doxygen: add comments for lwp shared memory APIs

Add Doxygen-style comments for the lwp shared memory public APIs
in components/lwp/lwp_shm.c and the related control structure.
This change is documentation-only and does not modify any runtime
behavior or logic.

Signed-off-by: ibvqeibob <2601187225@qq.com>

.github/ALL_BSP_COMPILE.json

@@ -160,6 +160,7 @@
         "stm32/stm32f407-atk-explorer",
         "stm32/stm32f407-robomaster-c",
         "stm32/stm32f407-st-discovery",
+        "stm32/stm32f407-micu",
         "stm32/stm32f410-st-nucleo",
         "stm32/stm32f411-st-nucleo",
         "stm32/stm32f411-atk-nano",

MAINTAINERS

@@ -147,6 +147,10 @@ tag: bsp_stm32f429-atk-apollo
 path: bsp/stm32/stm32f429-atk-apollo
 owners: lizhen9880(lizhen9880)<lizhen9880@126.com>
 
+tag: bsp_stm32f407-micu
+path: bsp/stm32/stm32f407-micu
+owners: DaiLingxiang(Dailingxiang1)<3070269033@qq.com>
+
 tag: bsp_stm32h723-st-nucleo
 path: bsp/stm32/stm32h723-st-nucleo
 owners: 下里巴人(hywing)<hywing.sir@qq.com>

bsp/Vango/.clang-format-ignore

@@ -0,0 +1,9 @@
+
+# files format check exclude path, please follow the instructions below to modify;
+# If you need to exclude an entire folder, add the folder path in dir_path;
+# If you need to exclude a file, add the path to the file in file_path.
+
+# 从 .ignore_format.yml 迁移的规则
+
+/v85xx*/Libraries/CMSIS/
+/v85xx*/Libraries/VangoV85xx*_standard_peripheral/

bsp/microchip/.clang-format-ignore

@@ -2,6 +2,5 @@
 # If you need to exclude an entire folder, add the folder path in dir_path;
 # If you need to exclude a file, add the path to the file in file_path.
 
-dir_path:
+# 从 .ignore_format.yml 迁移的规则
-- CMSIS
+/sam*/bsp/
-- VangoV85xx_standard_peripheral

bsp/microchip/samd51-seeed-wio-terminal/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- bsp

bsp/microchip/same54/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- bsp

bsp/microchip/same70/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- bsp

bsp/microchip/saml10/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- bsp

bsp/mm32f103x/.clang-format-ignore

@@ -1,7 +1,7 @@
+
 # files format check exclude path, please follow the instructions below to modify;
 # If you need to exclude an entire folder, add the folder path in dir_path;
 # If you need to exclude a file, add the path to the file in file_path.
 
-dir_path:
+# 从 .ignore_format.yml 迁移的规则
-- Libraries/N32_Std_Driver
+/Libraries/
-

bsp/mm32f103x/.ignore_format.yml

@@ -1,4 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-
-dir_path:
-- Libraries

bsp/mm32f327x/.clang-format-ignore

@@ -1,9 +1,7 @@
+
 # files format check exclude path, please follow the instructions below to modify;
 # If you need to exclude an entire folder, add the folder path in dir_path;
 # If you need to exclude a file, add the path to the file in file_path.
 
-file_path:
+# 从 .ignore_format.yml 迁移的规则
-
+/Libraries/
-
-dir_path:
-- Libraries

bsp/mm32f327x/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- Libraries

bsp/mm32f526x/.clang-format-ignore

@@ -1,6 +1,7 @@
+
 # files format check exclude path, please follow the instructions below to modify;
 # If you need to exclude an entire folder, add the folder path in dir_path;
 # If you need to exclude a file, add the path to the file in file_path.
 
-dir_path:
+# 从 .ignore_format.yml 迁移的规则
-- bsp
+/Libraries/

bsp/mm32f526x/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- Libraries

bsp/mm32l07x/.clang-format-ignore

@@ -2,6 +2,5 @@
 # If you need to exclude an entire folder, add the folder path in dir_path;
 # If you need to exclude a file, add the path to the file in file_path.
 
-dir_path:
+# 从 .ignore_format.yml 迁移的规则
-- CMSIS
+/Libraries/
-- VangoV85xxP_standard_peripheral

bsp/mm32l3xx/.clang-format-ignore

@@ -2,5 +2,5 @@
 # If you need to exclude an entire folder, add the folder path in dir_path;
 # If you need to exclude a file, add the path to the file in file_path.
 
-dir_path:
+# 从 .ignore_format.yml 迁移的规则
-- bsp
+/Libraries/

bsp/n32/.clang-format-ignore

@@ -0,0 +1,7 @@
+
+# files format check exclude path, please follow the instructions below to modify;
+# If you need to exclude an entire folder, add the folder path in dir_path;
+# If you need to exclude a file, add the path to the file in file_path.
+
+# 从 .ignore_format.yml 迁移的规则
+/libraries/N32G45x_Firmware_Library/

bsp/n32/libraries/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- N32G45x_Firmware_Library

bsp/n32g452xx/.clang-format-ignore

@@ -0,0 +1,7 @@
+
+# files format check exclude path, please follow the instructions below to modify;
+# If you need to exclude an entire folder, add the folder path in dir_path;
+# If you need to exclude a file, add the path to the file in file_path.
+
+# 从 .ignore_format.yml 迁移的规则
+/Libraries/N32_Std_Driver/

bsp/nxp/.clang-format-ignore

@@ -0,0 +1,17 @@
+
+# files format check exclude path, please follow the instructions below to modify;
+# If you need to exclude an entire folder, add the folder path in dir_path;
+# If you need to exclude a file, add the path to the file in file_path.
+
+# 从 .ignore_format.yml 迁移的规则
+/imx/imxrt/imxrt1060-nxp-evk/board/board.c/
+/imx/imxrt/imxrt1060-nxp-evk/board/MCUX_Config/
+/imx/imxrt/imxrt1060-nxp-evk/xip/
+
+/imx/imxrt/libraries/MIMXRT1060/
+
+/lpc/lpc55sxx/Libraries/LPC55*/
+
+/mcx/mcxa/Libraries/MCXA153/
+/mcx/mcxc/Libraries/MCXC444/
+/mcx/mcxn/Libraries/MCXN947/

bsp/renesas/.clang-format-ignore

@@ -1,4 +1,14 @@
-# clang-format ignore file  
+# .clang-format-ignore File Description:
+# ----------------------------------------------------------------------------------------
+# 1. Used to specify which files or directories should be skipped by the clang-format tool.
+# 2. Follows syntax rules similar to .gitignore.
+# 3. Supports wildcard patterns and path matching.
+# 4. clang-format will recursively apply the .clang-format-ignore rules.
+
+# Renesas Vendor library
+<<<<<<< HEAD
 /**/ra/
 /**/ra_cfg/
-/**/ra_gen/
+/**/ra_gen/
+/libraries/bsp-template/
+/**/RTE/

bsp/renesas/libraries/bsp-template/.ignore_format.yml

@@ -1,9 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- ra
-- ra_gen
-- ra_cfg
-- RTE

bsp/rockchip/.clang-format-ignore

@@ -0,0 +1,9 @@
+# .clang-format-ignore File Description:
+# ----------------------------------------------------------------------------------------
+# 1. Used to specify which files or directories should be skipped by the clang-format tool.
+# 2. Follows syntax rules similar to .gitignore.
+# 3. Supports wildcard patterns and path matching.
+# 4. clang-format will recursively apply the .clang-format-ignore rules.
+
+
+/common/rk_hal/

bsp/rockchip/common/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- rk_hal

bsp/stm32/.clang-format-ignore

@@ -0,0 +1,12 @@
+
+# files format check exclude path, please follow the instructions below to modify;
+# If you need to exclude an entire folder, add the folder path in dir_path;
+# If you need to exclude a file, add the path to the file in file_path.
+
+# 从 .ignore_format.yml 迁移的规则
+# 忽略所有 STM32 HAL 库目录
+/libraries/STM32*_HAL/
+
+# 忽略所有 STM32 BSP 的 CubeMX 配置目录
+/stm32*/board/CubeMX_Config/
+

bsp/stm32/libraries/.ignore_format.yml

@@ -1,23 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- STM32F0xx_HAL
-- STM32F1xx_HAL
-- STM32F2xx_HAL
-- STM32F3xx_HAL
-- STM32F4xx_HAL
-- STM32F7xx_HAL
-- STM32G0xx_HAL
-- STM32G4xx_HAL
-- STM32H7xx_HAL
-- STM32L0xx_HAL
-- STM32L1xx_HAL
-- STM32L4xx_HAL
-- STM32L5xx_HAL
-- STM32MPxx_HAL
-- STM32U5xx_HAL
-- STM32H5xx_HAL
-- STM32WBxx_HAL
-- STM32WLxx_HAL

bsp/stm32/libraries/HAL_Drivers/drivers/drv_can.c

@@ -472,11 +472,23 @@ static rt_err_t _can_control(struct rt_can_device *can, int cmd, void *arg)
         argval = (rt_uint32_t) arg;
         if (argval == 0)
         {
-            HAL_CAN_Stop(&drv_can->CanHandle);
+            if (HAL_CAN_DeInit(&drv_can->CanHandle) != HAL_OK)
+            {
+                LOG_E("CAN deinitialization failed");
+                return -RT_ERROR;
+            }
         }
         else
         {
-            HAL_CAN_Start(&drv_can->CanHandle);
+            rt_err_t result = _can_config(&drv_can->device, &drv_can->device.config);
+            if (result != RT_EOK)
+            {
+                return result;
+            }
+            if (HAL_CAN_Start(&drv_can->CanHandle) != HAL_OK)
+            {
+                return -RT_ERROR;
+            }
         }
 
         break;
@@ -515,32 +527,31 @@ static rt_ssize_t _can_sendmsg(struct rt_can_device *can, const void *buf, rt_ui
             (state == HAL_CAN_STATE_LISTENING))
     {
         /*check select mailbox  is empty */
+        uint32_t mailbox_mask;
+        uint32_t tme_flag;
+
         switch (1 << box_num)
         {
         case CAN_TX_MAILBOX0:
-            if (HAL_IS_BIT_SET(hcan->Instance->TSR, CAN_TSR_TME0) != SET)
+            mailbox_mask = CAN_TX_MAILBOX0;
-            {
+            tme_flag = CAN_TSR_TME0;
-                /* Return function status */
-                return -RT_ERROR;
-            }
             break;
         case CAN_TX_MAILBOX1:
-            if (HAL_IS_BIT_SET(hcan->Instance->TSR, CAN_TSR_TME1) != SET)
+            mailbox_mask = CAN_TX_MAILBOX1;
-            {
+            tme_flag = CAN_TSR_TME1;
-                /* Return function status */
-                return -RT_ERROR;
-            }
             break;
         case CAN_TX_MAILBOX2:
-            if (HAL_IS_BIT_SET(hcan->Instance->TSR, CAN_TSR_TME2) != SET)
+            mailbox_mask = CAN_TX_MAILBOX2;
-            {
+            tme_flag = CAN_TSR_TME2;
-                /* Return function status */
-                return -RT_ERROR;
-            }
             break;
         default:
             RT_ASSERT(0);
-            break;
+            return -RT_ERROR;
+        }
+
+        if (HAL_IS_BIT_SET(hcan->Instance->TSR, tme_flag) != SET)
+        {
+            return -RT_ERROR;
         }
 
         if (RT_CAN_STDID == pmsg->ide)

bsp/stm32/libraries/templates/stm32l5xx/board/.ignore_format.yml

@@ -1,7 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config
-- linker_scripts

bsp/stm32/stm32f072-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f091-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-atk-nano/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-atk-warshipv3/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-blue-pill/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-dofly-M3S/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-dofly-lyc8/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-fire-arbitrary/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-gizwits-gokitv21/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-hw100k-ibox/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-keysking-learning/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-onenet-nbiot/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-yf-ufun/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f107-uc-eval/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f207-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f302-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f334-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f401-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f405-smdz-breadfruit/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f407-armfly-v5/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f407-atk-explorer/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f407-lckfb-skystar/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f407-micu/.gitignore

@@ -0,0 +1,42 @@
+*.pyc
+*.map
+*.dblite
+*.elf
+*.bin
+*.hex
+*.axf
+*.exe
+*.pdb
+*.idb
+*.ilk
+*.old
+build
+Debug
+documentation/html
+packages/
+*~
+*.o
+*.obj
+*.out
+*.bak
+*.dep
+*.lib
+*.i
+*.d
+.DS_Stor*
+.config 3
+.config 4
+.config 5
+Midea-X1
+*.uimg
+GPATH
+GRTAGS
+GTAGS
+.vscode
+JLinkLog.txt
+JLinkSettings.ini
+DebugConfig/
+RTE/
+settings/
+*.uvguix*
+cconfig.h

bsp/stm32/stm32f407-micu/Kconfig

@@ -0,0 +1,15 @@
+mainmenu "RT-Thread Configuration"
+
+BSP_DIR := .
+
+RTT_DIR := ../../..
+
+PKGS_DIR := packages
+
+source "$(RTT_DIR)/Kconfig"
+osource "$PKGS_DIR/Kconfig"
+rsource "../libraries/Kconfig"
+
+if !RT_USING_NANO
+rsource "board/Kconfig"
+endif

bsp/stm32/stm32f407-micu/README.md

@@ -0,0 +1,137 @@
+# 米醋·McoreSTM32电控板 BSP 说明
+
+## 简介
+
+本文档为 **米醋·McoreSTM32电控板** 的 BSP (板级支持包) 说明。
+
+主要内容如下：
+
+- 开发板资源介绍
+- BSP 快速上手
+- 进阶使用方法
+
+通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
+
+## 开发板介绍
+
+STM32F407VET6是一款泛用性很高的芯片，基于 ARM Cortex-M4 内核的 32 位微控制器，属于 STM32 系列。它具有高性能、低功耗和丰富的外设，非常适合用于各种嵌入式应用。我们基于这款芯片设计出一块核心板用于嵌入式学习，板载了GD32芯片，搭载DAP-LINK，可用于keil下载调试。板子上还预留一个三色LED、一个用户按键、一个4M的FLASH、一个TF卡槽，此外还搭载了比较常用的传感器，温湿度传感器和姿态传感器。
+
+开发板外观如下图所示：
+
+![board](figures/board.png)
+
+该开发板常用 **板载资源** 如下：
+
+- MCU：STM32F407VET6，主频 168MHz，512KB FLASH ，192KB RAM
+- 外部 FLASH：ZD25WQ32，4MB
+- 常用外设
+  - LED：3个，DS0（红色，PC2），DS1（绿色，PC1），DS2（蓝色，PC0）
+  - 按键：1个，USER（PC3）
+- 常用接口：USB 转串口、SD 卡接口等
+- 调试接口，支持SWD（板载DAPLink）
+
+开发板更多详细信息请参考【立创开源硬件平台】 [米醋·McoreSTM32电控板](https://oshwhub.com/the-first-development-team-of-no/kong-zhi-ban)。
+
+## 外设支持
+
+本 BSP 目前对外设的支持情况如下：
+
+| **板载外设**      | **支持情况** | **备注**                              |
+| :----------------- | :----------: | :------------------------------------- |
+| DAPLink虚拟串口        |     支持     | 已连接到芯片的UART1（PA9,PA10）                                      |
+| 三色LED(RGB)        |     支持     | 作为系统状态指示灯                                      |
+| 按键         |     暂不支持     | 即将支持                                      |
+| SPI Flash         |     暂不支持     | 即将支持                                      |
+| TF卡              |   暂不支持   | 即将支持                                      |
+| CAN               |   暂不支持   | 即将支持                                      |
+| ICM-20608-G               |   暂不支持   | 即将支持                                      |
+| AHT20               |   暂不支持   |即将支持                                       |
+| **片上外设**      | **支持情况** | **备注**                              |
+| GPIO              |     支持     | 所有GPIO引脚 |
+| UART              |     支持     | UART1                         |
+| SPI               |     暂不支持     | 即将支持                              |
+| I2C               |     暂不支持     | 即将支持                              |
+| SDIO              |   暂不支持   | 即将支持                              |
+| RTC               |   暂不支持   | 即将支持                              |
+| PWM               |   暂不支持   | 即将支持                              |
+| USB Device        |   暂不支持   | 即将支持                              |
+| USB Host          |   暂不支持   | 即将支持                              |
+| IWG               |   暂不支持   | 即将支持                              |
+| **扩展模块**      | **支持情况** | **备注**                              |
+|     舵机      |   暂不支持   | 即将支持                                     |
+|     编码电机      |   暂不支持   | 即将支持                                     |
+|     步进电机      |   暂不支持   | 即将支持                                   |
+|     蓝牙      |   暂不支持   |即将支持                                     |
+|     CAM      |   暂不支持   | 即将支持                                     |
+|     OLED      |   暂不支持   | 即将支持                                     |
+|     陀螺仪      |   暂不支持   | 即将支持                                     |
+|     八路灰度      |   暂不支持   | 即将支持                                     |
+|     LED灯      |   暂不支持   | 即将支持                                     |
+|     按键      |   暂不支持   | 即将支持                                     |
+
+## 使用说明
+
+使用说明分为如下两个章节：
+
+- 快速上手
+
+    本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
+
+- 进阶使用
+
+    本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
+
+
+### 快速上手
+
+本 BSP 为开发者提供 MDK4、MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
+
+#### 硬件连接
+
+使用数据线连接开发板到 PC，打开电源开关。
+
+#### 编译下载
+##### 请注意！！！
+在执行编译工作前请先打开ENV执行以下指令（该指令用于拉取必要的HAL库及CMSIS库，否则无法通过编译）：
+```bash
+pkgs --update
+```
+双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
+> 工程默认配置使用 DAPLink 仿真器下载程序，在通过 USB 连接开发板的基础上，点击下载按钮即可下载程序到开发板
+
+#### 运行结果
+
+下载程序成功之后，系统会自动运行，【开发板上的三色LED会以1HZ的频率闪烁】。
+
+连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
+
+```bash
+ \ | /
+- RT -     Thread Operating System
+ / | \     5.2.2 build Nov  8 2025 16:39:56
+ 2006 - 2024 Copyright by rt-thread team
+msh >
+```
+### 进阶使用
+
+此 BSP 默认只开启了 GPIO 和 串口1 的功能，如果需使用 SD 卡、Flash 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
+
+1. 在 bsp 下打开 env 工具。
+
+2. 输入`menuconfig`命令配置工程，配置好之后保存退出。
+
+3. 输入`pkgs --update`命令更新软件包。
+
+4. 输入`scons --target=mdk4/mdk5/iar` 命令重新生成工程。
+
+本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。
+
+## 注意事项
+
+- 暂无
+
+## 联系人信息
+
+维护人:
+
+-  [戴凌祥](https://gitee.com/dai-lingxiang), 邮箱：<3070269033@qq.com>

bsp/stm32/stm32f407-micu/SConscript

@@ -0,0 +1,15 @@
+# for module compiling
+import os
+Import('RTT_ROOT')
+from building import *
+
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')

bsp/stm32/stm32f407-micu/SConstruct

@@ -0,0 +1,76 @@
+import os
+import sys
+import rtconfig
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..')
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+try:
+    from building import *
+except:
+    print('Cannot found RT-Thread root directory, please check RTT_ROOT')
+    print(RTT_ROOT)
+    exit(-1)
+
+def bsp_pkg_check():
+    import subprocess
+
+    check_paths = [
+        os.path.join("packages", "CMSIS-Core-latest"),
+        os.path.join("packages", "stm32f4_cmsis_driver-latest"),
+        os.path.join("packages", "stm32f4_hal_driver-latest")
+    ]
+
+    need_update = not all(os.path.exists(p) for p in check_paths)
+
+    if need_update:
+        print("\n===============================================================================")
+        print("Dependency packages missing, please running 'pkgs --update'...")
+        print("If no packages are fetched, run 'pkgs --upgrade' first, then 'pkgs --update'...")
+        print("===============================================================================")
+        exit(1)
+
+RegisterPreBuildingAction(bsp_pkg_check)
+
+TARGET = 'rt-thread.' + rtconfig.TARGET_EXT
+
+DefaultEnvironment(tools=[])
+env = Environment(tools = ['mingw'],
+    AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+    CC = rtconfig.CC, CFLAGS = rtconfig.CFLAGS,
+    AR = rtconfig.AR, ARFLAGS = '-rc',
+    CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
+    LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+if rtconfig.PLATFORM in ['iccarm']:
+    env.Replace(CCCOM = ['$CC $CFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
+    env.Replace(ARFLAGS = [''])
+    env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map')
+
+Export('env')
+Export('RTT_ROOT')
+Export('rtconfig')
+
+SDK_ROOT = os.path.abspath('./')
+
+if os.path.exists(SDK_ROOT + '/libraries'):
+    libraries_path_prefix = SDK_ROOT + '/libraries'
+else:
+    libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
+
+rtconfig.BSP_LIBRARY_TYPE = None
+
+# include drivers
+objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript'),variant_dir='build/libraries/HAL_Drivers', duplicate=0))
+
+#objs.extend(SConscript(os.path.join(os.getcwd(), 'board', 'ports', 'SConscript')))
+
+# make a building
+DoBuilding(TARGET, objs)

bsp/stm32/stm32f407-micu/applications/SConscript

@@ -0,0 +1,15 @@
+from building import *
+import os
+
+cwd = GetCurrentDir()
+src = Glob('*.c')
+CPPPATH = [cwd]
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+list = os.listdir(cwd)
+for item in list:
+    if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
+        group = group + SConscript(os.path.join(item, 'SConscript'))
+
+Return('group')

bsp/stm32/stm32f407-micu/applications/main.c

@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2006-2024, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2025-11-08     Dailingxiang   first version
+ */
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <board.h>
+
+/* defined the LED0 pin: PC2 */
+#define LED0_PIN    GET_PIN(C, 2)
+/* defined the LED1 pin: PC1 */
+#define LED1_PIN        GET_PIN(C, 1)
+/* defined the LED2 pin: PC0 */
+#define LED2_PIN        GET_PIN(C, 0)
+
+int main(void)
+{
+    /* set LED0 pin mode to output */
+    rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
+    /* set LED1 pin mode to output */
+    rt_pin_mode(LED1_PIN, PIN_MODE_OUTPUT);
+    /* set LED2 pin mode to output */
+    rt_pin_mode(LED2_PIN, PIN_MODE_OUTPUT);
+    while (1)
+    {
+        rt_pin_write(LED0_PIN, PIN_HIGH);
+        rt_pin_write(LED1_PIN, PIN_HIGH);
+        rt_pin_write(LED2_PIN, PIN_HIGH);
+        rt_thread_mdelay(500);
+        rt_pin_write(LED0_PIN, PIN_LOW);
+        rt_pin_write(LED1_PIN, PIN_LOW);
+        rt_pin_write(LED2_PIN, PIN_LOW);
+        rt_thread_mdelay(500);
+    }
+
+    return RT_EOK;
+}

bsp/stm32/stm32f407-micu/board/CubeMX_Config/CubeMX_Config.ioc

@@ -0,0 +1,127 @@
+#MicroXplorer Configuration settings - do not modify
+CAD.formats=
+CAD.pinconfig=
+CAD.provider=
+File.Version=6
+GPIO.groupedBy=Group By Peripherals
+KeepUserPlacement=false
+Mcu.CPN=STM32F407VET6
+Mcu.Family=STM32F4
+Mcu.IP0=NVIC
+Mcu.IP1=RCC
+Mcu.IP2=SYS
+Mcu.IP3=USART1
+Mcu.IPNb=4
+Mcu.Name=STM32F407V(E-G)Tx
+Mcu.Package=LQFP100
+Mcu.Pin0=PC14-OSC32_IN
+Mcu.Pin1=PC15-OSC32_OUT
+Mcu.Pin2=PH0-OSC_IN
+Mcu.Pin3=PH1-OSC_OUT
+Mcu.Pin4=PA9
+Mcu.Pin5=PA10
+Mcu.Pin6=PA13
+Mcu.Pin7=PA14
+Mcu.Pin8=VP_SYS_VS_Systick
+Mcu.PinsNb=9
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32F407VETx
+MxCube.Version=6.15.0
+MxDb.Version=DB.6.0.150
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+PA10.Mode=Asynchronous
+PA10.Signal=USART1_RX
+PA13.Mode=Serial_Wire
+PA13.Signal=SYS_JTMS-SWDIO
+PA14.Mode=Serial_Wire
+PA14.Signal=SYS_JTCK-SWCLK
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PC14-OSC32_IN.Mode=LSE-External-Oscillator
+PC14-OSC32_IN.Signal=RCC_OSC32_IN
+PC15-OSC32_OUT.Mode=LSE-External-Oscillator
+PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
+PH0-OSC_IN.Mode=HSE-External-Oscillator
+PH0-OSC_IN.Signal=RCC_OSC_IN
+PH1-OSC_OUT.Mode=HSE-External-Oscillator
+PH1-OSC_OUT.Signal=RCC_OSC_OUT
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerLinker=GCC
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32F407VETx
+ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.28.3
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=0
+ProjectManager.MainLocation=Core/Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=CubeMX_Config.ioc
+ProjectManager.ProjectName=CubeMX_Config
+ProjectManager.ProjectStructure=
+ProjectManager.RegisterCallBack=
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=MDK-ARM V5.32
+ProjectManager.ToolChainLocation=
+ProjectManager.UAScriptAfterPath=
+ProjectManager.UAScriptBeforePath=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_USART1_UART_Init-USART1-false-HAL-true
+RCC.48MHZClocksFreq_Value=84000000
+RCC.AHBFreq_Value=168000000
+RCC.APB1CLKDivider=RCC_HCLK_DIV4
+RCC.APB1Freq_Value=42000000
+RCC.APB1TimFreq_Value=84000000
+RCC.APB2CLKDivider=RCC_HCLK_DIV2
+RCC.APB2Freq_Value=84000000
+RCC.APB2TimFreq_Value=168000000
+RCC.CortexFreq_Value=168000000
+RCC.EthernetFreq_Value=168000000
+RCC.FCLKCortexFreq_Value=168000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=168000000
+RCC.HSE_VALUE=8000000
+RCC.HSI_VALUE=16000000
+RCC.I2SClocksFreq_Value=192000000
+RCC.IPParameters=48MHZClocksFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLM,PLLN,PLLQCLKFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VcooutputI2S
+RCC.LSI_VALUE=32000
+RCC.MCO2PinFreq_Value=168000000
+RCC.PLLCLKFreq_Value=168000000
+RCC.PLLM=8
+RCC.PLLN=168
+RCC.PLLQCLKFreq_Value=84000000
+RCC.RTCFreq_Value=32000
+RCC.RTCHSEDivFreq_Value=4000000
+RCC.SYSCLKFreq_VALUE=168000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.VCOI2SOutputFreq_Value=384000000
+RCC.VCOInputFreq_Value=2000000
+RCC.VCOOutputFreq_Value=336000000
+RCC.VcooutputI2S=192000000
+USART1.IPParameters=VirtualMode
+USART1.VirtualMode=VM_ASYNC
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+board=custom

bsp/stm32/stm32f407-micu/board/CubeMX_Config/Inc/main.h

@@ -0,0 +1,69 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */

bsp/stm32/stm32f407-micu/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h

@@ -0,0 +1,495 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_conf_template.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f4xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+
+/* #define HAL_CRYP_MODULE_ENABLED */
+/* #define HAL_ADC_MODULE_ENABLED */
+/* #define HAL_CAN_MODULE_ENABLED */
+/* #define HAL_CRC_MODULE_ENABLED */
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
+/* #define HAL_DAC_MODULE_ENABLED */
+/* #define HAL_DCMI_MODULE_ENABLED */
+/* #define HAL_DMA2D_MODULE_ENABLED */
+/* #define HAL_ETH_MODULE_ENABLED */
+/* #define HAL_ETH_LEGACY_MODULE_ENABLED */
+/* #define HAL_NAND_MODULE_ENABLED */
+/* #define HAL_NOR_MODULE_ENABLED */
+/* #define HAL_PCCARD_MODULE_ENABLED */
+/* #define HAL_SRAM_MODULE_ENABLED */
+/* #define HAL_SDRAM_MODULE_ENABLED */
+/* #define HAL_HASH_MODULE_ENABLED */
+/* #define HAL_I2C_MODULE_ENABLED */
+/* #define HAL_I2S_MODULE_ENABLED */
+/* #define HAL_IWDG_MODULE_ENABLED */
+/* #define HAL_LTDC_MODULE_ENABLED */
+/* #define HAL_RNG_MODULE_ENABLED */
+/* #define HAL_RTC_MODULE_ENABLED */
+/* #define HAL_SAI_MODULE_ENABLED */
+/* #define HAL_SD_MODULE_ENABLED */
+/* #define HAL_MMC_MODULE_ENABLED */
+/* #define HAL_SPI_MODULE_ENABLED */
+/* #define HAL_TIM_MODULE_ENABLED */
+#define HAL_UART_MODULE_ENABLED
+/* #define HAL_USART_MODULE_ENABLED */
+/* #define HAL_IRDA_MODULE_ENABLED */
+/* #define HAL_SMARTCARD_MODULE_ENABLED */
+/* #define HAL_SMBUS_MODULE_ENABLED */
+/* #define HAL_WWDG_MODULE_ENABLED */
+/* #define HAL_PCD_MODULE_ENABLED */
+/* #define HAL_HCD_MODULE_ENABLED */
+/* #define HAL_DSI_MODULE_ENABLED */
+/* #define HAL_QSPI_MODULE_ENABLED */
+/* #define HAL_QSPI_MODULE_ENABLED */
+/* #define HAL_CEC_MODULE_ENABLED */
+/* #define HAL_FMPI2C_MODULE_ENABLED */
+/* #define HAL_FMPSMBUS_MODULE_ENABLED */
+/* #define HAL_SPDIFRX_MODULE_ENABLED */
+/* #define HAL_DFSDM_MODULE_ENABLED */
+/* #define HAL_LPTIM_MODULE_ENABLED */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+#define HSE_VALUE    8000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+#define LSI_VALUE  32000U       /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+The real value may vary depending on the variations
+in voltage and temperature.*/
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+#define LSE_VALUE  32768U    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT    5000U   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+#define EXTERNAL_CLOCK_VALUE    12288000U /*!< Value of the External audio frequency in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE            3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            15U   /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+#define  DATA_CACHE_ENABLE            1U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
+#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
+#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
+#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
+#define  USE_HAL_FMPSMBUS_REGISTER_CALLBACKS    0U /* FMPSMBUS register callback disabled  */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
+#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    4U       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848_PHY_ADDRESS Address*/
+#define DP83848_PHY_ADDRESS
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000U)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001U)    /*!< Transceiver Basic Status Register    */
+
+#define PHY_RESET                       ((uint16_t)0x8000U)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000U)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100U)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000U)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100U)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000U)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000U)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200U)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800U)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400U)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020U)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004U)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002U)  /*!< Jabber condition detected            */
+
+/* Section 4: Extended PHY Registers */
+#define PHY_SR                          ((uint16_t))    /*!< PHY status register Offset                      */
+
+#define PHY_SPEED_STATUS                ((uint16_t))  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t))  /*!< PHY Duplex mask                                 */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+#include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+#include "stm32f4xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+#include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+#include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+#include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+#include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_ETH_LEGACY_MODULE_ENABLED
+#include "stm32f4xx_hal_eth_legacy.h"
+#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+#include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+#include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+#include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+#include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+#include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+#include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+#include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+#include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+#include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+#include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+#include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+#include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+#include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+#include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+#include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+#include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_FMPSMBUS_MODULE_ENABLED
+#include "stm32f4xx_hal_fmpsmbus.h"
+#endif /* HAL_FMPSMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+#include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+#include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+#include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t* file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */

bsp/stm32/stm32f407-micu/board/CubeMX_Config/Inc/stm32f4xx_it.h

@@ -0,0 +1,66 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_IT_H
+#define __STM32F4xx_IT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_IT_H */

bsp/stm32/stm32f407-micu/board/CubeMX_Config/Src/main.c

@@ -0,0 +1,240 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+UART_HandleTypeDef huart1;
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_USART1_UART_Init(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+
+    /* USER CODE BEGIN 1 */
+
+    /* USER CODE END 1 */
+
+    /* MCU Configuration--------------------------------------------------------*/
+
+    /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+    HAL_Init();
+
+    /* USER CODE BEGIN Init */
+
+    /* USER CODE END Init */
+
+    /* Configure the system clock */
+    SystemClock_Config();
+
+    /* USER CODE BEGIN SysInit */
+
+    /* USER CODE END SysInit */
+
+    /* Initialize all configured peripherals */
+    MX_GPIO_Init();
+    MX_USART1_UART_Init();
+    /* USER CODE BEGIN 2 */
+
+    /* USER CODE END 2 */
+
+    /* Infinite loop */
+    /* USER CODE BEGIN WHILE */
+    while (1)
+    {
+        /* USER CODE END WHILE */
+
+        /* USER CODE BEGIN 3 */
+    }
+    /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+    RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+    RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+    /** Configure the main internal regulator output voltage
+    */
+    __HAL_RCC_PWR_CLK_ENABLE();
+    __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+    /** Initializes the RCC Oscillators according to the specified parameters
+    * in the RCC_OscInitTypeDef structure.
+    */
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+    RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+    RCC_OscInitStruct.PLL.PLLM = 8;
+    RCC_OscInitStruct.PLL.PLLN = 168;
+    RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+    RCC_OscInitStruct.PLL.PLLQ = 4;
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+    {
+        Error_Handler();
+    }
+
+    /** Initializes the CPU, AHB and APB buses clocks
+    */
+    RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+                                  | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+    RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+    RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+
+    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
+    {
+        Error_Handler();
+    }
+}
+
+/**
+  * @brief USART1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_USART1_UART_Init(void)
+{
+
+    /* USER CODE BEGIN USART1_Init 0 */
+
+    /* USER CODE END USART1_Init 0 */
+
+    /* USER CODE BEGIN USART1_Init 1 */
+
+    /* USER CODE END USART1_Init 1 */
+    huart1.Instance = USART1;
+    huart1.Init.BaudRate = 115200;
+    huart1.Init.WordLength = UART_WORDLENGTH_8B;
+    huart1.Init.StopBits = UART_STOPBITS_1;
+    huart1.Init.Parity = UART_PARITY_NONE;
+    huart1.Init.Mode = UART_MODE_TX_RX;
+    huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+    huart1.Init.OverSampling = UART_OVERSAMPLING_16;
+    if (HAL_UART_Init(&huart1) != HAL_OK)
+    {
+        Error_Handler();
+    }
+    /* USER CODE BEGIN USART1_Init 2 */
+
+    /* USER CODE END USART1_Init 2 */
+
+}
+
+/**
+  * @brief GPIO Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_GPIO_Init(void)
+{
+    /* USER CODE BEGIN MX_GPIO_Init_1 */
+
+    /* USER CODE END MX_GPIO_Init_1 */
+
+    /* GPIO Ports Clock Enable */
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    __HAL_RCC_GPIOH_CLK_ENABLE();
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+
+    /* USER CODE BEGIN MX_GPIO_Init_2 */
+
+    /* USER CODE END MX_GPIO_Init_2 */
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+    /* USER CODE BEGIN Error_Handler_Debug */
+    /* User can add his own implementation to report the HAL error return state */
+    __disable_irq();
+    while (1)
+    {
+    }
+    /* USER CODE END Error_Handler_Debug */
+}
+#ifdef USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{
+    /* USER CODE BEGIN 6 */
+    /* User can add his own implementation to report the file name and line number,
+       ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+    /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */

bsp/stm32/stm32f407-micu/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c

@@ -0,0 +1,148 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file         stm32f4xx_hal_msp.c
+  * @brief        This file provides code for the MSP Initialization
+  *               and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+#include <drv_common.h>
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+
+    /* USER CODE BEGIN MspInit 0 */
+
+    /* USER CODE END MspInit 0 */
+
+    __HAL_RCC_SYSCFG_CLK_ENABLE();
+    __HAL_RCC_PWR_CLK_ENABLE();
+
+    /* System interrupt init*/
+
+    /* USER CODE BEGIN MspInit 1 */
+
+    /* USER CODE END MspInit 1 */
+}
+
+/**
+  * @brief UART MSP Initialization
+  * This function configures the hardware resources used in this example
+  * @param huart: UART handle pointer
+  * @retval None
+  */
+void HAL_UART_MspInit(UART_HandleTypeDef* huart)
+{
+    GPIO_InitTypeDef GPIO_InitStruct = {0};
+    if (huart->Instance == USART1)
+    {
+        /* USER CODE BEGIN USART1_MspInit 0 */
+
+        /* USER CODE END USART1_MspInit 0 */
+        /* Peripheral clock enable */
+        __HAL_RCC_USART1_CLK_ENABLE();
+
+        __HAL_RCC_GPIOA_CLK_ENABLE();
+        /**USART1 GPIO Configuration
+        PA9     ------> USART1_TX
+        PA10     ------> USART1_RX
+        */
+        GPIO_InitStruct.Pin = GPIO_PIN_9 | GPIO_PIN_10;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_NOPULL;
+        GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
+        HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+        /* USER CODE BEGIN USART1_MspInit 1 */
+
+        /* USER CODE END USART1_MspInit 1 */
+
+    }
+
+}
+
+/**
+  * @brief UART MSP De-Initialization
+  * This function freeze the hardware resources used in this example
+  * @param huart: UART handle pointer
+  * @retval None
+  */
+void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
+{
+    if (huart->Instance == USART1)
+    {
+        /* USER CODE BEGIN USART1_MspDeInit 0 */
+
+        /* USER CODE END USART1_MspDeInit 0 */
+        /* Peripheral clock disable */
+        __HAL_RCC_USART1_CLK_DISABLE();
+
+        /**USART1 GPIO Configuration
+        PA9     ------> USART1_TX
+        PA10     ------> USART1_RX
+        */
+        HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9 | GPIO_PIN_10);
+
+        /* USER CODE BEGIN USART1_MspDeInit 1 */
+
+        /* USER CODE END USART1_MspDeInit 1 */
+    }
+
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

bsp/stm32/stm32f407-micu/board/CubeMX_Config/Src/stm32f4xx_it.c

@@ -0,0 +1,203 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f4xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M4 Processor Interruption and Exception Handlers          */
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+    /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+    /* USER CODE END NonMaskableInt_IRQn 0 */
+    /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+    while (1)
+    {
+    }
+    /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+    /* USER CODE BEGIN HardFault_IRQn 0 */
+
+    /* USER CODE END HardFault_IRQn 0 */
+    while (1)
+    {
+        /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+        /* USER CODE END W1_HardFault_IRQn 0 */
+    }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+    /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+    /* USER CODE END MemoryManagement_IRQn 0 */
+    while (1)
+    {
+        /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+        /* USER CODE END W1_MemoryManagement_IRQn 0 */
+    }
+}
+
+/**
+  * @brief This function handles Pre-fetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+    /* USER CODE BEGIN BusFault_IRQn 0 */
+
+    /* USER CODE END BusFault_IRQn 0 */
+    while (1)
+    {
+        /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+        /* USER CODE END W1_BusFault_IRQn 0 */
+    }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+    /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+    /* USER CODE END UsageFault_IRQn 0 */
+    while (1)
+    {
+        /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+        /* USER CODE END W1_UsageFault_IRQn 0 */
+    }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+    /* USER CODE BEGIN SVCall_IRQn 0 */
+
+    /* USER CODE END SVCall_IRQn 0 */
+    /* USER CODE BEGIN SVCall_IRQn 1 */
+
+    /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+    /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+    /* USER CODE END DebugMonitor_IRQn 0 */
+    /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+    /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+    /* USER CODE BEGIN PendSV_IRQn 0 */
+
+    /* USER CODE END PendSV_IRQn 0 */
+    /* USER CODE BEGIN PendSV_IRQn 1 */
+
+    /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+    /* USER CODE BEGIN SysTick_IRQn 0 */
+
+    /* USER CODE END SysTick_IRQn 0 */
+    HAL_IncTick();
+    /* USER CODE BEGIN SysTick_IRQn 1 */
+
+    /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F4xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32f4xx.s).                    */
+/******************************************************************************/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

bsp/stm32/stm32f407-micu/board/CubeMX_Config/Src/system_stm32f4xx.c

@@ -0,0 +1,747 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f4xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f4xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick
+  *                                  timer or configure other parameters.
+  *
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f4xx_system
+  * @{
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Includes
+  * @{
+  */
+
+
+#include "stm32f4xx.h"
+
+#if !defined  (HSE_VALUE)
+    #define HSE_VALUE    ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+    #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+    || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+    || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+    /* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
+STM32F412Zx || STM32F412Vx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+    || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+    /* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+STM32F479xx */
+
+/* Note: Following vector table addresses must be defined in line with linker
+         configuration. */
+/*!< Uncomment the following line if you need to relocate the vector table
+     anywhere in Flash or Sram, else the vector table is kept at the automatic
+     remap of boot address selected */
+/* #define USER_VECT_TAB_ADDRESS */
+
+#if defined(USER_VECT_TAB_ADDRESS)
+    /*!< Uncomment the following line if you need to relocate your vector Table
+    in Sram else user remap will be done in Flash. */
+    /* #define VECT_TAB_SRAM */
+    #if defined(VECT_TAB_SRAM)
+        #define VECT_TAB_BASE_ADDRESS   SRAM_BASE       /*!< Vector Table base address field.
+        This value must be a multiple of 0x200. */
+    #else
+        #define VECT_TAB_BASE_ADDRESS   FLASH_BASE      /*!< Vector Table base address field.
+        This value must be a multiple of 0x200. */
+    #endif /* VECT_TAB_SRAM */
+    #if !defined(VECT_TAB_OFFSET)
+        #define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table offset field.
+        This value must be a multiple of 0x200. */
+    #endif /* VECT_TAB_OFFSET */
+#endif /* USER_VECT_TAB_ADDRESS */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+  * @{
+  */
+/* This variable is updated in three ways:
+    1) by calling CMSIS function SystemCoreClockUpdate()
+    2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+    3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+       Note: If you use this function to configure the system clock; then there
+             is no need to call the 2 first functions listed above, since SystemCoreClock
+             variable is updated automatically.
+*/
+uint32_t SystemCoreClock = 16000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8]  = {0, 0, 0, 0, 1, 2, 3, 4};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+    static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting, vector table location and External memory
+  *         configuration.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+    /* FPU settings ------------------------------------------------------------*/
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2)); /* set CP10 and CP11 Full Access */
+#endif
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+    SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+    /* Configure the Vector Table location -------------------------------------*/
+#if defined(USER_VECT_TAB_ADDRESS)
+    SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.
+  *
+  * @note   - The system frequency computed by this function is not the real
+  *           frequency in the chip. It is calculated based on the predefined
+  *           constant and the selected clock source:
+  *
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *
+  *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.
+  *
+  *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+  *              depends on the application requirements), user has to ensure that HSE_VALUE
+  *              is same as the real frequency of the crystal used. Otherwise, this function
+  *              may have wrong result.
+  *
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate(void)
+{
+    uint32_t tmp, pllvco, pllp, pllsource, pllm;
+
+    /* Get SYSCLK source -------------------------------------------------------*/
+    tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+    switch (tmp)
+    {
+    case 0x00:  /* HSI used as system clock source */
+        SystemCoreClock = HSI_VALUE;
+        break;
+    case 0x04:  /* HSE used as system clock source */
+        SystemCoreClock = HSE_VALUE;
+        break;
+    case 0x08:  /* PLL used as system clock source */
+
+        /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+           SYSCLK = PLL_VCO / PLL_P
+           */
+        pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+        pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+        if (pllsource != 0)
+        {
+            /* HSE used as PLL clock source */
+            pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+        }
+        else
+        {
+            /* HSI used as PLL clock source */
+            pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+        }
+
+        pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> 16) + 1) * 2;
+        SystemCoreClock = pllvco / pllp;
+        break;
+    default:
+        SystemCoreClock = HSI_VALUE;
+        break;
+    }
+    /* Compute HCLK frequency --------------------------------------------------*/
+    /* Get HCLK prescaler */
+    tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+    /* HCLK frequency */
+    SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+    __IO uint32_t tmp = 0x00;
+
+    register uint32_t tmpreg = 0, timeout = 0xFFFF;
+    register __IO uint32_t index;
+
+    /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
+    RCC->AHB1ENR |= 0x000001F8;
+
+    /* Delay after an RCC peripheral clock enabling */
+    tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+    /* Connect PDx pins to FMC Alternate function */
+    GPIOD->AFR[0]  = 0x00CCC0CC;
+    GPIOD->AFR[1]  = 0xCCCCCCCC;
+    /* Configure PDx pins in Alternate function mode */
+    GPIOD->MODER   = 0xAAAA0A8A;
+    /* Configure PDx pins speed to 100 MHz */
+    GPIOD->OSPEEDR = 0xFFFF0FCF;
+    /* Configure PDx pins Output type to push-pull */
+    GPIOD->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PDx pins */
+    GPIOD->PUPDR   = 0x00000000;
+
+    /* Connect PEx pins to FMC Alternate function */
+    GPIOE->AFR[0]  = 0xC00CC0CC;
+    GPIOE->AFR[1]  = 0xCCCCCCCC;
+    /* Configure PEx pins in Alternate function mode */
+    GPIOE->MODER   = 0xAAAA828A;
+    /* Configure PEx pins speed to 100 MHz */
+    GPIOE->OSPEEDR = 0xFFFFC3CF;
+    /* Configure PEx pins Output type to push-pull */
+    GPIOE->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PEx pins */
+    GPIOE->PUPDR   = 0x00000000;
+
+    /* Connect PFx pins to FMC Alternate function */
+    GPIOF->AFR[0]  = 0xCCCCCCCC;
+    GPIOF->AFR[1]  = 0xCCCCCCCC;
+    /* Configure PFx pins in Alternate function mode */
+    GPIOF->MODER   = 0xAA800AAA;
+    /* Configure PFx pins speed to 50 MHz */
+    GPIOF->OSPEEDR = 0xAA800AAA;
+    /* Configure PFx pins Output type to push-pull */
+    GPIOF->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PFx pins */
+    GPIOF->PUPDR   = 0x00000000;
+
+    /* Connect PGx pins to FMC Alternate function */
+    GPIOG->AFR[0]  = 0xCCCCCCCC;
+    GPIOG->AFR[1]  = 0xCCCCCCCC;
+    /* Configure PGx pins in Alternate function mode */
+    GPIOG->MODER   = 0xAAAAAAAA;
+    /* Configure PGx pins speed to 50 MHz */
+    GPIOG->OSPEEDR = 0xAAAAAAAA;
+    /* Configure PGx pins Output type to push-pull */
+    GPIOG->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PGx pins */
+    GPIOG->PUPDR   = 0x00000000;
+
+    /* Connect PHx pins to FMC Alternate function */
+    GPIOH->AFR[0]  = 0x00C0CC00;
+    GPIOH->AFR[1]  = 0xCCCCCCCC;
+    /* Configure PHx pins in Alternate function mode */
+    GPIOH->MODER   = 0xAAAA08A0;
+    /* Configure PHx pins speed to 50 MHz */
+    GPIOH->OSPEEDR = 0xAAAA08A0;
+    /* Configure PHx pins Output type to push-pull */
+    GPIOH->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PHx pins */
+    GPIOH->PUPDR   = 0x00000000;
+
+    /* Connect PIx pins to FMC Alternate function */
+    GPIOI->AFR[0]  = 0xCCCCCCCC;
+    GPIOI->AFR[1]  = 0x00000CC0;
+    /* Configure PIx pins in Alternate function mode */
+    GPIOI->MODER   = 0x0028AAAA;
+    /* Configure PIx pins speed to 50 MHz */
+    GPIOI->OSPEEDR = 0x0028AAAA;
+    /* Configure PIx pins Output type to push-pull */
+    GPIOI->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PIx pins */
+    GPIOI->PUPDR   = 0x00000000;
+
+    /*-- FMC Configuration -------------------------------------------------------*/
+    /* Enable the FMC interface clock */
+    RCC->AHB3ENR |= 0x00000001;
+    /* Delay after an RCC peripheral clock enabling */
+    tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+    FMC_Bank5_6->SDCR[0] = 0x000019E4;
+    FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+    /* SDRAM initialization sequence */
+    /* Clock enable command */
+    FMC_Bank5_6->SDCMR = 0x00000011;
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    while ((tmpreg != 0) && (timeout-- > 0))
+    {
+        tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    }
+
+    /* Delay */
+    for (index = 0; index < 1000; index++);
+
+    /* PALL command */
+    FMC_Bank5_6->SDCMR = 0x00000012;
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    timeout = 0xFFFF;
+    while ((tmpreg != 0) && (timeout-- > 0))
+    {
+        tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    }
+
+    /* Auto refresh command */
+    FMC_Bank5_6->SDCMR = 0x00000073;
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    timeout = 0xFFFF;
+    while ((tmpreg != 0) && (timeout-- > 0))
+    {
+        tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    }
+
+    /* MRD register program */
+    FMC_Bank5_6->SDCMR = 0x00046014;
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    timeout = 0xFFFF;
+    while ((tmpreg != 0) && (timeout-- > 0))
+    {
+        tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    }
+
+    /* Set refresh count */
+    tmpreg = FMC_Bank5_6->SDRTR;
+    FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C << 1));
+
+    /* Disable write protection */
+    tmpreg = FMC_Bank5_6->SDCR[0];
+    FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+    /* Configure and enable Bank1_SRAM2 */
+    FMC_Bank1->BTCR[2]  = 0x00001011;
+    FMC_Bank1->BTCR[3]  = 0x00000201;
+    FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+    /* Configure and enable Bank1_SRAM2 */
+    FMC_Bank1->BTCR[2]  = 0x00001091;
+    FMC_Bank1->BTCR[3]  = 0x00110212;
+    FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+
+    (void)(tmp);
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+    __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#if defined (DATA_IN_ExtSDRAM)
+    register uint32_t tmpreg = 0, timeout = 0xFFFF;
+    register __IO uint32_t index;
+
+#if defined(STM32F446xx)
+    /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+        clock */
+    RCC->AHB1ENR |= 0x0000007D;
+#else
+    /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
+        clock */
+    RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */
+    /* Delay after an RCC peripheral clock enabling */
+    tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+#if defined(STM32F446xx)
+    /* Connect PAx pins to FMC Alternate function */
+    GPIOA->AFR[0]  |= 0xC0000000;
+    GPIOA->AFR[1]  |= 0x00000000;
+    /* Configure PDx pins in Alternate function mode */
+    GPIOA->MODER   |= 0x00008000;
+    /* Configure PDx pins speed to 50 MHz */
+    GPIOA->OSPEEDR |= 0x00008000;
+    /* Configure PDx pins Output type to push-pull */
+    GPIOA->OTYPER  |= 0x00000000;
+    /* No pull-up, pull-down for PDx pins */
+    GPIOA->PUPDR   |= 0x00000000;
+
+    /* Connect PCx pins to FMC Alternate function */
+    GPIOC->AFR[0]  |= 0x00CC0000;
+    GPIOC->AFR[1]  |= 0x00000000;
+    /* Configure PDx pins in Alternate function mode */
+    GPIOC->MODER   |= 0x00000A00;
+    /* Configure PDx pins speed to 50 MHz */
+    GPIOC->OSPEEDR |= 0x00000A00;
+    /* Configure PDx pins Output type to push-pull */
+    GPIOC->OTYPER  |= 0x00000000;
+    /* No pull-up, pull-down for PDx pins */
+    GPIOC->PUPDR   |= 0x00000000;
+#endif /* STM32F446xx */
+
+    /* Connect PDx pins to FMC Alternate function */
+    GPIOD->AFR[0]  = 0x000000CC;
+    GPIOD->AFR[1]  = 0xCC000CCC;
+    /* Configure PDx pins in Alternate function mode */
+    GPIOD->MODER   = 0xA02A000A;
+    /* Configure PDx pins speed to 50 MHz */
+    GPIOD->OSPEEDR = 0xA02A000A;
+    /* Configure PDx pins Output type to push-pull */
+    GPIOD->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PDx pins */
+    GPIOD->PUPDR   = 0x00000000;
+
+    /* Connect PEx pins to FMC Alternate function */
+    GPIOE->AFR[0]  = 0xC00000CC;
+    GPIOE->AFR[1]  = 0xCCCCCCCC;
+    /* Configure PEx pins in Alternate function mode */
+    GPIOE->MODER   = 0xAAAA800A;
+    /* Configure PEx pins speed to 50 MHz */
+    GPIOE->OSPEEDR = 0xAAAA800A;
+    /* Configure PEx pins Output type to push-pull */
+    GPIOE->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PEx pins */
+    GPIOE->PUPDR   = 0x00000000;
+
+    /* Connect PFx pins to FMC Alternate function */
+    GPIOF->AFR[0]  = 0xCCCCCCCC;
+    GPIOF->AFR[1]  = 0xCCCCCCCC;
+    /* Configure PFx pins in Alternate function mode */
+    GPIOF->MODER   = 0xAA800AAA;
+    /* Configure PFx pins speed to 50 MHz */
+    GPIOF->OSPEEDR = 0xAA800AAA;
+    /* Configure PFx pins Output type to push-pull */
+    GPIOF->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PFx pins */
+    GPIOF->PUPDR   = 0x00000000;
+
+    /* Connect PGx pins to FMC Alternate function */
+    GPIOG->AFR[0]  = 0xCCCCCCCC;
+    GPIOG->AFR[1]  = 0xCCCCCCCC;
+    /* Configure PGx pins in Alternate function mode */
+    GPIOG->MODER   = 0xAAAAAAAA;
+    /* Configure PGx pins speed to 50 MHz */
+    GPIOG->OSPEEDR = 0xAAAAAAAA;
+    /* Configure PGx pins Output type to push-pull */
+    GPIOG->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PGx pins */
+    GPIOG->PUPDR   = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+    /* Connect PHx pins to FMC Alternate function */
+    GPIOH->AFR[0]  = 0x00C0CC00;
+    GPIOH->AFR[1]  = 0xCCCCCCCC;
+    /* Configure PHx pins in Alternate function mode */
+    GPIOH->MODER   = 0xAAAA08A0;
+    /* Configure PHx pins speed to 50 MHz */
+    GPIOH->OSPEEDR = 0xAAAA08A0;
+    /* Configure PHx pins Output type to push-pull */
+    GPIOH->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PHx pins */
+    GPIOH->PUPDR   = 0x00000000;
+
+    /* Connect PIx pins to FMC Alternate function */
+    GPIOI->AFR[0]  = 0xCCCCCCCC;
+    GPIOI->AFR[1]  = 0x00000CC0;
+    /* Configure PIx pins in Alternate function mode */
+    GPIOI->MODER   = 0x0028AAAA;
+    /* Configure PIx pins speed to 50 MHz */
+    GPIOI->OSPEEDR = 0x0028AAAA;
+    /* Configure PIx pins Output type to push-pull */
+    GPIOI->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PIx pins */
+    GPIOI->PUPDR   = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+    /*-- FMC Configuration -------------------------------------------------------*/
+    /* Enable the FMC interface clock */
+    RCC->AHB3ENR |= 0x00000001;
+    /* Delay after an RCC peripheral clock enabling */
+    tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+    /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+    FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else
+    FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+    FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+    /* SDRAM initialization sequence */
+    /* Clock enable command */
+    FMC_Bank5_6->SDCMR = 0x00000011;
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    while ((tmpreg != 0) && (timeout-- > 0))
+    {
+        tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    }
+
+    /* Delay */
+    for (index = 0; index < 1000; index++);
+
+    /* PALL command */
+    FMC_Bank5_6->SDCMR = 0x00000012;
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    timeout = 0xFFFF;
+    while ((tmpreg != 0) && (timeout-- > 0))
+    {
+        tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    }
+
+    /* Auto refresh command */
+#if defined(STM32F446xx)
+    FMC_Bank5_6->SDCMR = 0x000000F3;
+#else
+    FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    timeout = 0xFFFF;
+    while ((tmpreg != 0) && (timeout-- > 0))
+    {
+        tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    }
+
+    /* MRD register program */
+#if defined(STM32F446xx)
+    FMC_Bank5_6->SDCMR = 0x00044014;
+#else
+    FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    timeout = 0xFFFF;
+    while ((tmpreg != 0) && (timeout-- > 0))
+    {
+        tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+    }
+
+    /* Set refresh count */
+    tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+    FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C << 1));
+#else
+    FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C << 1));
+#endif /* STM32F446xx */
+
+    /* Disable write protection */
+    tmpreg = FMC_Bank5_6->SDCR[0];
+    FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+
+#if defined(DATA_IN_ExtSRAM)
+    /*-- GPIOs Configuration -----------------------------------------------------*/
+    /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+    RCC->AHB1ENR   |= 0x00000078;
+    /* Delay after an RCC peripheral clock enabling */
+    tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+
+    /* Connect PDx pins to FMC Alternate function */
+    GPIOD->AFR[0]  = 0x00CCC0CC;
+    GPIOD->AFR[1]  = 0xCCCCCCCC;
+    /* Configure PDx pins in Alternate function mode */
+    GPIOD->MODER   = 0xAAAA0A8A;
+    /* Configure PDx pins speed to 100 MHz */
+    GPIOD->OSPEEDR = 0xFFFF0FCF;
+    /* Configure PDx pins Output type to push-pull */
+    GPIOD->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PDx pins */
+    GPIOD->PUPDR   = 0x00000000;
+
+    /* Connect PEx pins to FMC Alternate function */
+    GPIOE->AFR[0]  = 0xC00CC0CC;
+    GPIOE->AFR[1]  = 0xCCCCCCCC;
+    /* Configure PEx pins in Alternate function mode */
+    GPIOE->MODER   = 0xAAAA828A;
+    /* Configure PEx pins speed to 100 MHz */
+    GPIOE->OSPEEDR = 0xFFFFC3CF;
+    /* Configure PEx pins Output type to push-pull */
+    GPIOE->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PEx pins */
+    GPIOE->PUPDR   = 0x00000000;
+
+    /* Connect PFx pins to FMC Alternate function */
+    GPIOF->AFR[0]  = 0x00CCCCCC;
+    GPIOF->AFR[1]  = 0xCCCC0000;
+    /* Configure PFx pins in Alternate function mode */
+    GPIOF->MODER   = 0xAA000AAA;
+    /* Configure PFx pins speed to 100 MHz */
+    GPIOF->OSPEEDR = 0xFF000FFF;
+    /* Configure PFx pins Output type to push-pull */
+    GPIOF->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PFx pins */
+    GPIOF->PUPDR   = 0x00000000;
+
+    /* Connect PGx pins to FMC Alternate function */
+    GPIOG->AFR[0]  = 0x00CCCCCC;
+    GPIOG->AFR[1]  = 0x000000C0;
+    /* Configure PGx pins in Alternate function mode */
+    GPIOG->MODER   = 0x00085AAA;
+    /* Configure PGx pins speed to 100 MHz */
+    GPIOG->OSPEEDR = 0x000CAFFF;
+    /* Configure PGx pins Output type to push-pull */
+    GPIOG->OTYPER  = 0x00000000;
+    /* No pull-up, pull-down for PGx pins */
+    GPIOG->PUPDR   = 0x00000000;
+
+    /*-- FMC/FSMC Configuration --------------------------------------------------*/
+    /* Enable the FMC/FSMC interface clock */
+    RCC->AHB3ENR         |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+    /* Delay after an RCC peripheral clock enabling */
+    tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+    /* Configure and enable Bank1_SRAM2 */
+    FMC_Bank1->BTCR[2]  = 0x00001011;
+    FMC_Bank1->BTCR[3]  = 0x00000201;
+    FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+    /* Delay after an RCC peripheral clock enabling */
+    tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+    /* Configure and enable Bank1_SRAM2 */
+    FMC_Bank1->BTCR[2]  = 0x00001091;
+    FMC_Bank1->BTCR[3]  = 0x00110212;
+    FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
+   || defined(STM32F412Zx) || defined(STM32F412Vx)
+    /* Delay after an RCC peripheral clock enabling */
+    tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+    /* Configure and enable Bank1_SRAM2 */
+    FSMC_Bank1->BTCR[2]  = 0x00001011;
+    FSMC_Bank1->BTCR[3]  = 0x00000201;
+    FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+          STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx  */
+    (void)(tmp);
+}
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

bsp/stm32/stm32f407-micu/board/Kconfig

@@ -0,0 +1,49 @@
+menu "Hardware Drivers Config"
+
+config SOC_STM32F407VE
+    bool
+    select SOC_SERIES_STM32F4
+    select RT_USING_COMPONENTS_INIT
+    select RT_USING_USER_MAIN
+    default y
+
+menu "Onboard Peripheral Drivers"
+
+endmenu
+
+menu "On-chip Peripheral Drivers"
+
+    config BSP_USING_GPIO
+        bool "Enable GPIO"
+        select RT_USING_PIN
+        default y
+
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
+        default y
+        select RT_USING_SERIAL
+        if BSP_USING_UART
+            config BSP_STM32_UART_V1_TX_TIMEOUT
+                int "UART TX timeout"
+                default 2000
+                depends on RT_USING_SERIAL_V1
+                
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default y
+
+            config BSP_UART1_RX_USING_DMA
+                bool "Enable UART1 RX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+        endif
+
+    source "$(BSP_DIR)/../libraries/HAL_Drivers/drivers/Kconfig"
+
+endmenu
+
+menu "Board extended module Drivers"
+
+endmenu
+
+endmenu

bsp/stm32/stm32f407-micu/board/SConscript

@@ -0,0 +1,25 @@
+import os
+from building import *
+
+cwd = GetCurrentDir()
+
+# add general drivers
+src = Split('''
+board.c
+CubeMX_Config/Src/stm32f4xx_hal_msp.c
+''')
+path =  [cwd]
+path += [os.path.join(cwd, 'CubeMX_Config', 'Inc')]
+
+CPPDEFINES = ['STM32F407xx']
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
+
+# if os.path.isfile(os.path.join(cwd, "ports", 'SConscript')):
+#     group = group + SConscript(os.path.join("ports", 'SConscript'))
+
+list = os.listdir(cwd)
+for item in list:
+    if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
+        group = group + SConscript(os.path.join(item, 'SConscript'))
+
+Return('group')

bsp/stm32/stm32f407-micu/board/board.c

@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ */
+
+#include "board.h"
+
+void SystemClock_Config(void)
+{
+    RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+    RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+    /** Configure the main internal regulator output voltage
+    */
+    __HAL_RCC_PWR_CLK_ENABLE();
+    __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+    /** Initializes the RCC Oscillators according to the specified parameters
+    * in the RCC_OscInitTypeDef structure.
+    */
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+    RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+    RCC_OscInitStruct.PLL.PLLM = 8;
+    RCC_OscInitStruct.PLL.PLLN = 168;
+    RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+    RCC_OscInitStruct.PLL.PLLQ = 4;
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+    {
+        Error_Handler();
+    }
+
+    /** Initializes the CPU, AHB and APB buses clocks
+    */
+    RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+                                  | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+    RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+    RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+
+    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
+    {
+        Error_Handler();
+    }
+}

bsp/stm32/stm32f407-micu/board/board.h

@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2006-2024, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2025-11-08      Dailingxiang   first version
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <rtthread.h>
+#include <stm32f4xx.h>
+#include "drv_common.h"
+#include "drv_gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define STM32_FLASH_START_ADDRESS     ((uint32_t)0x08000000)
+#define STM32_FLASH_SIZE             (512 * 1024)
+#define STM32_FLASH_END_ADDRESS      ((uint32_t)(STM32_FLASH_START_ADDRESS + STM32_FLASH_SIZE))
+
+#define STM32_SRAM_SIZE           128
+#define STM32_SRAM_END            (0x20000000 + STM32_SRAM_SIZE * 1024)
+
+#if defined(__ARMCC_VERSION)
+extern int Image$$RW_IRAM1$$ZI$$Limit;
+#define HEAP_BEGIN      (&Image$$RW_IRAM1$$ZI$$Limit)
+#elif __ICCARM__
+#pragma section="CSTACK"
+#define HEAP_BEGIN      (__segment_end("CSTACK"))
+#else
+extern int __bss_end;
+#define HEAP_BEGIN      (&__bss_end)
+#endif
+
+#define HEAP_END        STM32_SRAM_END
+
+void SystemClock_Config(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+

bsp/stm32/stm32f407-micu/board/linker_scripts/link.icf

@@ -0,0 +1,28 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__   = 0x0807FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__   = 0x2001FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x0400;
+define symbol __ICFEDIT_size_heap__   = 0x000;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite, last block CSTACK};

bsp/stm32/stm32f407-micu/board/linker_scripts/link.lds

@@ -0,0 +1,157 @@
+/*
+ * linker script for STM32F4xx with GNU ld
+ * bernard.xiong 2009-10-14
+ */
+
+/* Program Entry, set to mark it as "used" and avoid gc */
+MEMORY
+{
+    ROM (rx) : ORIGIN = 0x08000000, LENGTH = 512k /* 512KB flash */
+    RAM1(rw) : ORIGIN = 0x20000000, LENGTH =  128k /* 128K sram */
+}
+ENTRY(Reset_Handler)
+_system_stack_size = 0x400;
+
+SECTIONS
+{
+    .text :
+    {
+        . = ALIGN(4);
+        _stext = .;
+        KEEP(*(.isr_vector))            /* Startup code */
+
+        . = ALIGN(4);
+        *(.text)                        /* remaining code */
+        *(.text.*)                      /* remaining code */
+        *(.rodata)                      /* read-only data (constants) */
+        *(.rodata*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gnu.linkonce.t*)
+
+        /* section information for finsh shell */
+        . = ALIGN(4);
+        __fsymtab_start = .;
+        KEEP(*(FSymTab))
+        __fsymtab_end = .;
+
+        . = ALIGN(4);
+        __vsymtab_start = .;
+        KEEP(*(VSymTab))
+        __vsymtab_end = .;
+
+        /* section information for initial. */
+        . = ALIGN(4);
+        __rt_init_start = .;
+        KEEP(*(SORT(.rti_fn*)))
+        __rt_init_end = .;
+
+        . = ALIGN(4);
+
+        PROVIDE(__ctors_start__ = .);
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array))
+        PROVIDE(__ctors_end__ = .);
+
+        . = ALIGN(4);
+
+        _etext = .;
+    } > ROM = 0
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+
+        /* This is used by the startup in order to initialize the .data secion */
+        _sidata = .;
+    } > ROM
+    __exidx_end = .;
+
+    /* .data section which is used for initialized data */
+
+    .data : AT (_sidata)
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _sdata = . ;
+
+        *(.data)
+        *(.data.*)
+        *(.gnu.linkonce.d*)
+
+        PROVIDE(__dtors_start__ = .);
+        KEEP(*(SORT(.dtors.*)))
+        KEEP(*(.dtors))
+        PROVIDE(__dtors_end__ = .);
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _edata = . ;
+    } >RAM
+
+    .stack :
+    {
+        . = ALIGN(4);
+        _sstack = .;
+        . = . + _system_stack_size;
+        . = ALIGN(4);
+        _estack = .;
+    } >RAM
+
+    __bss_start = .;
+    .bss :
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _sbss = .;
+
+        *(.bss)
+        *(.bss.*)
+        *(COMMON)
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _ebss = . ;
+
+        *(.bss.init)
+    } > RAM
+    __bss_end = .;
+
+    _end = .;
+
+    /* Stabs debugging sections.  */
+    .stab          0 : { *(.stab) }
+    .stabstr       0 : { *(.stabstr) }
+    .stab.excl     0 : { *(.stab.excl) }
+    .stab.exclstr  0 : { *(.stab.exclstr) }
+    .stab.index    0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment       0 : { *(.comment) }
+    /* DWARF debug sections.
+     * Symbols in the DWARF debugging sections are relative to the beginning
+     * of the section so we begin them at 0.  */
+    /* DWARF 1 */
+    .debug          0 : { *(.debug) }
+    .line           0 : { *(.line) }
+    /* GNU DWARF 1 extensions */
+    .debug_srcinfo  0 : { *(.debug_srcinfo) }
+    .debug_sfnames  0 : { *(.debug_sfnames) }
+    /* DWARF 1.1 and DWARF 2 */
+    .debug_aranges  0 : { *(.debug_aranges) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    /* DWARF 2 */
+    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+    .debug_abbrev   0 : { *(.debug_abbrev) }
+    .debug_line     0 : { *(.debug_line) }
+    .debug_frame    0 : { *(.debug_frame) }
+    .debug_str      0 : { *(.debug_str) }
+    .debug_loc      0 : { *(.debug_loc) }
+    .debug_macinfo  0 : { *(.debug_macinfo) }
+    /* SGI/MIPS DWARF 2 extensions */
+    .debug_weaknames 0 : { *(.debug_weaknames) }
+    .debug_funcnames 0 : { *(.debug_funcnames) }
+    .debug_typenames 0 : { *(.debug_typenames) }
+    .debug_varnames  0 : { *(.debug_varnames) }
+}

bsp/stm32/stm32f407-micu/board/linker_scripts/link.sct

@@ -0,0 +1,15 @@
+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x00080000  {    ; load region size_region
+  ER_IROM1 0x08000000 0x00080000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM1 0x20000000 0x00020000  {  ; RW data
+   .ANY (+RW +ZI)
+  }
+}
+

bsp/stm32/stm32f407-micu/project.eww

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\project.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+

bsp/stm32/stm32f407-micu/rtconfig.h

@@ -0,0 +1,432 @@
+#ifndef RT_CONFIG_H__
+#define RT_CONFIG_H__
+
+/* RT-Thread Kernel */
+
+/* klibc options */
+
+/* rt_vsnprintf options */
+
+/* end of rt_vsnprintf options */
+
+/* rt_vsscanf options */
+
+/* end of rt_vsscanf options */
+
+/* rt_memset options */
+
+/* end of rt_memset options */
+
+/* rt_memcpy options */
+
+/* end of rt_memcpy options */
+
+/* rt_memmove options */
+
+/* end of rt_memmove options */
+
+/* rt_memcmp options */
+
+/* end of rt_memcmp options */
+
+/* rt_strstr options */
+
+/* end of rt_strstr options */
+
+/* rt_strcasecmp options */
+
+/* end of rt_strcasecmp options */
+
+/* rt_strncpy options */
+
+/* end of rt_strncpy options */
+
+/* rt_strcpy options */
+
+/* end of rt_strcpy options */
+
+/* rt_strncmp options */
+
+/* end of rt_strncmp options */
+
+/* rt_strcmp options */
+
+/* end of rt_strcmp options */
+
+/* rt_strlen options */
+
+/* end of rt_strlen options */
+
+/* rt_strnlen options */
+
+/* end of rt_strnlen options */
+/* end of klibc options */
+#define RT_NAME_MAX 8
+#define RT_CPUS_NR 1
+#define RT_ALIGN_SIZE 8
+#define RT_THREAD_PRIORITY_32
+#define RT_THREAD_PRIORITY_MAX 32
+#define RT_TICK_PER_SECOND 1000
+#define RT_USING_OVERFLOW_CHECK
+#define RT_USING_HOOK
+#define RT_HOOK_USING_FUNC_PTR
+#define RT_USING_IDLE_HOOK
+#define RT_IDLE_HOOK_LIST_SIZE 4
+#define IDLE_THREAD_STACK_SIZE 256
+
+/* kservice options */
+
+/* end of kservice options */
+#define RT_USING_DEBUG
+#define RT_DEBUGING_ASSERT
+#define RT_DEBUGING_COLOR
+#define RT_DEBUGING_CONTEXT
+
+/* Inter-Thread communication */
+
+#define RT_USING_SEMAPHORE
+#define RT_USING_MUTEX
+#define RT_USING_EVENT
+#define RT_USING_MAILBOX
+#define RT_USING_MESSAGEQUEUE
+/* end of Inter-Thread communication */
+
+/* Memory Management */
+
+#define RT_USING_MEMPOOL
+#define RT_USING_SMALL_MEM
+#define RT_USING_SMALL_MEM_AS_HEAP
+#define RT_USING_HEAP
+/* end of Memory Management */
+#define RT_USING_DEVICE
+#define RT_USING_CONSOLE
+#define RT_CONSOLEBUF_SIZE 128
+#define RT_CONSOLE_DEVICE_NAME "uart1"
+#define RT_VER_NUM 0x50201
+#define RT_BACKTRACE_LEVEL_MAX_NR 32
+/* end of RT-Thread Kernel */
+#define RT_USING_HW_ATOMIC
+#define RT_USING_CPU_FFS
+#define ARCH_ARM
+#define ARCH_ARM_CORTEX_M
+#define ARCH_ARM_CORTEX_M4
+
+/* RT-Thread Components */
+
+#define RT_USING_COMPONENTS_INIT
+#define RT_USING_USER_MAIN
+#define RT_MAIN_THREAD_STACK_SIZE 2048
+#define RT_MAIN_THREAD_PRIORITY 10
+#define RT_USING_MSH
+#define RT_USING_FINSH
+#define FINSH_USING_MSH
+#define FINSH_THREAD_NAME "tshell"
+#define FINSH_THREAD_PRIORITY 20
+#define FINSH_THREAD_STACK_SIZE 4096
+#define FINSH_USING_HISTORY
+#define FINSH_HISTORY_LINES 5
+#define FINSH_USING_SYMTAB
+#define FINSH_CMD_SIZE 80
+#define MSH_USING_BUILT_IN_COMMANDS
+#define FINSH_USING_DESCRIPTION
+#define FINSH_ARG_MAX 10
+#define FINSH_USING_OPTION_COMPLETION
+
+/* DFS: device virtual file system */
+
+/* end of DFS: device virtual file system */
+
+/* Device Drivers */
+
+#define RT_USING_DEVICE_IPC
+#define RT_UNAMED_PIPE_NUMBER 64
+#define RT_USING_SERIAL
+#define RT_USING_SERIAL_V1
+#define RT_SERIAL_USING_DMA
+#define RT_SERIAL_RB_BUFSZ 64
+#define RT_USING_HWCRYPTO
+#define RT_HWCRYPTO_DEFAULT_NAME "hwcrypto"
+#define RT_HWCRYPTO_IV_MAX_SIZE 16
+#define RT_HWCRYPTO_KEYBIT_MAX_SIZE 256
+#define RT_HWCRYPTO_USING_RNG
+#define RT_USING_PIN
+/* end of Device Drivers */
+
+/* C/C++ and POSIX layer */
+
+/* ISO-ANSI C layer */
+
+/* Timezone and Daylight Saving Time */
+
+#define RT_LIBC_USING_LIGHT_TZ_DST
+#define RT_LIBC_TZ_DEFAULT_HOUR 8
+#define RT_LIBC_TZ_DEFAULT_MIN 0
+#define RT_LIBC_TZ_DEFAULT_SEC 0
+/* end of Timezone and Daylight Saving Time */
+/* end of ISO-ANSI C layer */
+
+/* POSIX (Portable Operating System Interface) layer */
+
+
+/* Interprocess Communication (IPC) */
+
+
+/* Socket is in the 'Network' category */
+
+/* end of Interprocess Communication (IPC) */
+/* end of POSIX (Portable Operating System Interface) layer */
+/* end of C/C++ and POSIX layer */
+
+/* Network */
+
+/* end of Network */
+
+/* Memory protection */
+
+/* end of Memory protection */
+
+/* Utilities */
+
+/* end of Utilities */
+
+/* Using USB legacy version */
+
+/* end of Using USB legacy version */
+/* end of RT-Thread Components */
+
+/* RT-Thread Utestcases */
+
+/* end of RT-Thread Utestcases */
+
+/* RT-Thread online packages */
+
+/* IoT - internet of things */
+
+
+/* Wi-Fi */
+
+/* Marvell WiFi */
+
+/* end of Marvell WiFi */
+
+/* Wiced WiFi */
+
+/* end of Wiced WiFi */
+
+/* CYW43012 WiFi */
+
+/* end of CYW43012 WiFi */
+
+/* BL808 WiFi */
+
+/* end of BL808 WiFi */
+
+/* CYW43439 WiFi */
+
+/* end of CYW43439 WiFi */
+/* end of Wi-Fi */
+
+/* IoT Cloud */
+
+/* end of IoT Cloud */
+/* end of IoT - internet of things */
+
+/* security packages */
+
+/* end of security packages */
+
+/* language packages */
+
+/* JSON: JavaScript Object Notation, a lightweight data-interchange format */
+
+/* end of JSON: JavaScript Object Notation, a lightweight data-interchange format */
+
+/* XML: Extensible Markup Language */
+
+/* end of XML: Extensible Markup Language */
+/* end of language packages */
+
+/* multimedia packages */
+
+/* LVGL: powerful and easy-to-use embedded GUI library */
+
+/* end of LVGL: powerful and easy-to-use embedded GUI library */
+
+/* u8g2: a monochrome graphic library */
+
+/* end of u8g2: a monochrome graphic library */
+/* end of multimedia packages */
+
+/* tools packages */
+
+/* end of tools packages */
+
+/* system packages */
+
+/* enhanced kernel services */
+
+/* end of enhanced kernel services */
+
+/* acceleration: Assembly language or algorithmic acceleration packages */
+
+/* end of acceleration: Assembly language or algorithmic acceleration packages */
+
+/* CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */
+
+#define PKG_USING_CMSIS_CORE
+#define PKG_USING_CMSIS_CORE_LATEST_VERSION
+/* end of CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */
+
+/* Micrium: Micrium software products porting for RT-Thread */
+
+/* end of Micrium: Micrium software products porting for RT-Thread */
+/* end of system packages */
+
+/* peripheral libraries and drivers */
+
+/* HAL & SDK Drivers */
+
+/* STM32 HAL & SDK Drivers */
+
+#define PKG_USING_STM32F4_HAL_DRIVER
+#define PKG_USING_STM32F4_HAL_DRIVER_LATEST_VERSION
+#define PKG_USING_STM32F4_CMSIS_DRIVER
+#define PKG_USING_STM32F4_CMSIS_DRIVER_LATEST_VERSION
+/* end of STM32 HAL & SDK Drivers */
+
+/* Infineon HAL Packages */
+
+/* end of Infineon HAL Packages */
+
+/* Kendryte SDK */
+
+/* end of Kendryte SDK */
+
+/* WCH HAL & SDK Drivers */
+
+/* end of WCH HAL & SDK Drivers */
+
+/* AT32 HAL & SDK Drivers */
+
+/* end of AT32 HAL & SDK Drivers */
+
+/* HC32 DDL Drivers */
+
+/* end of HC32 DDL Drivers */
+
+/* NXP HAL & SDK Drivers */
+
+/* end of NXP HAL & SDK Drivers */
+
+/* NUVOTON Drivers */
+
+/* end of NUVOTON Drivers */
+
+/* GD32 Drivers */
+
+/* end of GD32 Drivers */
+
+/* HPMicro SDK */
+
+/* end of HPMicro SDK */
+/* end of HAL & SDK Drivers */
+
+/* sensors drivers */
+
+/* end of sensors drivers */
+
+/* touch drivers */
+
+/* end of touch drivers */
+/* end of peripheral libraries and drivers */
+
+/* AI packages */
+
+/* end of AI packages */
+
+/* Signal Processing and Control Algorithm Packages */
+
+/* end of Signal Processing and Control Algorithm Packages */
+
+/* miscellaneous packages */
+
+/* project laboratory */
+
+/* end of project laboratory */
+
+/* samples: kernel and components samples */
+
+/* end of samples: kernel and components samples */
+
+/* entertainment: terminal games and other interesting software packages */
+
+/* end of entertainment: terminal games and other interesting software packages */
+/* end of miscellaneous packages */
+
+/* Arduino libraries */
+
+
+/* Projects and Demos */
+
+/* end of Projects and Demos */
+
+/* Sensors */
+
+/* end of Sensors */
+
+/* Display */
+
+/* end of Display */
+
+/* Timing */
+
+/* end of Timing */
+
+/* Data Processing */
+
+/* end of Data Processing */
+
+/* Data Storage */
+
+/* Communication */
+
+/* end of Communication */
+
+/* Device Control */
+
+/* end of Device Control */
+
+/* Other */
+
+/* end of Other */
+
+/* Signal IO */
+
+/* end of Signal IO */
+
+/* Uncategorized */
+
+/* end of Arduino libraries */
+/* end of RT-Thread online packages */
+#define SOC_FAMILY_STM32
+#define SOC_SERIES_STM32F4
+
+/* Hardware Drivers Config */
+
+#define SOC_STM32F407VE
+
+/* Onboard Peripheral Drivers */
+
+/* On-chip Peripheral Drivers */
+
+#define BSP_USING_GPIO
+#define BSP_USING_UART
+#define BSP_STM32_UART_V1_TX_TIMEOUT 2000
+#define BSP_USING_UART1
+/* end of On-chip Peripheral Drivers */
+
+/* Board extended module Drivers */
+
+/* end of Hardware Drivers Config */
+
+#endif

bsp/stm32/stm32f407-micu/rtconfig.py

@@ -0,0 +1,185 @@
+import os
+
+# toolchains options
+ARCH='arm'
+CPU='cortex-m4'
+CROSS_TOOL='gcc'
+
+# bsp lib config
+BSP_LIBRARY_TYPE = None
+
+if os.getenv('RTT_CC'):
+    CROSS_TOOL = os.getenv('RTT_CC')
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+
+# cross_tool provides the cross compiler
+# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
+if  CROSS_TOOL == 'gcc':
+    PLATFORM    = 'gcc'
+    EXEC_PATH   = ''
+    # Example: set EXEC_PATH to your toolchain path, e.g. r'C:\Program Files\GNU Tools Arm Embedded\bin'
+elif CROSS_TOOL == 'keil':
+    PLATFORM    = 'armcc'
+    EXEC_PATH   = r'C:/Keil_v5'
+elif CROSS_TOOL == 'iar':
+    PLATFORM    = 'iccarm'
+    EXEC_PATH   = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.3'
+
+if os.getenv('RTT_EXEC_PATH'):
+    EXEC_PATH = os.getenv('RTT_EXEC_PATH')
+
+BUILD = 'debug'
+
+if PLATFORM == 'gcc':
+    # toolchains
+    PREFIX = 'arm-none-eabi-'
+    CC = PREFIX + 'gcc'
+    AS = PREFIX + 'gcc'
+    AR = PREFIX + 'ar'
+    CXX = PREFIX + 'g++'
+    LINK = PREFIX + 'gcc'
+    TARGET_EXT = 'elf'
+    SIZE = PREFIX + 'size'
+    OBJDUMP = PREFIX + 'objdump'
+    OBJCPY = PREFIX + 'objcopy'
+
+    DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections'
+    CFLAGS = DEVICE + ' -Dgcc'
+    AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
+    LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds'
+
+    CPATH = ''
+    LPATH = ''
+
+    if BUILD == 'debug':
+        CFLAGS += ' -O0 -gdwarf-2 -g'
+        AFLAGS += ' -gdwarf-2'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS 
+
+    POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
+
+elif PLATFORM == 'armcc':
+    # toolchains
+    CC = 'armcc'
+    CXX = 'armcc'
+    AS = 'armasm'
+    AR = 'armar'
+    LINK = 'armlink'
+    TARGET_EXT = 'axf'
+
+    DEVICE = ' --cpu Cortex-M4.fp '
+    CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99'
+    AFLAGS = DEVICE + ' --apcs=interwork '
+    LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict'
+    CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include'
+    LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib'
+
+    CFLAGS += ' -D__MICROLIB '
+    AFLAGS += ' --pd "__MICROLIB SETA 1" '
+    LFLAGS += ' --library_type=microlib '
+    EXEC_PATH += '/ARM/ARMCC/bin/'
+
+    if BUILD == 'debug':
+        CFLAGS += ' -g -O0'
+        AFLAGS += ' -g'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS 
+    CFLAGS += ' -std=c99'
+
+    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
+
+elif PLATFORM == 'armclang':
+    # toolchains
+    CC = 'armclang'
+    CXX = 'armclang'
+    AS = 'armasm'
+    AR = 'armar'
+    LINK = 'armlink'
+    TARGET_EXT = 'axf'
+
+    DEVICE = ' --cpu Cortex-M4.fp '
+    CFLAGS = ' --target=arm-arm-none-eabi -mcpu=cortex-m4 '
+    CFLAGS += ' -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 '
+    CFLAGS += ' -mfloat-abi=hard -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar '
+    CFLAGS += ' -gdwarf-3 -ffunction-sections '
+    AFLAGS = DEVICE + ' --apcs=interwork '
+    LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers '
+    LFLAGS += ' --list rt-thread.map '
+    LFLAGS += r' --strict --scatter "board\linker_scripts\link.sct" '
+    CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCLANG/include'
+    LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCLANG/lib'
+
+    EXEC_PATH += '/ARM/ARMCLANG/bin/'
+
+    if BUILD == 'debug':
+        CFLAGS += ' -g -O1' # armclang recommend
+        AFLAGS += ' -g'
+    else:
+        CFLAGS += ' -O2'
+        
+    CXXFLAGS = CFLAGS
+    CFLAGS += ' -std=c99'
+
+    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
+
+elif PLATFORM == 'iccarm':
+    # toolchains
+    CC = 'iccarm'
+    CXX = 'iccarm'
+    AS = 'iasmarm'
+    AR = 'iarchive'
+    LINK = 'ilinkarm'
+    TARGET_EXT = 'out'
+
+    DEVICE = '-Dewarm'
+
+    CFLAGS = DEVICE
+    CFLAGS += ' --diag_suppress Pa050'
+    CFLAGS += ' --no_cse'
+    CFLAGS += ' --no_unroll'
+    CFLAGS += ' --no_inline'
+    CFLAGS += ' --no_code_motion'
+    CFLAGS += ' --no_tbaa'
+    CFLAGS += ' --no_clustering'
+    CFLAGS += ' --no_scheduling'
+    CFLAGS += ' --endian=little'
+    CFLAGS += ' --cpu=Cortex-M4'
+    CFLAGS += ' -e'
+    CFLAGS += ' --fpu=VFPv4_sp'
+    CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
+    CFLAGS += ' --silent'
+
+    AFLAGS = DEVICE
+    AFLAGS += ' -s+'
+    AFLAGS += ' -w+'
+    AFLAGS += ' -r'
+    AFLAGS += ' --cpu Cortex-M4'
+    AFLAGS += ' --fpu VFPv4_sp'
+    AFLAGS += ' -S'
+
+    if BUILD == 'debug':
+        CFLAGS += ' --debug'
+        CFLAGS += ' -On'
+    else:
+        CFLAGS += ' -Oh'
+
+    LFLAGS = ' --config "board/linker_scripts/link.icf"'
+    LFLAGS += ' --entry __iar_program_start'
+
+    CXXFLAGS = CFLAGS
+    
+    EXEC_PATH = EXEC_PATH + '/arm/bin/'
+    POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'
+
+def dist_handle(BSP_ROOT, dist_dir):
+    import sys
+    cwd_path = os.getcwd()
+    sys.path.append(os.path.join(os.path.dirname(BSP_ROOT), 'tools'))
+    from sdk_dist import dist_do_building
+    dist_do_building(BSP_ROOT, dist_dir)

bsp/stm32/stm32f407-micu/template.eww

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\template.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+

bsp/stm32/stm32f407-micu/template.uvopt

@@ -0,0 +1,162 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>25000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>1</RunSim>
+        <RunTarget>0</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>0</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>0</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U30000299 -O207 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target>
+
+</ProjectOpt>

bsp/stm32/stm32f407-micu/template.uvoptx

@@ -0,0 +1,197 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj; *.o</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>0</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>18</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>3</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\CMSIS_AGDI.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>CMSIS_AGDI</Key>
+          <Name>-X"Any" -UAny -O206 -S8 -C0 -P00000000 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO65554 -TC10000000 -TT10000000 -TP20 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32F407VETx$CMSIS\Flash\STM32F4xx_512.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F4xx_512 -FL080000 -FS08000000 -FP0($$Device:STM32F407VETx$CMSIS\Flash\STM32F4xx_512.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F4xx_512 -FL080000 -FS08000000 -FP0($$Device:STM32F407VETx$CMSIS\Flash\STM32F4xx_512.FLM)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+      <DebugDescription>
+        <Enable>1</Enable>
+        <EnableFlashSeq>0</EnableFlashSeq>
+        <EnableLog>0</EnableLog>
+        <Protocol>2</Protocol>
+        <DbgClock>10000000</DbgClock>
+      </DebugDescription>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source Group 1</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+  </Group>
+
+</ProjectOpt>

bsp/stm32/stm32f407-micu/template.uvproj

@@ -0,0 +1,407 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>rt-thread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F407ZG</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <Cpu>IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile>"Startup\ST\STM32F4xx\startup_stm32f40_41xxx.s" ("STM32F40/41xxx Startup Code")</StartupFile>
+          <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</FlashDriverDll>
+          <DeviceId>6105</DeviceId>
+          <RegisterFile>stm32f4xx.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc>-DSTM32F40_41xxx</SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>SFD\ST\STM32F4xx\STM32F40x.sfr</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath>ST\STM32F4xx\</RegisterFilePath>
+          <DBRegisterFilePath>ST\STM32F4xx\</DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\keil\Obj\</OutputDirectory>
+          <OutputName>rt-thread</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\keil\List\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments>-MPU -REMAP</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>
+            <UsePdscDebugDescription>0</UsePdscDebugDescription>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>6</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4096</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>0</Im1Chk>
+            <Im2Chk>1</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+    </Target>
+  </Targets>
+
+</Project>

bsp/stm32/stm32f407-micu/template.uvprojx

@@ -0,0 +1,398 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>rt-thread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pArmCC>6240000::V6.24::ARMCLANG</pArmCC>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>1</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F407VETx</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <PackID>Keil.STM32F4xx_DFP.3.1.1</PackID>
+          <PackURL>https://www.keil.com/pack/</PackURL>
+          <Cpu>IRAM(0x20000000,0x00020000) IRAM2(0x10000000,0x00010000) IROM(0x08000000,0x00080000) CPUTYPE("Cortex-M4") FPU2 DSP CLOCK(12000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_512 -FS08000000 -FL080000 -FP0($$Device:STM32F407VETx$CMSIS\Flash\STM32F4xx_512.FLM))</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile></RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:STM32F407VETx$CMSIS\SVD\STM32F407.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\keil\Obj\</OutputDirectory>
+          <OutputName>rt-thread</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\keil\List\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments> -REMAP -MPU</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments> -MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4096</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <RvdsCdeCp>0</RvdsCdeCp>
+            <nBranchProt>0</nBranchProt>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>4</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>2</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>3</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <uGnu>0</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>3</v6Lang>
+            <v6LangP>3</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <ClangAsOpt>4</ClangAsOpt>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Source Group 1</GroupName>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+  <RTE>
+    <apis/>
+    <components/>
+    <files/>
+  </RTE>
+
+</Project>

bsp/stm32/stm32f407-robomaster-c/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f407-rt-spark/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f407-st-discovery/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f410-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f411-atk-nano/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f411-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f411-weact-blackpill/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f412-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f413-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f427-robomaster-a/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config