RTOS/rtems
1
0
Fork 0
forked from Imagelibrary/rtems
Code Pull Requests Activity

2001-11-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>

Browse Source 
* Makefile.am: Add @exceptions@ to SUBDIRS.
	* configure.ac: Apply RTEMS_BSPOPTS_*(*) to merge-in settings from
	make/custom/mpc8260ads.cfg, add RTEMS_PPC_EXCEPTIONS([new]).
	* include/Makefile.am: Convert PREINSTALL_FILES to
	TMPINSTALL_FILES, include force-preinstall.am.
	* wrapup/Makefile.am: Apply @exceptions@.
This commit is contained in:
Joel Sherrill
2001-11-20 18:53:27 +00:00
parent 73d6cdc548
commit 36024a6c2e
5 changed files with 53 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
c/src/lib/libbsp/powerpc/mpc8260ads/ChangeLog
View File

@@ -1,3 +1,12 @@
2001-11-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Add @exceptions@ to SUBDIRS.
* configure.ac: Apply RTEMS_BSPOPTS_*(*) to merge-in settings from
make/custom/mpc8260ads.cfg, add RTEMS_PPC_EXCEPTIONS([new]).
* include/Makefile.am: Convert PREINSTALL_FILES to
TMPINSTALL_FILES, include force-preinstall.am.
* wrapup/Makefile.am: Apply @exceptions@.
2001-10-29 Joel Sherrill <joel@OARcorp.com>
* .cvsignore: Add more entries.

3
c/src/lib/libbsp/powerpc/mpc8260ads/Makefile.am
View File

@@ -7,7 +7,8 @@ ACLOCAL_AMFLAGS = -I ../../../../../../aclocal
# wrapup is the one that actually builds and installs the library
# from the individual .rel files built in other directories
SUBDIRS = clock console include vectors irq network start startup wrapup
SUBDIRS = include clock console vectors irq network start startup \
@exceptions@ wrapup
include $(top_srcdir)/../../bsp.am

38
c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac
View File

@@ -20,6 +20,41 @@ RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP)
RTEMS_CHECK_BSP_CACHE(RTEMS_BSP)
RTEMS_CANONICAL_HOST
RTEMS_BSPOPTS_SET([UARTS_USE_TERMIOS],[*],[0])
RTEMS_BSPOPTS_HELP([UARTS_USE_TERMIOS],
[Define to 1 if you want termios support for every port.
Termios support is independent of the choice of UART I/O mode.])
RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[*],[SCC2_MINOR])
RTEMS_BSPOPTS_HELP([CONSOLE_MINOR],
[(BSP--console driver) Must be defined to be one of SMC1_MINOR,
SMC2_MINOR, SCC2_MINOR, SCC3_MINOR, or SCC4_MINOR.
Determines which device will be registered as /dev/console.])
RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[*],[0])
RTEMS_BSPOPTS_HELP([UARTS_IO_MODE],
[(BSP--console driver)
Define to 0 or 1 if you want polled I/O performed by RTEMS.
Define to 1 if you want interrupt-driven performed by RTEMS.
Define to 2 if you want polled I/O performed by EPPCBug.
There is no provision to have a mix of interrupt-driven and polled I/O
ports, except that the printk port may use a different mode from the
other ports. If this is done, do not open the printk port from an RTEMS
application. With EPPCBug 1.1, if mode 2 is selected, CONSOLE_MINOR
must be set to SMC1_MINOR. This is a deficiency of the firmware: it
does not perform serial I/O on any port other than its default debug
port, which must be SMC1.])
RTEMS_BSPOPTS_SET([PRINTK_MINOR],[*],[SMC2_MINOR])
RTEMS_BSPOPTS_HELP([PRINTK_MINOR],
[(BSP--console driver)
Must be defined to be one of SMC1_MINOR, SMC2_MINOR, SCC2_MINOR,
SCC3_MINOR, or SCC4_MINOR. Determines which device is used for output
by printk(). If the port that printk() uses is also used for other
I/O (e.g. if PRINTK_MINOR == \$CONSOLE_MINOR), then both ports should
use the same type of I/O, otherwise the drivers will likely conflict with
each other.])
AM_CONFIG_HEADER(include/bspopts.h)
RTEMS_PROJECT_ROOT
@@ -36,4 +71,7 @@ vectors/Makefile
start/Makefile
startup/Makefile
wrapup/Makefile])
RTEMS_PPC_EXCEPTIONS([new])
AC_OUTPUT

5
c/src/lib/libbsp/powerpc/mpc8260ads/include/Makefile.am
View File

@@ -15,10 +15,11 @@ $(PROJECT_INCLUDE)/bsp:
$(PROJECT_INCLUDE)/%.h: %.h
$(INSTALL_DATA) $< $@
PREINSTALL_FILES = $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp \
TMPINSTALL_FILES = $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp \
$(include_HEADERS:%=$(PROJECT_INCLUDE)/%) \
$(include_bsp_HEADERS:%=$(PROJECT_INCLUDE)/bsp/%)
all-local: $(PREINSTALL_FILES)
all-local: $(TMPINSTALL_FILES)
include $(top_srcdir)/../../../../../../automake/force-preinstall.am
include $(top_srcdir)/../../../../../../automake/local.am

2
c/src/lib/libbsp/powerpc/mpc8260ads/wrapup/Makefile.am
View File

@@ -17,7 +17,7 @@ BSP_PIECES = clock irq start startup console vectors $(NETWORKING)
# bummer; have to use $foreach since % pattern subst rules only replace 1x
OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \
$(wildcard ../../../../libcpu/$(RTEMS_CPU)/shared/*/$(ARCH)/*.o) \
$(wildcard ../../../../libcpu/powerpc/new_exception_processing/$(ARCH)/*.rel) \
../@exceptions@/$(ARCH)/rtems-cpu.rel \
$(wildcard ../../../../libcpu/$(RTEMS_CPU)/mpc8260/*/$(ARCH)/*.o)
LIB = $(ARCH)/libbsp.a