The existing field func_info (in the SFrame FDE) is used to convey important
information around the encoding and interpretation of the rest of the
stack trace data for the respective SFrame FDE: the SFrame FRE type,
SFrame FDE PC type, etc.
Currently there is 1 bit left for AArch64, and 2 bits for AMD64, s390x
(and other future ABIs to be supported). Provision some additional
space now (specifically an additional 8-bits) for future needs for V3
and beyond.
Compared to V2, this now increases the size of SFrame FDE by 1 byte in
V3. In this patch, the additional func_info2 byte is not used
functionally yet. Hence, rather mechanical changes in libsframe, bfd
and libsframe/testsuite accompany. We will put func_info2 into use in a
later patch by reserving 5 of these bits for SFrame FDE types.
With the addition of a new byte for additional func info (func_info2),
add a new arg to allow usecases like textual dumper to get all data
members in one API: sframe_decoder_get_funcdesc_v3. To keep the APIs
symmetric looking, add new arg to sframe_encoder_add_funcdesc_v3 too.
Since bfd uses these APIs, carry out the mechanical change in the
respective APIs too. And of course, the testsuite which exercises these
APIs.
bfd/
* elf-sframe.c (_bfd_elf_merge_section_sframe): Get and set
func_info2.
* elf64-s390.c (_bfd_s390_elf_create_sframe_plt): Pass 0 for
func_info2 for SFrame FDE for PLT.
* elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Likewise.
gas/
* gen-sframe.c (output_sframe_funcdesc): Emit the uint8_t for
func_info2.
libsframe/
* sframe-dump.c (dump_sframe_func_with_fres):
* sframe.c (sframe_fde_tbl_init): Handle the new additional
member.
(sframe_encoder_write_fde): Likewise.
* sframe.c (sframe_decoder_get_funcdesc_v3): Update func_info2.
libsframe/testsuite/
* libsframe.decode/DATA2: Update data file with SFrame section
data.
* libsframe.encode/encode-1.c: Pass 0 for func_info2 arg.
* libsframe.find/findfre-1.c: Likewise.
* libsframe.find/findfunc-1.c: Likewise.
* libsframe.find/plt-findfre-1.c: Likewise.
* libsframe.find/plt-findfre-2.c: Likewise.
include/
* sframe.h: Add new uint8_t sfde_func_info2 to
sframe_func_desc_entry_v3.
* sframe-api.h (sframe_decoder_get_funcdesc_v3): New arg.
(sframe_encoder_add_funcdesc_v3): Likewise.
This change enables support text > 2 GiB in SFrame format.
Each SFrame FDE needs to hold information about the start PC of the
function it pertains to. Currently, the field 'sfde_func_start_address'
in SFrame FDE is encoded as a 32-bit offset to the start PC of the
function from the field itself.
In SFrame V2, this offset was a signed 32-bit offset. The signedness
gives the flexibility of having .sframe ELF section before or after the
.text* sections. But the size of 32-bit puts the limitation that
.sframe togther with the .text* sections must fit the 2 GiB range.
Currently, if the linker sees the offset not representable as 32-bit
signed offset, it issues an error (not seen in the wild, simulated by
forcing a function to align via an '.align 2147483648' directive):
test.o:(.sframe+0x1c): relocation truncated to fit: R_X86_64_PC32 against `.text'
make: *** [Makefile:7: all] Error 1
ATM, EH Frame also suffers with the same issue.
Moving forward, some cloud applications have been shown to be nearing
1.5 GiB threshold. Extending the offset to int64_t now seems to be good
choice to make now for future-proof'ing the sections.
The use of int64_t offset is done for all SFrame V3 sections. This
bump from int32_t to int64_t should not lead to an increase in the size
of SFrame sections, because of the following additional changes to the
SFrame FDE specification:
- Reduce the type of sfde_func_num_fres (from uint32_t to uint16_t)
- Remove the 2 bytes of padding (sfde_func_padding2). These served the
two-fold purpose of keeping FDE data aligned _and_ unused space for
future needs.
Now that the offset is int64_t, start using the
sframe_decoder_get_funcdesc_v3 () instead of
sframe_decoder_get_funcdesc_v2 () in GNU ld.
This patch changes the offset type in the SFrame FDE definition to an
int64_t. No further changes in gas are necessary because the code
already accounts for writing out as per the size of the member of the
struct:
emit_expr (&exp, sizeof_member (sframe_func_desc_entry,
sfde_func_start_offset));
bfd/
* elf-sframe.c (sframe_read_value): Signed offset for start PC
is 8-bytes now.
(_bfd_elf_merge_section_sframe): Likewise.
* elf64-s390.c (_bfd_s390_elf_create_sframe_plt): Use V3 API.
(elf_s390_finish_dynamic_sections): Signed offset for start PC
is 8-bytes now.
* elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Use V3 API.
(_bfd_x86_elf_finish_dynamic_sections): Signed offset for start
PC is 8-bytes now.
gas/
* sframe.c (output_sframe_funcdesc): Rename to
sfde_func_start_offset.
libsframe/
* libsframe/sframe.c (sframe_fde_tbl_init): Rename to
sfde_func_start_offset.
(flip_fde): Likewise.
(sframe_decoder_get_secrel_func_start_addr): Use int64_t.
(sframe_fre_check_range_p): Likewise.
(sframe_decoder_get_offsetof_fde_start_addr): Rename to
sfde_func_start_offset.
(sframe_get_funcdesc_with_addr_internal): Use int64_t.
(sframe_find_fre): Likewise.
(sframe_encoder_get_offsetof_fde_start_addr): Rename to
sfde_func_start_offset.
(sframe_encoder_add_funcdesc_internal): Use int64_t.
(sframe_encoder_add_funcdesc): Likewise. And rename to
sfde_func_start_offset.
(sframe_encoder_write_fde): Rename to sfde_func_start_offset.
libsframe/testsuite/
* libsframe.decode/DATA2: Regenerate the data file.
* libsframe.encode/encode-1.c: Use int64_t for start pc offset.
* libsframe.find/findfre-1.c: Likewise.
* libsframe.find/findfunc-1.c: Likewise.
* libsframe.find/plt-findfre-1.c: Likewise.
* libsframe.find/plt-findfre-2.c: Likewise.
include/
* sframe-api.h (sframe_find_fre): Update arg type to int64_t.
(sframe_encoder_add_funcdesc): Likewise.
* sframe.h: Change data type to int64_t.
Avoid warnings about invalid escapes in etc/update-copyright.py by
using raw strings, add BinutilsFilter to skip psql.rc and add
"Kalray SA." as another copyright holder.
Previous commit 4dc07bf6 missed making some of the testnames in encode-1
unique.
libsframe/testsuite/
PR libsframe/33437
* libsframe.encode/encode-1.c: Update test name to ensure they
are unique.
Fix PR libsframe/33437 - libsframe test names are not unique
The TEST () macro definition originally in plt-findfre-2.c, was being
used to differentiate between multiple runs of the testcases. Adapt
that definition a bit to allow for a variable number of arguments following
the test condition: A test name format string may be used by macro
users, such that the name of the tests are unique.
Move the new variadic TEST macro definition in the testsuite's common
header sframe-test.h, and use it throughout the testsuite.
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
libsframe/testsuite/
PR libsframe/33437
* libsframe.decode/be-flipping.c: Use new TEST macro with
suffix.
* libsframe.decode/frecnt-1.c: Likewise.
* libsframe.decode/frecnt-2.c: Likewise.
* libsframe.encode/encode-1.c: Likewise.
* libsframe.find/findfre-1.c: Likewise.
* libsframe.find/findfunc-1.c: Likewise.
* libsframe.find/plt-findfre-1.c: Likewise.
* libsframe.find/plt-findfre-2.c: Likewise.
* sframe-test.h: Move the TEST macro definition to this
testsuite header.
As reported in PR libsframe/33168, the libsframe tests don't build on
Solaris. The failure is
In file included from libsframe/testsuite/libsframe.decode/be-flipping.c:28:
/usr/include/dejagnu.h:48:1: error: conflicting types for ‘wait’; have ‘void(void)’
48 | wait (void)
| ^~~~
In file included from /usr/include/stdlib.h:16,
from libsframe/testsuite/libsframe.decode/be-flipping.c:21:
/usr/include/sys/wait.h:85:14: note: previous declaration of ‘wait’ with type ‘pid_t(int *)’ {aka ‘long int(int *)’}
85 | extern pid_t wait(int *);
| ^~~~
We have a combination of two factors here:
* Solaris <stdlib.h> has
and configure.ac predefines __EXTENSIONS__ due to the use of
AC_USE_SYSTEM_EXTENSIONS.
* This conflicts with <dejagnu.h>'s definition
void
wait (void)
{
...
}
While this version of wait was removed in upstream DejaGnu, the removal
only happened after the latest release, 1.6.3.
To avoid this, I've moved all testsuite includes into a new
sframe-test.h, adding a workaround for the wait conflict.
-Wall and -I$(srcdir) have been removed from AM_CPPFLAGS since they
don't seem to be needed. To fix the Makefile fragment duplication, the
local.mk files now use $(testsuite_LDADD) and $(testsuite_CPPFLAGS)
throughout.
Tested on {i386,amd64}-pc-solaris2.11, {sparc,sparcv9}-sun-solaris2.11,
{x86_64,i686}-pc-linux-gnu, and amd64-pc-freebsd14.0.
Coauthored-By: Alan Modra <amodra@gmail.com>
2025-08-31 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
Alan Modra <amodra@gmail.com>
libsframe:
PR libsframe/33168
* testsuite/sframe-test.h: New file.
* testsuite/libsframe.decode/be-flipping.c: Replace includes by
sframe-test.h.
* testsuite/libsframe.decode/frecnt-1.c: Likewise.
* testsuite/libsframe.decode/frecnt-2.c: Likewise.
* testsuite/libsframe.encode/encode-1.c: Likewise.
* testsuite/libsframe.find/findfre-1.c: Likewise.
* testsuite/libsframe.find/findfunc-1.c: Likewise.
* testsuite/libsframe.find/plt-findfre-1.c: Likewise.
* testsuite/libsframe.find/plt-findfre-2.c: Likewise.
* Makefile.am (AM_CPPFLAGS): Remove -I$(srcdir).
* Makefile.in: Regenerate.
* testsuite/local.mk (testsuite_LDADD): New variable.
(testsuite_CPPFLAGS): Likewise.
* testsuite/libsframe.decode/local.mk: Use $(testsuite_LDADD),
$(testsuite_CPPFLAGS).
* testsuite/libsframe.encode/local.mk: Likewise.
* testsuite/libsframe.find/local.mk: Likewise.
Use sframe_encoder_add_funcdesc_v2 instead of sframe_encoder_add_funcdesc.
Similarly, use sframe_decoder_get_funcdesc_v2 instead of
sframe_decoder_get_funcdesc.
sframe_encoder_add_funcdesc, and sframe_decoder_get_funcdesc were first
added for SFrame V1. For the purpose of these testcases, the two V2
APIs are (almost) functionally equivalent. In future, we may want to
make sframe_encoder_add_funcdesc and sframe_decoder_get_funcdesc
internal to libsframe only. Using the V2 named APIs is better for
clarity as well.
libsframe/testsuite/
* libsframe.encode/encode-1.c: Use V2 named APIs instead.
* libsframe.find/findfre-1.c: Likewise.
* libsframe.find/findfunc-1.c: Likewise.
* libsframe.decode/be-flipping.c: Likewise.
* libsframe.decode/frecnt-1.c: Likewise.
* libsframe.decode/frecnt-2.c: Likewise.
Previously, some of the libsframe tests were updated to reduce the usage
of magic numbers. This patch makes encode-1.c follow similar coding
style as other tests, reducing the number of magic constants.
libsframe/testsuite/
* libsframe.encode/encode-1.c: Avoid magic numbers.
This patch convenes a set of changes in bfd, gas, ld, libsframe towards
moving to the new encoding for the 'sfde_func_start_address' field in
SFrame FDE.
First, gas must now mark all SFrame sections with the new flag
SFRAME_F_FDE_FUNC_START_PCREL. gas was already emitting the field
in the said encoding.
* gas/gen-sframe.c (output_sframe_internal): Emit the flag
SFRAME_F_FDE_FUNC_START_PCREL.
Similarly for ld, adopt the new semantics of sfde_func_start_address
consistently. This means:
- When merging SFrame sections, check that all input SFrame sections
have the SFRAME_F_FDE_FUNC_START_PCREL flag set. If the check
fails, ld errors out.
- When merging SFrame sections, keep even the in-memory contents of
the FDE function start address (buffer passed to libsframe
sframe_encoder_write () for writing out) encoded in the new
semantics. While it is, in theory, possible that instead of doing this
change here, we adjust the value of sfde_func_start_address at the final
write (sframe_encoder_write) time. But latter is not favorable for
maintenanance and may be generally confusing for developers.
- When creating SFrame for PLT entries, emit flag
SFRAME_F_FDE_FUNC_START_PCREL.
include/
* sframe-api.h (SFRAME_F_LD_MUSTHAVE_FLAGS): New definition.
bfd/
* elf-sframe.c (_bfd_elf_merge_section_sframe): Check for flag
combinatation SFRAME_F_LD_MUSTHAVE_FLAGS set for all input and
output SFrame sections. If not, error out. Also, adopt the new
semantics of function start address encoding.
* bfd/elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Emit flag
SFRAME_F_FDE_FUNC_START_PCREL.
Next, for dumping SFrame sections, now that we are emitting the same
encoding in GAS, non-relocatable and relocatable SFrame links, it is the
time to set relocate to TRUE in debug_displays[].
binutils/
* dwarf.c (struct dwarf_section_display): Allow sframe sections
to now be relocated.
gas/testsuite/
* gas/cfi-sframe/cfi-sframe-aarch64-pac-ab-key-1.d: Update the
test. Relocatable SFrame sections now display non-zero value
(appropriate function start address).
Now, as the SFrame sections on-disk and in-memory use the new semantics of
sfde_func_start_address encoding (i.e., function start address is the
offset from the sfde_func_start_address field to the start PC), the
calculation to make it human readable (i.e., relatable to the addresses
in .text sections) needs adjustment.
libsframe/
* sframe-dump.c (dump_sframe_func_with_fres): Adjust the
function start address for dumping.
Now that both the emission of the new encoding, and the relocation of
sections before dumping them is in place, it is time to adjust the
testcases.
gas/testsuite/
* gas/cfi-sframe/cfi-sframe-aarch64-1.d: Update expected output
to include SFRAME_F_FDE_FUNC_START_PCREL instead of NONE.
* gas/cfi-sframe/cfi-sframe-aarch64-2.d: Likewise.
* gas/cfi-sframe/cfi-sframe-aarch64-3.d: Likewise.
* gas/cfi-sframe/cfi-sframe-aarch64-4.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-1.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-10.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-11.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-2.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-3.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-4.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-5.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-6.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-7.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-8.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-9.d: Likewise.
* gas/cfi-sframe/cfi-sframe-x86_64-1.d: Likewise.
* gas/cfi-sframe/cfi-sframe-x86_64-2.d: Likewise.
* gas/cfi-sframe/cfi-sframe-x86_64-empty-1.d: Likewise.
* gas/cfi-sframe/cfi-sframe-x86_64-empty-2.d: Likewise.
* gas/cfi-sframe/cfi-sframe-x86_64-empty-3.d: Likewise.
* gas/cfi-sframe/cfi-sframe-x86_64-empty-4.d: Likewise.
* gas/cfi-sframe/common-empty-1.d: Likewise.
* gas/cfi-sframe/common-empty-2.d: Likewise.
* gas/cfi-sframe/common-empty-3.d: Likewise.
* gas/scfi/x86_64/scfi-cfi-sections-1.d: Likewise.
* gas/scfi/x86_64/scfi-dyn-stack-1.d: Likewise.
ld/testsuite/
* ld-aarch64/sframe-simple-1.d: Update expected output to
include SFRAME_F_FDE_FUNC_START_PCREL.
* ld-x86-64/sframe-ibt-plt-1.d: Likewise.
* ld-x86-64/sframe-plt-1.d: Likewise.
* ld-x86-64/sframe-pltgot-1.d: Likewise.
* ld-x86-64/sframe-pltgot-2.d: Likewise.
* ld-x86-64/sframe-simple-1.d: Likewise.
Naturally, the change of semantics for 'SFrame FDE function start address'
has consequences on the implementation in libsframe. As per the new
semantics:
- Function start address in the SFrame FDE (sfde_func_start_address)
is an offset from the FDE function start address field to the start
PC of the associated function.
Note that, the libsframe library brings the SFrame section contents into
its own memory to create a sframe_decoder_ctx object via sframe_decode
(). Many internal and user-interfacing APIs then may use
sframe_decoder_ctx object to interact and fulfill the work.
In context of changing semantics for sfde_func_start_address, following
relevant examples may help understand the impact:
- sframe_find_fre () finds a the SFrame stack trace data (SFrame FRE)
given a lookup offset (offset of lookup_pc from the start of SFrame
section). Now that the sfde_func_start_address includes the
distance from the sfde_func_start_address field to the start of
SFrame section itself, the comparison checks of
sfde_func_start_address with the incoming lookup offset need
adjustment.
- Some internal functions (sframe_get_funcdesc_with_addr_internal ()
finds SFrame FDE by using binary seach comparing
sfde_func_start_address fields, etc.) need adjustments.
- sframe_encoder_write () sorts the SFrame FDEs before writing out
the SFrame data. Sorting of SFrame FDE via the internal function
sframe_sort_funcdesc() needs adjustments: the new encoding of
sfde_func_start_address means the distances are not from the same
anchor, so cannot be sorted directly.
This patch takes the approach of adding a new internal function:
- sframe_decoder_get_secrel_func_start_addr (): This function returns
the offset of the start PC of the function from the start of SFrame
section, i.e., it gives a section-relative offset.
As the sframe_decoder_get_secrel_func_start_addr () API needs the value
of the function index in the FDE list, another internal API needs
sframe_fre_check_range_p () adjustments too.
Sorting the FDEs (via sframe_sort_funcdesc ()) is done by first bringing
all offsets in sfde_func_start_address relative to start of SFrame
section, followed by sorting, and then readjusting the offsets accroding
to the new position in the FDE list.
libsframe/
* sframe.c (sframe_decoder_get_secrel_func_start_addr): New
static function.
(sframe_fre_check_range_p): Adjust the interface a bit.
(sframe_get_funcdesc_with_addr_internal): Use
sframe_decoder_get_secrel_func_start_addr () when comparing
sfde_func_start_address with user input offset.
(sframe_find_fre): Adopt the new semantics.
(sframe_sort_funcdesc): Likewise.
For the libsframe testsuite, use the new encoding for FDE func start
addr: distance between the FDE sfde_func_start_address field and the
start PC of the function itself.
Use SFRAME_F_FDE_FUNC_START_PCREL flag, though the sframe_encode ()
interface in libsframe applies no sanity checks for the encoding itself.
libsframe/testsuite/
* libsframe.find/findfre-1.c: Adjust to use the new
SFRAME_F_FDE_FUNC_START_PCREL specific encoding.
* libsframe.find/findfunc-1.c: Likewise.
* libsframe.find/plt-findfre-1.c: Likewise.
* libsframe/testsuite/libsframe.decode/DATA2: Update data file
due to usage of new SFRAME_F_FDE_FUNC_START_PCREL flag.
* libsframe/testsuite/libsframe.encode/encode-1.c: Use flag
SFRAME_F_FDE_FUNC_START_PCREL.
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
There are two places where unaligned loads were seen on aarch64:
- #1. access to the SFrame FRE stack offsets in the in-memory
representation/abstraction provided by libsframe.
- #2. access to the SFrame FRE start address in the on-disk representation
of the frame row entry.
For #1, we can fix this by reordering the struct members of
sframe_frame_row_entry in libsframe/sframe-api.h.
For #2, we need to default to using memcpy instead, and copy out the bytes
to a location for output.
SFrame format is an unaligned on-disk format. As such, there are other blobs
of memory in the on-disk SFrame FRE that are on not on their natural
boundaries. But that does not pose further problems yet, because the users
are provided access to the on-disk SFrame FRE data via libsframe's
sframe_frame_row_entry, the latter has its' struct members aligned on their
respective natural boundaries (and initialized using memcpy).
PR 29856 libsframe asan: load misaligned at sframe.c:516
ChangeLog:
PR libsframe/29856
* bfd/elf64-x86-64.c: Adjust as the struct members have been
reordered.
* libsframe/sframe.c (sframe_decode_fre_start_address): Use
memcpy to perform 16-bit/32-bit reads.
* libsframe/testsuite/libsframe.encode/encode-1.c: Adjust as the
struct members have been reordered.
include/ChangeLog:
PR libsframe/29856
* sframe-api.h: Reorder fre_offsets for natural alignment.
The new name better reflects the purpose of the function.
ChangeLog:
* bfd/elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Use new
name.
* libsframe/sframe.c (sframe_fde_create_func_info): Rename
sframe_fde_func_info to this.
* libsframe/testsuite/libsframe.encode/encode-1.c: Use new name.
include/ChangeLog:
* sframe-api.h (sframe_fde_create_func_info): Rename
sframe_fde_func_info to this.
libsframe is a library that allows you to:
- decode a .sframe section
- probe and inspect a .sframe section
- encode (and eventually write) a .sframe section.
This library is currently being used by the linker, readelf, objdump.
This library will also be used by the SFrame unwinder which is still
to be upstream'd.
The file include/sframe-api.h defines the user-facing APIs for decoding,
encoding and probing .sframe sections. A set of error codes together
with their error message strings are also defined.
Endian flipping is performed automatically at read and write time, if
cross-endianness is detected.
ChangeLog:
* Makefile.def: Add libsframe as new module with its
dependencies.
* Makefile.in: Regenerated.
* binutils/Makefile.am: Add libsframe.
* binutils/Makefile.in: Regenerated.
* configure: Regenerated
* configure.ac: Add libsframe to host_libs.
* libsframe/Makefile.am: New file.
* libsframe/Makefile.in: New file.
* libsframe/aclocal.m4: New file.
* libsframe/config.h.in: New file.
* libsframe/configure: New file.
* libsframe/configure.ac: New file.
* libsframe/sframe-error.c: New file.
* libsframe/sframe-impl.h: New file.
* libsframe/sframe.c: New file.
include/ChangeLog:
* sframe-api.h: New file.
testsuite/ChangeLog:
* libsframe/testsuite/Makefile.am: New file.
* libsframe/testsuite/Makefile.in: Regenerated.
* libsframe/testsuite/libsframe.decode/Makefile.am: New
file.
* libsframe/testsuite/libsframe.decode/Makefile.in:
Regenerated.
* libsframe/testsuite/libsframe.decode/decode.exp: New file.
* libsframe/testsuite/libsframe.encode/Makefile.am:
Likewise.
* libsframe/testsuite/libsframe.encode/Makefile.in:
Regenerated.
* libsframe/testsuite/libsframe.encode/encode.exp: New file.
* libsframe/testsuite/libsframe.encode/encode-1.c: Likewise.
* libsframe/testsuite/libsframe.decode/be-flipping.c: Likewise.
* libsframe/testsuite/libsframe.decode/frecnt-1.c: Likewise.
* libsframe/testsuite/libsframe.decode/frecnt-2.c: Likewise.
* libsframe/testsuite/libsframe.decode/DATA-BE: New file.
* libsframe/testsuite/libsframe.decode/DATA1: Likewise.
* libsframe/testsuite/libsframe.decode/DATA2: Likewise.
