2011-01-07 Michael Snyder <msnyder@vmware.com>

* ada-lang.c: Comment cleanup, mostly periods and spaces.
	* ada-lang.h: Ditto.
	* ada-tasks.c: Ditto.
	* ada-valprint.c: Ditto.
	* aix-threads.c: Ditto.
	* alpha-linux-nat.c: Ditto.
	* alpha-linux-tdep.c: Ditto.
	* alpha-mdebug-tdep.c: Ditto.
	* alpha-nat.c: Ditto.
	* alpha-osf1-tdep.c: Ditto.
	* alpha-tdep.c: Ditto.
	* alphabsd-nat.c: Ditto.
	* alphabsd-tdep.c: Ditto.
	* amd64-darwin-tdep.c: Ditto.
	* amd64-linux-nat.c: Ditto.
	* amd64-linux-tdep.c: Ditto.
	* amd64-sol2-tdep.c: Ditto.
	* amd64-tdep.c: Ditto.
	* amd64-fbsd-tdep.c: Ditto.
	* amd64-nbsd-tdep.c: Ditto.
	* amd64-obsd-tdep.c: Ditto.
	* amd64-linux-nat.c: Ditto.
	* amd64-linux-tdep.c: Ditto.
	* arm-tdep.c: Ditto.
	* arm-tdep.h: Ditto.
	* armnbsd-nat.c: Ditto.
	* avr-tdep.c: Ditto.
	* bfin-tdep.c: Ditto.
	* bsd-kvm.c: Ditto.
	* c-typeprintc: Ditto.
	* c-valprint.c: Ditto.
	* coff-pe-read.h: Ditto.
	* coffreead.c: Ditto.
	* cris-tdep.c: Ditto.
	* d-lang.c: Ditto.
	* darwin-nat-info.c: Ditto.
	* darwin-nat.c: Ditto.
	* dbug-rom.c: Ditto.
	* dbxread.c: Ditto.
	* dcache.c: Ditto.
	* dcache.h: Ditto.
	* dec-thread.c: Ditto.
	* defs.h: Ditto.
	* demangle.c: Ditto.
	* dicos-tdep.c: Ditto.
	* dictionary.c: Ditto.
	* dictionary.h: Ditto.
	* dink32-rom.c: Ditto.
	* disasm.c: Ditto.
	* doublest.c: Ditto.
	* dsrec.c: Ditto.
	* dummy-frame.c: Ditto.
	* dwarf2-frame.c: Ditto.
	* dwarf2expr.c: Ditto.
	* dwarf2loc.c: Ditto.
	* dwarf2read.c: Ditto.
	* elfread.c: Ditto.
	* environ.c: Ditto.
	* eval.c: Ditto.
	* event-top.h: Ditto.
	* exceptions.c: Ditto.
	* exceptions.h: Ditto.
	* exec.c: Ditto.
	* expprint.c: Ditto.
	* expression.h: Ditto.
	* f-exp.y: Ditto.
	* f-lang.c: Ditto.
	* f-lang.h: Ditto.
	* f-typeprint.c: Ditto.
	* f-valprint.c: Ditto.
	* fbsd-nat.c: Ditto.
	* findvar.c: Ditto.
	* fork-child.c: Ditto.
	* frame.c: Ditto.
	* frame.h: Ditto.
	* frv-linux-tdep.c: Ditto.
	* frv-tdep.c: Ditto.
	* gcore.c: Ditto.
	* gdb-stabs.h: Ditto.
	* gdb_assert.h: Ditto.
	* gdb_string.h: Ditto.
	* gdb_thread_db.h: Ditto.
	* gdb_wait.h: Ditto.
	* gdbarch.sh: Ditto.
	* gdbcore.h: Ditto.
	* gdbthread.h: Ditto.
	* gdbtypes.c: Ditto.
	* gdbtypes.h: Ditto.
	* gnu-nat.c: Ditto.
	* gnu-nat.h: Ditto.
	* gnu-v2-abi.c: Ditto.
	* gnu-v3-abi.c: Ditto.
	* go32-nat.c: Ditto.
	* gdbarch.c: Regenerate.
	* gdbarch.h: Regenerate.

gdb/dsrec.c

@@ -97,7 +97,7 @@ load_srec (struct serial *desc, const char *file, bfd_vma load_offset,
 	/* Both GDB and BFD have mechanisms for printing addresses.
            In the below, GDB's is used so that the address is
            consistent with the rest of GDB.  BFD's printf_vma() could
-           have also been used. cagney 1999-09-01 */
+           have also been used.  cagney 1999-09-01 */
 	printf_filtered ("%s\t: %s .. %s  ",
 			 section_name,
 			 paddress (target_gdbarch, addr),
@@ -135,7 +135,7 @@ load_srec (struct serial *desc, const char *file, bfd_vma load_offset,
 		putchar_unfiltered ('#');
 		gdb_flush (gdb_stdout);
 	      }
-	  }			/* Per-packet (or S-record) loop */
+	  }			/* Per-packet (or S-record) loop.  */
 
 	if (deprecated_ui_load_progress_hook)
 	  if (deprecated_ui_load_progress_hook (section_name,
@@ -173,7 +173,7 @@ load_srec (struct serial *desc, const char *file, bfd_vma load_offset,
 }
 
 /*
- * make_srec -- make an srecord. This writes each line, one at a
+ * make_srec -- make an srecord.  This writes each line, one at a
  *      time, each with it's own header and trailer line.
  *      An srecord looks like this:
  *
@@ -190,9 +190,9 @@ load_srec (struct serial *desc, const char *file, bfd_vma load_offset,
  *
  *      Where
  *      - length
- *        is the number of bytes following upto the checksum. Note that
- *        this is not the number of chars following, since it takes two
- *        chars to represent a byte.
+ *        is the number of bytes following upto the checksum.  Note
+ *        that this is not the number of chars following, since it
+ *        takes two chars to represent a byte.
  *      - type
  *        is one of:
  *        0) header record
@@ -267,7 +267,7 @@ make_srec (char *srec, CORE_ADDR targ_addr, bfd *abfd, asection *sect,
       bfd_get_section_contents (abfd, sect, binbuf, sectoff, payload_size);
     }
   else
-    payload_size = 0;		/* Term or header packets have no payload */
+    payload_size = 0;		/* Term or header packets have no payload.  */
 
   /* Output the header.  */
   snprintf (srec, (*maxrecsize) + 1, "S%c%02X%0*X",
@@ -282,7 +282,7 @@ make_srec (char *srec, CORE_ADDR targ_addr, bfd *abfd, asection *sect,
   checksum = 0;
 
   checksum += (payload_size + addr_size + 1	/* Packet length */
-	       + (targ_addr & 0xff)	/* Address... */
+	       + (targ_addr & 0xff)		/* Address...  */
 	       + ((targ_addr >> 8) & 0xff)
 	       + ((targ_addr >> 16) & 0xff)
 	       + ((targ_addr >> 24) & 0xff));