure:2976: checking whether BSP supports libposix" >&5
if eval "test \"`echo '$''{'rtems_cv_HAS_POSIX_API'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$RTEMS_CPU" in
unix*)
rtems_cv_HAS_POSIX_API="no"
;;
*)
if test "${RTEMS_HAS_POSIX_API}" = "yes"; then
rtems_cv_HAS_POSIX_API="yes";
else
rtems_cv_HAS_POSIX_API="disabled";
fi
;;
esac
fi
echo "$ac_t""$rtems_cv_HAS_POSIX_API" 1>&6
if test "$rtems_cv_HAS_POSIX_API" = "yes"; then
HAS_POSIX_API="yes";
else
HAS_POSIX_API="no";
fi
if eval "test \"`echo '$''{'rtems_cv_HAS_CPLUSPLUS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$RTEMS_HAS_CPLUSPLUS" = "yes"; then
if test -n "$CXX_FOR_TARGET"; then
rtems_cv_HAS_CPLUSPLUS="yes";
else
rtems_cv_HAS_CPLUSPLUS="no";
fi
else
rtems_cv_HAS_CPLUSPLUS="no";
fi
fi
HAS_CPLUSPLUS="$rtems_cv_HAS_CPLUSPLUS";
if eval "test \"`echo '$''{'rtems_cv_HAS_NETWORKING'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$RTEMS_HAS_NETWORKING" = "yes"; then
rtems_cv_HAS_NETWORKING="yes";
else
rtems_cv_HAS_NETWORKING="no";
fi
fi
HAS_NETWORKING="$rtems_cv_HAS_NETWORKING";
@@ -3243,6 +3296,9 @@ s%@STRIP_FOR_TARGET@%$STRIP_FOR_TARGET%g
s%@RTEMS_GAS_CODE16@%$RTEMS_GAS_CODE16%g
s%@HAS_MP@%$HAS_MP%g
s%@HAS_RDBG@%$HAS_RDBG%g
s%@HAS_POSIX_API@%$HAS_POSIX_API%g
s%@HAS_CPLUSPLUS@%$HAS_CPLUSPLUS%g
s%@HAS_NETWORKING@%$HAS_NETWORKING%g
s%@rtems_cv_prog_cc_cross@%$rtems_cv_prog_cc_cross%g
s%@RTEMS_HAS_CPLUSPLUS@%$RTEMS_HAS_CPLUSPLUS%g
s%@RTEMS_USE_GCC272@%$RTEMS_USE_GCC272%g

3
c/src/make/configure.in
View File

@@ -73,6 +73,9 @@ RTEMS_I386_GAS_CODE16
RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP)
RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP)
RTEMS_CHECK_RDBG(RTEMS_BSP)
RTEMS_CHECK_POSIX_API(RTEMS_BSP)
RTEMS_CHECK_CXX(RTEMS_BSP)
RTEMS_CHECK_NETWORKING(RTEMS_BSP)
AC_SUBST(rtems_cv_prog_cc_cross)
AC_SUBST(RTEMS_HAS_CPLUSPLUS)

3
c/src/make/custom/Makefile.in
View File

@@ -86,7 +86,10 @@ CXX = @CXX@
CXXCPP = @CXXCPP@
CXX_FOR_TARGET = @CXX_FOR_TARGET@
GCCSED = @GCCSED@
HAS_CPLUSPLUS = @HAS_CPLUSPLUS@
HAS_MP = @HAS_MP@
HAS_NETWORKING = @HAS_NETWORKING@
HAS_POSIX_API = @HAS_POSIX_API@
HAS_RDBG = @HAS_RDBG@
INSTALL_CHANGE = @INSTALL_CHANGE@
KSH = @KSH@

28
c/src/make/custom/default.cfg.in
View File

@@ -40,34 +40,6 @@ CONFIG.$(TARGET_ARCH).CC = $(RTEMS_ROOT)/make/compilers/gcc-target-default.cfg
## GCC specs extension file location
RTEMS_BSP_SPECS = $(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs
## LIBC support
## Specify the one you want here and fill in the blanks.
## Currently CYGNUS newlib is supported.
## NOTE: RTEMS libcsupport.a includes RTEMS versions of stuff like
## malloc, gettimeofday, etc.
# Define this to yes if C++ is included in the development environment.
# This requires that at least the GNU C++ compiler and libg++ be installed.
ifeq ($(RTEMS_HAS_CPLUSPLUS),yes)
HAS_CPLUSPLUS=yes
else
HAS_CPLUSPLUS=no
endif
# Define this to yes if this target wants the TCP/IP stack
ifeq ($(RTEMS_HAS_NETWORKING),yes)
HAS_NETWORKING=yes
else
HAS_NETWORKING=no
endif
# Define this to yes if this target wants the posix api
ifeq ($(RTEMS_HAS_POSIX_API),yes)
HAS_POSIX_API=yes
else
HAS_POSIX_API=no
endif
# Base name of start file
START_BASE=start

5
c/src/make/host.cfg.in
View File

@@ -47,11 +47,6 @@ GCCSED = @GCCSED@
# reliable but late model ksh's are usually OK.
KSH=@KSH@
#
# RCS support
#
RCS_CLEAN=$(PROJECT_BIN)/rcs-clean
#
# Rule to install a shell script with the proper shell to run it.
#

427
c/src/tests/Makefile.in
View File

@@ -1,53 +1,408 @@
# Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
#
# $Id$
# $Id$
#
@SET_MAKE@
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
VPATH = @srcdir@
include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
include $(RTEMS_ROOT)/make/directory.cfg
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@
BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
BARE_CPU_MODEL = @BARE_CPU_MODEL@
CC = @CC@
CC_FOR_TARGET = @CC_FOR_TARGET@
CPP = @CPP@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXX_FOR_TARGET = @CXX_FOR_TARGET@
GCCSED = @GCCSED@
HAS_MP = @HAS_MP@
HAS_POSIX_API = @HAS_POSIX_API@
INSTALL_CHANGE = @INSTALL_CHANGE@
mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
PACKAGE = @PACKAGE@
PACKHEX = @PACKHEX@
PROJECT_ROOT = @PROJECT_ROOT@
RTEMS_BSP = @RTEMS_BSP@
RTEMS_CPU = @RTEMS_CPU@
RTEMS_HAS_MULTIPROCESSING = @RTEMS_HAS_MULTIPROCESSING@
RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
RTEMS_HAS_POSIX_API = @RTEMS_HAS_POSIX_API@
RTEMS_HOST = @RTEMS_HOST@
RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
RTEMS_ROOT = @RTEMS_ROOT@
RTEMS_TOPdir = @RTEMS_TOPdir@
RTEMS_USE_MACROS = @RTEMS_USE_MACROS@
VERSION = @VERSION@
INSTALLDIRS = $(PROJECT_RELEASE)/tests/screens/sptests \
$(PROJECT_RELEASE)/tests/screens/mptests \
$(PROJECT_RELEASE)/tests/screens/psxtests \
$(PROJECT_RELEASE)/tests/screens/mptests/node1 \
$(PROJECT_RELEASE)/tests/screens/mptests/node2 \
$(PROJECT_RELEASE)/samples
AUTOMAKE_OPTIONS = foreign 1.4
ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
$(INSTALLDIRS):
@$(mkinstalldirs) $(INSTALLDIRS)
SUBDIRS = support @subdirs@
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/../../../mkinstalldirs
CONFIG_CLEAN_FILES =
DIST_COMMON = README Makefile.am Makefile.in aclocal.m4 configure \
configure.in
all: README
# mptests are the multiprocessing test suite
# We only build them if HAS_MP was defined
MP_TESTS_yes_V = mptests
MP_TESTS = $(MP_TESTS_$(HAS_MP)_V)
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
# psxtests are the POSIX API test suite
# We only build them if HAS_POSIX_API was defined
POSIX_TESTS_yes_V = psxtests
POSIX_TESTS = $(POSIX_TESTS_$(HAS_POSIX_API)_V)
TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../automake/subdirs.am $(top_srcdir)/../../../automake/local.am
cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
# wildcard on this lets ALL test suites be optional
SUB_DIRS = $(wildcard tools support samples libtests sptests $(MP_TESTS) \
$(POSIX_TESTS) tmtests)
preinstall: $(INSTALLDIRS)
CLOBBER_ADDITIONS += config.log config.cache
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
@SET_MAKE@
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
test "$$subdir" = "." && dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
mostlyclean-tags:
clean-tags:
distclean-tags:
-rm -f TAGS ID
maintainer-clean-tags:
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
-rm -rf $(distdir)
GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
dc_install_base=`cd $(distdir)/=inst && pwd`; \
cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) dist
-rm -rf $(distdir)
@banner="$(distdir).tar.gz is ready for distribution"; \
dashes=`echo "$$banner" | sed s/./=/g`; \
echo "$$dashes"; \
echo "$$banner"; \
echo "$$dashes"
dist: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
dist-all: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
distdir: $(DISTFILES)
-rm -rf $(distdir)
mkdir $(distdir)
-chmod 777 $(distdir)
here=`cd $(top_builddir) && pwd`; \
top_distdir=`cd $(distdir) && pwd`; \
distdir=`cd $(distdir) && pwd`; \
cd $(top_srcdir) \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
for subdir in $(SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am:
install-exec: install-exec-recursive
install-data-am:
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile
all-redirect: all-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-tags mostlyclean-generic
mostlyclean: mostlyclean-recursive
clean-am: clean-tags clean-generic mostlyclean-am
clean: clean-recursive
distclean-am: distclean-tags distclean-generic clean-am
distclean: distclean-recursive
-rm -f config.status
maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-recursive
-rm -f config.status
.PHONY: install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
depend-recursive \
preinstall-recursive \
debug-recursive \
profile-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
debug: debug-recursive
.PHONY: debug-recursive
profile: profile-recursive
.PHONY: profile-recursive
preinstall: preinstall-recursive
.PHONY: preinstall-recursive
depend: depend-recursive
.PHONY: depend-recursive
debug-am:
debug: debug-am
.PHONY: debug debug-am
profile-am:
profile: profile-am
.PHONY: profile profile-am
preinstall-am:
preinstall: preinstall-am
.PHONY: preinstall preinstall-am
depend-am:
depend: depend-am
.PHONY: depend depend-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

308
c/src/tests/aclocal.m4 vendored
View File

@@ -85,6 +85,98 @@ AC_SUBST(RTEMS_CPU)
AC_MSG_RESULT($RTEMS_CPU)
])
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
# serial 1
dnl Usage:
dnl AM_INIT_AUTOMAKE(package,version, [no-define])
AC_DEFUN(AM_INIT_AUTOMAKE,
[AC_REQUIRE([AC_PROG_INSTALL])
PACKAGE=[$1]
AC_SUBST(PACKAGE)
VERSION=[$2]
AC_SUBST(VERSION)
dnl test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
ifelse([$3],,
AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
AC_REQUIRE([AM_SANITY_CHECK])
AC_REQUIRE([AC_ARG_PROGRAM])
dnl FIXME This is truly gross.
missing_dir=`cd $ac_aux_dir && pwd`
AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
AC_REQUIRE([AC_PROG_MAKE_SET])])
#
# Check to make sure that the build environment is sane.
#
AC_DEFUN(AM_SANITY_CHECK,
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
if test "[$]*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
if test "[$]*" != "X $srcdir/configure conftestfile" \
&& test "[$]*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
test "[$]2" = conftestfile
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
rm -f conftest*
AC_MSG_RESULT(yes)])
dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
dnl The program must properly implement --version.
AC_DEFUN(AM_MISSING_PROG,
[AC_MSG_CHECKING(for working $2)
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if ($2 --version) < /dev/null > /dev/null 2>&1; then
$1=$2
AC_MSG_RESULT(found)
else
$1="$3/missing $2"
AC_MSG_RESULT(missing)
fi
AC_SUBST($1)])
# Add --enable-maintainer-mode option to configure.
# From Jim Meyering
@@ -186,20 +278,6 @@ AC_SUBST(RTEMS_HAS_NETWORKING)dnl
dnl $Id$
AC_DEFUN(RTEMS_ENABLE_RDBG,
[
AC_ARG_ENABLE(rdbg,
[ --enable-rdbg enable remote debugger],
[case "${enableval}" in
yes) RTEMS_HAS_RDBG=yes ;;
no) RTEMS_HAS_RDBG=no ;;
*) AC_MSG_ERROR(bad value ${enableval} for enable-rdbg option) ;;
esac],[RTEMS_HAS_RDBG=no])
AC_SUBST(RTEMS_HAS_RDBG)dnl
])
dnl $Id$
AC_DEFUN(RTEMS_ENABLE_INLINES,
[AC_ARG_ENABLE(rtems-inlines,
[ --enable-rtems-inlines enable RTEMS inline functions]
@@ -756,149 +834,6 @@ fi
])
dnl
dnl $Id$
dnl
dnl check for i386 gas supporting 16 bit mode
dnl - binutils 2.9.1.0.7 and higher
AC_DEFUN(RTEMS_I386_GAS_CODE16,
[ if test "${target_cpu}" = "i386"; then
AC_CACHE_CHECK([for 16 bit mode assembler support],
rtems_cv_prog_gas_code16,
[cat > conftest.s << EOF
.code16
data32
addr32
lgdt 0
EOF
if AC_TRY_COMMAND($AS_FOR_TARGET -o conftest.o conftest.s); then
rtems_cv_prog_gas_code16=yes
else
rtems_cv_prog_gas_code16=no
fi])
RTEMS_GAS_CODE16="$rtems_cv_prog_gas_code16"
fi
AC_SUBST(RTEMS_GAS_CODE16)
])
dnl
dnl $Id$
dnl
dnl Check for System V IPC calls used by Unix simulators
dnl
dnl 98/07/17 Dario Alcocer alcocer@netcom.com
dnl Ralf Corsepius corsepiu@faw.uni-ulm.de
dnl
dnl Note: $host_os should probably *not* ever be used here to
dnl determine if host supports System V IPC calls, since some
dnl (e.g. FreeBSD 2.x) are configured by default to include only
dnl a subset of the System V IPC calls. Therefore, to make sure
dnl all of the required calls are found, test for each call explicitly.
dnl
dnl All of the calls use IPC_PRIVATE, so tests will not unintentionally
dnl modify any existing key sets. See the man pages for semget, shmget,
dnl msgget, semctl, shmctl and msgctl for details.
AC_DEFUN(RTEMS_SYSV_SEM,
[AC_REQUIRE([AC_PROG_CC])
AC_REQUIRE([RTEMS_CANONICAL_HOST])
AC_CACHE_CHECK(whether $RTEMS_HOST supports System V semaphores,
rtems_cv_sysv_sem,
[
AC_TRY_RUN([
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/sem.h>
int main () {
#if !defined(sun)
union semun arg ;
#else
union semun {
int val;
struct semid_ds *buf;
ushort *array;
} arg;
#endif
int id=semget(IPC_PRIVATE,1,IPC_CREAT|0400);
if (id == -1)
exit(1);
arg.val = 0; /* avoid implicit type cast to union */
if (semctl(id, 0, IPC_RMID, arg) == -1)
exit(1);
exit(0);
}
],
rtems_cv_sysv_sem="yes", rtems_cv_sysv_sem="no", :)
])
])
AC_DEFUN(RTEMS_SYSV_SHM,
[AC_REQUIRE([AC_PROG_CC])
AC_REQUIRE([RTEMS_CANONICAL_HOST])
AC_CACHE_CHECK(whether $RTEMS_HOST supports System V shared memory,
rtems_cv_sysv_shm,
[
AC_TRY_RUN([
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/shm.h>
int main () {
int id=shmget(IPC_PRIVATE,1,IPC_CREAT|0400);
if (id == -1)
exit(1);
if (shmctl(id, IPC_RMID, 0) == -1)
exit(1);
exit(0);
}
],
rtems_cv_sysv_shm="yes", rtems_cv_sysv_shm="no", :)
])
])
AC_DEFUN(RTEMS_SYSV_MSG,
[AC_REQUIRE([AC_PROG_CC])
AC_REQUIRE([RTEMS_CANONICAL_HOST])
AC_CACHE_CHECK(whether $RTEMS_HOST supports System V messages,
rtems_cv_sysv_msg,
[
AC_TRY_RUN([
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/msg.h>
int main () {
int id=msgget(IPC_PRIVATE,IPC_CREAT|0400);
if (id == -1)
exit(1);
if (msgctl(id, IPC_RMID, 0) == -1)
exit(1);
exit(0);
}
],
rtems_cv_sysv_msg="yes", rtems_cv_sysv_msg="no", :)
])
])
AC_DEFUN(RTEMS_CHECK_SYSV_UNIX,
[AC_REQUIRE([RTEMS_CANONICAL_HOST])
if test "$RTEMS_CPU" = "unix" ; then
RTEMS_SYSV_SEM
if test "$rtems_cv_sysv_sem" != "yes" ; then
AC_MSG_ERROR([System V semaphores don't work, required by simulator])
fi
RTEMS_SYSV_SHM
if test "$rtems_cv_sysv_shm" != "yes" ; then
AC_MSG_ERROR([System V shared memory doesn't work, required by simulator])
fi
RTEMS_SYSV_MSG
if test "$rtems_cv_sysv_msg" != "yes" ; then
AC_MSG_ERROR([System V messages don't work, required by simulator])
fi
fi
])
dnl $Id$
dnl Report all available bsps for a target,
@@ -948,7 +883,9 @@ else
fi
])dnl
dnl
dnl $Id$
dnl
AC_DEFUN(RTEMS_CHECK_MULTIPROCESSING,
[dnl
@@ -965,8 +902,7 @@ AC_CACHE_CHECK([whether BSP supports multiprocessing],
fi
else
rtems_cv_HAS_MP="no";
fi
])
fi])
if test "$rtems_cv_HAS_MP" = "yes"; then
HAS_MP="yes"
else
@@ -975,41 +911,31 @@ fi
AC_SUBST(HAS_MP)
])
dnl
dnl $Id$
dnl
dnl RTEMS_CHECK_MAKEFILE(path)
dnl Search for Makefile.in's within the directory starting
dnl at path and append an entry for Makefile to global variable
dnl "makefiles" (from configure.in) for each Makefile.in found
dnl
AC_DEFUN(RTEMS_CHECK_MAKEFILE,
[RTEMS_CHECK_FILES_IN($1,Makefile,makefiles)
])
dnl
dnl $Id$
dnl
dnl RTEMS_CHECK_FILES_IN(path,file,var)
dnl path .. path relative to srcdir, where to start searching for files
dnl file .. name of the files to search for
dnl var .. shell variable to append files found
AC_DEFUN(RTEMS_CHECK_FILES_IN,
[
AC_MSG_CHECKING(for $2.in in $1)
if test -d $srcdir/$1; then
rtems_av_save_dir=`pwd`;
cd $srcdir;
rtems_av_tmp=`find $1 -name "$2.in" -print | sed "s/$2\.in/%/" | sort | sed "s/%/$2/"`
$3="$$3 $rtems_av_tmp";
cd $rtems_av_save_dir;
AC_MSG_RESULT(done)
AC_DEFUN(RTEMS_CHECK_POSIX_API,
[dnl
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
AC_CACHE_CHECK([whether BSP supports libposix],
rtems_cv_HAS_POSIX_API,
[dnl
case "$RTEMS_CPU" in
unix*)
rtems_cv_HAS_POSIX_API="no"
;;
*)
if test "${RTEMS_HAS_POSIX_API}" = "yes"; then
rtems_cv_HAS_POSIX_API="yes";
else
rtems_cv_HAS_POSIX_API="disabled";
fi
;;
esac])
if test "$rtems_cv_HAS_POSIX_API" = "yes"; then
HAS_POSIX_API="yes";
else
AC_MSG_RESULT(no)
HAS_POSIX_API="no";
fi
AC_SUBST(HAS_POSIX_API)dnl
])

1045
c/src/tests/configure vendored
View File

File diff suppressed because it is too large Load Diff

71
c/src/tests/configure.in
View File

@@ -3,35 +3,26 @@ dnl
dnl $Id$
AC_PREREQ(2.13)
AC_INIT(libtests)
AC_INIT(samples)
RTEMS_TOP(../../..)
AC_CONFIG_AUX_DIR(../../..)
AC_PROG_MAKE_SET
RTEMS_CANONICAL_TARGET_CPU
AM_INIT_AUTOMAKE(rtems-c-src-tests,$RTEMS_VERSION,no)
AM_MAINTAINER_MODE
RTEMS_ENABLE_MULTIPROCESSING
RTEMS_ENABLE_POSIX
RTEMS_ENABLE_NETWORKING
RTEMS_ENABLE_RDBG
RTEMS_ENABLE_INLINES
RTEMS_ENABLE_CXX
RTEMS_ENABLE_GCC28
RTEMS_ENABLE_LIBCDIR
RTEMS_ENABLE_BARE
dnl RTEMS_ENABLE_RTEMSBSP
RTEMS_ENABLE_TESTS
RTEMS_ENV_RTEMSBSP
dnl BEGIN configure.host.in
AC_PROG_INSTALL
dnl BEGIN configure.target.in
RTEMS_CHECK_CPU
RTEMS_CANONICAL_HOST
@@ -47,66 +38,30 @@ fi
RTEMS_CANONICALIZE_TOOLS
dnl if this is an i386, does gas have good code16 support?
RTEMS_I386_GAS_CODE16
RTEMS_CHECK_SYSV_UNIX
RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP)
RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP)
# always build the test tools
testtools_cfgdirs="tools/generic"
if test "$HAS_MP" = "yes"; then
makefiles="$makefiles samples/base_mp/Makefile"
makefiles="$makefiles samples/base_mp/node1/Makefile"
makefiles="$makefiles samples/base_mp/node2/Makefile"
makefiles="$makefiles samples/base_sp/Makefile"
fi
RTEMS_CHECK_POSIX_API(RTEMS_BSP)
if test "$tests_enabled" = "yes"; then
RTEMS_CHECK_MAKEFILE(libtests)
RTEMS_CHECK_MAKEFILE(sptests)
RTEMS_CHECK_MAKEFILE(tmtests)
cfg_subdirs="libtests sptests"
if test "$HAS_MP" = "yes"; then
RTEMS_CHECK_MAKEFILE(mptests)
cfg_subdirs="$cfg_subdirs mptests"
fi
if test "$RTEMS_HAS_POSIX_API" = "yes"; then
RTEMS_CHECK_MAKEFILE(psxtests)
if test "$HAS_POSIX_API" = "yes"; then
cfg_subdirs="$cfg_subdirs psxtests"
fi
if test -d "$srcdir/tools/$RTEMS_CPU"; then
testtools_cfgdirs="$testtools_cfgdirs tools/$RTEMS_CPU"
fi
cfg_subdirs="$cfg_subdirs tmtests"
fi
AC_SUBST(rtems_cv_prog_cc_cross)
AC_SUBST(RTEMS_HAS_CPLUSPLUS)
AC_SUBST(RTEMS_USE_GCC272)
AC_SUBST(BARE_CPU_CFLAGS)
AC_SUBST(BARE_CPU_MODEL)
AC_SUBST(program_prefix)
AC_SUBST(CC_CFLAGS_DEFAULT)
AC_SUBST(CC_CFLAGS_DEBUG_V)
AC_SUBST(CC_CFLAGS_PROFILE_V)
AC_SUBST(CC_LDFLAGS_PROFILE_V)
AC_CONFIG_SUBDIRS($testtools_cfgdirs)
AC_CONFIG_SUBDIRS(tools)
AC_CONFIG_SUBDIRS(support)
AC_CONFIG_SUBDIRS(samples)
AC_CONFIG_SUBDIRS($cfg_subdirs)
# Try to explicitly list a Makefile here
AC_OUTPUT(
Makefile
support/Makefile
support/include/Makefile
support/stubdr/Makefile
support/wrapup/Makefile
tools/Makefile
samples/Makefile
samples/base_sp/Makefile
samples/cdtest/Makefile
samples/hello/Makefile
samples/minimum/Makefile
samples/paranoia/Makefile
samples/ticker/Makefile
samples/unlimited/Makefile
$makefiles)
)

408
c/src/tests/libtests/Makefile.in
View File

@@ -1,30 +1,404 @@
# Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
#
# $Id$
# $Id$
#
@SET_MAKE@
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ..
subdir = libtests
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
include $(RTEMS_ROOT)/make/directory.cfg
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@
BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
BARE_CPU_MODEL = @BARE_CPU_MODEL@
CC = @CC@
CC_FOR_TARGET = @CC_FOR_TARGET@
CPP = @CPP@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXX_FOR_TARGET = @CXX_FOR_TARGET@
GCCSED = @GCCSED@
HAS_CPLUSPLUS = @HAS_CPLUSPLUS@
INSTALL_CHANGE = @INSTALL_CHANGE@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
PACKAGE = @PACKAGE@
PACKHEX = @PACKHEX@
PROJECT_ROOT = @PROJECT_ROOT@
RTEMS_BSP = @RTEMS_BSP@
RTEMS_CPU = @RTEMS_CPU@
RTEMS_HOST = @RTEMS_HOST@
RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
RTEMS_ROOT = @RTEMS_ROOT@
RTEMS_TOPdir = @RTEMS_TOPdir@
RTEMS_USE_MACROS = @RTEMS_USE_MACROS@
VERSION = @VERSION@
# We only build the tests for the rtems++ library if HAS_CPLUSPLUS was defined
LIBRTEMSCPLUSPLUS_yes_V = rtems++
LIBRTEMSCPLUSPLUS = $(LIBRTEMSCPLUSPLUS_$(HAS_CPLUSPLUS)_V)
AUTOMAKE_OPTIONS = foreign 1.4
ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
SUB_DIRS = cpuuse malloctest monitor rtmonuse stackchk termios \
$(LIBRTEMSCPLUSPLUS)
SUBDIRS = cpuuse malloctest monitor rtmonuse stackchk termios rtems++
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
CONFIG_CLEAN_FILES =
DIST_COMMON = README Makefile.am Makefile.in aclocal.m4 configure \
configure.in
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../automake/subdirs.am $(top_srcdir)/../../../../automake/local.am
cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
@SET_MAKE@
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
test "$$subdir" = "." && dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
mostlyclean-tags:
clean-tags:
distclean-tags:
-rm -f TAGS ID
maintainer-clean-tags:
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
-rm -rf $(distdir)
GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
dc_install_base=`cd $(distdir)/=inst && pwd`; \
cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) dist
-rm -rf $(distdir)
@banner="$(distdir).tar.gz is ready for distribution"; \
dashes=`echo "$$banner" | sed s/./=/g`; \
echo "$$dashes"; \
echo "$$banner"; \
echo "$$dashes"
dist: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
dist-all: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
distdir: $(DISTFILES)
-rm -rf $(distdir)
mkdir $(distdir)
-chmod 777 $(distdir)
here=`cd $(top_builddir) && pwd`; \
top_distdir=`cd $(distdir) && pwd`; \
distdir=`cd $(distdir) && pwd`; \
cd $(top_srcdir) \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
for subdir in $(SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am:
install-exec: install-exec-recursive
install-data-am:
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile
all-redirect: all-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-tags mostlyclean-generic
mostlyclean: mostlyclean-recursive
clean-am: clean-tags clean-generic mostlyclean-am
clean: clean-recursive
distclean-am: distclean-tags distclean-generic clean-am
distclean: distclean-recursive
-rm -f config.status
maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-recursive
-rm -f config.status
.PHONY: install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
depend-recursive \
preinstall-recursive \
debug-recursive \
profile-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
debug: debug-recursive
.PHONY: debug-recursive
profile: profile-recursive
.PHONY: profile-recursive
preinstall: preinstall-recursive
.PHONY: preinstall-recursive
depend: depend-recursive
.PHONY: depend-recursive
debug-am:
debug: debug-am
.PHONY: debug debug-am
profile-am:
profile: profile-am
.PHONY: profile profile-am
preinstall-am:
preinstall: preinstall-am
.PHONY: preinstall preinstall-am
depend-am:
depend: depend-am
.PHONY: depend depend-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

4
c/src/tests/libtests/cpuuse/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = libtests/cpuuse
top_builddir = ..
subdir = cpuuse
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/libtests/malloctest/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = libtests/malloctest
top_builddir = ..
subdir = malloctest
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/libtests/monitor/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = libtests/monitor
top_builddir = ..
subdir = monitor
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

10
c/src/tests/libtests/rtems++/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = libtests/rtems++
top_builddir = ..
subdir = rtems++
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@
@@ -19,7 +19,7 @@ MANAGERS = event io msg sem signal timer rate_monotonic
# C++ source names, if any, go here -- minus the .cc
CC_PIECES = Init Task1 Task2 Task3
CC_FILES = $(CC_PIECES:%=%.cc)
CC_FILES = @HAS_CXX_TRUE@$(CC_PIECES:%=%.cc)
CC_O_FILES = $(CC_PIECES:%=${ARCH}/%.o)
H_FILES = System.h
@@ -62,8 +62,8 @@ LDFLAGS +=
CLEAN_ADDITIONS +=
CLOBBER_ADDITIONS +=
all: ${ARCH} $(SRCS) $(PGM)
$(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/tests
all: @HAS_CXX_TRUE@${ARCH} $(SRCS) $(PGM)
@HAS_CXX_TRUE@ $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/tests
${PGM}: $(OBJS) $(LINK_FILES)
$(make-exe)

4
c/src/tests/libtests/rtmonuse/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = libtests/rtmonuse
top_builddir = ..
subdir = rtmonuse
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/libtests/stackchk/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = libtests/stackchk
top_builddir = ..
subdir = stackchk
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/libtests/termios/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = libtests/termios
top_builddir = ..
subdir = termios
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

417
c/src/tests/mptests/Makefile.in
View File

@@ -1,28 +1,415 @@
# Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
#
# $Id$
# $Id$
#
@SET_MAKE@
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ..
subdir = mptests
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
include $(RTEMS_ROOT)/make/directory.cfg
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@
BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
BARE_CPU_MODEL = @BARE_CPU_MODEL@
CC = @CC@
CC_CFLAGS_DEBUG_V = @CC_CFLAGS_DEBUG_V@
CC_CFLAGS_DEFAULT = @CC_CFLAGS_DEFAULT@
CC_CFLAGS_PROFILE_V = @CC_CFLAGS_PROFILE_V@
CC_FOR_TARGET = @CC_FOR_TARGET@
CC_LDFLAGS_PROFILE_V = @CC_LDFLAGS_PROFILE_V@
CPP = @CPP@
GCCSED = @GCCSED@
INSTALL_CHANGE = @INSTALL_CHANGE@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
PACKAGE = @PACKAGE@
PACKHEX = @PACKHEX@
PROJECT_ROOT = @PROJECT_ROOT@
RTEMS_BSP = @RTEMS_BSP@
RTEMS_CPU = @RTEMS_CPU@
RTEMS_HOST = @RTEMS_HOST@
RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
RTEMS_ROOT = @RTEMS_ROOT@
RTEMS_TOPdir = @RTEMS_TOPdir@
RTEMS_USE_GCC272 = @RTEMS_USE_GCC272@
RTEMS_USE_MACROS = @RTEMS_USE_MACROS@
VERSION = @VERSION@
all: README
AUTOMAKE_OPTIONS = foreign 1.4
ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
SUB_DIRS = mp01 mp02 mp03 mp04 mp05 mp06 mp07 mp08 mp09 mp10 mp11 mp12 mp13 \
mp14
project_bspdir = $(PROJECT_ROOT)/@RTEMS_BSP@
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
PREINSTALLDIRS = $(project_bspdir)/tests/screens/mptests $(project_bspdir)/tests/screens/mptests/node1 $(project_bspdir)/tests/screens/mptests/node2
SUBDIRS = . mp01 mp02 mp03 mp04 mp05 mp06 mp07 mp08 mp09 mp10 mp11 mp12 mp13 mp14
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
CONFIG_CLEAN_FILES =
DIST_COMMON = README Makefile.am Makefile.in aclocal.m4 configure \
configure.in
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../automake/subdirs.am $(top_srcdir)/../../../../automake/local.am
cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
@SET_MAKE@
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
test "$$subdir" = "." && dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
mostlyclean-tags:
clean-tags:
distclean-tags:
-rm -f TAGS ID
maintainer-clean-tags:
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
-rm -rf $(distdir)
GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
dc_install_base=`cd $(distdir)/=inst && pwd`; \
cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) dist
-rm -rf $(distdir)
@banner="$(distdir).tar.gz is ready for distribution"; \
dashes=`echo "$$banner" | sed s/./=/g`; \
echo "$$dashes"; \
echo "$$banner"; \
echo "$$dashes"
dist: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
dist-all: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
distdir: $(DISTFILES)
-rm -rf $(distdir)
mkdir $(distdir)
-chmod 777 $(distdir)
here=`cd $(top_builddir) && pwd`; \
top_distdir=`cd $(distdir) && pwd`; \
distdir=`cd $(distdir) && pwd`; \
cd $(top_srcdir) \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
for subdir in $(SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am:
install-exec: install-exec-recursive
install-data-am:
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile all-local
all-redirect: all-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-tags mostlyclean-generic
mostlyclean: mostlyclean-recursive
clean-am: clean-tags clean-generic mostlyclean-am
clean: clean-recursive
distclean-am: distclean-tags distclean-generic clean-am
distclean: distclean-recursive
-rm -f config.status
maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-recursive
-rm -f config.status
.PHONY: install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-local all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
$(PREINSTALLDIRS):
@$(mkinstalldirs) $@
all-local: $(PREINSTALLDIRS)
depend-recursive \
preinstall-recursive \
debug-recursive \
profile-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
debug: debug-recursive
.PHONY: debug-recursive
profile: profile-recursive
.PHONY: profile-recursive
preinstall: preinstall-recursive
.PHONY: preinstall-recursive
depend: depend-recursive
.PHONY: depend-recursive
debug-am:
debug: debug-am
.PHONY: debug debug-am
profile-am:
profile: profile-am
.PHONY: profile profile-am
preinstall-am:
preinstall: preinstall-am
.PHONY: preinstall preinstall-am
depend-am:
depend: depend-am
.PHONY: depend depend-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

4
c/src/tests/mptests/mp01/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = mptests/mp01
top_builddir = ..
subdir = mp01
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp01/node1/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp01/node1
top_builddir = ../..
subdir = mp01/node1
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp01/node2/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp01/node2
top_builddir = ../..
subdir = mp01/node2
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp02/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = mptests/mp02
top_builddir = ..
subdir = mp02
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp02/node1/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp02/node1
top_builddir = ../..
subdir = mp02/node1
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp02/node2/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp02/node2
top_builddir = ../..
subdir = mp02/node2
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp03/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = mptests/mp03
top_builddir = ..
subdir = mp03
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp03/node1/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp03/node1
top_builddir = ../..
subdir = mp03/node1
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp03/node2/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp03/node2
top_builddir = ../..
subdir = mp03/node2
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp04/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = mptests/mp04
top_builddir = ..
subdir = mp04
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp04/node1/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp04/node1
top_builddir = ../..
subdir = mp04/node1
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp04/node2/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp04/node2
top_builddir = ../..
subdir = mp04/node2
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp05/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = mptests/mp05
top_builddir = ..
subdir = mp05
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp05/node1/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp05/node1
top_builddir = ../..
subdir = mp05/node1
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp05/node2/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp05/node2
top_builddir = ../..
subdir = mp05/node2
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp06/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = mptests/mp06
top_builddir = ..
subdir = mp06
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp06/node1/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp06/node1
top_builddir = ../..
subdir = mp06/node1
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp06/node2/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp06/node2
top_builddir = ../..
subdir = mp06/node2
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp07/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = mptests/mp07
top_builddir = ..
subdir = mp07
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp07/node1/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp07/node1
top_builddir = ../..
subdir = mp07/node1
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp07/node2/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp07/node2
top_builddir = ../..
subdir = mp07/node2
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp08/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = mptests/mp08
top_builddir = ..
subdir = mp08
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp08/node1/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp08/node1
top_builddir = ../..
subdir = mp08/node1
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp08/node2/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp08/node2
top_builddir = ../..
subdir = mp08/node2
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp09/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = mptests/mp09
top_builddir = ..
subdir = mp09
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp09/node1/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp09/node1
top_builddir = ../..
subdir = mp09/node1
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp09/node2/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../../..
subdir = mptests/mp09/node2
top_builddir = ../..
subdir = mp09/node2
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

4
c/src/tests/mptests/mp10/Makefile.in
View File

@@ -5,8 +5,8 @@
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = ../..
subdir = mptests/mp10
top_builddir = ..
subdir = mp10
RTEMS_ROOT = @RTEMS_ROOT@
PROJECT_ROOT = @PROJECT_ROOT@

Some files were not shown because too many files have changed in this diff Show More