Whitespace removal.

cpukit/score/include/rtems/score/address.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/address.h
  *
  *  This include file contains the information required to manipulate

cpukit/score/include/rtems/score/apimutex.h

@@ -1,4 +1,4 @@
-/** 
+/**
  * @file
  *
  * @ingroup ScoreAPIMutex

cpukit/score/include/rtems/score/bitfield.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/bitfield.h
  *
  *  This include file contains all bit field manipulation routines.
@@ -37,7 +37,7 @@ extern "C" {
  *  This table is used by the generic bitfield routines to perform
  *  a highly optimized bit scan without the use of special CPU
  *  instructions.
- */ 
+ */
 #ifndef SCORE_INIT
 extern const unsigned char __log2table[256];
 #else

cpukit/score/include/rtems/score/chain.h

@@ -146,7 +146,7 @@ Chain_Node *_Chain_Get(
  *  @brief Insert a node on a chain
  *
  *  This routine inserts @a the_node on a chain immediately following
- *  @a after_node.  
+ *  @a after_node.
  *
  *  @note It disables interrupts to ensure the atomicity
  *  of the extract operation.

cpukit/score/include/rtems/score/context.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/context.h
  *
  *  This include file contains all information about each thread's context.
@@ -57,7 +57,7 @@ SCORE_EXTERN volatile bool _Context_Switch_necessary;
  *  thread's initial state.
  *
  *  @param[in] _the_context will be initialized
- *  @param[in] _stack is the lowest physical address of the thread's 
+ *  @param[in] _stack is the lowest physical address of the thread's
  *         context
  *  @param[in] _size is the size in octets of the thread's context
  *  @param[in] _isr is the ISR enable level for this thread

cpukit/score/include/rtems/score/copyrt.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/copyrt.h
  *
  *  This include file contains the copyright notice for RTEMS

cpukit/score/include/rtems/score/corebarrier.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/corebarrier.h
  *
  *  This include file contains all the constants and structures associated

cpukit/score/include/rtems/score/coremsg.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/coremsg.h
  *
  *  This include file contains all the constants and structures associated
@@ -106,7 +106,7 @@ typedef enum {
   CORE_MESSAGE_QUEUE_DISCIPLINES_PRIORITY
 }   CORE_message_queue_Disciplines;
 
-/** 
+/**
  *  @brief Message Priority for Appending
  *
  *  This is the priority constant used when appending messages onto
@@ -114,7 +114,7 @@ typedef enum {
  */
 #define  CORE_MESSAGE_QUEUE_SEND_REQUEST   INT_MAX
 
-/** 
+/**
  *  @brief Message Priority for Prepending
  *
  *  This is the priority constant used when prepending messages onto
@@ -228,7 +228,7 @@ typedef struct {
    */
   CORE_message_queue_Buffer         *message_buffers;
   #if defined(RTEMS_SCORE_COREMSG_ENABLE_NOTIFICATION)
-    /** This is the routine invoked when the message queue transitions 
+    /** This is the routine invoked when the message queue transitions
      *  from zero (0) messages pending to one (1) message pending.
      */
     CORE_message_queue_Notify_Handler  notify_handler;
@@ -255,7 +255,7 @@ typedef struct {
  *         may be sent to this message queue instance
  *
  *  @return true if the message queue can be initialized.  In general,
- *         false will only be returned if memory for the pending 
+ *         false will only be returned if memory for the pending
  *         messages cannot be allocated.
  */
 bool _CORE_message_queue_Initialize(
@@ -337,7 +337,7 @@ uint32_t   _CORE_message_queue_Flush_support(
  *  @param[in] size is the size of the message being broadcast
  *  @param[in] id is the RTEMS object Id associated with this message queue.
  *         It is used when unblocking a remote thread.
- *  @param[in] api_message_queue_mp_support is the routine to invoke if 
+ *  @param[in] api_message_queue_mp_support is the routine to invoke if
  *         a thread that is unblocked is actually a remote thread.
  *  @param[out] count points to the variable that will contain the
  *         number of tasks that are sent this message
@@ -368,7 +368,7 @@ CORE_message_queue_Status _CORE_message_queue_Broadcast(
  *  @param[in] size is the size of the message being send
  *  @param[in] id is the RTEMS object Id associated with this message queue.
  *         It is used when unblocking a remote thread.
- *  @param[in] api_message_queue_mp_support is the routine to invoke if 
+ *  @param[in] api_message_queue_mp_support is the routine to invoke if
  *         a thread that is unblocked is actually a remote thread.
  *  @param[in] submit_type determines whether the message is prepended,
  *         appended, or enqueued in priority order.
@@ -408,7 +408,7 @@ CORE_message_queue_Status _CORE_message_queue_Submit(
  *         if the message queue is empty.
  *  @param[in] timeout is the maximum number of clock ticks that the calling
  *         thread is willing to block if the message queue is empty.
- * 
+ *
  *  @return indication of the successful completion or reason for failure
  *  @note Returns message priority via return are in TCB.
  */

cpukit/score/include/rtems/score/coremutex.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/coremutex.h
  *
  *  This include file contains all the constants and structures associated
@@ -71,7 +71,7 @@ typedef enum {
    */
   CORE_MUTEX_DISCIPLINES_PRIORITY_CEILING
 }   CORE_mutex_Disciplines;
-  
+
 /**
  *  @brief Mutex method return statuses
  *
@@ -195,7 +195,7 @@ typedef struct {
 #ifdef __RTEMS_STRICT_ORDER_MUTEX__
 /*@beief Core Mutex Lock_Chain Struct
  *
- * The following defines the control block used to manage lock chain of 
+ * The following defines the control block used to manage lock chain of
  * priority inheritance mutex.
  */
   typedef struct{
@@ -245,7 +245,7 @@ typedef struct {
   /** This field is used to manipulate the priority inheritance mutex queue*/
   CORE_mutex_order_list   queue;
 #endif
-  
+
 }   CORE_mutex_Control;
 
 /**
@@ -310,7 +310,7 @@ RTEMS_INLINE_ROUTINE int _CORE_mutex_Seize_interrupt_trylock_body(
   /**
    *  The default is to favor speed and inlining this definitely saves
    *  a few instructions.  This is very important for mutex performance.
-   *  
+   *
    *  @param[in] _mutex will attempt to lock
    *  @param[in] _level_p is the interrupt level holder
    */
@@ -349,16 +349,16 @@ void _CORE_mutex_Seize_interrupt_blocking(
  *
  *  @note If the mutex is called from an interrupt service routine,
  *        with context switching disabled, or before multitasking,
- *        then a fatal error is generated. 
+ *        then a fatal error is generated.
  *
  *  The logic on this routine is as follows:
  *
  *  * If incorrect system state
- *      return an error 
+ *      return an error
  *  * If mutex is available without any contention or blocking
  *      obtain it with interrupts disabled and returned
  *  * If the caller is willing to wait
- *      then they are blocked. 
+ *      then they are blocked.
  */
 
 #define _CORE_mutex_Seize_body( \

cpukit/score/include/rtems/score/corerwlock.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/corerwlock.h
  *
  *  This include file contains all the constants and structures associated

cpukit/score/include/rtems/score/coresem.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/coresem.h
  *
  *  This include file contains all the constants and structures associated

cpukit/score/include/rtems/score/corespinlock.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/corespinlock.h
  *
  *  This include file contains all the constants and structures associated
@@ -50,11 +50,11 @@ typedef enum {
    */
   CORE_SPINLOCK_NOT_HOLDER,
   /** This status indicates that a thread reached the limit of time it
-   *  was willing to wait on the spin lock. 
+   *  was willing to wait on the spin lock.
    */
   CORE_SPINLOCK_TIMEOUT,
   /** This status indicates that a thread is currently waiting for this
-   *  spin lock. 
+   *  spin lock.
    */
   CORE_SPINLOCK_IS_BUSY,
   /** This status indicates that the spinlock is currently locked and thus
@@ -92,7 +92,7 @@ typedef struct {
  */
 typedef struct {
   /** XXX may not be needed */
-  CORE_spinlock_Attributes  Attributes; 
+  CORE_spinlock_Attributes  Attributes;
 
   /** This field is the lock.
    */

cpukit/score/include/rtems/score/interr.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/interr.h
  *
  *  This include file contains constants and prototypes related

cpukit/score/include/rtems/score/isr.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/isr.h
  *
  *  This include file contains all the constants and structures associated
@@ -199,7 +199,7 @@ void _ISR_Dispatch( void );
  *  Invokes the thread dispatcher or signal extension if necessary.
  *
  *  It should be called at the end of interrupt processing.  The interrupt nest
- *  level must be zero before calling this routine. 
+ *  level must be zero before calling this routine.
  *
  *  This is a high level replacement of _ISR_Dispatch().  It must be invoked
  *  within an environment such that a call to _Thread_Dispatch() is allowed.

cpukit/score/include/rtems/score/mpci.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/mpci.h
  *
  *  This include file contains all the constants and structures associated
@@ -23,7 +23,7 @@
  *  @defgroup ScoreMPCI MPCI Handler
  *
  *  The MPCI Handler encapsulates functionality which is related to the
- *  generation, receipt, and processing of remote operations in a 
+ *  generation, receipt, and processing of remote operations in a
  *  multiprocessor system.  This handler contains the message passing
  *  support for making remote service calls as well as the server thread
  *  which processes requests from remote nodes.
@@ -67,7 +67,7 @@ typedef MPCI_Entry ( *MPCI_initialization_entry )( void );
 
 /**
  *  This type defines the prototype for the get packet entry point
- *  in an Multiprocessor Communications Interface.  The single 
+ *  in an Multiprocessor Communications Interface.  The single
  *  parameter will point to the packet allocated.
  */
 typedef MPCI_Entry ( *MPCI_get_packet_entry )(
@@ -76,7 +76,7 @@ typedef MPCI_Entry ( *MPCI_get_packet_entry )(
 
 /**
  *  This type defines the prototype for the return packet entry point
- *  in an Multiprocessor Communications Interface.  The single 
+ *  in an Multiprocessor Communications Interface.  The single
  *  parameter will point to a packet previously allocated by the
  *  get packet MPCI entry.
  */
@@ -86,7 +86,7 @@ typedef MPCI_Entry ( *MPCI_return_packet_entry )(
 
 /**
  *  This type defines the prototype for send get packet entry point
- *  in an Multiprocessor Communications Interface.  The single 
+ *  in an Multiprocessor Communications Interface.  The single
  *  parameter will point to a packet previously allocated by the
  *  get packet entry point that has been filled in by the caller.
  */
@@ -97,7 +97,7 @@ typedef MPCI_Entry ( *MPCI_send_entry )(
 
 /**
  *  This type defines the prototype for the receive packet entry point
- *  in an Multiprocessor Communications Interface.  The single 
+ *  in an Multiprocessor Communications Interface.  The single
  *  parameter will point to a packet allocated and filled in by the
  *  receive packet handler.  The caller will block until a packet is
  *  received.
@@ -118,7 +118,7 @@ typedef struct {
   /** This fields contains the timeout for MPCI operations in ticks. */
   uint32_t                   default_timeout;
   /** This field contains the maximum size of a packet supported by this
-   *  MPCI layer.  This size places a limit on the size of a message 
+   *  MPCI layer.  This size places a limit on the size of a message
    *  which can be transmitted over this interface.
    **/
   size_t                     maximum_packet_size;
@@ -161,7 +161,7 @@ typedef struct {
    *  on all nodes.
    */
   uint32_t                         maximum_nodes;
-  /** This field is the maximum number of concurrently existent 
+  /** This field is the maximum number of concurrently existent
    *  globally offered objects.
    */
   uint32_t                         maximum_global_objects;
@@ -221,7 +221,7 @@ void _MPCI_Initialization ( void );
  *
  *  @param[in] the_class is the class indicator for packets which will
  *             be processed by @a the_packet_processor method.
- *  @param[in] the_packet_processor is a pointer to a method which is 
+ *  @param[in] the_packet_processor is a pointer to a method which is
  *             invoked when packets with @a the_class are received.
  */
 void _MPCI_Register_packet_processor(
@@ -309,7 +309,7 @@ MP_packet_Prefix  *_MPCI_Receive_packet ( void );
  *  @param[in] the_packet is the response packet to be processed.
  *
  *  @return This method returns a pointer to the thread which was if unblocked
- *          or NULL if the waiting thread no longer exists. 
+ *          or NULL if the waiting thread no longer exists.
  */
 Thread_Control *_MPCI_Process_response (
   MP_packet_Prefix *the_packet

cpukit/score/include/rtems/score/mppkt.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/mppkt.h
  *
  *  This package is the specification for the Packet Handler.

cpukit/score/include/rtems/score/object.h

@@ -552,7 +552,7 @@ void _Objects_Free(
 
 /**
  *  This macro is used to build a thirty-two bit style name from
- *  four characters.  The most significant byte will be the 
+ *  four characters.  The most significant byte will be the
  *  character @a _C1.
  *
  *  @param[in] _C1 is the first character of the name
@@ -605,7 +605,7 @@ typedef enum {
  *  @param[in] node is the set of nodes to search.
  *  @param[in] id will contain the Id if the search is successful.
  *
- *  @return This method returns one of the values from the 
+ *  @return This method returns one of the values from the
  *          @ref Objects_Name_or_id_lookup_errors enumeration to indicate
  *          successful or failure.  On success @a id will contain the Id of
  *          the requested object.
@@ -626,7 +626,7 @@ Objects_Name_or_id_lookup_errors _Objects_Name_to_id_u32(
  *  @param[in] name is the name of the object to find.
  *  @param[in] id will contain the Id if the search is successful.
  *
- *  @return This method returns one of the values from the 
+ *  @return This method returns one of the values from the
  *          @ref Objects_Name_or_id_lookup_errors enumeration to indicate
  *          successful or failure.  On success @a id will contain the Id of
  *          the requested object.
@@ -646,7 +646,7 @@ Objects_Name_or_id_lookup_errors _Objects_Name_to_id_string(
  *  @param[in] id is the Id of the object whose name we are locating.
  *  @param[in] name will contain the name of the object, if found.
  *
- *  @return This method returns one of the values from the 
+ *  @return This method returns one of the values from the
  *          @ref Objects_Name_or_id_lookup_errors enumeration to indicate
  *          successful or failure.  On success @a name will contain the name of
  *          the requested object.
@@ -672,7 +672,7 @@ Objects_Name_or_id_lookup_errors _Objects_Id_to_name (
  *  @param[in] id is the Id of the object whose name we are locating.
  *  @param[in] location will contain an indication of success or failure.
  *
- *  @return This method returns one of the values from the 
+ *  @return This method returns one of the values from the
  *          @ref Objects_Name_or_id_lookup_errors enumeration to indicate
  *          successful or failure.  On success @a id will contain the Id of
  *          the requested object.
@@ -703,7 +703,7 @@ Objects_Control *_Objects_Get (
  *  @param[in] location will contain an indication of success or failure.
  *  @param[in] level is the interrupt level being turned.
  *
- *  @return This method returns one of the values from the 
+ *  @return This method returns one of the values from the
  *          @ref Objects_Name_or_id_lookup_errors enumeration to indicate
  *          successful or failure.  On success @a name will contain the name of
  *          the requested object.
@@ -732,7 +732,7 @@ Objects_Control *_Objects_Get_isr_disable(
  *
  *  @return This method returns a pointer to the object associated with ID.
  *
- *  @return This method returns one of the values from the 
+ *  @return This method returns one of the values from the
  *          @ref Objects_Name_or_id_lookup_errors enumeration to indicate
  *          successful or failure.  On success @a id will contain the id of
  *          the requested object.
@@ -762,7 +762,7 @@ Objects_Control *_Objects_Get_by_index (
  *  @param[in] id is the Id of the object whose name we are locating.
  *  @param[in] location will contain an indication of success or failure.
  *
- *  @return This method returns one of the values from the 
+ *  @return This method returns one of the values from the
  *          @ref Objects_Name_or_id_lookup_errors enumeration to indicate
  *          successful or failure.  On success @a id will contain the Id of
  *          the requested object.
@@ -786,7 +786,7 @@ Objects_Control *_Objects_Get_no_protection(
  *  @param[in] location_p will contain an indication of success or failure.
  *  @param[in] next_id_p is the Id of the next object we will look at.
  *
- *  @return This method returns the pointer to the object located or 
+ *  @return This method returns the pointer to the object located or
  *          NULL on error.
  */
 Objects_Control *_Objects_Get_next(

cpukit/score/include/rtems/score/objectmp.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/objectmp.h
  *
  *  This include file contains all the constants and structures associated

cpukit/score/include/rtems/score/priority.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/priority.h
  *
  *  This include file contains all thread priority manipulation routines.
@@ -26,8 +26,8 @@
  *  This handler encapsulates functionality which is used to manage
  *  thread priorities.  At the SuperCore level 256 priority levels
  *  are supported with lower numbers representing logically more important
- *  threads.  The priority level 0 is reserved for internal RTEMS use. 
+ *  threads.  The priority level 0 is reserved for internal RTEMS use.
- *  Typically it is assigned to threads which defer internal RTEMS 
+ *  Typically it is assigned to threads which defer internal RTEMS
  *  actions from an interrupt to thread level to improve interrupt response.
  *  Priority level 255 is assigned to the IDLE thread and really should not
  *  be used by application threads.  The default IDLE thread implementation

cpukit/score/include/rtems/score/stack.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/stack.h
  *
  *  This include file contains all information about the thread

cpukit/score/include/rtems/score/states.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/states.h
  *
  *  This include file contains thread execution state information.
@@ -21,7 +21,7 @@
 /**
  *  @defgroup ScoreStates Thread States Handler
  *
- *  This handler encapsulates functionality which relates to the management of 
+ *  This handler encapsulates functionality which relates to the management of
  *  the state bitmap associated with each thread.
  */
 /**@{*/
@@ -97,7 +97,7 @@ typedef uint32_t   States_Control;
                                  STATES_WAITING_FOR_JOIN_AT_EXIT       | \
                                  STATES_WAITING_FOR_SIGNAL             | \
                                  STATES_WAITING_FOR_BARRIER            | \
-                                 STATES_WAITING_FOR_RWLOCK             ) 
+                                 STATES_WAITING_FOR_RWLOCK             )
 
 /** This macro corresponds to a task waiting which is blocked on
  *  a thread queue. */

cpukit/score/include/rtems/score/sysstate.h

@@ -1,4 +1,4 @@
-/** 
+/**
  * @file
  *
  * @ingroup ScoreSysState
@@ -50,7 +50,7 @@ typedef enum {
   SYSTEM_STATE_BEFORE_MULTITASKING,
 
   /**
-   * @brief The system is attempting to initiate multitasking. 
+   * @brief The system is attempting to initiate multitasking.
    */
   SYSTEM_STATE_BEGIN_MULTITASKING,
 

cpukit/score/include/rtems/score/thread.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/thread.h
  *
  *  This include file contains all constants and structures associated
@@ -92,7 +92,7 @@ typedef void *Thread;
 
 /**
  *  @brief Type of the numeric argument of a thread entry function with at
- *  least one numeric argument. 
+ *  least one numeric argument.
  *
  *  This numeric argument type designates an unsigned integer type with the
  *  property that any valid pointer to void can be converted to this type and
@@ -274,13 +274,13 @@ typedef struct {
   /** This field contains any options in effect on this blocking operation. */
   uint32_t              option;
   /** This field will contain the return status from a blocking operation.
-   * 
+   *
    *  @note The following assumes that all API return codes can be
    *        treated as an uint32_t.
    */
   uint32_t              return_code;
 
-  /** This field is the chain header for the second through Nth tasks 
+  /** This field is the chain header for the second through Nth tasks
    *  of the same priority blocked waiting on the same object.
    */
   Chain_Control         Block2n;
@@ -377,7 +377,7 @@ struct Thread_Control_struct {
   /** This field is true if the thread is offered globally */
   bool                                  is_global;
 #endif
-  /** This field is is true if the post task context switch should be 
+  /** This field is is true if the post task context switch should be
    *  executed for this thread at the next context switch.
    */
   bool                                  do_post_task_switch_extension;

cpukit/score/include/rtems/score/threadmp.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/threadmp.h
  *
  *  This include file contains the specification for all routines
@@ -22,7 +22,7 @@
 /**
  *  @defgroup ScoreThreadMP Thread Handler Multiprocessing Support
  *
- *  This handler encapsulates functionality which is related to managing 
+ *  This handler encapsulates functionality which is related to managing
  *  threads in a multiprocessor system configuration.  This handler must
  *  manage proxies which represent remote threads blocking on local
  *  operations.

cpukit/score/include/rtems/score/threadq.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/threadq.h
  *
  *  This include file contains all the constants and structures associated
@@ -81,7 +81,7 @@ Thread_Control *_Thread_queue_Dequeue(
     _the_thread_queue, \
     _timeout, \
     _Thread_queue_Timeout )
-  
+
 
 /** @brief  Thread queue Enqueue
  *
@@ -192,7 +192,7 @@ Thread_blocking_operation_States _Thread_queue_Enqueue_priority (
 void _Thread_queue_Extract_priority_helper(
   Thread_queue_Control *the_thread_queue,
   Thread_Control       *the_thread,
-  bool                  requeuing 
+  bool                  requeuing
 );
 
 /**
@@ -273,7 +273,7 @@ void _Thread_queue_Timeout (
 /**
  * @brief Process Thread Queue Timeout
  *
- * This is a shared helper routine which makes it easier to have multiple 
+ * This is a shared helper routine which makes it easier to have multiple
  * object class specific timeout routines.
  *
  * @param[in] the_thread is the thread to extract

cpukit/score/include/rtems/score/threadsync.h

@@ -1,8 +1,8 @@
-/** 
+/**
  *  @file  rtems/score/threadsync.h
  *
  *  This include file contains all constants and structures associated
- *  with synchronizing a thread blocking operation with potential 
+ *  with synchronizing a thread blocking operation with potential
  *  actions in an ISR.
  */
 

cpukit/score/include/rtems/score/timespec.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/timespec.h
  *
  *  This include file contains helpers for manipulating timespecs.
@@ -89,7 +89,7 @@ extern "C" {
  *
  *  @param[in] time is the timespec instance to validate.
  *
- *  @return This method returns true if @a time is valid and 
+ *  @return This method returns true if @a time is valid and
  *          false otherwise.
  */
 bool _Timespec_Is_valid(
@@ -103,7 +103,7 @@ bool _Timespec_Is_valid(
  *  @param[in] lhs is the left hand side timespec
  *  @param[in] rhs is the right hand side timespec
  *
- *  @return This method returns true if @a lhs is less than the @a rhs and 
+ *  @return This method returns true if @a lhs is less than the @a rhs and
  *          false otherwise.
  */
 bool _Timespec_Less_than(
@@ -118,7 +118,7 @@ bool _Timespec_Less_than(
  *  @param[in] lhs is the left hand side timespec
  *  @param[in] rhs is the right hand side timespec
  *
- *  @return This method returns true if @a lhs is greater than the @a rhs and 
+ *  @return This method returns true if @a lhs is greater than the @a rhs and
  *          false otherwise.
  */
 bool _Timespec_Greater_than(
@@ -133,7 +133,7 @@ bool _Timespec_Greater_than(
  *  @param[in] lhs is the left hand side timespec
  *  @param[in] rhs is the right hand side timespec
  *
- *  @return This method returns true if @a lhs is equal to  @a rhs and 
+ *  @return This method returns true if @a lhs is equal to  @a rhs and
  *          false otherwise.
  */
 #define _Timespec_Equal_to( lhs, rhs ) \
@@ -147,7 +147,7 @@ bool _Timespec_Greater_than(
  *  to the first.
  *
  *  @param[in] time is the base time to be added to
- *  @param[in] add is the timespec to add to the first argument 
+ *  @param[in] add is the timespec to add to the first argument
  *
  *  @return This method returns the number of seconds @a time increased by.
  */
@@ -202,7 +202,7 @@ void _Timespec_Subtract(
 /** @brief Divide Timespec By Integer
  *
  *  This routine divides a timespec by an integer value.  The expected
- *  use is to assist in benchmark calculations where you typically 
+ *  use is to assist in benchmark calculations where you typically
  *  divide a duration by a number of iterations.
  *
  *  @param[in] time is the total
@@ -219,7 +219,7 @@ void _Timespec_Divide_by_integer(
 
 /** @brief Divide Timespec
  *
- *  This routine divides a timespec by another timespec.  The 
+ *  This routine divides a timespec by another timespec.  The
  *  intended use is for calculating percentages to three decimal points.
  *
  *  @param[in] lhs is the left hand number

cpukit/score/include/rtems/score/timestamp.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/timestamp.h
  *
  *  This include file contains helpers for manipulating timestamps.
@@ -48,7 +48,7 @@ extern "C" {
  *  NOTE: Eventually each port should select what it should use!!!
  *
  *  These control which implementation of SuperCore Timestamp is used.
- *  
+ *
  *  if defined(CPU_RTEMS_SCORE_TIMESTAMP_IS_STRUCT_SPEC)
  *     struct timespec is used
  *  else if defined(CPU_RTEMS_SCORE_TIMESTAMP_IS_INT64)
@@ -63,26 +63,26 @@ extern "C" {
  *  Performance of int64_t versus struct timespec
  *  =============================================
  *
- *  On PowerPC/psim, inlined int64_t saves ~50 instructions on each 
+ *  On PowerPC/psim, inlined int64_t saves ~50 instructions on each
  *    _Thread_Dispatch operation which results in a context switch.
  *    This works out to be about 10% faster dispatches and 7.5% faster
  *    blocking semaphore obtains.  The following numbers are in instructions
  *    and from tm02 and tm26.
  *
- *                         timespec  int64  inlined int64 
+ *                         timespec  int64  inlined int64
  *    dispatch:              446      446      400
  *    blocking sem obtain:   627      626      581
  *
  *  On SPARC/sis, inlined int64_t shows the same percentage gains.
  *    The following numbers are in microseconds and from tm02 and tm26.
  *
- *                         timespec  int64  inlined int64 
+ *                         timespec  int64  inlined int64
  *    dispatch:               59       61       53
  *    blocking sem obtain:    98      100       92
  *
  *  Inlining appears to have a tendency to increase the size of
  *    some executables.
- *  Not inlining reduces the execution improvement but does not seem to 
+ *  Not inlining reduces the execution improvement but does not seem to
  *    be an improvement on the PowerPC and SPARC. The struct timespec
  *    and the executables with int64 not inlined are about the same size.
  *
@@ -168,7 +168,7 @@ extern "C" {
  *
  *  @param[in] _time points to the timestamp instance to validate.
  *
- *  @return This method returns true if @a time is valid and 
+ *  @return This method returns true if @a time is valid and
  *          false otherwise.
  */
 #if defined(CPU_RTEMS_SCORE_TIMESTAMP_IS_STRUCT_SPEC)
@@ -186,7 +186,7 @@ extern "C" {
  *  @param[in] _lhs points to the left hand side timestamp
  *  @param[in] _rhs points to the right hand side timestamp
  *
- *  @return This method returns true if @a _lhs is less than the @a _rhs and 
+ *  @return This method returns true if @a _lhs is less than the @a _rhs and
  *          false otherwise.
  */
 #if defined(CPU_RTEMS_SCORE_TIMESTAMP_IS_STRUCT_SPEC)
@@ -204,7 +204,7 @@ extern "C" {
  *  @param[in] _lhs points to the left hand side timestamp
  *  @param[in] _rhs points to the right hand side timestamp
  *
- *  @return This method returns true if @a _lhs is greater than the @a _rhs and 
+ *  @return This method returns true if @a _lhs is greater than the @a _rhs and
  *          false otherwise.
  */
 #if defined(CPU_RTEMS_SCORE_TIMESTAMP_IS_STRUCT_SPEC)
@@ -222,7 +222,7 @@ extern "C" {
  *  @param[in] _lhs points to the left hand side timestamp
  *  @param[in] _rhs points to the right hand side timestamp
  *
- *  @return This method returns true if @a _lhs is equal to  @a _rhs and 
+ *  @return This method returns true if @a _lhs is equal to  @a _rhs and
  *          false otherwise.
  */
 #if defined(CPU_RTEMS_SCORE_TIMESTAMP_IS_STRUCT_SPEC)
@@ -239,7 +239,7 @@ extern "C" {
  *  to the first.
  *
  *  @param[in] _time points to the base time to be added to
- *  @param[in] _add points to the timestamp to add to the first argument 
+ *  @param[in] _add points to the timestamp to add to the first argument
  *
  *  @return This method returns the number of seconds @a time increased by.
  */
@@ -255,7 +255,7 @@ extern "C" {
  *
  *  This routine adds two timestamps.  The second argument is added
  *  to the first.
- *  
+ *
  *  @node This routine places a special requirement on the addition
  *        operation.  It must return the number of units that the
  *        seconds field changed as the result of the addition.  Since this
@@ -263,7 +263,7 @@ extern "C" {
  *        it is generally safe to assume that only one second changed.
  *
  *  @param[in] _time points to the base time to be added to
- *  @param[in] _add points to the timestamp to add to the first argument 
+ *  @param[in] _add points to the timestamp to add to the first argument
  *
  *  @return This method returns the number of seconds @a time increased by.
  */
@@ -331,7 +331,7 @@ extern "C" {
 /** @brief Divide Timestamp By Integer
  *
  *  This routine divides a timestamp by an integer value.  The expected
- *  use is to assist in benchmark calculations where you typically 
+ *  use is to assist in benchmark calculations where you typically
  *  divide a duration by a number of iterations.
  *
  *  @param[in] _time points to the total
@@ -350,7 +350,7 @@ extern "C" {
 
 /** @brief Divide Timestamp
  *
- *  This routine divides a timestamp by another timestamp.  The 
+ *  This routine divides a timestamp by another timestamp.  The
  *  intended use is for calculating percentages to three decimal points.
  *
  *  @param[in] _lhs points to the left hand number
@@ -410,7 +410,7 @@ extern "C" {
 #if defined(CPU_RTEMS_SCORE_TIMESTAMP_IS_STRUCT_SPEC)
   /* in this case we know they are the same type so use simple assignment */
   #define _Timestamp_To_timespec( _timestamp, _timespec  ) \
-          *(_timespec) = *(_timestamp) 
+          *(_timespec) = *(_timestamp)
 #else
   #define _Timestamp_To_timespec( _timestamp, _timespec  ) \
 	  _Timestamp64_To_timespec( _timestamp, _timespec  )

cpukit/score/include/rtems/score/timestamp64.h

@@ -1,7 +1,7 @@
-/** 
+/**
  *  @file  rtems/score/timestamp64.h
  *
- *  This include file contains helpers for manipulating 
+ *  This include file contains helpers for manipulating
  *  64-bit integer timestamps.
  */
 
@@ -96,7 +96,7 @@ typedef int64_t Timestamp64_Control;
  *
  *  @param[in] _time points to the timestamp instance to validate.
  *
- *  @return This method returns true if @a time is valid and 
+ *  @return This method returns true if @a time is valid and
  *          false otherwise.
  */
 #define _Timestamp64_Is_valid( _time ) \
@@ -109,7 +109,7 @@ typedef int64_t Timestamp64_Control;
  *  @param[in] _lhs points to the left hand side timestamp
  *  @param[in] _rhs points to the right hand side timestamp
  *
- *  @return This method returns true if @a _lhs is less than the @a _rhs and 
+ *  @return This method returns true if @a _lhs is less than the @a _rhs and
  *          false otherwise.
  */
 #if defined(CPU_RTEMS_SCORE_TIMESTAMP_INT64_INLINE)
@@ -129,7 +129,7 @@ typedef int64_t Timestamp64_Control;
  *  @param[in] _lhs points to the left hand side timestamp
  *  @param[in] _rhs points to the right hand side timestamp
  *
- *  @return This method returns true if @a _lhs is greater than the @a _rhs and 
+ *  @return This method returns true if @a _lhs is greater than the @a _rhs and
  *          false otherwise.
  */
 #if defined(CPU_RTEMS_SCORE_TIMESTAMP_INT64_INLINE)
@@ -149,7 +149,7 @@ typedef int64_t Timestamp64_Control;
  *  @param[in] _lhs points to the left hand side timestamp
  *  @param[in] _rhs points to the right hand side timestamp
  *
- *  @return This method returns true if @a _lhs is equal to  @a _rhs and 
+ *  @return This method returns true if @a _lhs is equal to  @a _rhs and
  *          false otherwise.
  */
 #if defined(CPU_RTEMS_SCORE_TIMESTAMP_INT64_INLINE)
@@ -168,7 +168,7 @@ typedef int64_t Timestamp64_Control;
  *  to the first.
  *
  *  @param[in] _time points to the base time to be added to
- *  @param[in] _add points to the timestamp to add to the first argument 
+ *  @param[in] _add points to the timestamp to add to the first argument
  *
  *  @return This method returns the number of seconds @a time increased by.
  */
@@ -186,7 +186,7 @@ typedef int64_t Timestamp64_Control;
  *
  *  This routine adds two timestamps.  The second argument is added
  *  to the first.
- *  
+ *
  *  @node This routine places a special requirement on the addition
  *        operation.  It must return the number of units that the
  *        seconds field changed as the result of the addition.  Since this
@@ -194,7 +194,7 @@ typedef int64_t Timestamp64_Control;
  *        it is generally safe to assume that only one second changed.
  *
  *  @param[in] _time points to the base time to be added to
- *  @param[in] _add points to the timestamp to add to the first argument 
+ *  @param[in] _add points to the timestamp to add to the first argument
  *
  *  @return This method returns the number of seconds @a time increased by.
  */
@@ -265,7 +265,7 @@ void _Timestamp64_From_ticks(
 /** @brief Divide Timestamp By Integer
  *
  *  This routine divides a timestamp by an integer value.  The expected
- *  use is to assist in benchmark calculations where you typically 
+ *  use is to assist in benchmark calculations where you typically
  *  divide a duration by a number of iterations.
  *
  *  @param[in] _time points to the total
@@ -289,7 +289,7 @@ void _Timestamp64_From_ticks(
 
 /** @brief Divide Timestamp
  *
- *  This routine divides a timestamp by another timestamp.  The 
+ *  This routine divides a timestamp by another timestamp.  The
  *  intended use is for calculating percentages to three decimal points.
  *
  *  @param[in] _lhs points to the left hand number

cpukit/score/include/rtems/score/tod.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/tod.h
  *
  *  This include file contains all the constants and structures associated
@@ -112,7 +112,7 @@ extern "C" {
 /**
  *  @defgroup ScoreTOD Time Of Day (TOD) Handler
  *
- *  This handler encapsulates functionality used to manage time of day. 
+ *  This handler encapsulates functionality used to manage time of day.
  */
 /**@{*/
 
@@ -158,7 +158,7 @@ void _TOD_Set(
 /** @brief _TOD_Get
  *
  *  This routine returns the current time of day with potential accuracy
- *  to the nanosecond.  
+ *  to the nanosecond.
  *
  *  @param[in] time is a pointer to the time to be returned
  */
@@ -169,7 +169,7 @@ void _TOD_Get(
 /** @brief _TOD_Get_uptime
  *
  *  This routine returns the system uptime with potential accuracy
- *  to the nanosecond.  
+ *  to the nanosecond.
  *
  *  @param[in] time is a pointer to the uptime to be returned
  */
@@ -180,7 +180,7 @@ void _TOD_Get_uptime(
 /** @brief _TOD_Get_uptime_as_timespec
  *
  *  This routine returns the system uptime with potential accuracy
- *  to the nanosecond.  
+ *  to the nanosecond.
  *
  *  @param[in] time is a pointer to the uptime to be returned
  */

cpukit/score/include/rtems/score/tqdata.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/tqdata.h
  *
  *  This include file contains all the constants and structures

cpukit/score/include/rtems/score/userext.h

@@ -139,7 +139,7 @@ typedef void( *User_extensions_thread_restart_extension )(
  * The context switches initiated through _Thread_Start_multitasking() and
  * _Thread_Stop_multitasking() are not covered by this extension.  The
  * executing thread may run with a minimal setup, for example with a freed task
- * stack. 
+ * stack.
  */
 typedef void( *User_extensions_thread_switch_extension )(
   Thread_Control *,

cpukit/score/include/rtems/score/watchdog.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/watchdog.h
  *
  *  This include file contains all the constants and structures associated
@@ -58,7 +58,7 @@ typedef uint32_t   Watchdog_Interval;
 typedef uint32_t (*Watchdog_Nanoseconds_since_last_tick_routine)(void);
 
 /** @brief Watchdog Service Routine Return Type
- * 
+ *
  *  This type defines the return type from a Watchdog Service Routine.
  */
 typedef void Watchdog_Service_routine;
@@ -197,7 +197,7 @@ void _Watchdog_Handler_initialization( void );
  *
  *  This routine removes @a the_watchdog from the watchdog chain on which
  *  it resides and returns the state @a the_watchdog timer was in.
- *  
+ *
  *  @param[in] the_watchdog will be removed
  *  @return the state in which @a the_watchdog was in when removed
  */
@@ -242,7 +242,7 @@ void _Watchdog_Adjust_to_chain(
 /** @brief Watchdog Insert
  *
  *  This routine inserts @a the_watchdog into the @a header watchdog chain
- *  for a time of @a units.  
+ *  for a time of @a units.
  *
  *  @param[in] header is @a the_watchdog list to insert @a the_watchdog on
  *  @param[in] the_watchdog is the watchdog to insert

cpukit/score/include/rtems/score/wkspace.h

@@ -1,4 +1,4 @@
-/** 
+/**
  *  @file  rtems/score/wkspace.h
  *
  *  This include file contains information related to the
@@ -37,7 +37,7 @@ extern "C" {
 
 /** @brief Executive Workspace Control
  *
- *  The is the heap control structure that used to manage the 
+ *  The is the heap control structure that used to manage the
  *  RTEMS Executive Workspace.
  */
 SCORE_EXTERN Heap_Control _Workspace_Area;  /* executive heap header */