When printing a DW_MACRO_define_strx entry in a .debug_macro.dwo section, we
run into:
...
DW_MACRO_define_strx lineno : 0 macro : <no .debug_str_offsets section>
...
Fix this in display_debug_macro by passing the correct dwo argument to a
fetch_indexed_string call.
That works fine for readelf -w, with with readelf -wm we have:
...
DW_MACRO_define_strx lineno : 0 macro : <no .debug_str_offsets.dwo section>
...
Fix this in display_debug_macro by doing load_debug_section_with_follow for
str_dwo / str_index_dwo sections instead of str / str_index sections when
handling .debug_macro.dwo.
PR 31735
When compiling a hello world with dwarf4 split dwarf:
...
$ gcc -gdwarf-4 -gsplit-dwarf hello.c -save-temps -dA
...
we have in a-hello.s these three initial entries in .debug_str_offsets:
...
.section .debug_str_offsets.dwo,"e",@progbits
.4byte 0 // indexed string 0x0: short int
.4byte 0xa // indexed string 0x1: /home/vries/binutils
.4byte 0x1f // indexed string 0x2: main
...
but "readelf -ws a.out" starts at the third entry:
...
Contents of the .debug_str_offsets.dwo section (loaded from a-hello.dwo):
Length: 0x30
Index Offset [String]
0 00000000 main
...
This is a regression since commit 407115429b ("Modified changes for
split-dwarf and dwarf-5."), which introduced a variable
debug_str_offsets_hdr_len in display_debug_str_offsets.
Fix this by setting display_debug_str_offsets to 0 for the dwarf4 case.
PR 31734
Given that the disassembler should never abort when decoding
(potentially random) data, assertion statements in the
`get_*reg_qualifier_from_value' function family prove problematic.
Consider the random 32-bit word W, encoded in a data segment and
encountered on execution of `objdump -D <obj_name>'.
If:
(W & ~opcode_mask) == valid instruction
Then before `print_insn_aarch64_word' has a chance to report the
instruction as potentially undefined, an attempt will be made to have
the qualifiers for the instruction's register operands (if any)
decoded. If the relevant bits do not map onto a valid qualifier for
the matched instruction-like word, an abort will be triggered and the
execution of objdump aborted.
As this scenario is perfectly feasible and, in light of the fact that
objdump must successfully decode all sections of a given object file,
it is not appropriate to assert in this family of functions.
Therefore, we add a new pseudo-qualifier `AARCH64_OPND_QLF_ERR' for
handling invalid qualifier-associated values and re-purpose the
assertion conditions in qualifier-retrieving functions to be the
predicate guarding the returning of the calculated qualifier type.
If the predicate fails, we return this new qualifier and allow the
caller to handle the error as appropriate.
As these functions are called either from within
`aarch64_extract_operand' or `do_special_decoding', both of which are
expected to return non-zero values, it suffices that callers return
zero upon encountering `AARCH64_OPND_QLF_ERR'.
Ar present the error presented in the hypothetical scenario has been
encountered in `get_sreg_qualifier_from_value', but the change is made
to the whole family to keep the interface consistent.
Bug: https://sourceware.org/PR31595
Since ar can be built defaulting to deterministic mode, tests which
expect non-deterministic behaviour need to explicitly set the U flag.
The non-deterministic member test expects SOURCE_DATE_EPOCH to not be
set; this documents that. Unconditionally unsetting the variable
causes issues in test infrastructure (which expects unsetenv to only
be called on variables which are already set).
Signed-off-by: Stephen Kitt <steve@sk2.org>
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
PR 31062
* objdump.c (decompressed_dumps): New local variable. (usage): Mention the -z/--decompress option. (long_options): Add --decompress. (dump_section_header): Add "COMPRESSED" to the Flags field of any compressed section. (dump_section): Warn users when dumping a compressed section. (display_any_bfd): Decompress the section if decompressed_dumps is true. (main): Handle the -z/--decompress option.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* testsuite/binutils-all/objdump.s: Update expected output.
* testsuite/binutils-all/objdump.exp: Add test of -Z -s.
* testsuite/binutils-all/objdump.Zs: New file.
* readelf.c (maybe_expand_or_relocate_section): New function. Contains common code found in dump functions. Adds a note message if a compressed section is not being decompressed. (dump_section_as_strings): Use new function. (dump_section_as_bytes): Likewise.
Add a 64-bit traditional MIPS dump variant for the `readelf -S bintest'
test from binutils-all/readelf.exp, using a filename suffix according to
the rules set there, removing:
FAIL: readelf -S bintest
regressions with `mips64-linux-gnuabi64', `mips64el-linux-gnuabi64',
`mips64-openbsd', and `mips64el-openbsd' targets, which default to the
n64 ABI and consequently produce a section layout that is different from
what the generic dump pattern covers.
Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
binutils/
* testsuite/binutils-all/readelf.s-64-tmips: New test variant.
PR 30699
* binutils/testsuite/binutils-all/objcopy.exp (keep_debug_symbols_for_elf_relocatable): Do not add sections containing the string "debug_" to the list of non-debug sections.
Make the n64 ABI the default for 64-bit Linux targets specified with
`-gnuabi64' suffix included in the target triplet, for configurations
such as the Debian mips64el and mips64r6el ports. Adjust testsuite
configuration accordingly.
There are the following regressions with the new target triplet:
mips64-linux-gnuabi64 +FAIL: readelf -S bintest
mips64-linux-gnuabi64 +FAIL: MIPS reloc estimation 1
mips64el-linux-gnuabi64 +FAIL: readelf -S bintest
mips64el-linux-gnuabi64 +FAIL: MIPS reloc estimation 1
The `readelf' issue comes from a difference in section headers produced
that the `binutils/testsuite/binutils-all/readelf.s-64' pattern template
does not match. While there has been a precedent it does not appear to
me that there is a clear advantage from adding more and more variations
to the template rather than forking the existing template into multiple
ones for a more exact match. So this is best deferred to a separate
discussion.
The MIPS reloc estimation issue is an actual bug in `objdump', which
discards a number of trailing entries from output here for n64 composed
relocations:
DYNAMIC RELOCATION RECORDS
OFFSET TYPE VALUE
0000000000000000 R_MIPS_NONE *ABS*
0000000000000000 R_MIPS_NONE *ABS*
and consequently `ld/testsuite/ld-mips-elf/reloc-estimate-1.d' does not
match even though ELF output produced is correct according to `readelf':
Relocation section '.rel.dyn' at offset 0x10400 contains 2 entries:
Offset Info Type Sym. Value Sym. Name
000000000000 000000000000 R_MIPS_NONE
Type2: R_MIPS_NONE
Type3: R_MIPS_NONE
000000010000 000300001203 R_MIPS_REL32 0000000000010010 foo@@V2
Type2: R_MIPS_64
Type3: R_MIPS_NONE
As a genuine bug this has to be handled separately.
Co-Authored by: Maciej W. Rozycki <macro@orcam.me.uk>
bfd/
* config.bfd: Add `mips64*el-*-linux*-gnuabi64' and
`mips64*-*-linux*-gnuabi64' targets.
binutils/
* testsuite/binutils-all/mips/mips.exp: Handle `*-*-*-gnuabi64'
targets.
* testsuite/binutils-all/objcopy.exp: Handle
`mips64*-*-*-gnuabi64' targets.
* testsuite/binutils-all/remove-relocs-01.d: Likewise.
* testsuite/binutils-all/remove-relocs-04.d: Likewise.
* testsuite/binutils-all/remove-relocs-05.d: Likewise.
* testsuite/binutils-all/remove-relocs-06.d: Likewise.
gas/
* configure.ac: Handle `mips64*-linux-gnuabi64' targets.
* configure: Regenerate.
* testsuite/gas/mips/compact-eh-eb-7.d: Handle
`mips64*-*-*-gnuabi64' targets.
* testsuite/gas/mips/compact-eh-el-7.d: Likewise.
ld/
* configure.tgt: Add `mips64*el-*-linux-gnuabi64' and
`mips64*-*-linux-gnuabi64' targets.
* testsuite/ld-undefined/undefined.exp: Handle
`mips64*-*-*-gnuabi64' targets.
* testsuite/ld-mips-elf/attr-gnu-4-10.d: Likewise.
* testsuite/ld-mips-elf/compact-eh6.d: Likewise.
* testsuite/ld-mips-elf/mips-elf.exp: Handle `*-*-*-gnuabi64'
targets.
This reverts commit 32f1c80375. It had
two unrelated changes lumped together, one of which changed the meaning
of the `mipsisa64*-*-linux*' target triplets, which was not properly
evaluated.
For example, objcopy --set-section-flags .data=alloc,large will add
SHF_X86_64_LARGE to the .data section. Omitting "large" will drop the
SHF_X86_64_LARGE flag.
The bfd_section flag is named generically, SEC_ELF_LARGE, in case other
processors want to follow SHF_X86_64_LARGE. SEC_ELF_LARGE has the same
value as SEC_TIC54X_BLOCK used by coff.
bfd/
* section.c: Define SEC_ELF_LARGE.
* bfd-in2.h: Regenerate.
* elf64-x86-64.c (elf_x86_64_section_flags, elf_x86_64_fake_sections,
elf_x86_64_copy_private_section_data): New.
binutils/
* NEWS: Mention the new feature for objcopy.
* doc/binutils.texi: Mention "large".
* objcopy.c (parse_flags): Parse "large".
(check_new_section_flags): Error if "large" is used with a
non-x86-64 ELF target.
* testsuite/binutils-all/x86-64/large-sections.d: New.
* testsuite/binutils-all/x86-64/large-sections.s: New.
* testsuite/binutils-all/x86-64/large-sections-i386.d: New.
* testsuite/binutils-all/x86-64/large-sections-2.d: New.
* testsuite/binutils-all/x86-64/large-sections-2-x32.d: New.
Test on:
mips64-linux-gnuabi64
mips64el-linux-gnuabi64
mipsisa64-linux-gnuabi64
mipsisa64el-linux-gnuabi64
mipsisa64r2-linux-gnuabi64
mipsisa64r2el-linux-gnuabi64
mipsisa64r6-linux-gnuabi64
mipsisa64r6el-linux-gnuabi64
Introduce
run_dump_test_o32l
run_dump_test_n32l
run_dump_test_n64l
Which use `-march=from-abi` for pre-R6 testcases,
like micromips/mips16e etc.
For cases doesn't use run_dump_test_*, we use
-mips32r2 for micromips32
-mips1 for mips16-32
-march=from-abi for testcases to o32/n32/n64 both/all.
Replace `addi` with `addiu` for some cases for both r6 and pre-R6.
Introduce some new testcases for r6 with FPXX/FP64.
Introduce new testcase: comdat-reloc-r6.
Skip `default` in mips_arch_list_matching if triple is mipsisa*, due to:
1)it will cannot match mipsr6@*.d: since mips32rN/mips64rN
will always be used, it won't be a problem.
2)some test think -march=mips64rN will alway true for mipsisa64rN,
which is not true now.
This patch fix testsuite for all r6-default gnu triples:
mipsisa32r6-linux-gnu
mipsisa32r6el-linux-gnu
mips-img-linux-gnu
mipsel-img-linux-gnu
mipsisa64r6-linux-gnu
mipsisa64r6el-linux-gnu
* od-pe.c: New file: Dumps fields in PE format headers.
* configure.ac (od_vectors): Add objdump_private_desc_pe for PE format targets. (od_files): Add od-pe for PE format targets.
* configure: Regenerate.
* Makefile.am (CFILES): Add od-pe.c (EXTRA_objdump_SOURCE): Likewise.
* Makefile.in: Generate.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new support.
* objdump.c (wide_output): Change from local to global.
* objdump.h (wide_output): Prototype. (objdump_private_desc_pe): Prototype.
* testsuite/binutils-all/objdump.exp: Add a test of the new feature.
96d6e190e9
There are some known limitations for now,
* Do not shrink the length of the uleb128 value, even if the value is reduced
after relaxations. Also reports error if the length grows up.
* The R_RISCV_SET_ULEB128 needs to be paired with and be placed before the
R_RISCV_SUB_ULEB128.
bfd/
* bfd-in2.h: Regenerated.
* elfnn-riscv.c (perform_relocation): Perform R_RISCV_SUB_ULEB128 and
R_RISCV_SET_ULEB128 relocations. Do not shrink the length of the
uleb128 value, and report error if the length grows up. Called the
generic functions, _bfd_read_unsigned_leb128 and _bfd_write_unsigned_leb128,
to encode the uleb128 into the section contents.
(riscv_elf_relocate_section): Make sure that the R_RISCV_SET_ULEB128
must be paired with and be placed before the R_RISCV_SUB_ULEB128.
* elfxx-riscv.c (howto_table): Added R_RISCV_SUB_ULEB128 and
R_RISCV_SET_ULEB128.
(riscv_reloc_map): Likewise.
(riscv_elf_ignore_reloc): New function.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_RISCV_SET_ULEB128, BFD_RELOC_RISCV_SUB_ULEB128):
New relocations to support .uleb128 subtraction.
gas/
* config/tc-riscv.c (md_apply_fix): Added BFD_RELOC_RISCV_SET_ULEB128
and BFD_RELOC_RISCV_SUB_ULEB128.
(s_riscv_leb128): Updated to allow uleb128 subtraction.
(riscv_insert_uleb128_fixes): New function, scan uleb128 subtraction
expressions and insert fixups for them.
(riscv_md_finish): Called riscv_insert_uleb128_fixes for all sections.
include/
* elf/riscv.h ((R_RISCV_SET_ULEB128, (R_RISCV_SUB_ULEB128): Defined.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
* testsuite/ld-riscv-elf/uleb128*: New testcase for uleb128 subtraction.
binutils/
* testsuite/binutils-all/nm.exp: Updated since RISCV supports .uleb128.
I noticed in the binutile Makefile that runtest is being invoked with
CC, CC_FOR_BUILD and other compiler related flags in the environment.
That doesn't work. Those variables ought to be passed on the runtest
command line.
After fixing that I had some fails due to binutils testprog.c now
being compiled with the default "-g -O2" picked up in
CFLAGS_FOR_TARGET. Hack around that by passing -O0.
Also, with the binutils testsuite now taking notice of CC_FOR_TARGET,
I found a couple of debuginfod.exp fails with one of my compilers that
happened to be built without --debug-id being enabled by default.
* Makefile.am (check-DEJAGNU): Pass $CC and other variable on
the runtest command line rather than futilely in the
environment. Add -O0 to CFLAGS_FOR_TARGET.
* Makefile.in: Regenerate.
* testsuite/binutils-all/debuginfod.exp: Compile testprog.c
with -Wl,--build-id.
For MIPS64r6 ports, Debian as an example, `mipsisa64r6el` is
used as the cpu name in triple.
Let's recognize them by `mips*64*(el)`.
For 64bit Ports, like Debian's mips64el and mips64r6el ports,
`gnuabi64` is used as the abi section.
Let's use N64 abi by default for the triple with gnuabi64.
Before commit:
commit 2438b771ee
Date: Wed Nov 2 15:53:43 2022 +0000
opcodes/mips: use .word/.short for undefined instructions
unknown 32-bit microMIPS instructions were disassembled as a raw
32-bit number with no '.word' directive. The above commit changed
this and added a '.word' directive before the 32-bit number.
It was pointed out on the mailing list, that for microMIPS it would be
better to display such 32-bit instructions using a '.short' directive
followed by two 16-bit values.
This commit updates the mips disassembler to do this, and adds a new
test that validates this output.
Insn width granularity being 16 bits, producing byte granular output
isn't very useful. With there being a way to specific otherwise
unknown insns to the assembler, use that same representation (to be
precise: its <length>,<encoding> flavor) for disassembly.
This adjusts the testsuite to get rid of a number of XPASSes that have
appeared. Someone might like to look into a better patch for the s390
change.
aarch64-pe XPASS: weak symbols
arm-nacl XPASS: rgn-over8
mcore-pe XPASS: ld-scripts/provide-8
mips64-linux-gnuabi64 XPASS: vers4
mips64-linux-gnuabi64 XPASS: vers4b
mips-linux-gnu XPASS: vers4
mips-linux-gnu XPASS: vers4b
s390-linux-gnu XPASS: undefined line
sh4-linux-gnu XPASS: --gc-sections with __start_SECTIONNAME
sh-coff XPASS: objcopy object (simple copy)
sh-coff XPASS: objcopy executable (pr25662)
binutils/
* testsuite/binutils-all/objcopy.exp: Don't xfail "simple
copy" and "pr25662" on sh-*-coff. Remove all non-ELF xfails
on "ELF unknown section type" test.
ld/
* testsuite/ld-elfvers/vers.exp (vers4, vers4b): Don't xfail
all mips, just xfail mips irix.
* testsuite/ld-gc/pr19161.d: Don't xfail sh.
* testsuite/ld-scripts/rgn-over8-ok.d: Don't xfail nacl.
* testsuite/ld-scripts/weak.exp: Don't xfail aarch64-pe.
* testsuite/ld-undefined/undefined.exp: Conditionally xfail
"undefined line" depending on gcc version for s390.
Delete a few files only used for obsolete targets, and tidy config,
xfails and other pieces of support specific to those targets. And
since I was editing target triplets in test files, fix the nm
alpha-linuxecoff fails.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
While working on disassembler styling for MIPS, I noticed that
undefined instructions are printed by the disassembler as raw number
with no assembler directive prefix (e.g. without .word or .short).
I think adding something like .word, or .short, helps to make it
clearer the size of the value that is being displayed, and is inline
with what many of the other libopcode disassemblers do.
In this commit I've added the .word and .short directives, and updated
all the tests that I spotted that failed as a result.
PR 25202
bfd * bfd.c (VerilogDataEndianness): New variable.
(verilog_write_record): Use VerilogDataEndianness, if set, to
choose the endianness of the output.
(verilog_write_section): Adjust the address by the data width.
binutils* objcopy.c (copy_object): Set VerilogDataEndianness to the
endianness of the input file.
(copy_main): Verifiy the value set by the --verilog-data-width
option.
* testsuite/binutils-all/objcopy.exp: Add tests of the new behaviour.
* testsuite/binutils-all/verilog-I4.hex: New file.
For now, xfail the new test. Some header/aux-header rewriting is
required at the very least.
* testsuite/binutils-all/rename-section-01.d: xfail xcoff.
