RTOS/rtems
1
0
Fork 0
forked from Imagelibrary/rtems
Code Pull Requests Activity

Patch from Eric Valette <valette@crf.canon.fr> that makes sure the

Browse Source 
interrupt code works on "old buggy MCP750 boards".  The symptom was
that there was no ethernet PCI IRQ at all.
This commit is contained in:
Joel Sherrill
2000-01-10 13:26:00 +00:00
parent d273d78ae6
commit 338f1dc186
1 changed files with 5 additions and 24 deletions
Download Patch File Download Diff File Expand all files Collapse all files

29
c/src/lib/libbsp/powerpc/shared/irq/irq_init.c
View File

@@ -25,6 +25,10 @@
#include <libcpu/raw_exception.h> #include <libcpu/raw_exception.h>
#include <bsp/motorola.h> #include <bsp/motorola.h>
/*
#define SHOW_ISA_PCI_BRIDGE_SETTINGS
*/
typedef struct { typedef struct {
unsigned char bus; /* few chance the PCI/ISA bridge is not on first bus but ... */ unsigned char bus; /* few chance the PCI/ISA bridge is not on first bus but ... */
unsigned char device; unsigned char device;
@@ -126,9 +130,7 @@ void VIA_isa_bridge_interrupts_setup(void)
#ifdef SCAN_PCI_PRINT #ifdef SCAN_PCI_PRINT
printk("Vendor/device = %x\n", temp); printk("Vendor/device = %x\n", temp);
#endif #endif
if ( (temp == (((unsigned short) PCI_VENDOR_ID_VIA) | (PCI_DEVICE_ID_VIA_82C586_1 << 16))) if ((temp == (((unsigned short) PCI_VENDOR_ID_VIA) | (PCI_DEVICE_ID_VIA_82C586_0 << 16)))
||
(temp == (((unsigned short) PCI_VENDOR_ID_VIA) | (PCI_DEVICE_ID_VIA_82C586_0 << 16)))
) { ) {
bridge = pci_dev; bridge = pci_dev;
via_82c586 = &bridge; via_82c586 = &bridge;
@@ -196,27 +198,6 @@ loop_exit:
#ifdef SHOW_ISA_PCI_BRIDGE_SETTINGS #ifdef SHOW_ISA_PCI_BRIDGE_SETTINGS
printk(" PCI ISA bridge control2 = %x\n", (unsigned) tmp); printk(" PCI ISA bridge control2 = %x\n", (unsigned) tmp);
#endif #endif
/*
* Enable 4D0/4D1 ISA interrupt level/edge config registers
*/
tmp |= 0x20;
pci_write_config_byte(via_82c586->bus, via_82c586->device, via_82c586->function,
0x47, tmp);
#ifdef SHOW_ISA_PCI_BRIDGE_SETTINGS
tmp = inb(ISA8259_S_ELCR);
printk(" PCI ISA bridge slave edge/level control bit = %x\n", (unsigned) tmp);
tmp = inb(ISA8259_M_ELCR);;
printk(" PCI ISA bridge master edge/level control bit = %x\n", (unsigned) tmp);
#endif
/*
* Must disable the 4D0/4D1 ISA interrupt level/edge config registers
* or the card will die a soon as we we will enable external interrupts
*/
pci_read_config_byte(via_82c586->bus, via_82c586->device, via_82c586->function,
0x47, &tmp);
tmp &= ~(0x20);
pci_write_config_byte(via_82c586->bus, via_82c586->device, via_82c586->function,
0x47, tmp);
/* /*
* Show the Interrupt inputs inverting/non-inverting level status * Show the Interrupt inputs inverting/non-inverting level status
*/ */