RTOS/rtems
1
0
Fork 0
forked from Imagelibrary/rtems
Code Pull Requests Activity

Patch from Erik Ivanenko <erik.ivanenko@utoronto.ca>:

Browse Source 
Please find attached a start.s that includes a cli prior to the hlt
    instruction.  This ensures that external interrupts cannot restart
    the system after returning to the startup code.  ( According to the hlt
    docs, they will! )

    Also find a new timer.c.   ( I forgot to update the countdowm value
    in the timer when I changed the PSCLK frequency in start.s) .  This
    improves timer accuracy.

    The raw_idt_notify messages are no longer infinite, I tested sp11 and
    sp05, both which were bad, and I have seen the message print once in
    one test.  I think it's ok if it prints out once.  In fact, I don't
    think you can effectively stop it!
This commit is contained in:
Joel Sherrill
1998-09-24 13:55:18 +00:00
parent 287e958464
commit 32f3e34d4d
2 changed files with 7 additions and 33 deletions
Download Patch File Download Diff File Expand all files Collapse all files

32
c/src/lib/libbsp/i386/i386ex/start/start.s
View File

@@ -65,7 +65,6 @@ SYM(Interrupt_descriptor_table): /* Now in data section */
END_DATA
BEGIN_DATA
/* .section .gdt */
PUBLIC (_Global_descriptor_table)
SYM(GDTR): DESC3( GDT_TABLE, 0x1f ); # one less than the size
@@ -345,20 +344,6 @@ SYM(SetUCS1):
* So, move the whole data section down.
********************************************************/
/* SYM(xfer_gdt):
movw $ _ram_gdt_offset , di
movw $ _ram_gdt_segment , cx
mov cx , es
movw $ _gdt_size , cx
movw $ _rom_gdt_segment , ax
movw $ _rom_gdt_offset , si
mov ax , ds
repne
movsb
*/
movw $ _ram_data_offset , di
movw $ _ram_data_segment, cx
mov cx , es
@@ -376,14 +361,10 @@ SYM(SetUCS1):
* Table Register
****************************/
/* movw $ _ram_gdt_segment, ax */
#ifdef NEXT_GAS
data32
addr32
#endif
/* lgdt _ram_gdt_offset # location of GDT */
lgdt SYM(GDTR) # location of GDT
@@ -405,13 +386,11 @@ SYM(SetUCS):
* and load CS selector
*********************/
/* ljmpl $ GDT_CODE_PTR , $ SYM(_copy_data) # sets the code selector*/
ljmpl $ GDT_CODE_PTR , $ SYM(_load_segment_registers) # sets the code selector
/*
* Copy the data section down to RAM
* Load the segment registers
*/
/*SYM(_copy_data): */
SYM(_load_segment_registers):
.code32
pLOAD_SEGMENT( GDT_DATA_PTR, fs)
@@ -420,12 +399,6 @@ SYM(_load_segment_registers):
pLOAD_SEGMENT( GDT_DATA_PTR, ds)
pLOAD_SEGMENT( GDT_DATA_PTR, es)
/* movl $ SYM(_data_start) , edi # ram destination
movl $ SYM(_rom_data_start) , esi # rom data source
movl $ SYM(_data_size) , ecx # amount to move
repne # while ecx != 0
movsb # move a byte
*/
/*
* Set up the stack
*/
@@ -460,7 +433,8 @@ SYM (zero_bss):
call SYM(boot_card)
addl $12,esp
hlt
cli # stops interrupts from being processed after hlt!
hlt # shutdown
END

6
c/src/lib/libbsp/i386/i386ex/timer/timer.c
View File

@@ -47,7 +47,7 @@ void TimerOn(const rtems_raw_irq_connect_data* used)
Ttimer_val = 0; /* clear timer ISR count */
outport_byte ( TMRCON , 0xb0 ); /* select tmr2, stay in mode 0 */
outport_byte ( TMR1 , 0xd2 ); /* set to 250 usec interval */
outport_byte ( TMR1 , 0xfa ); /* set to 250 usec interval */
outport_byte ( TMR1 , 0x00 );
outport_byte ( TMRCON , 0x64 ); /* change to mode 2 ( starts timer ) */
/* interrupts ARE enabled */
@@ -78,7 +78,7 @@ static rtems_raw_irq_connect_data timer_raw_irq_data = {
void Timer_exit()
{
if (!i386_delete_idt_entry(&timer_raw_irq_data)) {
printk("Timer raw handler deconnexion failed\n");
printk("Timer_exit:Timer raw handler removal failed\n");
rtems_fatal_error_occurred(1);
}
}
@@ -94,7 +94,7 @@ void Timer_initialize()
atexit(Timer_exit); /* Try not to hose the system at exit. */
if (!i386_set_idt_entry (&timer_raw_irq_data)) {
printk("raw handler connexion failed\n");
printk("Timer_initialize: raw handler installation failed\n");
rtems_fatal_error_occurred(1);
}
}