Files
rt-thread/bsp/gd32/arm/gd32e230-lckfb/board/linker_scripts/link.icf
2025-07-31 17:27:18 +08:00

51 lines
2.2 KiB
Plaintext

/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
/*
* IMPORTANT: Please check your specific chip's datasheet for correct memory sizes.
* The following values are for a GD32E230 with 64KB Flash and 8KB SRAM.
*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0800FFFF; /* 64KB Flash */
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x20001FFF; /* 8KB SRAM */
/*-Sizes-*/
/*
* The CSTACK is used for main function before scheduler start and for interrupt handlers.
* The HEAP is the C library heap, which is rarely used in RT-Thread.
* RT-Thread uses the remaining RAM for its own dynamic memory heap.
*/
define symbol __ICFEDIT_size_cstack__ = 0x400; /* 1024 bytes, a safer size */
define symbol __ICFEDIT_size_heap__ = 0x100; /* 256 bytes, can be smaller */
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
/* Remove the non-existent RAM1 region */
/* define region RAM1_region = mem:[from __region_RAM1_start__ to __region_RAM1_end__]; */
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
/* Keep RT-Thread FinSH command symbols */
keep { section FSymTab };
keep { section VSymTab };
keep { section .rti_fn* };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };
/* Remove placement in the non-existent RAM1 region */
/* place in RAM1_region { section .sram }; */