Imagelibrary/rtems
1
0
Fork 1
mirror of https://gitlab.rtems.org/rtems/rtos/rtems.git synced 2025-11-16 12:34:45 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
81a54e64f7a0d305efb4ca9d3c4a19850238cc6d
rtems/c/src/lib/libbsp/sparc/shared/can/occan.c
Joel Sherrill 81a54e64f7 2007-09-19 Daniel Hellstrom <daniel@gaisler.com> 
* shared/can/occan.c: Fix Reenable command and fix typo.
2007-09-19 15:14:52 +00:00

1920 lines
54 KiB
C
Raw Blame History

/* OC_CAN driver
*
* COPYRIGHT (c) 2007.
* Gaisler Research.
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*
* Author: Daniel Hellström, Gaisler Research AB, www.gaisler.com
*/
#include <rtems/libio.h>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <bsp.h>
#include <rtems/bspIo.h> /* printk */
#include <leon.h>
#include <ambapp.h>
#include <occan.h>
/* RTEMS -> ERRNO decoding table
rtems_assoc_t errno_assoc[] = {
{ "OK", RTEMS_SUCCESSFUL, 0 },
{ "BUSY", RTEMS_RESOURCE_IN_USE, EBUSY },
{ "INVALID NAME", RTEMS_INVALID_NAME, EINVAL },
{ "NOT IMPLEMENTED", RTEMS_NOT_IMPLEMENTED, ENOSYS },
{ "TIMEOUT", RTEMS_TIMEOUT, ETIMEDOUT },
{ "NO MEMORY", RTEMS_NO_MEMORY, ENOMEM },
{ "NO DEVICE", RTEMS_UNSATISFIED, ENODEV },
{ "INVALID NUMBER", RTEMS_INVALID_NUMBER, EBADF},
{ "NOT RESOURCE OWNER", RTEMS_NOT_OWNER_OF_RESOURCE, EPERM},
{ "IO ERROR", RTEMS_IO_ERROR, EIO},
{ 0, 0, 0 },
};
*/
/*
#undef DEBUG
#undef DEBUG_EXTRA
#undef DEBUG_PRINT_REGMAP
*/
/* default to byte regs */
#ifndef OCCAN_WORD_REGS
#define OCCAN_BYTE_REGS
#else
#undef OCCAN_BYTE_REGS
#endif
#ifndef OCCAN_PREFIX
#define OCCAN_PREFIX(name) occan##name
#endif
#if !defined(OCCAN_DEVNAME) || !defined(OCCAN_DEVNAME_NO)
#undef OCCAN_DEVNAME
#undef OCCAN_DEVNAME_NO
#define OCCAN_DEVNAME "/dev/occan0"
#define OCCAN_DEVNAME_NO(devstr,no) ((devstr)[10]='0'+(no))
#endif
#ifndef OCCAN_REG_INT
#define OCCAN_REG_INT(handler,irq,arg) set_vector(handler,irq+0x10,1)
#undef OCCAN_DEFINE_INTHANDLER
#define OCCAN_DEFINE_INTHANDLER
#endif
/* Default to 40MHz system clock */
/*#ifndef SYS_FREQ_HZ
#define SYS_FREQ_HZ 40000000
#endif*/
#define OCCAN_WORD_REG_OFS 0x80
#define OCCAN_NCORE_OFS 0x100
#define DEFAULT_CLKDIV 0x7
#define DEFAULT_EXTENDED_MODE 1
#define DEFAULT_RX_FIFO_LEN 64
#define DEFAULT_TX_FIFO_LEN 64
/* not implemented yet */
#undef REDUNDANT_CHANNELS
/* Define common debug macros */
#ifdef DEBUG
#define DBG(fmt, vargs...) printk(fmt, ## vargs )
#else
#define DBG(fmt, vargs...)
#endif
/* fifo interface */
typedef struct {
int cnt;
int ovcnt; /* overwrite count */
int full; /* 1 = base contain cnt CANMsgs, tail==head */
CANMsg *tail, *head;
CANMsg *base;
char fifoarea[0];
} occan_fifo;
/* PELICAN */
#ifdef OCCAN_BYTE_REGS
typedef struct {
unsigned char
mode,
cmd,
status,
intflags,
inten,
resv0,
bustim0,
bustim1,
unused0[2],
resv1,
arbcode,
errcode,
errwarn,
rx_err_cnt,
tx_err_cnt,
rx_fi_xff; /* this is also acceptance code 0 in reset mode */
union{
struct {
unsigned char id[2];
unsigned char data[8];
unsigned char next_in_fifo[2];
} rx_sff;
struct {
unsigned char id[4];
unsigned char data[8];
} rx_eff;
struct {
unsigned char id[2];
unsigned char data[8];
unsigned char unused[2];
} tx_sff;
struct {
unsigned char id[4];
unsigned char data[8];
} tx_eff;
struct {
unsigned char code[3];
unsigned char mask[4];
} rst_accept;
} msg;
unsigned char rx_msg_cnt;
unsigned char unused1;
unsigned char clkdiv;
} pelican_regs;
#else
typedef struct {
unsigned char
mode, unused0[3],
cmd, unused1[3],
status, unused2[3],
intflags, unused3[3],
inten, unused4[3],
resv0, unused5[3],
bustim0, unused6[3],
bustim1, unused7[3],
unused8[8],
resv1,unused9[3],
arbcode,unused10[3],
errcode,unused11[3],
errwarn,unused12[3],
rx_err_cnt,unused13[3],
tx_err_cnt,unused14[3],
rx_fi_xff, unused15[3]; /* this is also acceptance code 0 in reset mode */
/* make sure to use pointers when writing (byte access) to these registers */
union{
struct {
unsigned int id[2];
unsigned int data[8];
unsigned int next_in_fifo[2];
} rx_sff;
struct {
unsigned int id[4];
unsigned int data[8];
} rx_eff;
struct {
unsigned int id[2];
unsigned int data[8];
} tx_sff;
struct {
unsigned int id[4];
unsigned int data[8];
} tx_eff;
struct {
unsigned int code[3];
unsigned int mask[4];
} rst_accept;
} msg;
unsigned char rx_msg_cnt,unused16[3];
unsigned char unused17[4];
unsigned char clkdiv,unused18[3];
} pelican_regs;
#endif
#define MAX_TSEG1 7
#define MAX_TSEG2 15
#if 0
typedef struct {
unsigned char brp;
unsigned char sjw;
unsigned char tseg1;
unsigned char tseg2;
unsigned char sam;
} occan_speed_regs;
#endif
typedef struct {
unsigned char btr0;
unsigned char btr1;
} occan_speed_regs;
typedef struct {
/* hardware shortcuts */
pelican_regs *regs;
int irq;
occan_speed_regs timing;
int channel; /* 0=default, 1=second bus */
int single_mode;
/* driver state */
rtems_id devsem;
rtems_id txsem;
rtems_id rxsem;
int open;
int started;
int rxblk;
int txblk;
unsigned int status;
occan_stats stats;
/* rx&tx fifos */
occan_fifo *rxfifo;
occan_fifo *txfifo;
/* Config */
unsigned int speed; /* speed in HZ */
unsigned char acode[4];
unsigned char amask[4];
} occan_priv;
/********** FIFO INTERFACE **********/
static void occan_fifo_put(occan_fifo *fifo);
static CANMsg *occan_fifo_put_claim(occan_fifo *fifo, int force);
static occan_fifo *occan_fifo_create(int cnt);
static void occan_fifo_free(occan_fifo *fifo);
static int occan_fifo_full(occan_fifo *fifo);
static int occan_fifo_empty(occan_fifo *fifo);
static void occan_fifo_get(occan_fifo *fifo);
static CANMsg *occan_fifo_claim_get(occan_fifo *fifo);
/**** Hardware related Interface ****/
static int occan_calc_speedregs(unsigned int clock_hz, unsigned int rate, occan_speed_regs *result);
static int occan_set_speedregs(occan_priv *priv, occan_speed_regs *timing);
static int pelican_speed_auto(occan_priv *priv);
static void pelican_init(occan_priv *priv);
static void pelican_open(occan_priv *priv);
static int pelican_start(occan_priv *priv);
static void pelican_stop(occan_priv *priv);
static int pelican_send(occan_priv *can, CANMsg *msg);
static void pelican_set_accept(occan_priv *priv, unsigned char *acode, unsigned char *amask);
static void occan_interrupt(occan_priv *can);
#ifdef DEBUG_PRINT_REGMAP
static void pelican_regadr_print(pelican_regs *regs);
#endif
/***** Driver related interface *****/
static rtems_device_driver occan_ioctl(rtems_device_major_number major, rtems_device_minor_number minor, void *arg);
static rtems_device_driver occan_write(rtems_device_major_number major, rtems_device_minor_number minor, void *arg);
static rtems_device_driver occan_read(rtems_device_major_number major, rtems_device_minor_number minor, void *arg);
static rtems_device_driver occan_close(rtems_device_major_number major, rtems_device_minor_number minor, void *arg);
static rtems_device_driver occan_open(rtems_device_major_number major, rtems_device_minor_number minor, void *arg);
static rtems_device_driver occan_initialize(rtems_device_major_number major, rtems_device_minor_number unused, void *arg);
#ifdef OCCAN_DEFINE_INTHANDLER
static void occan_interrupt_handler(rtems_vector_number v);
#endif
static int can_cores;
static occan_priv *cans;
static amba_confarea_type *amba_bus;
static unsigned int sys_freq_hz;
/* Read byte bypassing */
#ifdef OCCAN_DONT_BYPASS_CACHE
#define READ_REG(address) (*(unsigned char *)(address))
#else
/* Bypass cache */
#define READ_REG(address) _OCCAN_REG_READ((unsigned int)(address))
static __inline__ unsigned char _OCCAN_REG_READ(unsigned int addr) {
unsigned char tmp;
asm(" lduba [%1]1, %0 "
: "=r"(tmp)
: "r"(addr)
);
return tmp;
}
#endif
#define WRITE_REG(address,data) (*(unsigned char *)(address) = (data))
/* Mode register bit definitions */
#define PELICAN_MOD_RESET 0x1
#define PELICAN_MOD_LISTEN 0x2
#define PELICAN_MOD_SELFTEST 0x4
#define PELICAN_MOD_ACCEPT 0x8
/* Command register bit definitions */
#define PELICAN_CMD_TXREQ 0x1
#define PELICAN_CMD_ABORT 0x2
#define PELICAN_CMD_RELRXBUF 0x4
#define PELICAN_CMD_CLRDOVR 0x8
#define PELICAN_CMD_SELFRXRQ 0x10
/* Status register bit definitions */
#define PELICAN_STAT_RXBUF 0x1
#define PELICAN_STAT_DOVR 0x2
#define PELICAN_STAT_TXBUF 0x4
#define PELICAN_STAT_TXOK 0x8
#define PELICAN_STAT_RX 0x10
#define PELICAN_STAT_TX 0x20
#define PELICAN_STAT_ERR 0x40
#define PELICAN_STAT_BUS 0x80
/* Interrupt register bit definitions */
#define PELICAN_IF_RX 0x1
#define PELICAN_IF_TX 0x2
#define PELICAN_IF_ERRW 0x4
#define PELICAN_IF_DOVR 0x8
#define PELICAN_IF_ERRP 0x20
#define PELICAN_IF_ARB 0x40
#define PELICAN_IF_BUS 0x80
/* Interrupt Enable register bit definitions */
#define PELICAN_IE_RX 0x1
#define PELICAN_IE_TX 0x2
#define PELICAN_IE_ERRW 0x4
#define PELICAN_IE_DOVR 0x8
#define PELICAN_IE_ERRP 0x20
#define PELICAN_IE_ARB 0x40
#define PELICAN_IE_BUS 0x80
/* Arbitration lost capture register bit definitions */
#define PELICAN_ARB_BITS 0x1f
/* register bit definitions */
#define PELICAN_ECC_CODE_BIT 0x00
#define PELICAN_ECC_CODE_FORM 0x40
#define PELICAN_ECC_CODE_STUFF 0x80
#define PELICAN_ECC_CODE_OTHER 0xc0
#define PELICAN_ECC_CODE 0xc0
#define PELICAN_ECC_DIR 0x20
#define PELICAN_ECC_SEG 0x1f
/* Clock divider register bit definitions */
#define PELICAN_CDR_DIV 0x7
#define PELICAN_CDR_OFF 0x8
#define PELICAN_CDR_MODE 0x80
#define PELICAN_CDR_MODE_PELICAN 0x80
#define PELICAN_CDR_MODE_BITS 7
#define PELICAN_CDR_MODE_BASICAN 0x00
/* register bit definitions */
#define OCCAN_BUSTIM_SJW 0xc0
#define OCCAN_BUSTIM_BRP 0x3f
#define OCCAN_BUSTIM_SJW_BIT 6
#define OCCAN_BUSTIM_SAM 0x80
#define OCCAN_BUSTIM_TSEG2 0x70
#define OCCAN_BUSTIM_TSEG2_BIT 4
#define OCCAN_BUSTIM_TSEG1 0x0f
/* register bit definitions */
/*
#define PELICAN_S_ 0x1
#define PELICAN_S_ 0x2
#define PELICAN_S_ 0x4
#define PELICAN_S_ 0x8
#define PELICAN_S_ 0x10
#define PELICAN_S_ 0x20
#define PELICAN_S_ 0x40
#define PELICAN_S_ 0x80
*/
static void pelican_init(occan_priv *priv){
/* Reset core */
priv->regs->mode = PELICAN_MOD_RESET;
/* wait for core to reset complete */
/*usleep(1);*/
}
static void pelican_open(occan_priv *priv){
unsigned char tmp;
int ret;
/* Set defaults */
priv->speed = OCCAN_SPEED_250K;
/* set acceptance filters to accept all messages */
priv->acode[0] = 0;
priv->acode[1] = 0;
priv->acode[2] = 0;
priv->acode[3] = 0;
priv->amask[0] = 0xff;
priv->amask[1] = 0xff;
priv->amask[2] = 0xff;
priv->amask[3] = 0xff;
/* Set clock divider to extended mode, clkdiv not connected
*/
priv->regs->clkdiv = (1<<PELICAN_CDR_MODE_BITS) | (DEFAULT_CLKDIV & PELICAN_CDR_DIV);
ret = occan_calc_speedregs(sys_freq_hz,priv->speed,&priv->timing);
if ( ret ){
/* failed to set speed for this system freq, try with 50K instead */
priv->speed = OCCAN_SPEED_50K;
occan_calc_speedregs(sys_freq_hz,priv->speed,&priv->timing);
}
/* disable all interrupts */
priv->regs->inten = 0;
/* clear pending interrupts by reading */
tmp = READ_REG(&priv->regs->intflags);
}
static int pelican_start(occan_priv *priv){
unsigned char tmp;
/* Start HW communication */
if ( !priv->rxfifo || !priv->txfifo )
return -1;
/* Clear status bits */
priv->status = 0;
/* clear pending interrupts */
tmp = READ_REG(&priv->regs->intflags);
/* clear error counters */
priv->regs->rx_err_cnt = 0;
priv->regs->tx_err_cnt = 0;
#ifdef REDUNDANT_CHANNELS
if ( (priv->channel == 0) || (priv->channel >= REDUNDANT_CHANNELS) ){
/* Select the first (default) channel */
OCCAN_SET_CHANNEL(priv,0);
}else{
/* set gpio bit, or something */
OCCAN_SET_CHANNEL(priv,priv->channel);
}
#endif
/* set the speed regs of the CAN core */
occan_set_speedregs(priv,&priv->timing);
DBG("OCCAN: start: set timing regs btr0: 0x%x, btr1: 0x%x\n\r",READ_REG(&priv->regs->bustim0),READ_REG(&priv->regs->bustim1));
/* Set default acceptance filter */
pelican_set_accept(priv,priv->acode,priv->amask);
/* turn on interrupts */
priv->regs->inten = PELICAN_IE_RX | PELICAN_IE_TX | PELICAN_IE_ERRW |
PELICAN_IE_ERRP | PELICAN_IE_BUS;
#ifdef DEBUG
/* print setup before starting */
pelican_regs_print(priv->regs);
occan_stat_print(&priv->stats);
#endif
/* core already in reset mode,
* ¤ Exit reset mode
* ¤ Enter Single/Dual mode filtering.
*/
priv->regs->mode = (priv->single_mode << 3);
return 0;
}
static void pelican_stop(occan_priv *priv){
/* stop HW */
#ifdef DEBUG
/* print setup before stopping */
pelican_regs_print(priv->regs);
occan_stat_print(&priv->stats);
#endif
/* put core in reset mode */
priv->regs->mode = PELICAN_MOD_RESET;
/* turn off interrupts */
priv->regs->inten = 0;
priv->status |= OCCAN_STATUS_RESET;
}
/* Try to send message "msg", if hardware txfifo is
* full, then -1 is returned.
*
* Be sure to have disabled CAN interrupts when
* entering this function.
*/
static int pelican_send(occan_priv *can, CANMsg *msg){
unsigned char tmp,status;
pelican_regs *regs = can->regs;
/* is there room in send buffer? */
status = READ_REG(&regs->status);
if ( !(status & PELICAN_STAT_TXBUF) ){
/* tx fifo taken, we have to wait */
return -1;
}
tmp = msg->len & 0xf;
if ( msg->rtr )
tmp |= 0x40;
if ( msg->extended ){
/* Extended Frame */
regs->rx_fi_xff = 0x80 | tmp;
WRITE_REG(&regs->msg.tx_eff.id[0],(msg->id >> (5+8+8)) & 0xff);
WRITE_REG(&regs->msg.tx_eff.id[1],(msg->id >> (5+8)) & 0xff);
WRITE_REG(&regs->msg.tx_eff.id[2],(msg->id >> (5)) & 0xff);
WRITE_REG(&regs->msg.tx_eff.id[3],(msg->id << 3) & 0xf8);
tmp = msg->len;
while(tmp--){
WRITE_REG(&regs->msg.tx_eff.data[tmp],msg->data[tmp]);
}
}else{
/* Standard Frame */
regs->rx_fi_xff = tmp;
WRITE_REG(&regs->msg.tx_sff.id[0],(msg->id >> 3) & 0xff);
WRITE_REG(&regs->msg.tx_sff.id[1],(msg->id << 5) & 0xe0);
tmp = msg->len;
while(tmp--){
WRITE_REG(&regs->msg.tx_sff.data[tmp],msg->data[tmp]);
}
}
/* let HW know of new message */
if ( msg->sshot ){
regs->cmd = PELICAN_CMD_TXREQ | PELICAN_CMD_ABORT;
}else{
/* normal case -- try resend until sent */
regs->cmd = PELICAN_CMD_TXREQ;
}
return 0;
}
static void pelican_set_accept(occan_priv *priv, unsigned char *acode, unsigned char *amask){
unsigned char *acode0, *acode1, *acode2, *acode3;
unsigned char *amask0, *amask1, *amask2, *amask3;
acode0 = &priv->regs->rx_fi_xff;
acode1 = (unsigned char *)&priv->regs->msg.rst_accept.code[0];
acode2 = (unsigned char *)&priv->regs->msg.rst_accept.code[1];
acode3 = (unsigned char *)&priv->regs->msg.rst_accept.code[2];
amask0 = (unsigned char *)&priv->regs->msg.rst_accept.mask[0];
amask1 = (unsigned char *)&priv->regs->msg.rst_accept.mask[1];
amask2 = (unsigned char *)&priv->regs->msg.rst_accept.mask[2];
amask3 = (unsigned char *)&priv->regs->msg.rst_accept.mask[3];
/* Set new mask & code */
*acode0 = acode[0];
*acode1 = acode[1];
*acode2 = acode[2];
*acode3 = acode[3];
*amask0 = amask[0];
*amask1 = amask[1];
*amask2 = amask[2];
*amask3 = amask[3];
}
#ifdef DEBUG
static void pelican_regs_print(pelican_regs *regs){
printk("--- PELICAN 0x%lx ---\n\r",(unsigned int)regs);
printk(" MODE: 0x%02x\n\r",READ_REG(&regs->mode));
printk(" CMD: 0x%02x\n\r",READ_REG(&regs->cmd));
printk(" STATUS: 0x%02x\n\r",READ_REG(&regs->status));
/*printk(" INTFLG: 0x%02x\n\r",READ_REG(&regs->intflags));*/
printk(" INTEN: 0x%02x\n\r",READ_REG(&regs->inten));
printk(" BTR0: 0x%02x\n\r",READ_REG(&regs->bustim0));
printk(" BTR1: 0x%02x\n\r",READ_REG(&regs->bustim1));
printk(" ARBCODE: 0x%02x\n\r",READ_REG(&regs->arbcode));
printk(" ERRCODE: 0x%02x\n\r",READ_REG(&regs->errcode));
printk(" ERRWARN: 0x%02x\n\r",READ_REG(&regs->errwarn));
printk(" RX_ERR_CNT: 0x%02x\n\r",READ_REG(&regs->rx_err_cnt));
printk(" TX_ERR_CNT: 0x%02x\n\r",READ_REG(&regs->tx_err_cnt));
if ( READ_REG(&regs->mode) & PELICAN_MOD_RESET ){
/* in reset mode it is possible to read acceptance filters */
printk(" ACR0: 0x%02x (0x%lx)\n\r",READ_REG(&regs->rx_fi_xff),&regs->rx_fi_xff);
printk(" ACR1: 0x%02x (0x%lx)\n\r",READ_REG(&regs->msg.rst_accept.code[0]),(unsigned int)&regs->msg.rst_accept.code[0]);
printk(" ACR1: 0x%02x (0x%lx)\n\r",READ_REG(&regs->msg.rst_accept.code[1]),(unsigned int)&regs->msg.rst_accept.code[1]);
printk(" ACR1: 0x%02x (0x%lx)\n\r",READ_REG(&regs->msg.rst_accept.code[2]),(unsigned int)&regs->msg.rst_accept.code[2]);
printk(" AMR0: 0x%02x (0x%lx)\n\r",READ_REG(&regs->msg.rst_accept.mask[0]),(unsigned int)&regs->msg.rst_accept.mask[0]);
printk(" AMR1: 0x%02x (0x%lx)\n\r",READ_REG(&regs->msg.rst_accept.mask[1]),(unsigned int)&regs->msg.rst_accept.mask[1]);
printk(" AMR2: 0x%02x (0x%lx)\n\r",READ_REG(&regs->msg.rst_accept.mask[2]),(unsigned int)&regs->msg.rst_accept.mask[2]);
printk(" AMR3: 0x%02x (0x%lx)\n\r",READ_REG(&regs->msg.rst_accept.mask[3]),(unsigned int)&regs->msg.rst_accept.mask[3]);
}else{
printk(" RXFI_XFF: 0x%02x\n\r",READ_REG(&regs->rx_fi_xff));
}
printk(" RX_MSG_CNT: 0x%02x\n\r",READ_REG(&regs->rx_msg_cnt));
printk(" CLKDIV: 0x%02x\n\r",READ_REG(&regs->clkdiv));
printk("-------------------\n\r");
}
#endif
#ifdef DEBUG_PRINT_REGMAP
static void pelican_regadr_print(pelican_regs *regs){
printk("--- PELICAN 0x%lx ---\n\r",(unsigned int)regs);
printk(" MODE: 0x%lx\n\r",(unsigned int)&regs->mode);
printk(" CMD: 0x%lx\n\r",(unsigned int)&regs->cmd);
printk(" STATUS: 0x%lx\n\r",(unsigned int)&regs->status);
/*printk(" INTFLG: 0x%lx\n\r",&regs->intflags);*/
printk(" INTEN: 0x%lx\n\r",(unsigned int)&regs->inten);
printk(" BTR0: 0x%lx\n\r",(unsigned int)&regs->bustim0);
printk(" BTR1: 0x%lx\n\r",(unsigned int)&regs->bustim1);
printk(" ARBCODE: 0x%lx\n\r",(unsigned int)&regs->arbcode);
printk(" ERRCODE: 0x%lx\n\r",(unsigned int)&regs->errcode);
printk(" ERRWARN: 0x%lx\n\r",(unsigned int)&regs->errwarn);
printk(" RX_ERR_CNT: 0x%lx\n\r",(unsigned int)&regs->rx_err_cnt);
printk(" TX_ERR_CNT: 0x%lx\n\r",(unsigned int)&regs->tx_err_cnt);
/* in reset mode it is possible to read acceptance filters */
printk(" RXFI_XFF: 0x%lx\n\r",(unsigned int)&regs->rx_fi_xff);
/* reset registers */
printk(" ACR0: 0x%lx\n\r",(unsigned int)&regs->rx_fi_xff);
printk(" ACR1: 0x%lx\n\r",(unsigned int)&regs->msg.rst_accept.code[0]);
printk(" ACR2: 0x%lx\n\r",(unsigned int)&regs->msg.rst_accept.code[1]);
printk(" ACR3: 0x%lx\n\r",(unsigned int)&regs->msg.rst_accept.code[2]);
printk(" AMR0: 0x%lx\n\r",(unsigned int)&regs->msg.rst_accept.mask[0]);
printk(" AMR1: 0x%lx\n\r",(unsigned int)&regs->msg.rst_accept.mask[1]);
printk(" AMR2: 0x%lx\n\r",(unsigned int)&regs->msg.rst_accept.mask[2]);
printk(" AMR3: 0x%lx\n\r",(unsigned int)&regs->msg.rst_accept.mask[3]);
/* TX Extended */
printk(" EFFTX_ID[0]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_eff.id[0]);
printk(" EFFTX_ID[1]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_eff.id[1]);
printk(" EFFTX_ID[2]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_eff.id[2]);
printk(" EFFTX_ID[3]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_eff.id[3]);
printk(" EFFTX_DATA[0]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_eff.data[0]);
printk(" EFFTX_DATA[1]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_eff.data[1]);
printk(" EFFTX_DATA[2]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_eff.data[2]);
printk(" EFFTX_DATA[3]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_eff.data[3]);
printk(" EFFTX_DATA[4]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_eff.data[4]);
printk(" EFFTX_DATA[5]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_eff.data[5]);
printk(" EFFTX_DATA[6]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_eff.data[6]);
printk(" EFFTX_DATA[7]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_eff.data[7]);
/* RX Extended */
printk(" EFFRX_ID[0]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_eff.id[0]);
printk(" EFFRX_ID[1]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_eff.id[1]);
printk(" EFFRX_ID[2]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_eff.id[2]);
printk(" EFFRX_ID[3]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_eff.id[3]);
printk(" EFFRX_DATA[0]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_eff.data[0]);
printk(" EFFRX_DATA[1]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_eff.data[1]);
printk(" EFFRX_DATA[2]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_eff.data[2]);
printk(" EFFRX_DATA[3]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_eff.data[3]);
printk(" EFFRX_DATA[4]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_eff.data[4]);
printk(" EFFRX_DATA[5]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_eff.data[5]);
printk(" EFFRX_DATA[6]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_eff.data[6]);
printk(" EFFRX_DATA[7]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_eff.data[7]);
/* RX Extended */
printk(" SFFRX_ID[0]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_sff.id[0]);
printk(" SFFRX_ID[1]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_sff.id[1]);
printk(" SFFRX_DATA[0]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_sff.data[0]);
printk(" SFFRX_DATA[1]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_sff.data[1]);
printk(" SFFRX_DATA[2]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_sff.data[2]);
printk(" SFFRX_DATA[3]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_sff.data[3]);
printk(" SFFRX_DATA[4]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_sff.data[4]);
printk(" SFFRX_DATA[5]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_sff.data[5]);
printk(" SFFRX_DATA[6]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_sff.data[6]);
printk(" SFFRX_DATA[7]: 0x%lx\n\r",(unsigned int)&regs->msg.rx_sff.data[7]);
/* TX Extended */
printk(" SFFTX_ID[0]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_sff.id[0]);
printk(" SFFTX_ID[1]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_sff.id[1]);
printk(" SFFTX_DATA[0]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_sff.data[0]);
printk(" SFFTX_DATA[1]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_sff.data[1]);
printk(" SFFTX_DATA[2]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_sff.data[2]);
printk(" SFFTX_DATA[3]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_sff.data[3]);
printk(" SFFTX_DATA[4]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_sff.data[4]);
printk(" SFFTX_DATA[5]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_sff.data[5]);
printk(" SFFTX_DATA[6]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_sff.data[6]);
printk(" SFFTX_DATA[7]: 0x%lx\n\r",(unsigned int)&regs->msg.tx_sff.data[7]);
printk(" RX_MSG_CNT: 0x%lx\n\r",(unsigned int)&regs->rx_msg_cnt);
printk(" CLKDIV: 0x%lx\n\r",(unsigned int)&regs->clkdiv);
printk("-------------------\n\r");
}
#endif
#ifdef DEBUG
static void occan_stat_print(occan_stats *stats){
printk("----Stats----\n\r");
printk("rx_msgs: %d\n\r",stats->rx_msgs);
printk("tx_msgs: %d\n\r",stats->tx_msgs);
printk("err_warn: %d\n\r",stats->err_warn);
printk("err_dovr: %d\n\r",stats->err_dovr);
printk("err_errp: %d\n\r",stats->err_errp);
printk("err_arb: %d\n\r",stats->err_arb);
printk("err_bus: %d\n\r",stats->err_bus);
printk("Int cnt: %d\n\r",stats->ints);
printk("tx_buf_err: %d\n\r",stats->tx_buf_error);
printk("-------------\n\r");
}
#endif
/* This function calculates BTR0 BTR1 values for a given bitrate.
* Heavily based on mgt_mscan_bitrate() from peak driver, which
* in turn is based on work by Arnaud Westenberg.
*
* Set communication parameters.
* baud rate in Hz
* input clock frequency of can core in Hz (system frequency)
* sjw synchronization jump width (0-3) prescaled clock cycles
* sampl_pt sample point in % (0-100) sets (TSEG1+2)/(TSEG1+TSEG2+3)
* ratio
*/
static int occan_calc_speedregs(unsigned int clock_hz, unsigned int rate, occan_speed_regs *result){
int best_error = 1000000000;
int error;
int best_tseg=0, best_brp=0, best_rate=0, brp=0;
int tseg=0, tseg1=0, tseg2=0;
int sjw = 0;
int clock = clock_hz / 2;
int sampl_pt = 90;
if ( (rate<10000) || (rate>1000000) ){
/* invalid speed mode */
return -1;
}
/* find best match, return -2 if no good reg
* combination is available for this frequency */
/* some heuristic specials */
if (rate > ((1000000 + 500000) / 2))
sampl_pt = 75;
if (rate < ((12500 + 10000) / 2))
sampl_pt = 75;
if (rate < ((100000 + 125000) / 2))
sjw = 1;
/* tseg even = round down, odd = round up */
for (tseg = (0 + 0 + 2) * 2;
tseg <= (MAX_TSEG2 + MAX_TSEG1 + 2) * 2 + 1;
tseg++)
{
brp = clock / ((1 + tseg / 2) * rate) + tseg % 2;
if ((brp == 0) || (brp > 64))
continue;
error = rate - clock / (brp * (1 + tseg / 2));
if (error < 0)
{
error = -error;
}
if (error <= best_error)
{
best_error = error;
best_tseg = tseg/2;
best_brp = brp-1;
best_rate = clock/(brp*(1+tseg/2));
}
}
if (best_error && (rate / best_error < 10))
{
printk("OCCAN: bitrate %d is not possible with %d Hz clock\n\r",rate, clock);
return -2;
}else if ( !result )
return 0; /* nothing to store result in, but a valid bitrate can be calculated */
tseg2 = best_tseg - (sampl_pt * (best_tseg + 1)) / 100;
if (tseg2 < 0)
{
tseg2 = 0;
}
if (tseg2 > MAX_TSEG2)
{
tseg2 = MAX_TSEG2;
}
tseg1 = best_tseg - tseg2 - 2;
if (tseg1 > MAX_TSEG1)
{
tseg1 = MAX_TSEG1;
tseg2 = best_tseg - tseg1 - 2;
}
/*
result->sjw = sjw;
result->brp = best_brp;
result->tseg1 = tseg1;
result->tseg2 = tseg2;
*/
result->btr0 = (sjw<<OCCAN_BUSTIM_SJW_BIT) | (best_brp&OCCAN_BUSTIM_BRP);
result->btr1 = (0<<7) | (tseg2<<OCCAN_BUSTIM_TSEG2_BIT) | tseg1;
return 0;
}
static int occan_set_speedregs(occan_priv *priv, occan_speed_regs *timing){
if ( !timing || !priv || !priv->regs)
return -1;
priv->regs->bustim0 = timing->btr0;
priv->regs->bustim1 = timing->btr1;
/*
priv->regs->bustim0 = (timing->sjw<<OCCAN_BUSTIM_SJW_BIT) | (timing->brp&OCCAN_BUSTIM_BRP);
priv->regs->bustim1 = (timing->sam<<7) | (timing->tseg2<<OCCAN_BUSTIM_TSEG2_BIT) | timing->tseg1;
*/
return 0;
}
#if 0
static unsigned int pelican_speed_auto_steplist [] = {
OCCAN_SPEED_500K,
OCCAN_SPEED_250K,
OCCAN_SPEED_125K,
OCCAN_SPEED_75K,
OCCAN_SPEED_50K,
OCCAN_SPEED_25K,
OCCAN_SPEED_10K,
0
};
#endif
static int pelican_speed_auto(occan_priv *priv){
return -1;
#if 0
int i=0;
occan_speed_regs timing;
unsigned int speed;
unsigned char tmp;
while ( (speed=pelican_speed_auto_steplist[i]) > 0){
/* Reset core */
priv->regs->mode = PELICAN_MOD_RESET;
/* tell int handler about the auto speed detection test */
/* wait for a moment (10ms) */
/*usleep(10000);*/
/* No acceptance filter */
pelican_set_accept(priv);
/* calc timing params for this */
if ( occan_calc_speedregs(sys_freq_hz,speed,&timing) ){
/* failed to get good timings for this frequency
* test with next
*/
continue;
}
timing.sam = 0;
/* set timing params for this speed */
occan_set_speedregs(priv,&timing);
/* Empty previous messages in hardware RX fifo */
/*
while( READ_REG(&priv->regs->) ){
}
*/
/* Clear pending interrupts */
tmp = READ_REG(&priv->regs->intflags);
/* enable RX & ERR interrupt */
priv->regs->inten =
/* Get out of reset state */
priv->regs->mode = PELICAN_MOD_LISTEN;
/* wait for frames or errors */
while(1){
/* sleep 10ms */
}
}
#endif
}
static rtems_device_driver occan_initialize(rtems_device_major_number major, rtems_device_minor_number unused, void *arg){
int dev_cnt,minor,subcore_cnt,devi,subi,subcores;
amba_ahb_device ambadev;
occan_priv *can;
char fs_name[20];
rtems_status_code status;
strcpy(fs_name,OCCAN_DEVNAME);
/* find device on amba bus */
dev_cnt = amba_get_number_ahbslv_devices(amba_bus,VENDOR_GAISLER,GAISLER_OCCAN);
if ( dev_cnt < 1 ){
/* Failed to find any CAN cores! */
printk("OCCAN: Failed to find any CAN cores\n\r");
return -1;
}
/* Detect System Frequency from initialized timer */
#ifndef SYS_FREQ_HZ
#if defined(LEON3)
/* LEON3: find timer address via AMBA Plug&Play info */
{
amba_apb_device gptimer;
LEON3_Timer_Regs_Map *tregs;
if ( amba_find_apbslv(&amba_conf,VENDOR_GAISLER,GAISLER_GPTIMER,&gptimer) == 1 ){
tregs = (LEON3_Timer_Regs_Map *)gptimer.start;
sys_freq_hz = (tregs->scaler_reload+1)*1000*1000;
DBG("OCCAN: detected %dHZ system frequency\n\r",sys_freq_hz);
}else{
sys_freq_hz = 40000000; /* Default to 40MHz */
printk("OCCAN: Failed to detect system frequency\n\r");
}
}
#elif defined(LEON2)
/* LEON2: use hardcoded address to get to timer */
{
LEON_Register_Map *regs = (LEON_Register_Map *)0x80000000;
sys_freq_hz = (regs->Scaler_Reload+1)*1000*1000;
}
#else
#error CPU not supported for OC_CAN driver
#endif
#else
/* Use hardcoded frequency */
sys_freq_hz = SYS_FREQ_HZ;
#endif
DBG("OCCAN: Detected %dHz system frequency\n\r",sys_freq_hz);
/* OCCAN speciality:
* Mulitple cores are supported through the same amba AHB interface.
* The number of "sub cores" can be detected by decoding the AMBA
* Plug&Play version information. verion = ncores. A maximum of 8
* sub cores are supported, each separeated with 0x100 inbetween.
*
* Now, lets detect sub cores.
*/
for(subcore_cnt=devi=0; devi<dev_cnt; devi++){
amba_find_next_ahbslv(amba_bus,VENDOR_GAISLER,GAISLER_OCCAN,&ambadev,devi);
subcore_cnt += (ambadev.ver & 0x7)+1;
}
printk("OCCAN: Found %d devs, totally %d sub cores\n\r",dev_cnt,subcore_cnt);
/* allocate memory for cores */
can_cores = subcore_cnt;
cans = calloc(subcore_cnt*sizeof(occan_priv),1);
minor=0;
for(devi=0; devi<dev_cnt; devi++){
/* Get AHB device info */
amba_find_next_ahbslv(amba_bus,VENDOR_GAISLER,GAISLER_OCCAN,&ambadev,devi);
subcores = (ambadev.ver & 0x7)+1;
DBG("OCCAN: on dev %d found %d sub cores\n\r",devi,subcores);
/* loop all subcores, at least 1 */
for(subi=0; subi<subcores; subi++){
can = &cans[minor];
#ifdef OCCAN_BYTE_REGS
/* regs is byte regs */
can->regs = (void *)ambadev.start[0] + OCCAN_NCORE_OFS*subi;
#else
/* regs is word regs, accessed 0x100 from base address */
can->regs = (void *)(ambadev.start[0] + OCCAN_NCORE_OFS*subi+ OCCAN_WORD_REG_OFS);
#endif
/* remember IRQ number */
can->irq = ambadev.irq+subi;
/* bind filesystem name to device */
OCCAN_DEVNAME_NO(fs_name,minor);
printk("OCCAN: Registering %s to [%d %d] @ 0x%lx irq %d\n\r",fs_name,major,minor,(unsigned int)can->regs,can->irq);
status = rtems_io_register_name(fs_name, major, minor);
if (RTEMS_SUCCESSFUL != status )
rtems_fatal_error_occurred(status);
/* initialize software */
can->open = 0;
can->rxfifo = NULL;
can->txfifo = NULL;
status = rtems_semaphore_create(
rtems_build_name('C', 'd', 'v', '0'+minor),
1,
RTEMS_FIFO | RTEMS_SIMPLE_BINARY_SEMAPHORE | RTEMS_NO_INHERIT_PRIORITY | \
RTEMS_NO_PRIORITY_CEILING,
0,
&can->devsem);
if ( status != RTEMS_SUCCESSFUL ){
printk("OCCAN: Failed to create dev semaphore for minor %d, (%d)\n\r",minor,status);
return RTEMS_UNSATISFIED;
}
status = rtems_semaphore_create(
rtems_build_name('C', 't', 'x', '0'+minor),
0,
RTEMS_FIFO | RTEMS_SIMPLE_BINARY_SEMAPHORE | RTEMS_NO_INHERIT_PRIORITY | \
RTEMS_NO_PRIORITY_CEILING,
0,
&can->txsem);
if ( status != RTEMS_SUCCESSFUL ){
printk("OCCAN: Failed to create tx semaphore for minor %d, (%d)\n\r",minor,status);
return RTEMS_UNSATISFIED;
}
status = rtems_semaphore_create(
rtems_build_name('C', 'r', 'x', '0'+minor),
0,
RTEMS_FIFO | RTEMS_SIMPLE_BINARY_SEMAPHORE | RTEMS_NO_INHERIT_PRIORITY | \
RTEMS_NO_PRIORITY_CEILING,
0,
&can->rxsem);
if ( status != RTEMS_SUCCESSFUL ){
printk("OCCAN: Failed to create rx semaphore for minor %d, (%d)\n\r",minor,status);
return RTEMS_UNSATISFIED;
}
/* hardware init/reset */
pelican_init(can);
/* Setup interrupt handler for each channel */
OCCAN_REG_INT(OCCAN_PREFIX(_interrupt_handler), can->irq, can);
minor++;
#ifdef DEBUG_PRINT_REGMAP
pelican_regadr_print(can->regs);
#endif
}
}
return RTEMS_SUCCESSFUL;
}
static rtems_device_driver occan_open(rtems_device_major_number major, rtems_device_minor_number minor, void *arg){
occan_priv *can;
DBG("OCCAN: Opening %d\n\r",minor);
if ( minor >= can_cores )
return RTEMS_UNSATISFIED; /* NODEV */
/* get can device */
can = &cans[minor];
/* already opened? */
rtems_semaphore_obtain(can->devsem,RTEMS_WAIT, RTEMS_NO_TIMEOUT);
if ( can->open ){
rtems_semaphore_release(can->devsem);
return RTEMS_RESOURCE_IN_USE; /* EBUSY */
}
can->open = 1;
rtems_semaphore_release(can->devsem);
/* allocate fifos */
can->rxfifo = occan_fifo_create(DEFAULT_RX_FIFO_LEN);
if ( !can->rxfifo ){
can->open = 0;
return RTEMS_NO_MEMORY; /* ENOMEM */
}
can->txfifo = occan_fifo_create(DEFAULT_TX_FIFO_LEN);
if ( !can->txfifo ){
occan_fifo_free(can->rxfifo);
can->rxfifo= NULL;
can->open = 0;
return RTEMS_NO_MEMORY; /* ENOMEM */
}
DBG("OCCAN: Opening %d success\n\r",minor);
can->started = 0;
can->channel = 0; /* Default to first can link */
can->txblk = 1; /* Default to Blocking mode */
can->rxblk = 1; /* Default to Blocking mode */
can->single_mode = 1; /* single mode acceptance filter */
/* reset stat counters */
memset(&can->stats,0,sizeof(occan_stats));
/* HW must be in reset mode here (close and initializes resets core...)
*
* 1. set default modes/speeds
*/
pelican_open(can);
return RTEMS_SUCCESSFUL;
}
static rtems_device_driver occan_close(rtems_device_major_number major, rtems_device_minor_number minor, void *arg){
occan_priv *can = &cans[minor];
DBG("OCCAN: Closing %d\n\r",minor);
/* stop if running */
if ( can->started )
pelican_stop(can);
/* Enter Reset Mode */
can->regs->mode = PELICAN_MOD_RESET;
/* free fifo memory */
occan_fifo_free(can->rxfifo);
occan_fifo_free(can->txfifo);
can->rxfifo = NULL;
can->txfifo = NULL;
return RTEMS_SUCCESSFUL;
}
static rtems_device_driver occan_read(rtems_device_major_number major, rtems_device_minor_number minor, void *arg){
occan_priv *can = &cans[minor];
rtems_libio_rw_args_t *rw_args=(rtems_libio_rw_args_t *) arg;
CANMsg *dstmsg, *srcmsg;
rtems_interrupt_level oldLevel;
int left;
if ( !can->started ){
DBG("OCCAN: cannot read from minor %d when not started\n\r",minor);
return RTEMS_RESOURCE_IN_USE; /* -EBUSY*/
}
/* does at least one message fit */
left = rw_args->count;
if ( left < sizeof(CANMsg) ){
DBG("OCCAN: minor %d length of buffer must be at least %d, our is %d\n\r",minor,sizeof(CANMsg),left);
return RTEMS_INVALID_NAME; /* -EINVAL */
}
/* get pointer to start where to put CAN messages */
dstmsg = (CANMsg *)rw_args->buffer;
if ( !dstmsg ){
DBG("OCCAN: minor %d read: input buffer is NULL\n\r",minor);
return RTEMS_INVALID_NAME; /* -EINVAL */
}
while (left >= sizeof(CANMsg) ){
/* turn off interrupts */
rtems_interrupt_disable(oldLevel);
/* A bus off interrupt may have occured after checking can->started */
if ( can->status & OCCAN_STATUS_ERR_BUSOFF ){
rtems_interrupt_enable(oldLevel);
DBG("OCCAN: read is cancelled due to a BUS OFF error\n\r");
rw_args->bytes_moved = rw_args->count-left;
return RTEMS_IO_ERROR; /* EIO */
}
srcmsg = occan_fifo_claim_get(can->rxfifo);
if ( !srcmsg ){
/* no more messages in reception fifo.
* Wait for incoming packets only if in
* blocking mode AND no messages been
* read before.
*/
if ( !can->rxblk || (left != rw_args->count) ){
/* turn on interrupts again */
rtems_interrupt_enable(oldLevel);
break;
}
/* turn on interrupts again */
rtems_interrupt_enable(oldLevel);
DBG("OCCAN: Waiting for RX int\n\r");
/* wait for incomming messages */
rtems_semaphore_obtain(can->rxsem,RTEMS_WAIT,RTEMS_NO_TIMEOUT);
/* did we get woken up by a BUS OFF error? */
if ( can->status & OCCAN_STATUS_ERR_BUSOFF ){
DBG("OCCAN: Blocking read got woken up by BUS OFF error\n\r");
/* At this point it should not matter how many messages we handled */
rw_args->bytes_moved = rw_args->count-left;
return RTEMS_IO_ERROR; /* EIO */
}
/* no errors detected, it must be a message */
continue;
}
/* got message, copy it to userspace buffer */
*dstmsg = *srcmsg;
/* Return borrowed message, RX interrupt can use it again */
occan_fifo_get(can->rxfifo);
/* turn on interrupts again */
rtems_interrupt_enable(oldLevel);
/* increase pointers */
left -= sizeof(CANMsg);
dstmsg++;
}
/* save number of read bytes. */
rw_args->bytes_moved = rw_args->count-left;
if ( rw_args->bytes_moved == 0 ){
DBG("OCCAN: minor %d read would block, returning\n\r",minor);
return RTEMS_TIMEOUT; /* ETIMEDOUT should be EAGAIN/EWOULDBLOCK */
}
return RTEMS_SUCCESSFUL;
}
static rtems_device_driver occan_write(rtems_device_major_number major, rtems_device_minor_number minor, void *arg){
occan_priv *can = &cans[minor];
rtems_libio_rw_args_t *rw_args=(rtems_libio_rw_args_t *) arg;
CANMsg *msg,*fifo_msg;
rtems_interrupt_level oldLevel;
int left;
DBG("OCCAN: Writing %d bytes from 0x%lx (%d)\n\r",rw_args->count,rw_args->buffer,sizeof(CANMsg));
if ( !can->started )
return RTEMS_RESOURCE_IN_USE; /* EBUSY */
left = rw_args->count;
if ( (left < sizeof(CANMsg)) || (!rw_args->buffer) ){
return RTEMS_INVALID_NAME; /* EINVAL */
}
msg = (CANMsg *)rw_args->buffer;
/* limit CAN message length to 8 */
msg->len = (msg->len > 8) ? 8 : msg->len;
#ifdef DEBUG_VERBOSE
pelican_regs_print(can->regs);
occan_stat_print(&can->stats);
#endif
/* turn off interrupts */
rtems_interrupt_disable(oldLevel);
/* A bus off interrupt may have occured after checking can->started */
if ( can->status & OCCAN_STATUS_ERR_BUSOFF ){
rtems_interrupt_enable(oldLevel);
rw_args->bytes_moved = 0;
return RTEMS_IO_ERROR; /* EIO */
}
/* If no messages in software tx fifo, we will
* try to send first message by putting it directly
* into the HW TX fifo.
*/
if ( occan_fifo_empty(can->txfifo) ){
/*pelican_regs_print(cans[minor+1].regs);*/
if ( !pelican_send(can,msg) ) {
/* First message put directly into HW TX fifo
* This will turn TX interrupt on.
*/
left -= sizeof(CANMsg);
msg++;
/* bump stat counters */
can->stats.tx_msgs++;
DBG("OCCAN: Sending direct via HW\n\r");
}
}
/* Put messages into software fifo */
while ( left >= sizeof(CANMsg) ){
/* limit CAN message length to 8 */
msg->len = (msg->len > 8) ? 8 : msg->len;
fifo_msg = occan_fifo_put_claim(can->txfifo,0);
if ( !fifo_msg ){
DBG("OCCAN: FIFO is full\n\r");
/* Block only if no messages previously sent
* and no in blocking mode
*/
if ( !can->txblk || (left != rw_args->count) )
break;
/* turn on interupts again and wait
INT_ON
WAIT FOR FREE BUF;
INT_OFF;
CHECK_IF_FIFO_EMPTY ==> SEND DIRECT VIA HW;
*/
rtems_interrupt_enable(oldLevel);
DBG("OCCAN: Waiting for tx int\n\r");
rtems_semaphore_obtain(can->txsem, RTEMS_WAIT, RTEMS_NO_TIMEOUT);
/* did we get woken up by a BUS OFF error? */
if ( can->status & OCCAN_STATUS_ERR_BUSOFF ){
DBG("OCCAN: Blocking write got woken up by BUS OFF error\n\r");
/* At this point it should not matter how many messages we handled */
rw_args->bytes_moved = rw_args->count-left;
return RTEMS_IO_ERROR; /* EIO */
}
rtems_interrupt_disable(oldLevel);
if ( occan_fifo_empty(can->txfifo) ){
if ( !pelican_send(can,msg) ) {
/* First message put directly into HW TX fifo
* This will turn TX interrupt on.
*/
left -= sizeof(CANMsg);
msg++;
/* bump stat counters */
can->stats.tx_msgs++;
DBG("OCCAN: Sending direct2 via HW\n\r");
}
}
continue;
}
/* copy message into fifo area */
*fifo_msg = *msg;
/* tell interrupt handler about the message */
occan_fifo_put(can->txfifo);
DBG("OCCAN: Put info fifo SW\n\r");
/* Prepare insert of next message */
msg++;
left-=sizeof(CANMsg);
}
rtems_interrupt_enable(oldLevel);
rw_args->bytes_moved = rw_args->count-left;
DBG("OCCAN: Sent %d\n\r",rw_args->bytes_moved);
if ( left == rw_args->count )
return RTEMS_TIMEOUT; /* ETIMEDOUT should be EAGAIN/EWOULDBLOCK */
return RTEMS_SUCCESSFUL;
}
static rtems_device_driver occan_ioctl(rtems_device_major_number major, rtems_device_minor_number minor, void *arg){
int ret;
occan_speed_regs timing;
occan_priv *can = &cans[minor];
unsigned int speed;
rtems_libio_ioctl_args_t *ioarg = (rtems_libio_ioctl_args_t *) arg;
struct occan_afilter *afilter;
occan_stats *dststats;
unsigned int rxcnt,txcnt;
DBG("OCCAN: IOCTL %d\n\r",ioarg->command);
ioarg->ioctl_return = 0;
switch(ioarg->command){
case OCCAN_IOC_SET_SPEED:
/* cannot change speed during run mode */
if ( can->started )
return RTEMS_RESOURCE_IN_USE; /* EBUSY */
/* get speed rate from argument */
speed = (unsigned int)ioarg->buffer;
ret = occan_calc_speedregs(sys_freq_hz,speed,&timing);
if ( ret )
return RTEMS_INVALID_NAME; /* EINVAL */
/* set the speed regs of the CAN core */
/* occan_set_speedregs(can,timing); */
/* save timing/speed */
can->speed = speed;
can->timing = timing;
break;
case OCCAN_IOC_SET_BTRS:
/* Set BTR registers manually
* Read OCCAN Manual.
*/
if ( can->started )
return RTEMS_RESOURCE_IN_USE; /* EBUSY */
can->speed = 0; /* custom */
can->timing.btr1 = (unsigned int)ioarg->buffer & 0xff;
can->timing.btr0 = ((unsigned int)ioarg->buffer>>8) & 0xff;
/*
can->timing.sjw = (btr0 >> OCCAN_BUSTIM_SJW_BIT) & 0x3;
can->timing.brp = btr0 & OCCAN_BUSTIM_BRP;
can->timing.tseg1 = btr1 & 0xf;
can->timing.tseg2 = (btr1 >> OCCAN_BUSTIM_TSEG2_BIT) & 0x7;
can->timing.sam = (btr1 >> 7) & 0x1;
*/
break;
case OCCAN_IOC_SPEED_AUTO:
return RTEMS_NOT_IMPLEMENTED;
if ( can->started )
return RTEMS_RESOURCE_IN_USE; /* EBUSY */
if ( (speed=pelican_speed_auto(can)) < 0 ){
/* failed */
return RTEMS_IO_ERROR;
}
/* set new speed */
can->speed = speed;
if ( (int *)ioarg->buffer ){
*(int *)ioarg->buffer = speed;
}
return RTEMS_SUCCESSFUL;
break;
case OCCAN_IOC_SET_BUFLEN:
/* set rx & tx fifo buffer length */
if ( can->started )
return RTEMS_RESOURCE_IN_USE; /* EBUSY */
rxcnt = (unsigned int)ioarg->buffer & 0x0000ffff;
txcnt = (unsigned int)ioarg->buffer >> 16;
occan_fifo_free(can->rxfifo);
occan_fifo_free(can->txfifo);
/* allocate new buffers */
can->rxfifo = occan_fifo_create(rxcnt);
can->txfifo = occan_fifo_create(txcnt);
if ( !can->rxfifo || !can->txfifo )
return RTEMS_NO_MEMORY; /* ENOMEM */
break;
case OCCAN_IOC_GET_CONF:
return RTEMS_NOT_IMPLEMENTED;
break;
case OCCAN_IOC_GET_STATS:
dststats = (occan_stats *)ioarg->buffer;
if ( !dststats )
return RTEMS_INVALID_NAME; /* EINVAL */
/* copy data stats into userspace buffer */
if ( can->rxfifo )
can->stats.rx_sw_dovr = can->rxfifo->ovcnt;
*dststats = can->stats;
break;
case OCCAN_IOC_GET_STATUS:
/* return the status of the */
if ( !ioarg->buffer )
return RTEMS_INVALID_NAME;
*(unsigned int *)ioarg->buffer = can->status;
break;
/* Set physical link */
case OCCAN_IOC_SET_LINK:
#ifdef REDUNDANT_CHANNELS
if ( can->started )
return RTEMS_RESOURCE_IN_USE; /* EBUSY */
/* switch HW channel */
can->channel = (unsigned int)ioargs->buffer;
#else
return RTEMS_NOT_IMPLEMENTED;
#endif
break;
case OCCAN_IOC_SET_FILTER:
if ( can->started )
return RTEMS_RESOURCE_IN_USE; /* EBUSY */
afilter = (struct occan_afilter *)ioarg->buffer;
if ( !afilter )
return RTEMS_INVALID_NAME; /* EINVAL */
/* copy acceptance filter */
can->acode[0] = afilter->code[0];
can->acode[1] = afilter->code[1];
can->acode[2] = afilter->code[2];
can->acode[3] = afilter->code[3];
can->amask[0] = afilter->mask[0];
can->amask[1] = afilter->mask[1];
can->amask[2] = afilter->mask[2];
can->amask[3] = afilter->mask[3];
can->single_mode = ( afilter->single_mode ) ? 1 : 0;
/* Acceptance filter is written to hardware
* when starting.
*/
/* pelican_set_accept(can,can->acode,can->amask);*/
break;
case OCCAN_IOC_SET_BLK_MODE:
can->rxblk = (unsigned int)ioarg->buffer & OCCAN_BLK_MODE_RX;
can->txblk = ((unsigned int)ioarg->buffer & OCCAN_BLK_MODE_TX) >> 1;
break;
case OCCAN_IOC_START:
if ( can->started )
return RTEMS_RESOURCE_IN_USE; /* EBUSY */
if ( pelican_start(can) )
return RTEMS_NO_MEMORY; /* failed because of no memory, can happen if SET_BUFLEN failed */
can->started = 1;
break;
case OCCAN_IOC_STOP:
if ( !can->started )
return RTEMS_RESOURCE_IN_USE; /* EBUSY */
pelican_stop(can);
can->started = 0;
break;
default:
return RTEMS_NOT_DEFINED;
}
return RTEMS_SUCCESSFUL;
}
static void occan_interrupt(occan_priv *can){
unsigned char iflags;
pelican_regs *regs = can->regs;
CANMsg *msg;
int signal_rx=0, signal_tx=0;
unsigned char tmp, errcode, arbcode;
int tx_error_cnt,rx_error_cnt;
can->stats.ints++;
while ( (iflags = READ_REG(&can->regs->intflags)) != 0 ){
/* still interrupts to handle */
if ( iflags & PELICAN_IF_RX ){
/* the rx fifo is not empty
* put 1 message into rxfifo for later use
*/
/* get empty (or make room) message */
msg = occan_fifo_put_claim(can->rxfifo,1);
tmp = READ_REG(&regs->rx_fi_xff);
msg->extended = tmp >> 7;
msg->rtr = (tmp >> 6) & 1;
msg->len = tmp = tmp & 0x0f;
if ( msg->extended ){
/* extended message */
msg->id = READ_REG(&regs->msg.rx_eff.id[0])<<(5+8+8) |
READ_REG(&regs->msg.rx_eff.id[1])<<(5+8) |
READ_REG(&regs->msg.rx_eff.id[2])<<5 |
READ_REG(&regs->msg.rx_eff.id[3])>>3;
while(tmp--){
msg->data[tmp] = READ_REG(&regs->msg.rx_eff.data[tmp]);
}
/*
msg->data[0] = READ_REG(&regs->msg.rx_eff.data[0]);
msg->data[1] = READ_REG(&regs->msg.rx_eff.data[1]);
msg->data[2] = READ_REG(&regs->msg.rx_eff.data[2]);
msg->data[3] = READ_REG(&regs->msg.rx_eff.data[3]);
msg->data[4] = READ_REG(&regs->msg.rx_eff.data[4]);
msg->data[5] = READ_REG(&regs->msg.rx_eff.data[5]);
msg->data[6] = READ_REG(&regs->msg.rx_eff.data[6]);
msg->data[7] = READ_REG(&regs->msg.rx_eff.data[7]);
*/
}else{
/* standard message */
msg->id = READ_REG(&regs->msg.rx_sff.id[0])<<3 |
READ_REG(&regs->msg.rx_sff.id[1])>>5;
while(tmp--){
msg->data[tmp] = READ_REG(&regs->msg.rx_sff.data[tmp]);
}
/*
msg->data[0] = READ_REG(&regs->msg.rx_sff.data[0]);
msg->data[1] = READ_REG(&regs->msg.rx_sff.data[1]);
msg->data[2] = READ_REG(&regs->msg.rx_sff.data[2]);
msg->data[3] = READ_REG(&regs->msg.rx_sff.data[3]);
msg->data[4] = READ_REG(&regs->msg.rx_sff.data[4]);
msg->data[5] = READ_REG(&regs->msg.rx_sff.data[5]);
msg->data[6] = READ_REG(&regs->msg.rx_sff.data[6]);
msg->data[7] = READ_REG(&regs->msg.rx_sff.data[7]);
*/
}
/* Re-Enable RX buffer for a new message */
regs->cmd = PELICAN_CMD_RELRXBUF;
/* make message available to the user */
occan_fifo_put(can->rxfifo);
/* bump stat counters */
can->stats.rx_msgs++;
/* signal the semaphore only once */
signal_rx = 1;
}
if ( iflags & PELICAN_IF_TX ){
/* there is room in tx fifo of HW */
if ( !occan_fifo_empty(can->txfifo) ){
/* send 1 more messages */
msg = occan_fifo_claim_get(can->txfifo);
if ( pelican_send(can,msg) ){
/* ERROR! We got an TX interrupt telling us
* tx fifo is empty, yet it is not.
*
* Complain about this max 10 times
*/
if ( can->stats.tx_buf_error < 10 ){
printk("OCCAN: got TX interrupt but TX fifo in not empty (%d)\n\r",can->stats.tx_buf_error);
}
can->status |= OCCAN_STATUS_QUEUE_ERROR;
can->stats.tx_buf_error++;
}
/* free software-fifo space taken by sent message */
occan_fifo_get(can->txfifo);
/* bump stat counters */
can->stats.tx_msgs++;
/* wake any sleeping thread waiting for "fifo not full" */
signal_tx = 1;
}
}
if ( iflags & PELICAN_IF_ERRW ){
tx_error_cnt = READ_REG(&regs->tx_err_cnt);
rx_error_cnt = READ_REG(&regs->rx_err_cnt);
/* 1. if bus off tx error counter = 127 */
if ( (tx_error_cnt > 96) || (rx_error_cnt > 96) ){
/* in Error Active Warning area or BUS OFF */
can->status |= OCCAN_STATUS_WARN;
/* check reset bit for reset mode */
if ( READ_REG(&regs->mode) & PELICAN_MOD_RESET ){
/* in reset mode ==> bus off */
can->status |= OCCAN_STATUS_ERR_BUSOFF | OCCAN_STATUS_RESET;
/***** pelican_stop(can) ******
* turn off interrupts
* enter reset mode (HW already done that for us)
*/
regs->inten = 0;
/* Indicate that we are not started any more.
* This will make write/read return with EBUSY
* on read/write attempts.
*
* User must issue a ioctl(START) to get going again.
*/
can->started = 0;
/* signal any waiting read/write threads, so that they
* can handle the bus error.
*/
signal_rx = 1;
signal_tx = 1;
/* ingnore any old pending interrupt */
break;
}
}else{
/* not in Upper Error Active area any more */
can->status &= ~(OCCAN_STATUS_WARN);
}
can->stats.err_warn++;
}
if ( iflags & PELICAN_IF_DOVR){
can->status |= OCCAN_STATUS_OVERRUN;
can->stats.err_dovr++;
DBG("OCCAN_INT: DOVR\n\r");
}
if ( iflags & PELICAN_IF_ERRP){
/* Let the error counters decide what kind of
* interrupt it was. In/Out of EPassive area.
*/
tx_error_cnt = READ_REG(&regs->tx_err_cnt);
rx_error_cnt = READ_REG(&regs->rx_err_cnt);
if ( (tx_error_cnt > 127) || (rx_error_cnt > 127) ){
can->status |= OCCAN_STATUS_ERR_PASSIVE;
}else{
can->status &= ~(OCCAN_STATUS_ERR_PASSIVE);
}
/* increase Error Passive In/out interrupt counter */
can->stats.err_errp++;
}
if ( iflags & PELICAN_IF_ARB){
arbcode = READ_REG(&regs->arbcode);
can->stats.err_arb_bitnum[arbcode & PELICAN_ARB_BITS]++;
can->stats.err_arb++;
DBG("OCCAN_INT: ARB (0x%x)\n\r",arbcode & PELICAN_ARB_BITS);
}
if ( iflags & PELICAN_IF_BUS){
/* Some kind of BUS error, only used for
* statistics. Error Register is decoded
* and put into can->stats.
*/
errcode = READ_REG(&regs->errcode);
switch( errcode & PELICAN_ECC_CODE ){
case PELICAN_ECC_CODE_BIT:
can->stats.err_bus_bit++;
break;
case PELICAN_ECC_CODE_FORM:
can->stats.err_bus_form++;
break;
case PELICAN_ECC_CODE_STUFF:
can->stats.err_bus_stuff++;
break;
case PELICAN_ECC_CODE_OTHER:
can->stats.err_bus_other++;
break;
}
/* Get Direction (TX/RX) */
if ( errcode & PELICAN_ECC_DIR ){
can->stats.err_bus_rx++;
}else{
can->stats.err_bus_tx++;
}
/* Get Segment in frame that went wrong */
can->stats.err_bus_segs[errcode & PELICAN_ECC_SEG]++;
/* total number of bus errors */
can->stats.err_bus++;
}
}
/* signal Binary semaphore, messages available! */
if ( signal_rx ){
rtems_semaphore_release(can->rxsem);
}
if ( signal_tx ){
rtems_semaphore_release(can->txsem);
}
}
#ifdef OCCAN_DEFINE_INTHANDLER
static void occan_interrupt_handler(rtems_vector_number v){
int minor;
/* convert to */
for(minor = 0; minor < can_cores; minor++) {
if ( v == (cans[minor].irq+0x10) ) {
occan_interrupt(&cans[minor]);
return;
}
}
}
#endif
#define OCCAN_DRIVER_TABLE_ENTRY { occan_initialize, occan_open, occan_close, occan_read, occan_write, occan_ioctl }
static rtems_driver_address_table occan_driver = OCCAN_DRIVER_TABLE_ENTRY;
int OCCAN_PREFIX(_register)(amba_confarea_type *bus){
rtems_status_code r;
rtems_device_major_number m;
amba_bus = bus;
if ( !bus )
return 1;
if ((r = rtems_io_register_driver(0, &occan_driver, &m)) == RTEMS_SUCCESSFUL) {
DBG("OCCAN driver successfully registered, major: %d\n\r", m);
}else{
switch(r) {
case RTEMS_TOO_MANY:
printk("OCCAN rtems_io_register_driver failed: RTEMS_TOO_MANY\n\r"); break;
case RTEMS_INVALID_NUMBER:
printk("OCCAN rtems_io_register_driver failed: RTEMS_INVALID_NUMBER\n\r"); break;
case RTEMS_RESOURCE_IN_USE:
printk("OCCAN rtems_io_register_driver failed: RTEMS_RESOURCE_IN_USE\n\r"); break;
default:
printk("OCCAN rtems_io_register_driver failed\n\r");
}
return 1;
}
return 0;
}
/*******************************************************************************
* FIFO IMPLEMENTATION
*/
static occan_fifo *occan_fifo_create(int cnt){
occan_fifo *fifo;
fifo = malloc(sizeof(occan_fifo)+cnt*sizeof(CANMsg));
if ( fifo ){
fifo->cnt = cnt;
fifo->full = 0;
fifo->ovcnt = 0;
fifo->base = (CANMsg *)&fifo->fifoarea[0];
fifo->tail = fifo->head = fifo->base;
/* clear CAN Messages */
memset(fifo->base,0,cnt * sizeof(CANMsg));
}
return fifo;
}
static void occan_fifo_free(occan_fifo *fifo){
if ( fifo )
free(fifo);
}
static int occan_fifo_full(occan_fifo *fifo){
return fifo->full;
}
static int occan_fifo_empty(occan_fifo *fifo){
return (!fifo->full) && (fifo->head == fifo->tail);
}
/* Stage 1 - get buffer to fill (never fails if force!=0) */
static CANMsg *occan_fifo_put_claim(occan_fifo *fifo, int force){
if ( !fifo )
return NULL;
if ( occan_fifo_full(fifo) ){
if ( !force )
return NULL;
/* all buffers already used ==> overwrite the oldest */
fifo->ovcnt++;
occan_fifo_get(fifo);
}
return fifo->head;
}
/* Stage 2 - increment indexes */
static void occan_fifo_put(occan_fifo *fifo){
if ( occan_fifo_full(fifo) )
return;
/* wrap around */
fifo->head = (fifo->head >= &fifo->base[fifo->cnt-1])? fifo->base : fifo->head+1;
if ( fifo->head == fifo->tail )
fifo->full = 1;
}
static CANMsg *occan_fifo_claim_get(occan_fifo *fifo){
if ( occan_fifo_empty(fifo) )
return NULL;
/* return oldest message */
return fifo->tail;
}
static void occan_fifo_get(occan_fifo *fifo){
if ( !fifo )
return;
if ( occan_fifo_empty(fifo) )
return;
/* increment indexes */
fifo->tail = (fifo->tail >= &fifo->base[fifo->cnt-1])? fifo->base : fifo->tail+1;
fifo->full = 0;
}
/*******************************************************************************/
Reference in New Issue View Git Blame Copy Permalink