- Simple timing functions based on a time base reference.

- u-boot header file
This commit is contained in:
Thomas Doerfler
2008-07-10 06:17:47 +00:00
parent e0ecc66d90
commit 214cbd92bc
5 changed files with 258 additions and 1 deletions

View File

@@ -1,3 +1,10 @@
2008-07-09 Sebastian Huber <sebastian.huber@embedded-brains.de>
* shared/clock/clock.c: Alternative clock driver. Uses exception handler
directly. Supports special variants for Book E and e300 cores. For
standard decrementer CPUs the new decrementer value is calculated with
reference to a time base so that a time drift is avoided.
2008-07-01 Joel Sherrill <joel.sherrill@oarcorp.com>
* shared/uboot_getenv.c: New file.

View File

@@ -30,7 +30,7 @@
#define TSEC_IFMODE_GMII 1
#if defined(MPC8349EAMDS)
#define TSEC_IFMODE TSEC_IFMODE_GMII
#define TSEC_IFMODE TSEC_IFMODE_RGMII
#endif
#if defined(HSC_CM01)

View File

@@ -0,0 +1,77 @@
/**
* @file
*
* @ingroup powerpc_shared
*
* @brief Header file for tic-tac code.
*/
/*
* Copyright (c) 2008
* Embedded Brains GmbH
* Obere Lagerstr. 30
* D-82178 Puchheim
* Germany
* rtems@embedded-brains.de
*
* The license and distribution terms for this file may be found in the file
* LICENSE in this distribution or at http://www.rtems.com/license/LICENSE.
*/
/**
* @brief Reset reference ticks for tac().
*/
static inline void tic()
{
uint32_t tmp;
asm volatile (
"mftb 0;"
"stw 0, ppc_tic_tac@sdarel(13);"
: "=r" (tmp)
);
}
/**
* @brief Returns number of ticks since last tic().
*/
static inline uint32_t tac()
{
uint32_t ticks;
uint32_t tmp;
asm volatile (
"mftb %0;"
"lwz %1, ppc_tic_tac@sdarel(13);"
"subf %0, %1, %0;"
: "=r" (ticks), "=r" (tmp)
);
return ticks;
}
/**
* @brief Reset reference ticks for bam().
*/
static inline void boom()
{
uint32_t tmp;
asm volatile (
"mftb 0;"
"stw 0, ppc_boom_bam@sdarel(13);"
: "=r" (tmp)
);
}
/**
* @brief Returns number of ticks since last boom().
*/
static inline uint32_t bam()
{
uint32_t ticks;
uint32_t tmp;
asm volatile (
"mftb %0;"
"lwz %1, ppc_boom_bam@sdarel(13);"
"subf %0, %1, %0;"
: "=r" (ticks), "=r" (tmp)
);
return ticks;
}

View File

@@ -0,0 +1,142 @@
/*
* (C) Copyright 2000 - 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
********************************************************************
* NOTE: This header file defines an interface to U-Boot. Including
* this (unmodified) header file in another file is considered normal
* use of U-Boot, and does *not* fall under the heading of "derived
* work".
********************************************************************
*/
#ifndef __U_BOOT_H__
#define __U_BOOT_H__
/*
* Board information passed to Linux kernel from U-Boot
*
* include/asm-ppc/u-boot.h
*/
#ifndef __ASSEMBLY__
typedef struct bd_info {
unsigned long bi_memstart; /* start of DRAM memory */
unsigned long bi_memsize; /* size of DRAM memory in bytes */
unsigned long bi_flashstart; /* start of FLASH memory */
unsigned long bi_flashsize; /* size of FLASH memory */
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \
|| defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
unsigned long bi_immr_base; /* base of IMMR register */
#endif
#if defined(CONFIG_MPC5xxx)
unsigned long bi_mbar_base; /* base of internal registers */
#endif
#if defined(CONFIG_MPC83XX)
unsigned long bi_immrbar;
#endif
#if defined(CONFIG_MPC8220)
unsigned long bi_mbar_base; /* base of internal registers */
unsigned long bi_inpfreq; /* Input Freq, In MHz */
unsigned long bi_pcifreq; /* PCI Freq, in MHz */
unsigned long bi_pevfreq; /* PEV Freq, in MHz */
unsigned long bi_flbfreq; /* Flexbus Freq, in MHz */
unsigned long bi_vcofreq; /* VCO Freq, in MHz */
#endif
unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
unsigned long bi_ip_addr; /* IP Address */
unsigned char bi_enetaddr[6]; /* Ethernet adress */
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
#if defined(CONFIG_CPM2)
unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */
unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */
unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */
unsigned long bi_vco; /* VCO Out from PLL, in MHz */
#endif
#if defined(CONFIG_MPC512X)
unsigned long bi_ipsfreq; /* IPS Bus Freq, in MHz */
#endif /* CONFIG_MPC512X */
#if defined(CONFIG_MPC5xxx)
unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
#endif
unsigned long bi_baudrate; /* Console Baudrate */
#if defined(CONFIG_405) || \
defined(CONFIG_405GP) || \
defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || \
defined(CONFIG_405EZ) || \
defined(CONFIG_405EX) || \
defined(CONFIG_440)
unsigned char bi_s_version[4]; /* Version of this structure */
unsigned char bi_r_version[32]; /* Version of the ROM (AMCC) */
unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */
unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */
unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
#endif
#if defined(CONFIG_HYMOD)
hymod_conf_t bi_hymod_conf; /* hymod configuration information */
#endif
#ifdef CONFIG_HAS_ETH1
/* second onboard ethernet port */
unsigned char bi_enet1addr[6];
#endif
#ifdef CONFIG_HAS_ETH2
/* third onboard ethernet port */
unsigned char bi_enet2addr[6];
#endif
#ifdef CONFIG_HAS_ETH3
unsigned char bi_enet3addr[6];
#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
unsigned int bi_opbfreq; /* OPB clock in Hz */
int bi_iic_fast[2]; /* Use fast i2c mode */
#endif
#if defined(CONFIG_NX823)
unsigned char bi_sernum[8];
#endif
#if defined(CONFIG_4xx)
#if defined(CONFIG_440GX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
int bi_phynum[4]; /* Determines phy mapping */
int bi_phymode[4]; /* Determines phy mode */
#elif defined(CONFIG_405EP) || defined(CONFIG_440)
int bi_phynum[2]; /* Determines phy mapping */
int bi_phymode[2]; /* Determines phy mode */
#else
int bi_phynum[1]; /* Determines phy mapping */
int bi_phymode[1]; /* Determines phy mode */
#endif
#endif /* defined(CONFIG_4xx) */
} bd_t;
#endif /* __ASSEMBLY__ */
#endif /* __U_BOOT_H__ */

View File

@@ -0,0 +1,31 @@
/**
* @file
*
* @ingroup powerpc_shared
*
* @brief Source file for tic-tac code.
*/
/*
* Copyright (c) 2008
* Embedded Brains GmbH
* Obere Lagerstr. 30
* D-82178 Puchheim
* Germany
* rtems@embedded-brains.de
*
* The license and distribution terms for this file may be found in the file
* LICENSE in this distribution or at http://www.rtems.com/license/LICENSE.
*/
#include <stdint.h>
/**
* @brief Referenc value for tac().
*/
uint32_t ppc_tic_tac = 0;
/**
* @brief Referenc value for bam().
*/
uint32_t ppc_boom_bam = 0;