This patch adds support for GCS in AArch64 linker.
This patch implements the following:
1) Defines GNU_PROPERTY_AARCH64_FEATURE_1_GCS bit for GCS in
GNU_PROPERTY_AARCH64_FEATURE_1_AND macro.
2) Adds readelf support to read and print the GNU properties
in AArch64.
Displaying notes found in: .note.gnu.property
[ ]+Owner[ ]+Data size[ ]+Description
GNU 0x00000010 NT_GNU_PROPERTY_TYPE_0
Properties: AArch64 feature: GCS
3) Adds support for -z experimental-gcs linker option and document
all the values allowed with option (-z experimental-gcs[=always|never|implicit]).
-z experimental-gcs is equivalent to -z experimental-gcs=always and
when option is not passed in the command line, it defaults to implicit.
4) Adds support for -z experimental-gcs-report linker option and document
all the values allowed with this option (-z experimental-gcs-report[=none|warning|error]).
-z experimental-gcs-report is equivalent to -z experimental-gcs-report=none
and when option is not passed in the command line, it defaults to none.
The ABI changes adding GNU_PROPERTY_AARCH64_FEATURE_1_GCS to the
GNU property GNU_PROPERTY_AARCH64_FEATURE_1_AND is merged into main and
can be found below.
https://github.com/ARM-software/abi-aa/blob/main/sysvabi64/sysvabi64.rst
There are no legacy ldind nor ldabs BPF instructions with BPF_SIZE_DW.
For some reason we were (incorrectly) supporting these. This patch
updates the opcodes so the instructions get removed and modifies the
GAS manual and testsuite accordingly.
See discussion at
https://lore.kernel.org/bpf/110aad7a-f8a3-46ed-9fda-2f8ee54dcb89@linux.dev
Tested in bpf-uknonwn-none target, x86-64-linux-gnu host.
include/ChangeLog:
2024-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/bpf.h (enum bpf_insn_id): Remove BPF_INSN_LDINDDW and
BPF_INSN_LDABSDW instructions.
opcodes/ChangeLog:
2024-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-opc.c (bpf_opcodes): Remove BPF_INSN_LDINDDW and
BPF_INSN_LDABSDW instructions.
gas/ChangeLog:
2024-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* doc/c-bpf.texi (BPF Instructions): There is no indirect 64-bit
load instruction.
(BPF Instructions): There is no absolute 64-bit load instruction.
* testsuite/gas/bpf/mem.s: Update test accordingly.
* testsuite/gas/bpf/mem-be-pseudoc.d: Likewise.
* testsuite/gas/bpf/mem-be.d: Likewise.
* testsuite/gas/bpf/mem-pseudoc.d: Likewise.
* testsuite/gas/bpf/mem-pseudoc.s: Likewise.
* testsuite/gas/bpf/mem.d: Likewise.
* testsuite/gas/bpf/mem.s: Likewise.
Remove hosts/mipsbsd.h and scripttempl/mipsbsd.sc which are unused
after
commit 3596d8ceb2
Author: Alan Modra <amodra@gmail.com>
Date: Wed Apr 18 15:39:34 2018 +0930
Remove mips aout, coff, and pe support
bfd/
* hosts/mipsbsd.h: Removed.
ld/
* scripttempl/mipsbsd.sc: Removed.
This corrects a counting problem, where prior to relocate_section relr
encoded relative relocs were allowed when it was known they were on
even boundaries, but relocate_section can only put relative relocs
(non-relr) on eight byte boundaries.
PR 30824
* elf64-ppc.c (RELR_ALIGN): Define, use throughout.
(maybe_relr): New function, use throughout.
This fixes the ld "Handle no DWARF information" testcase. Which
currently fails on riscv because a local label name is assumed
to be the current function name.
bfd/ChangeLog:
* elfnn-riscv.c (riscv_maybe_function_sym): Also check
_bfd_elf_is_local_label_name.
Relocations installed by the BPF ELF backend were sometimes incorrectly
adding the symbol value to the relocation entry addend, when the correct
relocation value was already stored in the addend. This could lead to a
relocation effectively adding the symbol value twice.
Fix that by making bpf_elf_generic_reloc () more similar to the flow of
bfd_install_relocation in the case where howto->install_addend is set,
which is how it ought to behave.
bfd/
* bpf-reloc.def (R_BPF_64_ABS32, R_BPF_64_ABS64)
(R_BPF_64_NODYLD32): Set partial_inplace to true.
* elf64-bpf.c (bpf_elf_generic_reloc): Do not include the value
of the symbol when installing relocation. Copy some additional
logic from bfd_elf_generic_reloc.
gas/
* testsuite/gas/bpf/bpf.exp: Run new test.
* testsuite/gas/bpf/elf-relo-1.d: New.
* testsuite/gas/bpf/elf-relo-1.s: New.
When deleting NOP instructions addend by .align at second pass, this may cause
the PC decrease but the symbol address to remain unchanged due to section
alignment.
To solve this question, we subtract a maximux alignment of all sections like
RISC-V.
When -z mark-plt is used to add DT_X86_64_PLT, DT_X86_64_PLTSZ and
DT_X86_64_PLTENT, the r_addend field of the R_X86_64_JUMP_SLOT relocation
stores the offset of the indirect branch instruction. However, glibc
versions which don't have this commit in glibc 2.36:
commit f8587a61892cbafd98ce599131bf4f103466f084
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri May 20 19:21:48 2022 -0700
x86-64: Ignore r_addend for R_X86_64_GLOB_DAT/R_X86_64_JUMP_SLOT
According to x86-64 psABI, r_addend should be ignored for R_X86_64_GLOB_DAT
and R_X86_64_JUMP_SLOT. Since linkers always set their r_addends to 0, we
can ignore their r_addends.
Reviewed-by: Fangrui Song <maskray@google.com>
won't ignore the r_addend value in the R_X86_64_JUMP_SLOT relocation.
Although this commit has been backported to glibc 2.33/2.34/2.35 release
branches, it is safer to require glibc 2.36 for such binaries.
Extend the glibc version dependency of GLIBC_ABI_DT_RELR for DT_RELR to
also add GLIBC_2.36 version dependency for -z mark-plt on the shared C
library if it provides a GLIBC_2.XX symbol version.
* elflink.c (elf_find_verdep_info): Moved to ...
* elf-bfd.h (elf_find_verdep_info): Here.
(elf_backend_data): Add elf_backend_add_glibc_version_dependency.
(_bfd_elf_link_add_glibc_version_dependency): New function.
(_bfd_elf_link_add_dt_relr_dependency): Likewise.
* elf64-x86-64.c (elf_x86_64_add_glibc_version_dependency):
Likewise.
(elf_backend_add_glibc_version_dependency): New.
* elflink.c (elf_link_add_dt_relr_dependency): Renamed to ...
(elf_link_add_glibc_verneed): This. Modified to support other
glibc dependencies.
(_bfd_elf_link_add_glibc_version_dependency): Likewise.
(_bfd_elf_link_add_dt_relr_dependency): Likewise.
(bfd_elf_size_dynamic_sections): Call
elf_backend_add_glibc_version_dependency instead of
elf_link_add_dt_relr_dependency.
* elfxx-target.h (elf_backend_add_glibc_version_dependency): New.
(elfNN_bed): Add elf_backend_add_glibc_version_dependency.
ld/
* testsuite/ld-x86-64/mark-plt-1a.rd: New file.
* testsuite/ld-x86-64/mark-plt-1b.rd: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run -z mark-plt test for
GLIBC_2.36 dependency.
While having been moved a couple of times since its introduction in
f6c7c3e8b7 ("Referencing a function's address on PowerPC64 ELFv2"),
the wording has always remained the same. In particular ELFv1 and ELFv2
have always been the wrong way round.
This patch adds linker support to patch R_BPF_64_NODYLD32 relocations.
The implementation was based on comments and code in LLVM, as the GNU
toolchain does not uses this relocation type.
Also recognized are aarch64-*-gnu tagrets, e.g. aarch64-pc-gnu or
aarch64-unknown-gnu.
The ld/emulparams/aarch64gnu.sh file is (for now) identical to aarch64fbsd.sh,
or to aarch64linux.sh with Linux-specific logic removed; and mainly different
from the generic aarch64elf.sh in that it does not set EMBEDDED=yes.
Coupled with a corresponding GCC patch, this produces a toolchain that can
sucessfully build working binaries targeting aarch64-gnu.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
In commit 83c79df86b I removed configure tests for strtoull among
other library functions part of C99, but didn't remove what is now
dead code.
* bfd.c (bfd_scan_vma): Delete fall-back for strtoull.
