clang format ignore migration

* List of RT-Thread BSP Support Additions.

bsp/Vango/.clang-format-ignore

@@ -0,0 +1,9 @@
+
+# files format check exclude path, please follow the instructions below to modify;
+# If you need to exclude an entire folder, add the folder path in dir_path;
+# If you need to exclude a file, add the path to the file in file_path.
+
+# 从 .ignore_format.yml 迁移的规则
+
+/v85xx*/Libraries/CMSIS/
+/v85xx*/Libraries/VangoV85xx*_standard_peripheral/

bsp/microchip/.clang-format-ignore

@@ -2,6 +2,5 @@
 # If you need to exclude an entire folder, add the folder path in dir_path;
 # If you need to exclude a file, add the path to the file in file_path.
 
-dir_path:
-- CMSIS
-- VangoV85xx_standard_peripheral
+# 从 .ignore_format.yml 迁移的规则
+/sam*/bsp/

bsp/microchip/samd51-seeed-wio-terminal/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- bsp

bsp/microchip/same54/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- bsp

bsp/microchip/same70/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- bsp

bsp/microchip/saml10/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- bsp

bsp/mm32f103x/.clang-format-ignore

@@ -1,7 +1,7 @@
+
 # files format check exclude path, please follow the instructions below to modify;
 # If you need to exclude an entire folder, add the folder path in dir_path;
 # If you need to exclude a file, add the path to the file in file_path.
 
-dir_path:
-- Libraries/N32_Std_Driver
-
+# 从 .ignore_format.yml 迁移的规则
+/Libraries/

bsp/mm32f103x/.ignore_format.yml

@@ -1,4 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-
-dir_path:
-- Libraries

bsp/mm32f327x/.clang-format-ignore

@@ -1,9 +1,7 @@
+
 # files format check exclude path, please follow the instructions below to modify;
 # If you need to exclude an entire folder, add the folder path in dir_path;
 # If you need to exclude a file, add the path to the file in file_path.
 
-file_path:
-
-
-dir_path:
-- Libraries
+# 从 .ignore_format.yml 迁移的规则
+/Libraries/

bsp/mm32f327x/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- Libraries

bsp/mm32f526x/.clang-format-ignore

@@ -1,6 +1,7 @@
+
 # files format check exclude path, please follow the instructions below to modify;
 # If you need to exclude an entire folder, add the folder path in dir_path;
 # If you need to exclude a file, add the path to the file in file_path.
 
-dir_path:
-- bsp
+# 从 .ignore_format.yml 迁移的规则
+/Libraries/

bsp/mm32f526x/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- Libraries

bsp/mm32l07x/.clang-format-ignore

@@ -2,6 +2,5 @@
 # If you need to exclude an entire folder, add the folder path in dir_path;
 # If you need to exclude a file, add the path to the file in file_path.
 
-dir_path:
-- CMSIS
-- VangoV85xxP_standard_peripheral
+# 从 .ignore_format.yml 迁移的规则
+/Libraries/

bsp/mm32l3xx/.clang-format-ignore

@@ -2,5 +2,5 @@
 # If you need to exclude an entire folder, add the folder path in dir_path;
 # If you need to exclude a file, add the path to the file in file_path.
 
-dir_path:
-- bsp
+# 从 .ignore_format.yml 迁移的规则
+/Libraries/

bsp/n32/.clang-format-ignore

@@ -0,0 +1,7 @@
+
+# files format check exclude path, please follow the instructions below to modify;
+# If you need to exclude an entire folder, add the folder path in dir_path;
+# If you need to exclude a file, add the path to the file in file_path.
+
+# 从 .ignore_format.yml 迁移的规则
+/libraries/N32G45x_Firmware_Library/

bsp/n32/libraries/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- N32G45x_Firmware_Library

bsp/n32g452xx/.clang-format-ignore

@@ -0,0 +1,7 @@
+
+# files format check exclude path, please follow the instructions below to modify;
+# If you need to exclude an entire folder, add the folder path in dir_path;
+# If you need to exclude a file, add the path to the file in file_path.
+
+# 从 .ignore_format.yml 迁移的规则
+/Libraries/N32_Std_Driver/

bsp/nxp/.clang-format-ignore

@@ -0,0 +1,17 @@
+
+# files format check exclude path, please follow the instructions below to modify;
+# If you need to exclude an entire folder, add the folder path in dir_path;
+# If you need to exclude a file, add the path to the file in file_path.
+
+# 从 .ignore_format.yml 迁移的规则
+/imx/imxrt/imxrt1060-nxp-evk/board/board.c/
+/imx/imxrt/imxrt1060-nxp-evk/board/MCUX_Config/
+/imx/imxrt/imxrt1060-nxp-evk/xip/
+
+/imx/imxrt/libraries/MIMXRT1060/
+
+/lpc/lpc55sxx/Libraries/LPC55*/
+
+/mcx/mcxa/Libraries/MCXA153/
+/mcx/mcxc/Libraries/MCXC444/
+/mcx/mcxn/Libraries/MCXN947/

bsp/renesas/.clang-format-ignore

@@ -1,4 +1,14 @@
-# clang-format ignore file  
+# .clang-format-ignore File Description:
+# ----------------------------------------------------------------------------------------
+# 1. Used to specify which files or directories should be skipped by the clang-format tool.
+# 2. Follows syntax rules similar to .gitignore.
+# 3. Supports wildcard patterns and path matching.
+# 4. clang-format will recursively apply the .clang-format-ignore rules.
+
+# Renesas Vendor library
+<<<<<<< HEAD
 /**/ra/
 /**/ra_cfg/
 /**/ra_gen/
+/libraries/bsp-template/
+/**/RTE/

bsp/renesas/libraries/bsp-template/.ignore_format.yml

@@ -1,9 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- ra
-- ra_gen
-- ra_cfg
-- RTE

bsp/rockchip/.clang-format-ignore

@@ -0,0 +1,9 @@
+# .clang-format-ignore File Description:
+# ----------------------------------------------------------------------------------------
+# 1. Used to specify which files or directories should be skipped by the clang-format tool.
+# 2. Follows syntax rules similar to .gitignore.
+# 3. Supports wildcard patterns and path matching.
+# 4. clang-format will recursively apply the .clang-format-ignore rules.
+
+
+/common/rk_hal/

bsp/rockchip/common/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- rk_hal

bsp/stm32/.clang-format-ignore

@@ -0,0 +1,12 @@
+
+# files format check exclude path, please follow the instructions below to modify;
+# If you need to exclude an entire folder, add the folder path in dir_path;
+# If you need to exclude a file, add the path to the file in file_path.
+
+# 从 .ignore_format.yml 迁移的规则
+# 忽略所有 STM32 HAL 库目录
+/libraries/STM32*_HAL/
+
+# 忽略所有 STM32 BSP 的 CubeMX 配置目录
+/stm32*/board/CubeMX_Config/
+

bsp/stm32/libraries/.ignore_format.yml

@@ -1,23 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- STM32F0xx_HAL
-- STM32F1xx_HAL
-- STM32F2xx_HAL
-- STM32F3xx_HAL
-- STM32F4xx_HAL
-- STM32F7xx_HAL
-- STM32G0xx_HAL
-- STM32G4xx_HAL
-- STM32H7xx_HAL
-- STM32L0xx_HAL
-- STM32L1xx_HAL
-- STM32L4xx_HAL
-- STM32L5xx_HAL
-- STM32MPxx_HAL
-- STM32U5xx_HAL
-- STM32H5xx_HAL
-- STM32WBxx_HAL
-- STM32WLxx_HAL

bsp/stm32/libraries/templates/stm32l5xx/board/.ignore_format.yml

@@ -1,7 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config
-- linker_scripts

bsp/stm32/stm32f072-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f091-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-atk-nano/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-atk-warshipv3/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-blue-pill/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-dofly-M3S/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-dofly-lyc8/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-fire-arbitrary/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-gizwits-gokitv21/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-hw100k-ibox/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-keysking-learning/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-onenet-nbiot/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f103-yf-ufun/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f107-uc-eval/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f207-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f302-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f334-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f401-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f405-smdz-breadfruit/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f407-armfly-v5/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f407-atk-explorer/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f407-lckfb-skystar/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f407-robomaster-c/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f407-rt-spark/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f407-st-discovery/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f410-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f411-atk-nano/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f411-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f411-weact-blackpill/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f412-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f413-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f427-robomaster-a/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f429-armfly-v6/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f429-atk-apollo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f429-fire-challenger/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f429-st-disco/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f446-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f469-st-disco/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f723-st-disco/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f746-st-disco/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f746-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f767-atk-apollo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f767-fire-challenger-v1/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f767-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32f769-st-disco/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32g070-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32g071-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32g431-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32g474-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32g491-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32h503-st-nucleo/board/.ignore_format.yml

@@ -1,7 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config
-- linker_scripts

bsp/stm32/stm32h563-st-nucleo/board/.ignore_format.yml

@@ -1,7 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config
-- linker_scripts

bsp/stm32/stm32h723-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32h730-esphosted-evb/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32h743-armfly-v7/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32h743-atk-apollo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32h743-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32h747-st-discovery/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32h750-armfly-h7-tool/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32h750-artpi/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32h7r7-artpi2/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32h7s7-st-disco/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32l010-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32l053-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32l412-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32l431-BearPi/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32l432-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32l433-ali-startkit/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32l433-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32l452-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32l475-atk-pandora/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32l475-st-discovery/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32l476-st-nucleo/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config

bsp/stm32/stm32l496-ali-developer/board/.ignore_format.yml

@@ -1,6 +0,0 @@
-# files format check exclude path, please follow the instructions below to modify;
-# If you need to exclude an entire folder, add the folder path in dir_path;
-# If you need to exclude a file, add the path to the file in file_path.
-
-dir_path:
-- CubeMX_Config