297 Commits

Author	SHA1	Message	Date
Tom Tromey	ec29a63c80	Remove register_gdbarch_init ... This removes the deprecated register_gdbarch_init in favor a default argument to gdbarch_register. Regression tested on x86-64 Fedora 34.	2022-08-16 07:29:46 -06:00
Tom Tromey	cb275538db	Use registry in gdbarch ... gdbarch implements its own registry-like approach. This patch changes it to instead use registry.h. It's a rather large patch but largely uninteresting -- it's mostly a straightforward conversion from the old approach to the new one. The main benefit of this change is that it introduces type safety to the gdbarch registry. It also removes a bunch of code. One possible drawback is that, previously, the gdbarch registry differentiated between pre- and post-initialization setup. This doesn't seem very important to me, though.	2022-08-04 13:28:04 -06:00
Tom Tromey	b987c79ac1	Use new and delete for gdbarch ... This changes gdbarch to use new and delete.	2022-08-04 13:28:04 -06:00
Tom Tromey	0655397b57	Use bool in gdbarch ... This changes gdbarch to use bool for initialized_p.	2022-08-04 13:28:04 -06:00
Andrew Burgess	ab25d9bbe4	gdb: rename gdbarch_tdep struct to fix g++ 4.8 build ... After the commit: commit 08106042d9 Date: Thu May 19 13:20:17 2022 +0100 gdb: move the type cast into gdbarch_tdep GDB would no longer build using g++ 4.8. The issue appears to be some confusion caused by GDB having 'struct gdbarch_tdep', but also a templated function called 'gdbarch_tdep'. Prior to the above commit the gdbarch_tdep function was not templated, and this compiled just fine. Note that the above commit compiles just fine with later versions of g++, so this issue was clearly fixed at some point, though I've not tried to track down exactly when. In this commit I propose to fix the g++ 4.8 build problem by renaming 'struct gdbarch_tdep' to 'struct gdbarch_tdep_base'. This rename better represents that the struct is only ever used as a base class, and removes the overloading of the name, which allows GDB to build with g++ 4.8. I've also updated the comment on 'struct gdbarch_tdep_base' to fix a typo, and the comment on the 'gdbarch_tdep' function, to mention that in maintainer mode a run-time type check is performed.	2022-07-26 12:04:07 +01:00
Andrew Burgess	08106042d9	gdb: move the type cast into gdbarch_tdep ... I built GDB for all targets on a x86-64/GNU-Linux system, and then (accidentally) passed GDB a RISC-V binary, and asked GDB to "run" the binary on the native target. I got this error: (gdb) show architecture The target architecture is set to "auto" (currently "i386"). (gdb) file /tmp/hello.rv32.exe Reading symbols from /tmp/hello.rv32.exe... (gdb) show architecture The target architecture is set to "auto" (currently "riscv:rv32"). (gdb) run Starting program: /tmp/hello.rv32.exe ../../src/gdb/i387-tdep.c:596: internal-error: i387_supply_fxsave: Assertion `tdep->st0_regnum >= I386_ST0_REGNUM' failed. What's going on here is this; initially the architecture is i386, this is based on the default architecture, which is set based on the native target. After loading the RISC-V executable the architecture of the current inferior is updated based on the architecture of the executable. When we "run", GDB does a fork & exec, with the inferior being controlled through ptrace. GDB sees an initial stop from the inferior as soon as the inferior comes to life. In response to this stop GDB ends up calling save_stop_reason (linux-nat.c), which ends up trying to read register from the inferior, to do this we end up calling target_ops::fetch_registers, which, for the x86-64 native target, calls amd64_linux_nat_target::fetch_registers. After this I eventually end up in i387_supply_fxsave, different x86 based targets will end in different functions to fetch registers, but it doesn't really matter which function we end up in, the problem is this line, which is repeated in many places: i386_gdbarch_tdep *tdep = (i386_gdbarch_tdep *) gdbarch_tdep (arch); The problem here is that the ARCH in this line comes from the current inferior, which, as we discussed above, will be a RISC-V gdbarch, the tdep field will actually be of type riscv_gdbarch_tdep, not i386_gdbarch_tdep. After this cast we are relying on undefined behaviour, in my case I happen to trigger an assert, but this might not always be the case. The thing I tried that exposed this problem was of course, trying to start an executable of the wrong architecture on a native target. I don't think that the correct solution for this problem is to detect, at the point of cast, that the gdbarch_tdep object is of the wrong type, but, I did wonder, is there a way that we could protect ourselves from incorrectly casting the gdbarch_tdep object? I think that there is something we can do here, and this commit is the first step in that direction, though no actual check is added by this commit. This commit can be split into two parts: (1) In gdbarch.h and arch-utils.c. In these files I have modified gdbarch_tdep (the function) so that it now takes a template argument, like this: template<typename TDepType> static inline TDepType * gdbarch_tdep (struct gdbarch *gdbarch) { struct gdbarch_tdep *tdep = gdbarch_tdep_1 (gdbarch); return static_cast<TDepType *> (tdep); } After this change we are no better protected, but the cast is now done within the gdbarch_tdep function rather than at the call sites, this leads to the second, much larger change in this commit, (2) Everywhere gdbarch_tdep is called, we make changes like this: - i386_gdbarch_tdep *tdep = (i386_gdbarch_tdep *) gdbarch_tdep (arch); + i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (arch); There should be no functional change after this commit. In the next commit I will build on this change to add an assertion in gdbarch_tdep that checks we are casting to the correct type.	2022-07-21 15:19:42 +01:00
Tom Tromey	6cb06a8cda	Unify gdb printf functions ... Now that filtered and unfiltered output can be treated identically, we can unify the printf family of functions. This is done under the name "gdb_printf". Most of this patch was written by script.	2022-03-29 12:46:24 -06:00
Tom Tromey	dedb7102b3	Fix another crash with gdb parameters in Python ... While looking into the language-capturing issue, I found another way to crash gdb using parameters from Python: (gdb) python print(gdb.parameter('endian')) (This is related to PR python/12188, though this patch isn't going to fix what that bug is really about.) The problem here is that the global variable that underlies the "endian" parameter is initialized to NULL. However, that's not a valid value for an "enum" set/show parameter. My understanding is that, in gdb, an "enum" parameter's underlying variable must have a value that is "==" (not just strcmp-equal) to one of the values coming from the enum array. This invariant is relied on in various places. I started this patch by fixing the problem with "endian". Then I added some assertions to add_setshow_enum_cmd to try to catch other problems of the same type. This patch fixes all the problems that I found. I also looked at all the calls to add_setshow_enum_cmd to ensure that they were all included in the gdb I tested. I think they are: there are no calls in nat-* files, or in remote-sim.c; and I was trying a build with all targets, Python, and Guile enabled. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=12188	2022-01-26 06:49:51 -07:00
Joel Brobecker	4a94e36819	Automatic Copyright Year update after running gdb/copyright.py ... This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script.	2022-01-01 19:13:23 +04:00
Tom Tromey	3de0d96078	Use filtered output in show callbacks ... "show" command callbacks, like most ordinary gdb commands, should use filtered output. I found a few that did not, so this patch changes them to use the filtered form.	2021-12-29 11:08:14 -07:00
Tom Tromey	728ab7b643	Send arch-utils error messages to gdb_stderr ... This changes arch-utils.c to send some error messages to gdb_stderr. This is part of PR gdb/7233. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233	2021-12-29 10:40:10 -07:00
Tom Tromey	74fcd19c51	Move ordinary gdbarch code to arch-utils ... While I think it makes sense to generate gdbarch.c, at the same time I think it is better for ordinary code to be editable in a C file -- not as a hunk of C code embedded in the generator. This patch moves this sort of code out of gdbarch.sh and gdbarch.c and into arch-utils.c, then has arch-utils.c include gdbarch.c.	2021-12-17 14:53:44 -07:00
Aaron Merey	aa95b2d438	gdb: Add aliases for read_core_file_mappings callbacks ... Add aliases read_core_file_mappings_loop_ftype and read_core_file_mappings_pre_loop_ftype. Intended for use with read_core_file_mappings. Also add build_id parameter to read_core_file_mappings_loop_ftype.	2021-11-16 22:29:51 -05:00
Simon Marchi	9b1f59fc95	gdb: make gdbarch_printable_names return a vector ... I noticed that gdbarch_selftest::operator() leaked the value returned by gdbarch_printable_names. Make gdbarch_printable_names return an std::vector and update callers. That makes it easier for everyone involved, less manual memory management. Change-Id: Ia8fc028bdb91f787410cca34f10bf3c5a6da1498	2021-08-12 15:20:26 -04:00
Simon Marchi	b447dd03c1	gdb: remove gdbarch_info_init ... While reviewing another patch, I realized that gdbarch_info_init could easily be removed in favor of initializing gdbarch_info fields directly in the struct declaration. The only odd part is the union. I don't know if it's actually important for it to be zero-initialized, but I presume it is. I added a constructor to gdbarch_info to take care of that. A proper solution would be to use std::variant. Or, these could also be separate fields, the little extra space required wouldn't matter. gdb/ChangeLog: * gdbarch.sh (struct gdbarch_info): Initialize fields, add constructor. * gdbarch.h: Re-generate. * arch-utils.h (gdbarch_info_init): Remove, delete all usages. * arch-utils.c (gdbarch_info_init): Remove. Change-Id: I7502e08fe0f278d84eef1667a072e8a97bda5ab5	2021-06-28 11:49:22 -04:00
Simon Marchi	5e84b7eefb	gdb: remove add_alias_cmd overload that accepts a string ... Same idea as previous patch, but for add_alias_cmd. Remove the overload that accepts the target command as a string (the target command name), leaving only the one that takes the cmd_list_element. gdb/ChangeLog: * command.h (add_alias_cmd): Accept target as cmd_list_element. Update callers. Change-Id: I546311f411e9e7da9302322d6ffad4e6c56df266	2021-05-27 14:00:08 -04:00
Andrew Burgess	05f3c0f09e	gdb: allow default_addressable_memory_unit_size to handle more cases ... Currently default_addressable_memory_unit_size always returns 1, indicating 1 byte is 1 octet. If a target has something other than this (common) setup then the target should override the default_addressable_memory_unit_size. However, the bfd library already knows about each targets octets per byte, so it seems redundant making targets override this method to tell GDB something it already knows (through bfd). In this commit I propose to make default_addressable_memory_unit_size return a value based on bfd's bits per byte. I checked, and for every target that GDB currently supports the bits per byte in bfd is 8, so the current behaviour will not change. In fact, the only targets in bfd that have bits per byte set to something other than 8 can be found in cpu-tic4x.c and cpu-tic54x.c, I don't believe these are supported by GDB right now. I don't propose to remove the ability to override default_addressable_memory_unit_size, this allows targets additional flexibility for how to handle weird combinations of byte sizes. This change was motivated by an out of tree target I was working on, but it seemed like it was a good change that others might benefit from. There should be no user visible changes after this commit. gdb/ChangeLog: * arch-utils.c (default_addressable_memory_unit_size): Return a value based on bfd's bits per byte.	2021-04-22 09:16:54 +01:00
Luis Machado	1b6b755e91	Print bfloat16 DWARF types correctly ... Even if the DWARF information contains a bfloat16 base type (__bf16), a variable of such type will still be printed using the IEEE half float format, which is wrong. This patch teaches GDB how to pick the bfloat16 format for __bf16 types in DWARF (based on the base type name) and uses IEEE half float for all the other 16-bit float formats. Tested on aarch64-linux/x86_64-linux. OK? gdb/ChangeLog: 2021-04-16 Luis Machado <luis.machado@linaro.org> * arch-utils.c (default_floatformat_for_type): Handle bfloat16. gdb/testsuite: 2021-04-16 Luis Machado <luis.machado@linaro.org> * gdb.dwarf2/dw2-bfloat16.exp: New file.	2021-04-16 11:14:16 -03:00
Luis Machado	c193949e75	New gdbarch memory tagging hooks ... We need some new gdbarch hooks to help us manipulate memory tags without having to have GDB call the target methods directly. This patch adds the following hooks: gdbarch_memtag_to_string -- Returns a printable string corresponding to the tag. gdbarch_tagged_address_p -- Checks if a particular address is protected with memory tagging. gdbarch_memtag_matches_p -- Checks if the logical tag of a pointer and the allocation tag from the address the pointer points to matches. gdbarch_set_memtags: -- Sets either the allocation tag or the logical tag for a particular value. gdbarch_get_memtag: -- Gets either the allocation tag or the logical tag for a particular value. gdbarch_memtag_granule_size -- Sets the memory tag granule size, which represents the number of bytes a particular allocation tag covers. For example, this is 16 bytes for AArch64's MTE. I've used struct value as opposed to straight CORE_ADDR so other architectures can use the infrastructure without having to rely on a particular type for addresses/pointers. Some architecture may use pointers of 16 bytes that don't fit in a CORE_ADDR, for example. gdb/ChangeLog: 2021-03-24 Luis Machado <luis.machado@linaro.org> * arch-utils.c (default_memtag_to_string, default_tagged_address_p) (default_memtag_matches_p, default_set_memtags) (default_get_memtag): New functions. * arch-utils.h (default_memtag_to_string, default_tagged_address_p) (default_memtag_matches_p, default_set_memtags) (default_get_memtag): New prototypes. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (memtag_to_string, tagged_address_p, memtag_matches_p) (set_memtags, get_memtag, memtag_granule_size): New gdbarch hooks. (enum memtag_type): New enum.	2021-03-24 14:47:52 -03:00
Joel Brobecker	3666a04883	Update copyright year range in all GDB files ... This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.	2021-01-01 12:12:21 +04:00
Simon Marchi	70125a45e4	gdb: remove other parameter in read_core_file_mappings parameter ... The `void *other` parameter in read_core_file_mappings' loop_cb parameter is never used, remove it. gdb/ChangeLog: * gdbarch.sh (read_core_file_mappings): Remove `other` parameter in `loop_cb` parameter. * gdbarch.c: Re-generate. * gdbarch.h: Re-generate. * arch-utils.c (default_read_core_file_mappings): Remove `other` parameter. * arch-utils.h (default_read_core_file_mappings): Likewise. * corelow.c (core_target::build_file_mappings): Likewise. * linux-tdep.c (linux_read_core_file_mappings): Likewise. (linux_core_info_proc_mappings): Likewise. Change-Id: I6f408b4962b61b8a603642a844772b3026625523	2020-11-19 10:34:57 -05:00
Simon Marchi	dda83cd783	gdb, gdbserver, gdbsupport: fix leading space vs tabs issues ... Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695	2020-11-02 10:28:45 -05:00
Simon Marchi	40a5376690	gdb: remove parameter of gdbarch_displaced_step_hw_singlestep ... I noticed that the closure parameter of gdbarch_displaced_step_hw_singlestep is never used by any implementation of the method, so this patch removes it. gdb/ChangeLog: * gdbarch.sh (displaced_step_hw_singlestep): Remove closure parameter. * aarch64-tdep.c (aarch64_displaced_step_hw_singlestep): Likewise. * aarch64-tdep.h (aarch64_displaced_step_hw_singlestep): Likewise. * arch-utils.c (default_displaced_step_hw_singlestep): Likewise. * arch-utils.h (default_displaced_step_hw_singlestep): Likewise. * rs6000-tdep.c (ppc_displaced_step_hw_singlestep): Likewise. * s390-tdep.c (s390_displaced_step_hw_singlestep): Likewise. * gdbarch.c: Re-generate. * gdbarch.h: Re-generate. * infrun.c (resume_1): Adjust. Change-Id: I7354f0b22afc2692ebff0cd700a462db8f389fc1	2020-10-29 18:02:13 -04:00
Tom Tromey	7e10abd146	Remove the exec_bfd macro ... This removes the exec_bfd macro, in favor of new accessors on program_space. In one spot the accessor can't be used; but this is still a big improvement over the macro, IMO. gdb/ChangeLog 2020-10-29 Tom Tromey <tom@tromey.com> * windows-tdep.c (windows_solib_create_inferior_hook): Update. * symfile.c (reread_symbols): Update. * symfile-mem.c (add_symbol_file_from_memory_command) (add_vsyscall_page): Update. * source-cache.c (source_cache::get_plain_source_lines): Update. * solib-svr4.c (find_program_interpreter, elf_locate_base) (svr4_current_sos_direct, svr4_exec_displacement) (svr4_relocate_main_executable): Update. (svr4_iterate_over_objfiles_in_search_order): Update. * solib-frv.c (enable_break2, enable_break): Update. * solib-dsbt.c (lm_base, enable_break): Update. * solib-darwin.c (find_program_interpreter) (darwin_solib_create_inferior_hook): Update. * sol-thread.c (rw_common, ps_pdmodel): Update. * rs6000-nat.c (rs6000_nat_target::create_inferior): Update. * remote.c (compare_sections_command) (remote_target::trace_set_readonly_regions): Update. * remote-sim.c (get_sim_inferior_data) (gdbsim_target::create_inferior, gdbsim_target::create_inferior): Update. (gdbsim_target_open, gdbsim_target::files_info): Update. * exec.h (exec_bfd): Remove macro. * progspace.c (initialize_progspace): Update. * proc-service.c (ps_addr_to_core_addr, core_addr_to_ps_addr): Update. * nto-procfs.c (nto_procfs_target::post_attach) (nto_procfs_target::create_inferior): Update. * maint.c (maintenance_info_sections): Update. * linux-thread-db.c (thread_db_target::get_thread_local_address): Update. * infcmd.c (post_create_inferior): Update. * gcore.c (default_gcore_arch, default_gcore_target): Update. (objfile_find_memory_regions): Update. * exec.c (validate_exec_file, exec_file_attach) (exec_read_partial_read_only, print_section_info): Update. * corelow.c (core_target_open): Update. * corefile.c (reopen_exec_file, validate_files): Update. * arm-tdep.c (gdb_print_insn_arm): Update. * arch-utils.c (gdbarch_update_p, default_print_insn): Update. * progspace.h (struct program_space) <exec_bfd, set_exec_bfd>: New methods.	2020-10-29 15:04:36 -06:00
Simon Marchi	07fbbd0138	gdb: make gdbarch_displaced_step_hw_singlestep return bool ... Replace the int-used-as-a-bool with a bool. gdb/ChangeLog: * gdbarch.sh (displaced_step_hw_singlestep): Return bool. * gdbarch.c: Re-generate. * gdbarch.h: Re-generate. * aarch64-tdep.c (aarch64_displaced_step_hw_singlestep): Return bool. * aarch64-tdep.h (aarch64_displaced_step_hw_singlestep): Likewise. * arch-utils.h (default_displaced_step_hw_singlestep): Likewise. * arch-utils.c (default_displaced_step_hw_singlestep): Likewise. * rs6000-tdep.c (ppc_displaced_step_hw_singlestep): Likewise. * s390-tdep.c (s390_displaced_step_hw_singlestep): Likewise. Change-Id: I76a78366dc5c0afb03f8f4bddf9f4e8d68fe3114	2020-10-20 17:39:48 -04:00
Kevin Buettner	7e183d2736	Add new gdbarch method, read_core_file_mappings ... The new gdbarch method, read_core_file_mappings, will be used for reading file-backed mappings from a core file. It'll be used for two purposes: 1) to construct a table of file-backed mappings in corelow.c, and 2) for display of core file mappings. For Linux, I tried a different approach in which knowledge of the note format was placed directly in corelow.c. This seemed okay at first; it was only one note format and the note format was fairly simple. After looking at FreeBSD's note/mapping reading code, I concluded that it's best to leave architecture specific details for decoding the note in (architecture specific) tdep files. With regard to display of core file mappings, I experimented with placing the mappings display code in corelow.c. It has access to the file-backed mappings which were read in when the core file was loaded. And, better, still common code could be used for all architectures. But, again, the FreeBSD mapping code convinced me that this was not the best approach since it has even more mapping info than Linux. Display code which would work well for Linux will leave out mappings as well as protection info for mappings. So, for these reasons, I'm introducing a new gdbarch method for reading core file mappings. gdb/ChangeLog: * arch-utils.c (default_read_core_file_mappings): New function. * arch-utils.c (default_read_core_file_mappings): Declare. * gdbarch.sh (read_core_file_mappings): New gdbarch method. * gdbarch.h, gdbarch.c: Regenerate.	2020-07-22 12:44:13 -07:00
Andrew Burgess	f63dcaf808	gdb: Improve formatting of 'show endian' messages ... This commit changes the output of 'show endian'. Here is a session before this commit: (gdb) show endian The target endianness is set automatically (currently little endian) (gdb) set endian big The target is assumed to be big endian (gdb) show endian The target is assumed to be big endian (gdb) After this commit the session now looks like this: (gdb) show endian The target endianness is set automatically (currently little endian). (gdb) set endian big The target is set to big endian. (gdb) show endian The target is set to big endian. (gdb) The changes are: 1. Each line ends with '.', and 2. After setting the endianness GDB is now a little more assertive; 'target is set to' not 'target is assumed to be', the user did just tell us after all!	2020-07-14 13:21:42 +01:00
Andrew Burgess	ccb9eba6a2	gdb: Improve formatting of 'show architecture' messages ... This commit changes the output of 'show architecture'. Here is a session before this commit: (gdb) show architecture The target architecture is set automatically (currently i386) (gdb) set architecture mips The target architecture is assumed to be mips (gdb) show architecture The target architecture is assumed to be mips (gdb) After this commit the session now looks like this: (gdb) show architecture The target architecture is set to "auto" (currently "i386"). (gdb) set architecture mips The target architecture is set to "mips". (gdb) show architecture The target architecture is set to "mips". (gdb) The changes are: 1. The value is now enclosed in quotes, 2. Each line ends with '.', and 3. After setting the architecture GDB is now a little more assertive; 'architecture is set to' not 'is assumed to be', the user did just tell us after all! gdb/ChangeLog: * arch-utils.c (show_architecture): Update formatting of messages. gdb/testsuite/ChangeLog: * gdb.arch/amd64-osabi.exp: Update. * gdb.arch/arm-disassembler-options.exp: Update. * gdb.arch/powerpc-disassembler-options.exp: Update. * gdb.arch/ppc64-symtab-cordic.exp: Update. * gdb.arch/s390-disassembler-options.exp: Update. * gdb.base/all-architectures.exp.tcl: Update. * gdb.base/attach-pie-noexec.exp: Update. * gdb.base/catch-syscall.exp: Update. * gdb.xml/tdesc-arch.exp: Update.	2020-07-14 13:21:42 +01:00
Luis Machado	5133a31537	Recognize more program breakpoint patterns ... New in v3: - Code cleanups based on reviews. New in v2: - Fixed misc problems based on reviews. - Switched to using gdbarch_program_breakpoint_here_p as opposed to gdbarch_insn_is_breakpoint. - Fixed matching of brk instructions. Previously the mask was incorrect, which was showing up as a few failures in the testsuite. Now it is clean. - New testcase (separate patch). - Moved program_breakpoint_here () to arch-utils.c and made it the default implementation of gdbarch_program_breakpoint_here_p. -- It was reported to me that program breakpoints (permanent ones inserted into the code itself) other than the one GDB uses for AArch64 (0xd4200000) do not generate visible stops when continuing, and GDB will continue spinning infinitely. This happens because GDB, upon hitting one of those program breakpoints, thinks the SIGTRAP came from a delayed breakpoint hit... (gdb) x/i $pc => 0x4005c0 <problem_function>: brk #0x90f (gdb) c Continuing. infrun: clear_proceed_status_thread (process 14198) infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT) infrun: proceed: resuming process 14198 infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0 infrun: infrun_async(1) infrun: prepare_to_wait infrun: target_wait (-1.0.0, status) = infrun: 14198.14198.0 [process 14198], infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP infrun: stop_pc = 0x4005c0 infrun: delayed software breakpoint trap, ignoring infrun: no stepping, continue infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0 infrun: prepare_to_wait infrun: target_wait (-1.0.0, status) = infrun: 14198.14198.0 [process 14198], infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP infrun: stop_pc = 0x4005c0 infrun: delayed software breakpoint trap, ignoring infrun: no stepping, continue infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0 infrun: prepare_to_wait infrun: target_wait (-1.0.0, status) = infrun: 14198.14198.0 [process 14198], infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP infrun: stop_pc = 0x4005c0 infrun: delayed software breakpoint trap, ignoring infrun: no stepping, continue infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0 infrun: prepare_to_wait infrun: target_wait (-1.0.0, status) = infrun: 14198.14198.0 [process 14198], infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP infrun: stop_pc = 0x4005c0 infrun: delayed software breakpoint trap, ignoring infrun: no stepping, continue infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0 infrun: prepare_to_wait infrun: target_wait (-1.0.0, status) = infrun: 14198.14198.0 [process 14198], infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP ... ... which is not the case. If the program breakpoint is one GDB recognizes, then it will stop when it hits it. (gdb) x/i $pc => 0x4005c0 <problem_function>: brk #0x0 (gdb) c Continuing. infrun: clear_proceed_status_thread (process 14193) infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT) infrun: proceed: resuming process 14193 infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14193] at 0x4005c0 infrun: infrun_async(1) infrun: prepare_to_wait infrun: target_wait (-1.0.0, status) = infrun: 14193.14193.0 [process 14193], infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP infrun: stop_pc = 0x4005c0 infrun: random signal (GDB_SIGNAL_TRAP) infrun: stop_waiting infrun: stop_all_threads infrun: stop_all_threads, pass=0, iterations=0 infrun: process 14193 not executing infrun: stop_all_threads, pass=1, iterations=1 infrun: process 14193 not executing infrun: stop_all_threads done Program received signal SIGTRAP, Trace/breakpoint trap. problem_function () at brk_0.c:7 7 asm("brk %0\n\t" ::"n"(0x0)); infrun: infrun_async(0) Otherwise GDB will keep trying to resume the inferior and will keep seeing the SIGTRAP's, without stopping. To the user it appears GDB has gone into an infinite loop, interruptible only by Ctrl-C. Also, windbg seems to use a different variation of AArch64 breakpoint compared to GDB. This causes problems when debugging Windows on ARM binaries, when program breakpoints are being used. The proposed patch creates a new gdbarch method (gdbarch_program_breakpoint_here_p) that tells GDB whether the underlying instruction is a breakpoint instruction or not. This is more general than only checking for the instruction GDB uses as breakpoint. The existing logic is still preserved for targets that do not implement this new gdbarch method. The end result is like so: (gdb) x/i $pc => 0x4005c0 <problem_function>: brk #0x90f (gdb) c Continuing. infrun: clear_proceed_status_thread (process 16417) infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT) infrun: proceed: resuming process 16417 infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 16417] at 0x4005c0 infrun: infrun_async(1) infrun: prepare_to_wait infrun: target_wait (-1.0.0, status) = infrun: 16417.16417.0 [process 16417], infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP infrun: stop_pc = 0x4005c0 infrun: random signal (GDB_SIGNAL_TRAP) infrun: stop_waiting infrun: stop_all_threads infrun: stop_all_threads, pass=0, iterations=0 infrun: process 16417 not executing infrun: stop_all_threads, pass=1, iterations=1 infrun: process 16417 not executing infrun: stop_all_threads done Program received signal SIGTRAP, Trace/breakpoint trap. problem_function () at brk.c:7 7 asm("brk %0\n\t" ::"n"(0x900 + 0xf)); infrun: infrun_async(0) gdb/ChangeLog: 2020-01-29 Luis Machado <luis.machado@linaro.org> * aarch64-tdep.c (BRK_INSN_MASK): Define to 0xffe0001f. (BRK_INSN_MASK): Define to 0xd4200000. (aarch64_program_breakpoint_here_p): New function. (aarch64_gdbarch_init): Set gdbarch_program_breakpoint_here_p hook. * arch-utils.c (default_program_breakpoint_here_p): Moved from breakpoint.c. * arch-utils.h (default_program_breakpoint_here_p): Moved from breakpoint.h * breakpoint.c (bp_loc_is_permanent): Changed return type to bool and call gdbarch_program_breakpoint_here_p. (program_breakpoint_here): Moved to arch-utils.c, renamed to default_program_breakpoint_here_p, changed return type to bool and simplified. * breakpoint.h (program_breakpoint_here): Moved prototype to arch-utils.h, renamed to default_program_breakpoint_here_p and changed return type to bool. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (program_breakpoint_here_p): New method. * infrun.c (handle_signal_stop): Call gdbarch_program_breakpoint_here_p.	2020-01-29 11:25:10 -03:00
Simon Marchi	6c2659886f	gdb: add back declarations for _initialize functions ... I'd like to enable the -Wmissing-declarations warning. However, it warns for every _initialize function, for example: CXX dcache.o /home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’: /home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations] _initialize_dcache (void) ^~~~~~~~~~~~~~~~~~ The only practical way forward I found is to add back the declarations, which were removed by this commit: commit 481695ed5f Author: John Baldwin <jhb@FreeBSD.org> Date: Sat Sep 9 11:02:37 2017 -0700 Remove unnecessary function prototypes. I don't think it's a big problem to have the declarations for these functions, but if anybody has a better solution for this, I'll be happy to use it. gdb/ChangeLog: * aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration. * aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration. * aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration. * aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration. * aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration. * aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration. * ada-exp.y (_initialize_ada_exp): Add declaration. * ada-lang.c (_initialize_ada_language): Add declaration. * ada-tasks.c (_initialize_tasks): Add declaration. * agent.c (_initialize_agent): Add declaration. * aix-thread.c (_initialize_aix_thread): Add declaration. * alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration. * alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration. * alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration. * alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration. * alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration. * alpha-tdep.c (_initialize_alpha_tdep): Add declaration. * amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration. * amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration. * amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration. * amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration. * amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration. * amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration. * amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration. * amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration. * amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration. * amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration. * amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration. * amd64-tdep.c (_initialize_amd64_tdep): Add declaration. * amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration. * amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration. * annotate.c (_initialize_annotate): Add declaration. * arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration. * arc-tdep.c (_initialize_arc_tdep): Add declaration. * arch-utils.c (_initialize_gdbarch_utils): Add declaration. * arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration. * arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration. * arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration. * arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration. * arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration. * arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration. * arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration. * arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration. * arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration. * arm-tdep.c (_initialize_arm_tdep): Add declaration. * arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration. * auto-load.c (_initialize_auto_load): Add declaration. * auxv.c (_initialize_auxv): Add declaration. * avr-tdep.c (_initialize_avr_tdep): Add declaration. * ax-gdb.c (_initialize_ax_gdb): Add declaration. * bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration. * bfin-tdep.c (_initialize_bfin_tdep): Add declaration. * break-catch-sig.c (_initialize_break_catch_sig): Add declaration. * break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration. * break-catch-throw.c (_initialize_break_catch_throw): Add declaration. * breakpoint.c (_initialize_breakpoint): Add declaration. * bsd-uthread.c (_initialize_bsd_uthread): Add declaration. * btrace.c (_initialize_btrace): Add declaration. * charset.c (_initialize_charset): Add declaration. * cli/cli-cmds.c (_initialize_cli_cmds): Add declaration. * cli/cli-dump.c (_initialize_cli_dump): Add declaration. * cli/cli-interp.c (_initialize_cli_interp): Add declaration. * cli/cli-logging.c (_initialize_cli_logging): Add declaration. * cli/cli-script.c (_initialize_cli_script): Add declaration. * cli/cli-style.c (_initialize_cli_style): Add declaration. * coff-pe-read.c (_initialize_coff_pe_read): Add declaration. * coffread.c (_initialize_coffread): Add declaration. * compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration. * compile/compile.c (_initialize_compile): Add declaration. * complaints.c (_initialize_complaints): Add declaration. * completer.c (_initialize_completer): Add declaration. * copying.c (_initialize_copying): Add declaration. * corefile.c (_initialize_core): Add declaration. * corelow.c (_initialize_corelow): Add declaration. * cp-abi.c (_initialize_cp_abi): Add declaration. * cp-namespace.c (_initialize_cp_namespace): Add declaration. * cp-support.c (_initialize_cp_support): Add declaration. * cp-valprint.c (_initialize_cp_valprint): Add declaration. * cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration. * cris-tdep.c (_initialize_cris_tdep): Add declaration. * csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration. * csky-tdep.c (_initialize_csky_tdep): Add declaration. * ctfread.c (_initialize_ctfread): Add declaration. * d-lang.c (_initialize_d_language): Add declaration. * darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration. * darwin-nat.c (_initialize_darwin_nat): Add declaration. * dbxread.c (_initialize_dbxread): Add declaration. * dcache.c (_initialize_dcache): Add declaration. * disasm-selftests.c (_initialize_disasm_selftests): Add declaration. * disasm.c (_initialize_disasm): Add declaration. * dtrace-probe.c (_initialize_dtrace_probe): Add declaration. * dummy-frame.c (_initialize_dummy_frame): Add declaration. * dwarf-index-cache.c (_initialize_index_cache): Add declaration. * dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration. * dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration. * dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration. * dwarf2expr.c (_initialize_dwarf2expr): Add declaration. * dwarf2loc.c (_initialize_dwarf2loc): Add declaration. * dwarf2read.c (_initialize_dwarf2_read): Add declaration. * elfread.c (_initialize_elfread): Add declaration. * exec.c (_initialize_exec): Add declaration. * extension.c (_initialize_extension): Add declaration. * f-lang.c (_initialize_f_language): Add declaration. * f-valprint.c (_initialize_f_valprint): Add declaration. * fbsd-nat.c (_initialize_fbsd_nat): Add declaration. * fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration. * filesystem.c (_initialize_filesystem): Add declaration. * findcmd.c (_initialize_mem_search): Add declaration. * findvar.c (_initialize_findvar): Add declaration. * fork-child.c (_initialize_fork_child): Add declaration. * frame-base.c (_initialize_frame_base): Add declaration. * frame-unwind.c (_initialize_frame_unwind): Add declaration. * frame.c (_initialize_frame): Add declaration. * frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration. * frv-tdep.c (_initialize_frv_tdep): Add declaration. * ft32-tdep.c (_initialize_ft32_tdep): Add declaration. * gcore.c (_initialize_gcore): Add declaration. * gdb-demangle.c (_initialize_gdb_demangle): Add declaration. * gdb_bfd.c (_initialize_gdb_bfd): Add declaration. * gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration. * gdbarch.c (_initialize_gdbarch): Add declaration. * gdbtypes.c (_initialize_gdbtypes): Add declaration. * gnu-nat.c (_initialize_gnu_nat): Add declaration. * gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration. * gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration. * go-lang.c (_initialize_go_language): Add declaration. * go32-nat.c (_initialize_go32_nat): Add declaration. * guile/guile.c (_initialize_guile): Add declaration. * h8300-tdep.c (_initialize_h8300_tdep): Add declaration. * hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration. * hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration. * hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration. * hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration. * hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration. * hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration. * hppa-tdep.c (_initialize_hppa_tdep): Add declaration. * i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration. * i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration. * i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration. * i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration. * i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration. * i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration. * i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration. * i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration. * i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration. * i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration. * i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration. * i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration. * i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration. * i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration. * i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration. * i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration. * i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration. * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration. * i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration. * i386-tdep.c (_initialize_i386_tdep): Add declaration. * i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration. * ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration. * ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration. * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration. * ia64-tdep.c (_initialize_ia64_tdep): Add declaration. * ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration. * infcall.c (_initialize_infcall): Add declaration. * infcmd.c (_initialize_infcmd): Add declaration. * inflow.c (_initialize_inflow): Add declaration. * infrun.c (_initialize_infrun): Add declaration. * interps.c (_initialize_interpreter): Add declaration. * iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration. * jit.c (_initialize_jit): Add declaration. * language.c (_initialize_language): Add declaration. * linux-fork.c (_initialize_linux_fork): Add declaration. * linux-nat.c (_initialize_linux_nat): Add declaration. * linux-tdep.c (_initialize_linux_tdep): Add declaration. * linux-thread-db.c (_initialize_thread_db): Add declaration. * lm32-tdep.c (_initialize_lm32_tdep): Add declaration. * m2-lang.c (_initialize_m2_language): Add declaration. * m32c-tdep.c (_initialize_m32c_tdep): Add declaration. * m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration. * m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration. * m32r-tdep.c (_initialize_m32r_tdep): Add declaration. * m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration. * m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration. * m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration. * m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration. * m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration. * m68k-tdep.c (_initialize_m68k_tdep): Add declaration. * machoread.c (_initialize_machoread): Add declaration. * macrocmd.c (_initialize_macrocmd): Add declaration. * macroscope.c (_initialize_macroscope): Add declaration. * maint-test-options.c (_initialize_maint_test_options): Add declaration. * maint-test-settings.c (_initialize_maint_test_settings): Add declaration. * maint.c (_initialize_maint_cmds): Add declaration. * mdebugread.c (_initialize_mdebugread): Add declaration. * memattr.c (_initialize_mem): Add declaration. * mep-tdep.c (_initialize_mep_tdep): Add declaration. * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration. * mi/mi-cmds.c (_initialize_mi_cmds): Add declaration. * mi/mi-interp.c (_initialize_mi_interp): Add declaration. * mi/mi-main.c (_initialize_mi_main): Add declaration. * microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration. * microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration. * mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration. * mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration. * mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration. * mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration. * mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration. * mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration. * mips-tdep.c (_initialize_mips_tdep): Add declaration. * mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration. * mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration. * mipsread.c (_initialize_mipsread): Add declaration. * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration. * mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration. * moxie-tdep.c (_initialize_moxie_tdep): Add declaration. * msp430-tdep.c (_initialize_msp430_tdep): Add declaration. * nds32-tdep.c (_initialize_nds32_tdep): Add declaration. * nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration. * nios2-tdep.c (_initialize_nios2_tdep): Add declaration. * nto-procfs.c (_initialize_procfs): Add declaration. * objc-lang.c (_initialize_objc_language): Add declaration. * observable.c (_initialize_observer): Add declaration. * opencl-lang.c (_initialize_opencl_language): Add declaration. * or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration. * or1k-tdep.c (_initialize_or1k_tdep): Add declaration. * osabi.c (_initialize_gdb_osabi): Add declaration. * osdata.c (_initialize_osdata): Add declaration. * p-valprint.c (_initialize_pascal_valprint): Add declaration. * parse.c (_initialize_parse): Add declaration. * ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration. * ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration. * ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration. * ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration. * ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration. * ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration. * ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration. * ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration. * printcmd.c (_initialize_printcmd): Add declaration. * probe.c (_initialize_probe): Add declaration. * proc-api.c (_initialize_proc_api): Add declaration. * proc-events.c (_initialize_proc_events): Add declaration. * proc-service.c (_initialize_proc_service): Add declaration. * procfs.c (_initialize_procfs): Add declaration. * producer.c (_initialize_producer): Add declaration. * psymtab.c (_initialize_psymtab): Add declaration. * python/python.c (_initialize_python): Add declaration. * ravenscar-thread.c (_initialize_ravenscar): Add declaration. * record-btrace.c (_initialize_record_btrace): Add declaration. * record-full.c (_initialize_record_full): Add declaration. * record.c (_initialize_record): Add declaration. * regcache-dump.c (_initialize_regcache_dump): Add declaration. * regcache.c (_initialize_regcache): Add declaration. * reggroups.c (_initialize_reggroup): Add declaration. * remote-notif.c (_initialize_notif): Add declaration. * remote-sim.c (_initialize_remote_sim): Add declaration. * remote.c (_initialize_remote): Add declaration. * reverse.c (_initialize_reverse): Add declaration. * riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration. * riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration. * riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration. * riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration. * riscv-tdep.c (_initialize_riscv_tdep): Add declaration. * rl78-tdep.c (_initialize_rl78_tdep): Add declaration. * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration. * rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep): Add declaration. * rs6000-nat.c (_initialize_rs6000_nat): Add declaration. * rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration. * run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration. * rust-exp.y (_initialize_rust_exp): Add declaration. * rx-tdep.c (_initialize_rx_tdep): Add declaration. * s12z-tdep.c (_initialize_s12z_tdep): Add declaration. * s390-linux-nat.c (_initialize_s390_nat): Add declaration. * s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration. * s390-tdep.c (_initialize_s390_tdep): Add declaration. * score-tdep.c (_initialize_score_tdep): Add declaration. * ser-go32.c (_initialize_ser_dos): Add declaration. * ser-mingw.c (_initialize_ser_windows): Add declaration. * ser-pipe.c (_initialize_ser_pipe): Add declaration. * ser-tcp.c (_initialize_ser_tcp): Add declaration. * ser-uds.c (_initialize_ser_socket): Add declaration. * ser-unix.c (_initialize_ser_hardwire): Add declaration. * serial.c (_initialize_serial): Add declaration. * sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration. * sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration. * sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration. * sh-tdep.c (_initialize_sh_tdep): Add declaration. * skip.c (_initialize_step_skip): Add declaration. * sol-thread.c (_initialize_sol_thread): Add declaration. * solib-aix.c (_initialize_solib_aix): Add declaration. * solib-darwin.c (_initialize_darwin_solib): Add declaration. * solib-dsbt.c (_initialize_dsbt_solib): Add declaration. * solib-frv.c (_initialize_frv_solib): Add declaration. * solib-svr4.c (_initialize_svr4_solib): Add declaration. * solib-target.c (_initialize_solib_target): Add declaration. * solib.c (_initialize_solib): Add declaration. * source-cache.c (_initialize_source_cache): Add declaration. * source.c (_initialize_source): Add declaration. * sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration. * sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration. * sparc-nat.c (_initialize_sparc_nat): Add declaration. * sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration. * sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration. * sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration. * sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration. * sparc-tdep.c (_initialize_sparc_tdep): Add declaration. * sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration. * sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration. * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration. * sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration. * sparc64-nat.c (_initialize_sparc64_nat): Add declaration. * sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration. * sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration. * sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration. * sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration. * sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration. * sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration. * stabsread.c (_initialize_stabsread): Add declaration. * stack.c (_initialize_stack): Add declaration. * stap-probe.c (_initialize_stap_probe): Add declaration. * std-regs.c (_initialize_frame_reg): Add declaration. * symfile-debug.c (_initialize_symfile_debug): Add declaration. * symfile-mem.c (_initialize_symfile_mem): Add declaration. * symfile.c (_initialize_symfile): Add declaration. * symmisc.c (_initialize_symmisc): Add declaration. * symtab.c (_initialize_symtab): Add declaration. * target.c (_initialize_target): Add declaration. * target-connection.c (_initialize_target_connection): Add declaration. * target-dcache.c (_initialize_target_dcache): Add declaration. * target-descriptions.c (_initialize_target_descriptions): Add declaration. * thread.c (_initialize_thread): Add declaration. * tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration. * tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration. * tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration. * tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration. * tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration. * tracectf.c (_initialize_ctf): Add declaration. * tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration. * tracefile.c (_initialize_tracefile): Add declaration. * tracepoint.c (_initialize_tracepoint): Add declaration. * tui/tui-hooks.c (_initialize_tui_hooks): Add declaration. * tui/tui-interp.c (_initialize_tui_interp): Add declaration. * tui/tui-layout.c (_initialize_tui_layout): Add declaration. * tui/tui-regs.c (_initialize_tui_regs): Add declaration. * tui/tui-stack.c (_initialize_tui_stack): Add declaration. * tui/tui-win.c (_initialize_tui_win): Add declaration. * tui/tui.c (_initialize_tui): Add declaration. * typeprint.c (_initialize_typeprint): Add declaration. * ui-style.c (_initialize_ui_style): Add declaration. * unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration. * unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration. * unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration. * unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration. * unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration. * unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration. * unittests/filtered_iterator-selftests.c (_initialize_filtered_iterator_selftests): Add declaration. * unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration. * unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration. * unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration. * unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration. * unittests/main-thread-selftests.c (_initialize_main_thread_selftests): Add declaration. * unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration. * unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration. * unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration. * unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration. * unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration. * unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration. * unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration. * unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration. * unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration. * unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration. * unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration. * unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration. * unittests/style-selftests.c (_initialize_style_selftest): Add declaration. * unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration. * unittests/tui-selftests.c (_initialize_tui_selftest): Add declaration. * unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration. * unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration. * unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration. * unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration. * user-regs.c (_initialize_user_regs): Add declaration. * utils.c (_initialize_utils): Add declaration. * v850-tdep.c (_initialize_v850_tdep): Add declaration. * valops.c (_initialize_valops): Add declaration. * valprint.c (_initialize_valprint): Add declaration. * value.c (_initialize_values): Add declaration. * varobj.c (_initialize_varobj): Add declaration. * vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration. * vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration. * vax-tdep.c (_initialize_vax_tdep): Add declaration. * windows-nat.c (_initialize_windows_nat): Add declaration. (_initialize_check_for_gdb_ini): Add declaration. (_initialize_loadable): Add declaration. * windows-tdep.c (_initialize_windows_tdep): Add declaration. * x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration. * x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration. * xcoffread.c (_initialize_xcoffread): Add declaration. * xml-support.c (_initialize_xml_support): Add declaration. * xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration. * xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration. * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration. * xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration. Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9	2020-01-13 14:01:38 -05:00
Joel Brobecker	b811d2c292	Update copyright year range in all GDB files. ... gdb/ChangeLog: Update copyright year range in all GDB files.	2020-01-01 10:20:53 +04:00
Tankut Baris Aktemur	9d084466d7	infcall, c++: allow more info to be computed for pass-by-reference values ... In C++, call-by-value arguments that cannot be trivially copied are implicitly passed by reference. When making an infcall, GDB needs to find out if an argument is pass-by-reference or not, so that the correct semantics can be followed. This patch enriches the information computed by the language ops for pass-by-reference arguments. Instead of a plain binary result, the computed information now includes whether the argument is - copy constructible - destructible - trivially copyable - trivially copy constructible - trivially destructible This information is stored in a struct named 'language_pass_by_ref_info'. This patch paves the way for GDB's infcall mechanism to call the copy ctor and the destructor of a pass-by-ref argument appropriately. gdb/ChangeLog: 2019-12-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * language.h (struct language_pass_by_ref_info): New struct. (struct language_defn)<la_pass_by_reference>: Change the signature to return a language_pass_by_ref_info instead of an int. (language_pass_by_reference): Ditto. (default_pass_by_reference): Ditto. Adjust the users listed below. * arch-utils.c (default_return_in_first_hidden_param_p): Update. * cp-abi.c (cp_pass_by_reference): Update. * cp-abi.h (cp_pass_by_reference): Update declaration. (struct cp_abi_ops)<pass_by_reference>: Update. * gnu-v3-abi.c (gnuv3_pass_by_reference): Update. * infcall.c (call_function_by_hand_dummy): Update. * language.c (language_pass_by_reference): Update. (default_pass_by_reference): Update. * tic6x-tdep.c (tic6x_return_value): Update. Change-Id: Ib1c1f87f2490a5737c469f7b7185ddc7f6a164cb	2019-12-20 17:43:06 +01:00
Tom de Vries	85102364b2	[gdb] Fix more typos in comments ... Fix typos in comments. NFC. Tested on x86_64-linux. gdb/ChangeLog: 2019-10-18 Tom de Vries <tdevries@suse.de> * aarch64-tdep.c: Fix typos in comments. * ada-lang.c: Same. * ada-tasks.c: Same. * alpha-tdep.c: Same. * alpha-tdep.h: Same. * amd64-nat.c: Same. * amd64-windows-tdep.c: Same. * arc-tdep.c: Same. * arc-tdep.h: Same. * arch-utils.c: Same. * arm-nbsd-tdep.c: Same. * arm-tdep.c: Same. * ax-gdb.c: Same. * blockframe.c: Same. * btrace.c: Same. * c-varobj.c: Same. * coff-pe-read.c: Same. * coffread.c: Same. * cris-tdep.c: Same. * darwin-nat.c: Same. * dbxread.c: Same. * dcache.c: Same. * disasm.c: Same. * dtrace-probe.c: Same. * dwarf-index-write.c: Same. * dwarf2-frame-tailcall.c: Same. * dwarf2-frame.c: Same. * dwarf2read.c: Same. * eval.c: Same. * exceptions.c: Same. * fbsd-tdep.c: Same. * findvar.c: Same. * frame.c: Same. * frv-tdep.c: Same. * gnu-v3-abi.c: Same. * go32-nat.c: Same. * h8300-tdep.c: Same. * hppa-tdep.c: Same. * i386-linux-tdep.c: Same. * i386-tdep.c: Same. * ia64-libunwind-tdep.c: Same. * ia64-tdep.c: Same. * infcmd.c: Same. * infrun.c: Same. * linespec.c: Same. * linux-nat.c: Same. * linux-thread-db.c: Same. * machoread.c: Same. * mdebugread.c: Same. * mep-tdep.c: Same. * mn10300-tdep.c: Same. * namespace.c: Same. * objfiles.c: Same. * opencl-lang.c: Same. * or1k-tdep.c: Same. * osabi.c: Same. * ppc-linux-nat.c: Same. * ppc-linux-tdep.c: Same. * ppc-sysv-tdep.c: Same. * printcmd.c: Same. * procfs.c: Same. * record-btrace.c: Same. * record-full.c: Same. * remote-fileio.c: Same. * remote.c: Same. * rs6000-tdep.c: Same. * s12z-tdep.c: Same. * score-tdep.c: Same. * ser-base.c: Same. * ser-go32.c: Same. * skip.c: Same. * sol-thread.c: Same. * solib-svr4.c: Same. * solib.c: Same. * source.c: Same. * sparc-nat.c: Same. * sparc-sol2-tdep.c: Same. * sparc-tdep.c: Same. * sparc64-tdep.c: Same. * stabsread.c: Same. * stack.c: Same. * symfile.c: Same. * symtab.c: Same. * target-descriptions.c: Same. * target-float.c: Same. * thread.c: Same. * utils.c: Same. * valops.c: Same. * valprint.c: Same. * value.c: Same. * varobj.c: Same. * windows-nat.c: Same. * xcoffread.c: Same. * xstormy16-tdep.c: Same. * xtensa-tdep.c: Same. Change-Id: I5175f1b107bfa4e1cdd4a3361ccb4739e53c75c4	2019-10-18 02:48:08 +02:00
Tom Tromey	953cff5630	Change gcc_target_options to return std::string ... This patch was inspired by a recent review that recommended using std::string in a new implementation of the gcc_target_options gdbarch function. It changes this function to return std::string rather than an ordinary xmalloc'd string. I believe this caught a latent memory leak in compile.c:get_args. Tested on x86-64 Fedora 29. gdb/ChangeLog 2019-10-15 Tom Tromey <tromey@adacore.com> * gdbarch.h, gdbarch.c: Rebuild. * gdbarch.sh (gcc_target_options): Change return type to std::string. * compile/compile.c (get_args): Update. * nios2-tdep.c (nios2_gcc_target_options): Return std::string. * arm-linux-tdep.c (arm_linux_gcc_target_options): Return std::string. * aarch64-linux-tdep.c (aarch64_linux_gcc_target_options): Return std::string. * arch-utils.c (default_gcc_target_options): Return std::string. * arch-utils.h (default_gcc_target_options): Return std::string. * s390-tdep.c (s390_gcc_target_options): Return std::string. Change-Id: I51f61703426a323089e646da8f22320a2cafbc1f	2019-10-15 11:03:57 -06:00
Alan Hayward	aa7ca1bb44	Move [PAC] into a new MI field addr_flags ... Add a new print_pc which prints both the PC and a new field addr_flags. Call this wherever the PC is printed in stack.c. Add a new gdbarch method get_pc_address_flags to obtain the addr_flag contents. By default returns an empty string, on AArch64 this returns PAC if the address has been masked in the frame. Document this in the manual and NEWS file. gdb/ChangeLog: * NEWS (Other MI changes): New subsection. * aarch64-tdep.c (aarch64_get_pc_address_flags): New function. (aarch64_gdbarch_init): Add aarch64_get_pc_address_flags. * arch-utils.c (default_get_pc_address_flags): New function. * arch-utils.h (default_get_pc_address_flags): New declaration. * gdbarch.sh: Add get_pc_address_flags. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * stack.c (print_pc): New function. (print_frame_info) (print_frame): Call print_pc. gdb/doc/ChangeLog: * gdb.texinfo (AArch64 Pointer Authentication) (GDB/MI Breakpoint Information) (Frame Information): Document addr_field.	2019-08-16 10:19:18 +01:00
Tom Tromey	268a13a5a3	Rename common to gdbsupport ... This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.	2019-07-09 07:45:38 -06:00
Tom Tromey	230d2906b9	Rename gdb exception types ... This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update.	2019-04-08 09:05:40 -06:00
Tom Tromey	a70b814420	Rewrite TRY/CATCH ... This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling.	2019-04-08 09:05:39 -06:00
Tom Tromey	4de283e4b5	Revert the header-sorting patch ... Andreas Schwab and John Baldwin pointed out some bugs in the header sorting patch; and I noticed that the output was not correct when limited to a subset of files (a bug in my script). So, I'm reverting the patch. I may try again after fixing the issues pointed out. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> Revert the header-sorting patch. * ft32-tdep.c: Revert. * frv-tdep.c: Revert. * frv-linux-tdep.c: Revert. * frame.c: Revert. * frame-unwind.c: Revert. * frame-base.c: Revert. * fork-child.c: Revert. * findvar.c: Revert. * findcmd.c: Revert. * filesystem.c: Revert. * filename-seen-cache.h: Revert. * filename-seen-cache.c: Revert. * fbsd-tdep.c: Revert. * fbsd-nat.h: Revert. * fbsd-nat.c: Revert. * f-valprint.c: Revert. * f-typeprint.c: Revert. * f-lang.c: Revert. * extension.h: Revert. * extension.c: Revert. * extension-priv.h: Revert. * expprint.c: Revert. * exec.h: Revert. * exec.c: Revert. * exceptions.c: Revert. * event-top.c: Revert. * event-loop.c: Revert. * eval.c: Revert. * elfread.c: Revert. * dwarf2read.h: Revert. * dwarf2read.c: Revert. * dwarf2loc.c: Revert. * dwarf2expr.h: Revert. * dwarf2expr.c: Revert. * dwarf2-frame.c: Revert. * dwarf2-frame-tailcall.c: Revert. * dwarf-index-write.h: Revert. * dwarf-index-write.c: Revert. * dwarf-index-common.c: Revert. * dwarf-index-cache.h: Revert. * dwarf-index-cache.c: Revert. * dummy-frame.c: Revert. * dtrace-probe.c: Revert. * disasm.h: Revert. * disasm.c: Revert. * disasm-selftests.c: Revert. * dictionary.c: Revert. * dicos-tdep.c: Revert. * demangle.c: Revert. * dcache.h: Revert. * dcache.c: Revert. * darwin-nat.h: Revert. * darwin-nat.c: Revert. * darwin-nat-info.c: Revert. * d-valprint.c: Revert. * d-namespace.c: Revert. * d-lang.c: Revert. * ctf.c: Revert. * csky-tdep.c: Revert. * csky-linux-tdep.c: Revert. * cris-tdep.c: Revert. * cris-linux-tdep.c: Revert. * cp-valprint.c: Revert. * cp-support.c: Revert. * cp-namespace.c: Revert. * cp-abi.c: Revert. * corelow.c: Revert. * corefile.c: Revert. * continuations.c: Revert. * completer.h: Revert. * completer.c: Revert. * complaints.c: Revert. * coffread.c: Revert. * coff-pe-read.c: Revert. * cli-out.h: Revert. * cli-out.c: Revert. * charset.c: Revert. * c-varobj.c: Revert. * c-valprint.c: Revert. * c-typeprint.c: Revert. * c-lang.c: Revert. * buildsym.c: Revert. * buildsym-legacy.c: Revert. * build-id.h: Revert. * build-id.c: Revert. * btrace.c: Revert. * bsd-uthread.c: Revert. * breakpoint.h: Revert. * breakpoint.c: Revert. * break-catch-throw.c: Revert. * break-catch-syscall.c: Revert. * break-catch-sig.c: Revert. * blockframe.c: Revert. * block.c: Revert. * bfin-tdep.c: Revert. * bfin-linux-tdep.c: Revert. * bfd-target.c: Revert. * bcache.c: Revert. * ax-general.c: Revert. * ax-gdb.h: Revert. * ax-gdb.c: Revert. * avr-tdep.c: Revert. * auxv.c: Revert. * auto-load.c: Revert. * arm-wince-tdep.c: Revert. * arm-tdep.c: Revert. * arm-symbian-tdep.c: Revert. * arm-pikeos-tdep.c: Revert. * arm-obsd-tdep.c: Revert. * arm-nbsd-tdep.c: Revert. * arm-nbsd-nat.c: Revert. * arm-linux-tdep.c: Revert. * arm-linux-nat.c: Revert. * arm-fbsd-tdep.c: Revert. * arm-fbsd-nat.c: Revert. * arm-bsd-tdep.c: Revert. * arch-utils.c: Revert. * arc-tdep.c: Revert. * arc-newlib-tdep.c: Revert. * annotate.h: Revert. * annotate.c: Revert. * amd64-windows-tdep.c: Revert. * amd64-windows-nat.c: Revert. * amd64-tdep.c: Revert. * amd64-sol2-tdep.c: Revert. * amd64-obsd-tdep.c: Revert. * amd64-obsd-nat.c: Revert. * amd64-nbsd-tdep.c: Revert. * amd64-nbsd-nat.c: Revert. * amd64-nat.c: Revert. * amd64-linux-tdep.c: Revert. * amd64-linux-nat.c: Revert. * amd64-fbsd-tdep.c: Revert. * amd64-fbsd-nat.c: Revert. * amd64-dicos-tdep.c: Revert. * amd64-darwin-tdep.c: Revert. * amd64-bsd-nat.c: Revert. * alpha-tdep.c: Revert. * alpha-obsd-tdep.c: Revert. * alpha-nbsd-tdep.c: Revert. * alpha-mdebug-tdep.c: Revert. * alpha-linux-tdep.c: Revert. * alpha-linux-nat.c: Revert. * alpha-bsd-tdep.c: Revert. * alpha-bsd-nat.c: Revert. * aix-thread.c: Revert. * agent.c: Revert. * addrmap.c: Revert. * ada-varobj.c: Revert. * ada-valprint.c: Revert. * ada-typeprint.c: Revert. * ada-tasks.c: Revert. * ada-lang.c: Revert. * aarch64-tdep.c: Revert. * aarch64-ravenscar-thread.c: Revert. * aarch64-newlib-tdep.c: Revert. * aarch64-linux-tdep.c: Revert. * aarch64-linux-nat.c: Revert. * aarch64-fbsd-tdep.c: Revert. * aarch64-fbsd-nat.c: Revert. * aarch32-linux-nat.c: Revert.	2019-04-06 13:47:34 -06:00
Tom Tromey	d55e5aa6b2	Sort includes for files gdb/[a-f]*.[chyl]. ... This patch sorts the include files for the files [a-f]*.[chyl]. The patch was written by a script. Tested by the buildbot. I will follow up with patches to sort the remaining files, by sorting a subset, testing them, and then checking them in. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> * ft32-tdep.c: Sort headers. * frv-tdep.c: Sort headers. * frv-linux-tdep.c: Sort headers. * frame.c: Sort headers. * frame-unwind.c: Sort headers. * frame-base.c: Sort headers. * fork-child.c: Sort headers. * findvar.c: Sort headers. * findcmd.c: Sort headers. * filesystem.c: Sort headers. * filename-seen-cache.h: Sort headers. * filename-seen-cache.c: Sort headers. * fbsd-tdep.c: Sort headers. * fbsd-nat.h: Sort headers. * fbsd-nat.c: Sort headers. * f-valprint.c: Sort headers. * f-typeprint.c: Sort headers. * f-lang.c: Sort headers. * extension.h: Sort headers. * extension.c: Sort headers. * extension-priv.h: Sort headers. * expprint.c: Sort headers. * exec.h: Sort headers. * exec.c: Sort headers. * exceptions.c: Sort headers. * event-top.c: Sort headers. * event-loop.c: Sort headers. * eval.c: Sort headers. * elfread.c: Sort headers. * dwarf2read.h: Sort headers. * dwarf2read.c: Sort headers. * dwarf2loc.c: Sort headers. * dwarf2expr.h: Sort headers. * dwarf2expr.c: Sort headers. * dwarf2-frame.c: Sort headers. * dwarf2-frame-tailcall.c: Sort headers. * dwarf-index-write.h: Sort headers. * dwarf-index-write.c: Sort headers. * dwarf-index-common.c: Sort headers. * dwarf-index-cache.h: Sort headers. * dwarf-index-cache.c: Sort headers. * dummy-frame.c: Sort headers. * dtrace-probe.c: Sort headers. * disasm.h: Sort headers. * disasm.c: Sort headers. * disasm-selftests.c: Sort headers. * dictionary.c: Sort headers. * dicos-tdep.c: Sort headers. * demangle.c: Sort headers. * dcache.h: Sort headers. * dcache.c: Sort headers. * darwin-nat.h: Sort headers. * darwin-nat.c: Sort headers. * darwin-nat-info.c: Sort headers. * d-valprint.c: Sort headers. * d-namespace.c: Sort headers. * d-lang.c: Sort headers. * ctf.c: Sort headers. * csky-tdep.c: Sort headers. * csky-linux-tdep.c: Sort headers. * cris-tdep.c: Sort headers. * cris-linux-tdep.c: Sort headers. * cp-valprint.c: Sort headers. * cp-support.c: Sort headers. * cp-namespace.c: Sort headers. * cp-abi.c: Sort headers. * corelow.c: Sort headers. * corefile.c: Sort headers. * continuations.c: Sort headers. * completer.h: Sort headers. * completer.c: Sort headers. * complaints.c: Sort headers. * coffread.c: Sort headers. * coff-pe-read.c: Sort headers. * cli-out.h: Sort headers. * cli-out.c: Sort headers. * charset.c: Sort headers. * c-varobj.c: Sort headers. * c-valprint.c: Sort headers. * c-typeprint.c: Sort headers. * c-lang.c: Sort headers. * buildsym.c: Sort headers. * buildsym-legacy.c: Sort headers. * build-id.h: Sort headers. * build-id.c: Sort headers. * btrace.c: Sort headers. * bsd-uthread.c: Sort headers. * breakpoint.h: Sort headers. * breakpoint.c: Sort headers. * break-catch-throw.c: Sort headers. * break-catch-syscall.c: Sort headers. * break-catch-sig.c: Sort headers. * blockframe.c: Sort headers. * block.c: Sort headers. * bfin-tdep.c: Sort headers. * bfin-linux-tdep.c: Sort headers. * bfd-target.c: Sort headers. * bcache.c: Sort headers. * ax-general.c: Sort headers. * ax-gdb.h: Sort headers. * ax-gdb.c: Sort headers. * avr-tdep.c: Sort headers. * auxv.c: Sort headers. * auto-load.c: Sort headers. * arm-wince-tdep.c: Sort headers. * arm-tdep.c: Sort headers. * arm-symbian-tdep.c: Sort headers. * arm-pikeos-tdep.c: Sort headers. * arm-obsd-tdep.c: Sort headers. * arm-nbsd-tdep.c: Sort headers. * arm-nbsd-nat.c: Sort headers. * arm-linux-tdep.c: Sort headers. * arm-linux-nat.c: Sort headers. * arm-fbsd-tdep.c: Sort headers. * arm-fbsd-nat.c: Sort headers. * arm-bsd-tdep.c: Sort headers. * arch-utils.c: Sort headers. * arc-tdep.c: Sort headers. * arc-newlib-tdep.c: Sort headers. * annotate.h: Sort headers. * annotate.c: Sort headers. * amd64-windows-tdep.c: Sort headers. * amd64-windows-nat.c: Sort headers. * amd64-tdep.c: Sort headers. * amd64-sol2-tdep.c: Sort headers. * amd64-obsd-tdep.c: Sort headers. * amd64-obsd-nat.c: Sort headers. * amd64-nbsd-tdep.c: Sort headers. * amd64-nbsd-nat.c: Sort headers. * amd64-nat.c: Sort headers. * amd64-linux-tdep.c: Sort headers. * amd64-linux-nat.c: Sort headers. * amd64-fbsd-tdep.c: Sort headers. * amd64-fbsd-nat.c: Sort headers. * amd64-dicos-tdep.c: Sort headers. * amd64-darwin-tdep.c: Sort headers. * amd64-bsd-nat.c: Sort headers. * alpha-tdep.c: Sort headers. * alpha-obsd-tdep.c: Sort headers. * alpha-nbsd-tdep.c: Sort headers. * alpha-mdebug-tdep.c: Sort headers. * alpha-linux-tdep.c: Sort headers. * alpha-linux-nat.c: Sort headers. * alpha-bsd-tdep.c: Sort headers. * alpha-bsd-nat.c: Sort headers. * aix-thread.c: Sort headers. * agent.c: Sort headers. * addrmap.c: Sort headers. * ada-varobj.c: Sort headers. * ada-valprint.c: Sort headers. * ada-typeprint.c: Sort headers. * ada-tasks.c: Sort headers. * ada-lang.c: Sort headers. * aarch64-tdep.c: Sort headers. * aarch64-ravenscar-thread.c: Sort headers. * aarch64-newlib-tdep.c: Sort headers. * aarch64-linux-tdep.c: Sort headers. * aarch64-linux-nat.c: Sort headers. * aarch64-fbsd-tdep.c: Sort headers. * aarch64-fbsd-nat.c: Sort headers. * aarch32-linux-nat.c: Sort headers.	2019-04-05 19:09:35 -06:00
Andrew Burgess	5561fc304f	gdb: Restructure type_align and gdbarch_type_align ... This commit restructures the relationship between the type_align function and the gdbarch_type_align method. The problem being addressed with this commit is this; previously the type_align function was structured so that for "basic" types (int, float, etc) the gdbarch_type_align hook was called, which for "compound" types (arrays, structs, etc) the common type_align code has a fixed method for how to extract a "basic" type and would then call itself on that "basic" type. The problem is that if an architecture wants to modify the alignment rules for a "compound" type then this is not currently possible. In the revised structure, all types pass through the gdbarch_type_align method. If this method returns 0 then this indicates that the architecture has no special rules for this type, and GDB should apply the default rules for alignment. However, the architecture is free to provide an alignment for any type, both "basic" and "compound". After this commit the default alignment rules now all live in the type_align function, the default_type_align only ever returns 0, meaning apply the default rules. I've updated the 3 targets (arc, i386, and nios2) that already override the gdbarch_type_align method to fit the new scheme. Tested on X86-64/GNU Linux with no regressions. gdb/ChangeLog: * arc-tdep.c (arc_type_align): Provide alignment for basic types, return 0 for other types. * arch-utils.c (default_type_align): Always return 0. * gdbarch.h: Regenerate. * gdbarch.sh (type_align): Extend comment. * gdbtypes.c (type_align): Add additional comments, always call gdbarch_type_align before applying the default rules. * i386-tdep.c (i386_type_align): Return 0 as the default rule, generic code will then apply a suitable default. * nios2-tdep.c (nios2_type_align): Provide alignment for basic types, return 0 for other types.	2019-02-27 10:38:15 +02:00
Tom Tromey	0747795c08	Normalize includes to use common/ ... This changes all includes to use the form "common/filename.h" rather than just "filename.h". This was written by a script. gdb/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * xtensa-linux-nat.c: Fix common/ includes. * xml-support.h: Fix common/ includes. * xml-support.c: Fix common/ includes. * x86-linux-nat.c: Fix common/ includes. * windows-nat.c: Fix common/ includes. * varobj.h: Fix common/ includes. * varobj.c: Fix common/ includes. * value.c: Fix common/ includes. * valops.c: Fix common/ includes. * utils.c: Fix common/ includes. * unittests/xml-utils-selftests.c: Fix common/ includes. * unittests/utils-selftests.c: Fix common/ includes. * unittests/unpack-selftests.c: Fix common/ includes. * unittests/tracepoint-selftests.c: Fix common/ includes. * unittests/style-selftests.c: Fix common/ includes. * unittests/string_view-selftests.c: Fix common/ includes. * unittests/scoped_restore-selftests.c: Fix common/ includes. * unittests/scoped_mmap-selftests.c: Fix common/ includes. * unittests/scoped_fd-selftests.c: Fix common/ includes. * unittests/rsp-low-selftests.c: Fix common/ includes. * unittests/parse-connection-spec-selftests.c: Fix common/ includes. * unittests/optional-selftests.c: Fix common/ includes. * unittests/offset-type-selftests.c: Fix common/ includes. * unittests/observable-selftests.c: Fix common/ includes. * unittests/mkdir-recursive-selftests.c: Fix common/ includes. * unittests/memrange-selftests.c: Fix common/ includes. * unittests/memory-map-selftests.c: Fix common/ includes. * unittests/lookup_name_info-selftests.c: Fix common/ includes. * unittests/function-view-selftests.c: Fix common/ includes. * unittests/environ-selftests.c: Fix common/ includes. * unittests/copy_bitwise-selftests.c: Fix common/ includes. * unittests/common-utils-selftests.c: Fix common/ includes. * unittests/cli-utils-selftests.c: Fix common/ includes. * unittests/array-view-selftests.c: Fix common/ includes. * ui-file.c: Fix common/ includes. * tui/tui-io.c: Fix common/ includes. * tracepoint.h: Fix common/ includes. * tracepoint.c: Fix common/ includes. * tracefile-tfile.c: Fix common/ includes. * top.h: Fix common/ includes. * top.c: Fix common/ includes. * thread.c: Fix common/ includes. * target/waitstatus.h: Fix common/ includes. * target/waitstatus.c: Fix common/ includes. * target.h: Fix common/ includes. * target.c: Fix common/ includes. * target-memory.c: Fix common/ includes. * target-descriptions.c: Fix common/ includes. * symtab.h: Fix common/ includes. * symfile.c: Fix common/ includes. * stap-probe.c: Fix common/ includes. * spu-linux-nat.c: Fix common/ includes. * sparc-nat.c: Fix common/ includes. * source.c: Fix common/ includes. * solib.c: Fix common/ includes. * solib-target.c: Fix common/ includes. * ser-unix.c: Fix common/ includes. * ser-tcp.c: Fix common/ includes. * ser-pipe.c: Fix common/ includes. * ser-base.c: Fix common/ includes. * selftest-arch.c: Fix common/ includes. * s12z-tdep.c: Fix common/ includes. * rust-exp.y: Fix common/ includes. * rs6000-aix-tdep.c: Fix common/ includes. * riscv-tdep.c: Fix common/ includes. * remote.c: Fix common/ includes. * remote-notif.h: Fix common/ includes. * remote-fileio.h: Fix common/ includes. * remote-fileio.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * record-btrace.c: Fix common/ includes. * python/python.c: Fix common/ includes. * python/py-type.c: Fix common/ includes. * python/py-inferior.c: Fix common/ includes. * progspace.h: Fix common/ includes. * producer.c: Fix common/ includes. * procfs.c: Fix common/ includes. * proc-api.c: Fix common/ includes. * printcmd.c: Fix common/ includes. * ppc-linux-nat.c: Fix common/ includes. * parser-defs.h: Fix common/ includes. * osdata.c: Fix common/ includes. * obsd-nat.c: Fix common/ includes. * nat/x86-linux.c: Fix common/ includes. * nat/x86-linux-dregs.c: Fix common/ includes. * nat/x86-dregs.h: Fix common/ includes. * nat/x86-dregs.c: Fix common/ includes. * nat/ppc-linux.c: Fix common/ includes. * nat/mips-linux-watch.h: Fix common/ includes. * nat/mips-linux-watch.c: Fix common/ includes. * nat/linux-waitpid.c: Fix common/ includes. * nat/linux-ptrace.h: Fix common/ includes. * nat/linux-ptrace.c: Fix common/ includes. * nat/linux-procfs.c: Fix common/ includes. * nat/linux-personality.c: Fix common/ includes. * nat/linux-osdata.c: Fix common/ includes. * nat/linux-namespaces.c: Fix common/ includes. * nat/linux-btrace.h: Fix common/ includes. * nat/linux-btrace.c: Fix common/ includes. * nat/fork-inferior.c: Fix common/ includes. * nat/amd64-linux-siginfo.c: Fix common/ includes. * nat/aarch64-sve-linux-ptrace.c: Fix common/ includes. * nat/aarch64-linux.c: Fix common/ includes. * nat/aarch64-linux-hw-point.h: Fix common/ includes. * nat/aarch64-linux-hw-point.c: Fix common/ includes. * namespace.h: Fix common/ includes. * mips-linux-tdep.c: Fix common/ includes. * minsyms.c: Fix common/ includes. * mi/mi-parse.h: Fix common/ includes. * mi/mi-main.c: Fix common/ includes. * mi/mi-cmd-env.c: Fix common/ includes. * memrange.h: Fix common/ includes. * memattr.c: Fix common/ includes. * maint.h: Fix common/ includes. * maint.c: Fix common/ includes. * main.c: Fix common/ includes. * machoread.c: Fix common/ includes. * location.c: Fix common/ includes. * linux-thread-db.c: Fix common/ includes. * linux-nat.c: Fix common/ includes. * linux-fork.c: Fix common/ includes. * inline-frame.c: Fix common/ includes. * infrun.c: Fix common/ includes. * inflow.c: Fix common/ includes. * inferior.h: Fix common/ includes. * inferior.c: Fix common/ includes. * infcmd.c: Fix common/ includes. * inf-ptrace.c: Fix common/ includes. * inf-child.c: Fix common/ includes. * ia64-linux-nat.c: Fix common/ includes. * i387-tdep.c: Fix common/ includes. * i386-tdep.c: Fix common/ includes. * i386-linux-tdep.c: Fix common/ includes. * i386-linux-nat.c: Fix common/ includes. * i386-go32-tdep.c: Fix common/ includes. * i386-fbsd-tdep.c: Fix common/ includes. * i386-fbsd-nat.c: Fix common/ includes. * guile/scm-type.c: Fix common/ includes. * guile/guile.c: Fix common/ includes. * go32-nat.c: Fix common/ includes. * gnu-nat.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbarch-selftests.c: Fix common/ includes. * gdb_usleep.c: Fix common/ includes. * gdb_select.h: Fix common/ includes. * gdb_bfd.c: Fix common/ includes. * gcore.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * findvar.c: Fix common/ includes. * fbsd-nat.c: Fix common/ includes. * event-top.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * dwarf2read.c: Fix common/ includes. * dwarf2loc.c: Fix common/ includes. * dwarf2-frame.c: Fix common/ includes. * dwarf-index-cache.c: Fix common/ includes. * dtrace-probe.c: Fix common/ includes. * disasm-selftests.c: Fix common/ includes. * defs.h: Fix common/ includes. * csky-tdep.c: Fix common/ includes. * cp-valprint.c: Fix common/ includes. * cp-support.h: Fix common/ includes. * cp-support.c: Fix common/ includes. * corelow.c: Fix common/ includes. * completer.h: Fix common/ includes. * completer.c: Fix common/ includes. * compile/compile.c: Fix common/ includes. * compile/compile-loc2c.c: Fix common/ includes. * compile/compile-cplus-types.c: Fix common/ includes. * compile/compile-cplus-symbols.c: Fix common/ includes. * command.h: Fix common/ includes. * cli/cli-dump.c: Fix common/ includes. * cli/cli-cmds.c: Fix common/ includes. * charset.c: Fix common/ includes. * build-id.c: Fix common/ includes. * btrace.h: Fix common/ includes. * btrace.c: Fix common/ includes. * breakpoint.h: Fix common/ includes. * breakpoint.c: Fix common/ includes. * ax.h: (enum agent_op): Fix common/ includes. * ax-general.c (struct aop_map): Fix common/ includes. * ax-gdb.c: Fix common/ includes. * auxv.c: Fix common/ includes. * auto-load.c: Fix common/ includes. * arm-tdep.c: Fix common/ includes. * arch/riscv.c: Fix common/ includes. * arch/ppc-linux-common.c: Fix common/ includes. * arch/i386.c: Fix common/ includes. * arch/arm.c: Fix common/ includes. * arch/arm-linux.c: Fix common/ includes. * arch/arm-get-next-pcs.c: Fix common/ includes. * arch/amd64.c: Fix common/ includes. * arch/aarch64.c: Fix common/ includes. * arch/aarch64-insn.c: Fix common/ includes. * arch-utils.c: Fix common/ includes. * amd64-windows-tdep.c: Fix common/ includes. * amd64-tdep.c: Fix common/ includes. * amd64-sol2-tdep.c: Fix common/ includes. * amd64-obsd-tdep.c: Fix common/ includes. * amd64-nbsd-tdep.c: Fix common/ includes. * amd64-linux-tdep.c: Fix common/ includes. * amd64-linux-nat.c: Fix common/ includes. * amd64-fbsd-tdep.c: Fix common/ includes. * amd64-fbsd-nat.c: Fix common/ includes. * amd64-dicos-tdep.c: Fix common/ includes. * amd64-darwin-tdep.c: Fix common/ includes. * agent.c: Fix common/ includes. * ada-lang.h: Fix common/ includes. * ada-lang.c: Fix common/ includes. * aarch64-tdep.c: Fix common/ includes. gdb/gdbserver/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * win32-low.c: Fix common/ includes. * win32-i386-low.c: Fix common/ includes. * tracepoint.c: Fix common/ includes. * thread-db.c: Fix common/ includes. * target.h: Fix common/ includes. * symbol.c: Fix common/ includes. * spu-low.c: Fix common/ includes. * server.h: Fix common/ includes. * server.c: Fix common/ includes. * remote-utils.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * nto-x86-low.c: Fix common/ includes. * notif.h: Fix common/ includes. * mem-break.h: Fix common/ includes. * lynx-low.c: Fix common/ includes. * lynx-i386-low.c: Fix common/ includes. * linux-x86-tdesc-selftest.c: Fix common/ includes. * linux-x86-low.c: Fix common/ includes. * linux-low.c: Fix common/ includes. * inferiors.h: Fix common/ includes. * i387-fp.c: Fix common/ includes. * hostio.c: Fix common/ includes. * hostio-errno.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbreplay.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * ax.c: (enum gdb_agent_op): Fix common/ includes.	2019-01-25 15:28:16 -07:00
Joel Brobecker	42a4f53d2b	Update copyright year range in all GDB files. ... This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.	2019-01-01 10:01:51 +04:00
Tom Tromey	da6580e59c	Do not use buildsym.h in some files ... A few files no longer need to include buildsym.h. gdb/ChangeLog 2018-07-20 Tom Tromey <tom@tromey.com> * arch-utils.c: Do not include buildsym.h. * mipsread.c: Do not include buildsym.h. * machoread.c: Do not include buildsym.h. * elfread.c: Do not include buildsym.h.	2018-07-20 09:42:51 -06:00
Simon Marchi	55c748a1c0	type alignment: Use type_length_units ... The type alignment value is returned in 8-bit-bytes instead of target memory addressable units. For example, on a target with 16-bit-bytes where sizeof(int) == 1 (one addressable unit), alignof(int) currently returns 2. After, this patch, it returns 1. gdb/ChangeLog: * arch-utils.c (default_type_align): Use type_length_units. * gdbtypes.c (type_align): Use type_length_units.	2018-06-14 18:24:55 -04:00
Maciej W. Rozycki	4b2dfa9d87	arch-utils: Make the last endianness actually chosen sticky ... Use the last endianness explicitly selected, either by choosing a binary file or with the `set endian' command, for future automatic selection. As observed with the `gdb.base/step-over-no-symbols.exp' test case when discarding the binary file even while connected to a live target the endianness automatically selected is reset to the GDB target's default, even if it does not match the endianness of the target being talked to. For example with a little-endian MIPS target and the default endianness being big we get this: (gdb) file .../gdb/testsuite/outputs/gdb.base/step-over-no-symbols/step-over-no-symbols Reading symbols from .../gdb/testsuite/outputs/gdb.base/step-over-no-symbols/step-over-no-symbols...done. (gdb) delete breakpoints (gdb) info breakpoints No breakpoints or watchpoints. (gdb) break main Breakpoint 1 at 0x400840: file .../gdb/testsuite/gdb.base/start.c, line 34. [...] (gdb) continue Continuing. Breakpoint 1, main () at .../gdb/testsuite/gdb.base/start.c:34 34 foo(); (gdb) delete breakpoints Delete all breakpoints? (y or n) y (gdb) info breakpoints No breakpoints or watchpoints. (gdb) file A program is being debugged already. Are you sure you want to change the file? (y or n) y No executable file now. Discard symbol table from `.../gdb/testsuite/outputs/gdb.base/step-over-no-symbols/step-over-no-symbols'? (y or n) y No symbol file now. (gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: purging symbols p /x $pc $1 = 0x40084000 (gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: get before PC break *$pc Breakpoint 2 at 0x40084000 (gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: break *$pc set displaced-stepping off (gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: set displaced-stepping off stepi Warning: Cannot insert breakpoint 2. Cannot access memory at address 0x40084000 Command aborted. (gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: stepi p /x $pc $2 = 0x40084000 (gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: get after PC FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: advanced Remote debugging from host ... monitor exit (gdb) Killing process(es): ... testcase .../gdb/testsuite/gdb.base/step-over-no-symbols.exp completed in 2 seconds which shows that with the removal of the executable debugged the endianness of $pc still at `main' gets swapped and the value in that register is now incorrectly interpreted as 0x40084000 rather than 0x400840 as shown earlier on with the `break' command. Consequently the debug session no longer works as expected, until the endianness is overridden with an explicit `set endian little' command. This will happen while working with any target hardware whose endianness does not match the default GDB target's endianness guessed and recorded for a later use in `initialize_current_architecture'. Given that within a single run of GDB it is more likely that consecutive target connections will use the same endianness than that the endianness will be swapped between connections, it makes sense to preserve the last endianness explicitly selected as the automatic default. It will make a session like above, where an executable is removed, work correctly and will retain the endianness for a further reconnection to the target. And the new automatic default will still be overridden by subsequently choosing a binary to debug, or with an explicit `set endian' command. With the change in place the test case above completes successfully: (gdb) continue Continuing. Breakpoint 1, main () at .../gdb/testsuite/gdb.base/start.c:34 34 foo(); (gdb) delete breakpoints Delete all breakpoints? (y or n) y (gdb) info breakpoints No breakpoints or watchpoints. (gdb) file A program is being debugged already. Are you sure you want to change the file? (y or n) y No executable file now. Discard symbol table from `.../gdb/testsuite/outputs/gdb.base/step-over-no-symbols/step-over-no-symbols'? (y or n) y No symbol file now. (gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: purging symbols p /x $pc warning: GDB can't find the start of the function at 0x400840. GDB is unable to find the start of the function at 0x400840 and thus can't determine the size of that function's stack frame. This means that GDB may be unable to access that stack frame, or the frames below it. This problem is most likely caused by an invalid program counter or stack pointer. However, if you think GDB should simply search farther back from 0x400840 for code which looks like the beginning of a function, you can increase the range of the search using the `set heuristic-fence-post' command. $1 = 0x400840 (gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: get before PC break *$pc Breakpoint 2 at 0x400840 (gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: break *$pc set displaced-stepping off (gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: set displaced-stepping off stepi warning: GDB can't find the start of the function at 0x4007f8. 0x004007f8 in ?? () (gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: stepi p /x $pc $2 = 0x4007f8 (gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: get after PC PASS: gdb.base/step-over-no-symbols.exp: displaced=off: advanced Remote debugging from host ... monitor exit (gdb) Killing process(es): ... testcase .../gdb/testsuite/gdb.base/step-over-no-symbols.exp completed in 2 seconds gdb/ * arch-utils.c (gdbarch_info_fill): Set `default_byte_order' to the endianness selected. * NEWS: Document `set endian auto' mode operation update. gdb/doc/ * gdb.texinfo (Choosing Target Byte Order): Document endianness selection details with the `set endian auto' mode. gdb/testsuite * gdb.base/endian.exp: New test. * gdb.base/endian.c: New test source.	2018-05-31 15:15:35 +01:00
Simon Marchi	73e1c03f93	Remove regcache_raw_supply ... Remove regcache_raw_supply, update callers to use detached_regcache::raw_supply. gdb/ChangeLog: * regcache.h (regcache_raw_supply): Remove, update callers to use detached_regcache::raw_supply. * regcache.c (regcache_raw_supply): Remove.	2018-05-30 14:54:45 -04:00
Tom Tromey	2b4424c35b	Add initial type alignment support ... This adds some basic type alignment support to gdb. It changes struct type to store the alignment, and updates dwarf2read.c to handle DW_AT_alignment. It also adds a new gdbarch method and updates i386-tdep.c. None of this new functionality is used anywhere yet, so tests will wait until the next patch. 2018-04-30 Tom Tromey <tom@tromey.com> * i386-tdep.c (i386_type_align): New function. (i386_gdbarch_init): Update. * gdbarch.sh (type_align): New method. * gdbarch.c, gdbarch.h: Rebuild. * arch-utils.h (default_type_align): Declare. * arch-utils.c (default_type_align): New function. * gdbtypes.h (TYPE_ALIGN_BITS): New define. (struct type) <align_log2>: New field. <instance_flags>: Now a bitfield. (TYPE_RAW_ALIGN): New macro. (type_align, type_raw_align, set_type_align): Declare. * gdbtypes.c (type_align, type_raw_align, set_type_align): New functions. * dwarf2read.c (quirk_rust_enum): Set type alignment. (get_alignment, maybe_set_alignment): New functions. (read_structure_type, read_enumeration_type, read_array_type) (read_set_type, read_tag_pointer_type, read_tag_reference_type) (read_subrange_type, read_base_type): Set type alignment.	2018-04-30 11:25:30 -06:00
Markus Metzger	1d509aa625	infrun: step through indirect branch thunks ... With version 7.3 GCC supports new options -mindirect-branch=<choice> -mfunction-return=<choice> The choices are: keep behaves as before thunk jumps through a thunk thunk-external jumps through an external thunk thunk-inline jumps through an inlined thunk For thunk and thunk-external, GDB would, on a call to the thunk, step into the thunk and then resume to its caller assuming that this is an undebuggable function. On a return thunk, GDB would stop inside the thunk. Make GDB step through such thunks instead. Before: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) 30 } After: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) inc (x=41) at gdb.base/step-indirect-call-thunk.c:23 23 return x + 1; This is independent of the step-mode. In order to step into the thunk, you would need to use stepi. When stepping over an indirect call thunk, GDB would first step through the thunk, then recognize that it stepped into a sub-routine and resume to the caller (of the thunk). Not sure whether this is worth optimizing. Thunk detection is implemented via gdbarch. I implemented the methods for IA. Other architectures may run into unexpected fails. The tests assume a fixed number of instruction steps to reach a thunk. This depends on the compiler as well as the architecture. They may need adjustments when we add support for more architectures. Or we can simply drop those tests that cover being able to step into thunks using instruction stepping. When using an older GCC, the tests will fail to build and will be reported as untested: Running .../gdb.base/step-indirect-call-thunk.exp ... gdb compile failed, \ gcc: error: unrecognized command line option '-mindirect-branch=thunk' gcc: error: unrecognized command line option '-mfunction-return=thunk' === gdb Summary === # of untested testcases 1 gdb/ * infrun.c (process_event_stop_test): Call gdbarch_in_indirect_branch_thunk. * gdbarch.sh (in_indirect_branch_thunk): New. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * x86-tdep.h: New. * x86-tdep.c: New. * Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o. (HFILES_NO_SRCDIR): Add x86-tdep.h. (ALLDEPFILES): Add x86-tdep.c. * arch-utils.h (default_in_indirect_branch_thunk): New. * arch-utils.c (default_in_indirect_branch_thunk): New. * i386-tdep: Include x86-tdep.h. (i386_in_indirect_branch_thunk): New. (i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch function. * amd64-tdep: Include x86-tdep.h. (amd64_in_indirect_branch_thunk): New. (amd64_init_abi): Set in_indirect_branch_thunk gdbarch function. testsuite/ * gdb.base/step-indirect-call-thunk.exp: New. * gdb.base/step-indirect-call-thunk.c: New. * gdb.reverse/step-indirect-call-thunk.exp: New. * gdb.reverse/step-indirect-call-thunk.c: New.	2018-04-13 10:44:47 +02:00
Simon Marchi	2654040249	Make "set osabi none" really work (PR 22980) ... I was looking for a way to reproduce easily PR 22979 by doing this: (gdb) set architecture i386:x86-64 (gdb) set osabi none However, I noticed that even though I did "set osabi none", the gdbarch gdb created was for Linux: (gdb) set debug arch 1 (gdb) set architecture i386:x86-64 ... (gdb) set osabi none gdbarch_find_by_info: info.bfd_arch_info i386:x86-64 gdbarch_find_by_info: info.byte_order 1 (little) gdbarch_find_by_info: info.osabi 4 (GNU/Linux) <--- Wrong? gdbarch_find_by_info: info.abfd 0x0 gdbarch_find_by_info: info.tdep_info 0x0 gdbarch_find_by_info: Previous architecture 0x1e6fd30 (i386:x86-64) selected gdbarch_update_p: Architecture 0x1e6fd30 (i386:x86-64) unchanged This is because the value GDB_OSABI_UNKNOWN has an unclear role, sometimes meaning "no osabi" and sometimes "please selected automatically". Doing "set osabi none" sets the requested osabi to GDB_OSABI_UNKNOWN, in which case gdbarch_info_fill overrides it with a value from the target description, or the built-in default osabi. This means that it's impossible to force GDB not to use an osabi with "set osabi". Since my GDB's built-in default osabi is Linux, it always falls back to GDB_OSABI_LINUX. To fix it, I introduced GDB_OSABI_NONE, which really means "I don't want any osabi". GDB_OSABI_UNKNOWN can then be used only for "not set yet, please auto-detect". GDB_OSABI_UNINITIALIZED now seems unnecessary since it overlaps with GDB_OSABI_UNKNOWN, so I think it can be removed and gdbarch_info::osabi can be initialized to GDB_OSABI_UNKNOWN. gdb/ChangeLog: PR gdb/22980 * defs.h (enum gdb_osabi): Remove GDB_OSABI_UNINITIALIZED, add GDB_OSABI_NONE. * arch-utils.c (gdbarch_info_init): Don't set info->osabi. * osabi.c (gdb_osabi_names): Add "unknown" entry. gdb/testsuite/ChangeLog: PR gdb/22980 * gdb.base/osabi.exp: New file.	2018-04-07 13:23:28 -04:00