2008-09-23 Joel Sherrill <joel.sherrill@oarcorp.com>

* configure.ac, include/bspopts.h.in: Make letting boot_card() handle work area allocation mandatory. Rename RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to BSP_BOOTCARD_OPTIONS.
2025-12-05 15:15:44 +00:00 · 2008-09-23 19:52:35 +00:00
parent 7a592dcddd
commit 63d82b7b88
21 changed files with 58 additions and 51 deletions
--- a/c/src/lib/libbsp/arm/lpc24xx/ChangeLog
+++ b/c/src/lib/libbsp/arm/lpc24xx/ChangeLog
@@ -1,3 +1,9 @@
+2008-09-23	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* configure.ac, include/bspopts.h.in: Make letting boot_card() handle
+	work area allocation mandatory. Rename
+	RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to BSP_BOOTCARD_OPTIONS.
+
 2008-09-23	Joel Sherrill <joel.sherrill@OARcorp.com>

 	* README: Add URL.
--- a/c/src/lib/libbsp/arm/lpc24xx/configure.ac
+++ b/c/src/lib/libbsp/arm/lpc24xx/configure.ac
@@ -23,7 +23,7 @@ RTEMS_PROG_CCAS
 RTEMS_CHECK_NETWORKING 
 AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")

-RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
+BSP_BOOTCARD_OPTIONS

 AC_CONFIG_FILES([Makefile])
 AC_OUTPUT
--- a/c/src/lib/libbsp/arm/lpc24xx/include/bspopts.h.in
+++ b/c/src/lib/libbsp/arm/lpc24xx/include/bspopts.h.in
@@ -1,11 +1,6 @@
 /* include/bspopts.h.in.  Generated from configure.ac by autoheader.  */

-/* BSP uses shared logic in bootcard.c */
-#undef BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
-
-/* If defined, then PSIM will put a non-zero pattern into the RTEMS Workspace
-   and C program heap. This should assist in finding code that assumes memory
-   starts set to zero. */
+/* If defined */
 #undef BSP_DIRTY_MEMORY

 /* Define to the address where bug reports for this package should be sent. */
--- a/c/src/lib/libbsp/arm/smdk2410/ChangeLog
+++ b/c/src/lib/libbsp/arm/smdk2410/ChangeLog
@@ -1,3 +1,9 @@
+2008-09-23	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* configure.ac, include/bspopts.h.in: Make letting boot_card() handle
+	work area allocation mandatory. Rename
+	RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to BSP_BOOTCARD_OPTIONS.
+
 2008-09-22	Joel Sherrill <joel.sherrill@oarcorp.com>

 	* Makefile.am, configure.ac, include/bspopts.h.in: Use standardized
--- a/c/src/lib/libbsp/arm/smdk2410/configure.ac
+++ b/c/src/lib/libbsp/arm/smdk2410/configure.ac
@@ -27,7 +27,7 @@ RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[*],[1])
 RTEMS_BSPOPTS_HELP([BSP_RESET_BOARD_AT_EXIT],
 [If defined, reset the board when the application exits.])

-RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
+BSP_BOOTCARD_OPTIONS

 # Explicitly list all Makefiles here
 AC_CONFIG_FILES([Makefile])
--- a/c/src/lib/libbsp/arm/smdk2410/include/bspopts.h.in
+++ b/c/src/lib/libbsp/arm/smdk2410/include/bspopts.h.in
@@ -1,11 +1,6 @@
 /* include/bspopts.h.in.  Generated from configure.ac by autoheader.  */

-/* BSP uses shared logic in bootcard.c */
-#undef BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
-
-/* If defined, then PSIM will put a non-zero pattern into the RTEMS Workspace
-   and C program heap. This should assist in finding code that assumes memory
-   starts set to zero. */
+/* If defined */
 #undef BSP_DIRTY_MEMORY

 /* If defined, print a message and wait until pressed before resetting board
--- a/c/src/lib/libbsp/m68k/genmcf548x/ChangeLog
+++ b/c/src/lib/libbsp/m68k/genmcf548x/ChangeLog
@@ -1,3 +1,9 @@
+2008-09-23	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* configure.ac, include/bspopts.h.in: Make letting boot_card() handle
+	work area allocation mandatory. Rename
+	RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to BSP_BOOTCARD_OPTIONS.
+
 2008-09-22	Joel Sherrill <joel.sherrill@oarcorp.com>

 	* Makefile.am, configure.ac, include/bspopts.h.in: Use standardized
--- a/c/src/lib/libbsp/m68k/genmcf548x/configure.ac
+++ b/c/src/lib/libbsp/m68k/genmcf548x/configure.ac
@@ -33,7 +33,7 @@ RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[*],[1])
 RTEMS_BSPOPTS_HELP([BSP_RESET_BOARD_AT_EXIT],
 [If defined, reset the board when the application exits.])

-RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
+BSP_BOOTCARD_OPTIONS

 # Explicitly list all Makefiles here
 AC_CONFIG_FILES([Makefile])
--- a/c/src/lib/libbsp/m68k/genmcf548x/include/bspopts.h.in
+++ b/c/src/lib/libbsp/m68k/genmcf548x/include/bspopts.h.in
@@ -1,14 +1,9 @@
 /* include/bspopts.h.in.  Generated from configure.ac by autoheader.  */

-/* BSP uses shared logic in bootcard.c */
-#undef BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
-
 /* Use a clock speed of 100000000 for the m5484FireEngine board */
 #undef BSP_CPU_CLOCK_SPEED

-/* If defined, then PSIM will put a non-zero pattern into the RTEMS Workspace
-   and C program heap. This should assist in finding code that assumes memory
-   starts set to zero. */
+/* If defined */
 #undef BSP_DIRTY_MEMORY

 /* If defined, print a message and wait until pressed before resetting board
--- a/c/src/lib/libbsp/m68k/mcf52235/ChangeLog
+++ b/c/src/lib/libbsp/m68k/mcf52235/ChangeLog
@@ -1,3 +1,9 @@
+2008-09-23	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* configure.ac, include/bspopts.h.in: Make letting boot_card() handle
+	work area allocation mandatory. Rename
+	RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to BSP_BOOTCARD_OPTIONS.
+
 2008-09-22	Joel Sherrill <joel.sherrill@oarcorp.com>

 	* Makefile.am, configure.ac, include/bspopts.h.in: Use standardized
--- a/c/src/lib/libbsp/m68k/mcf52235/configure.ac
+++ b/c/src/lib/libbsp/m68k/mcf52235/configure.ac
@@ -15,7 +15,7 @@ RTEMS_PROG_CC_FOR_TARGET
 RTEMS_CANONICALIZE_TOOLS
 RTEMS_PROG_CCAS

-RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
+BSP_BOOTCARD_OPTIONS

 #RTEMS_CHECK_NETWORKING
 #AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
@@ -29,7 +29,7 @@ RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[*],[1])
 RTEMS_BSPOPTS_HELP([BSP_RESET_BOARD_AT_EXIT],
 [If defined, reset the board when the application exits.])

-RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
+BSP_BOOTCARD_OPTIONS

 # Explicitly list all Makefiles here
 AC_CONFIG_FILES([Makefile])
--- a/c/src/lib/libbsp/m68k/mcf52235/include/bspopts.h.in
+++ b/c/src/lib/libbsp/m68k/mcf52235/include/bspopts.h.in
@@ -1,11 +1,6 @@
 /* include/bspopts.h.in.  Generated from configure.ac by autoheader.  */

-/* BSP uses shared logic in bootcard.c */
-#undef BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
-
-/* If defined, then PSIM will put a non-zero pattern into the RTEMS Workspace
-   and C program heap. This should assist in finding code that assumes memory
-   starts set to zero. */
+/* If defined */
 #undef BSP_DIRTY_MEMORY

 /* If defined, print a message and wait until pressed before resetting board
--- a/c/src/lib/libbsp/m68k/mcf5329/ChangeLog
+++ b/c/src/lib/libbsp/m68k/mcf5329/ChangeLog
@@ -1,3 +1,9 @@
+2008-09-23	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* configure.ac, include/bspopts.h.in: Make letting boot_card() handle
+	work area allocation mandatory. Rename
+	RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to BSP_BOOTCARD_OPTIONS.
+
 2008-09-22	Joel Sherrill <joel.sherrill@oarcorp.com>

 	* Makefile.am, configure.ac, include/bspopts.h.in: Use standardized
--- a/c/src/lib/libbsp/m68k/mcf5329/configure.ac
+++ b/c/src/lib/libbsp/m68k/mcf5329/configure.ac
@@ -15,7 +15,7 @@ RTEMS_PROG_CC_FOR_TARGET
 RTEMS_CANONICALIZE_TOOLS
 RTEMS_PROG_CCAS

-RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
+BSP_BOOTCARD_OPTIONS

 RTEMS_CHECK_NETWORKING
 AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
@@ -29,7 +29,7 @@ RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[*],[1])
 RTEMS_BSPOPTS_HELP([BSP_RESET_BOARD_AT_EXIT],
 [If defined, reset the board when the application exits.])

-RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
+BSP_BOOTCARD_OPTIONS

 # Explicitly list all Makefiles here
 AC_CONFIG_FILES([Makefile])
--- a/c/src/lib/libbsp/m68k/mcf5329/include/bspopts.h.in
+++ b/c/src/lib/libbsp/m68k/mcf5329/include/bspopts.h.in
@@ -1,11 +1,6 @@
 /* include/bspopts.h.in.  Generated from configure.ac by autoheader.  */

-/* BSP uses shared logic in bootcard.c */
-#undef BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
-
-/* If defined, then PSIM will put a non-zero pattern into the RTEMS Workspace
-   and C program heap. This should assist in finding code that assumes memory
-   starts set to zero. */
+/* If defined */
 #undef BSP_DIRTY_MEMORY

 /* If defined, print a message and wait until pressed before resetting board
--- a/c/src/lib/libbsp/powerpc/mvme3100/ChangeLog
+++ b/c/src/lib/libbsp/powerpc/mvme3100/ChangeLog
@@ -1,3 +1,9 @@
+2008-09-23	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* configure.ac, include/bspopts.h.in: Make letting boot_card() handle
+	work area allocation mandatory. Rename
+	RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to BSP_BOOTCARD_OPTIONS.
+
 2008-09-22	Joel Sherrill <joel.sherrill@oarcorp.com>

 	* include/bsp.h, startup/misc.c: Use standardized bsp_cleanup() which
--- a/c/src/lib/libbsp/powerpc/mvme3100/configure.ac
+++ b/c/src/lib/libbsp/powerpc/mvme3100/configure.ac
@@ -35,7 +35,7 @@ RTEMS_BSPOPTS_HELP([PPC_USE_DATA_CACHE],
 of PowerPC 603e revisions and emulator versions.
 The BSP actually contains the call that enables this.])

-RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
+BSP_BOOTCARD_OPTIONS

 # Explicitly list all Makefiles here
 AC_CONFIG_FILES([Makefile])
--- a/c/src/lib/libbsp/powerpc/mvme3100/include/bspopts.h.in
+++ b/c/src/lib/libbsp/powerpc/mvme3100/include/bspopts.h.in
@@ -1,11 +1,6 @@
 /* include/bspopts.h.in.  Generated from configure.ac by autoheader.  */

-/* BSP uses shared logic in bootcard.c */
-#undef BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
-
-/* If defined, then PSIM will put a non-zero pattern into the RTEMS Workspace
-   and C program heap. This should assist in finding code that assumes memory
-   starts set to zero. */
+/* If defined */
 #undef BSP_DIRTY_MEMORY

 /* Define to the address where bug reports for this package should be sent. */
--- a/c/src/lib/libbsp/powerpc/virtex/ChangeLog
+++ b/c/src/lib/libbsp/powerpc/virtex/ChangeLog
@@ -1,3 +1,9 @@
+2008-09-23	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* configure.ac, include/bspopts.h.in: Make letting boot_card() handle
+	work area allocation mandatory. Rename
+	RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to BSP_BOOTCARD_OPTIONS.
+
 2008-09-22	Joel Sherrill <joel.sherrill@oarcorp.com>

 	* Makefile.am, configure.ac, include/bspopts.h.in: Use standardized
--- a/c/src/lib/libbsp/powerpc/virtex/configure.ac
+++ b/c/src/lib/libbsp/powerpc/virtex/configure.ac
@@ -50,7 +50,7 @@ RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[*],[1])
 RTEMS_BSPOPTS_HELP([BSP_RESET_BOARD_AT_EXIT],
 [If defined, reset the board when the application exits.])

-RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
+BSP_BOOTCARD_OPTIONS

 # Explicitly list all Makefiles here
 AC_CONFIG_FILES([Makefile])
--- a/c/src/lib/libbsp/powerpc/virtex/include/bspopts.h.in
+++ b/c/src/lib/libbsp/powerpc/virtex/include/bspopts.h.in
@@ -1,11 +1,6 @@
 /* include/bspopts.h.in.  Generated from configure.ac by autoheader.  */

-/* BSP uses shared logic in bootcard.c */
-#undef BSP_BOOTCARD_HANDLES_RAM_ALLOCATION
-
-/* If defined, then PSIM will put a non-zero pattern into the RTEMS Workspace
-   and C program heap. This should assist in finding code that assumes memory
-   starts set to zero. */
+/* If defined */
 #undef BSP_DIRTY_MEMORY

 /* If defined, print a message and wait until pressed before resetting board